At&t tilt BLACK SCREEN - Tilt, TyTN II, MDA Vario III Themes and Apps

I Dont Know What Happen to it i tuen it on nothing shows up on the screen sound works me hitting buttons works but no picture on screen not even boot screen is it bricked?? or is it trashed?? please help

Should have posted this in general. I'm sure someone will move it.

your screen may have gotten loose or the screen may have fried. i had to repair my broken screen and it wasnt so hard just had to be careful in doing it and putting it back together since you had to go take everything out o get to the main screen.if you got warranty go for it if not there is always ebay to get a screen.

Related

WSOD! Help!!

My tilt is acting very nasty lately. Over the past few weeks, I noticed that when I turned on the display, occasionally I would get something that looked like the static that you see on TV, but with colors. I would just turn off the screen, and turn it back on to clear it.
Now it's gotten worst! 98% of the time, it intermitantly gives me a blank solid white screen when I turn it on. Occasionally I can just turn to screen off, and on to reset it.
I'm running OEM WM6.1, and I've tried to reinstall the OS, but it didn't help. My phone has taken a beating, and the top corner has had a small crack in it over the past 2 months, but it didn't effect the touch screen, or picture. I also took off the cover to make sure the cables were all snug, and it didn't help.
Any suggestions?
Something got corrupted. If you search WIKI, it's call the 3 color screen stuck .. and you're better off posting at thread below. I hope someone can give you help (if you follow those steps and still no good)
As rule of thumb, do a lot of reading first
http://forum.xda-developers.com/showthread.php?t=423486
On a second thought, it might be the LCD itself broken ..
Oh, believe me.. I'm not one to turn to the forums without doing research myself! All the research I was coming up with seemed to point to a slightly different WSOD though. I think you are right about the screen being broken. I've reinstalled the software, and it acts up even when booting up!
Unfortunately, I'm not impressed with ANYTHING on the market to date! If I'm unable to fix this, I'll just go back to a RAZR until the next gen WM7 phones come out. (With a tilt screen of course!!)
Oh, and even though the screen goes white, it's not stuck, as it fully boots up; I can hear sounds, and even activate the touch screen.
Also, I forgot to mention.. the first problem I started experiencing was that my tilt would go back from landscape mode! It was like the video board was crapping out. I could even see a slight flicker in the display from the refresh rate.
hi i think you may need a new Need a new flex cable ribbon as i had the same problem once
Thanks Tayzaa, I think you could be on to something. I'll open it up and take another look!
Hi!
is this problem solved?
WSOD is bug of Hermes. I would know if kaiser have the same WSOD-bug with D-pad?

x1 screen isnt working..

so i dropped my x1 today on the corner(yea... thnx invisibleshield) and it got ruined. the screen itself just doesnt seem to work anymore, i take out the battery and put it back and try to turn it on and it only vibrates, the screen shows nothing. any help? thnx
remove the battery. Apply pressure, great one, on the slightly bulging part. this is the area where the main board connects to the screen. if it still wont work, bring it to the service center.
I have dropped mine, and i openned everything then miraculously it worked again.
okay, which slightly buldging part? i appreciate the help.
can anyone help? i realy dont want to open it and i dont have warranty.

[Q] Faulty Proximity sensor,is there a way to actually disable it?

Hey guys,sorry for bringing this up.
Whenever i dial,screen goes black and doesn't come back on.
If i place it flat on a table,then it gets lit but as soon as i rotate the device it goes black again.
My HD7 recently started having this problems...
It started happening after i replaced the micro sd inside with a bigger one.
So my concern is that somehow it moved or got dust when i removed the back plastic cover? Where is it placed anyway?
I tried hard resetting 2 times but nothing works. It would be cool if there was a registry or app to take control of it. Can somebody help?
PS. i cannot send it back because i live in Albania (no official htc shops either around here)
Thanks!
Hello,
The proximity sensor is located on the top left of the device, you can see it when viewed under a bright light. Have you applied any screen protectors which can interfere with them? Replacing the sd card should not have any effect on the proximity sensor. When you rotate the device when the call is placed, the screen should go black by default cause of the sensor
@rhn thank you for your reply.
My phone does not have any screen protector or cover of any kind. Also,if i rotate it while in call it still remains black. As soon as i press the call button,screen goes black and wont come back until the call is ended by the person on the other side.
Really really annoying... Oh sometimes it even flashes after the call has ended...
Sounds like a hardware fault ...have you tried updating your rom?You can find a compatible rom in the rom development subforum..
Yep,tried that too. Just updated today and still the same issue.
It also happened after i changed the micro sd,so maybe something has moved in there. There's no other way than try to open the device and check it out,i guess :/
If you can think of something else,let me know
Warranty
Warranty replacement worked for me.
http://forum.xda-developers.com/showthread.php?t=864311
Thanks bofett, i cannot get a replacement. Warranty for this phone was for 5 days!!! (stupid i know....i totally regret picking it up) So that means i'm screwed...
Thank god i still have my great HD2 so i can start opening this phone without fear

[Q] Need help after replacing my amoled screen

So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.
You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...
What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.

problem with replacement LCD+digitizer

Hello,
I know a lot of us are having problems with displays and digitizers and im wondering if anyone else has this problem. Yesterday i replced my screen because it had a dead zone. I booted up the phone and everything worked great until i locked the screen. When i pressed the power button to unlock it there was just a black screen with lots of white lines forming. Without fail the phone will do this. I restart and its fine but when i lock it, it gets screwy. I really need to get this working since i dont even have a backup phone right now. By the way the display is not oem its a knockoff.
Since you change your LCD....it might be a different panel from your original. Check your kernel or flash the kernel again.
Sent from My LG G2 LS-980 or LG G Pad 7.0 V400
Same thing happen to me about a month ago during my G2 screen repair. I bought mine on ebay from a seller that had sold hundreds of them, figured I couldn't go wrong. Unfortunatly I never figuered out why it was failing and just ended up returning it for a refund. The second screen I bought was from etradesupply and it worked perfectly. Hopefully someone has a fix for this weird issue.
I had that exct thing happen to me, well rainbow colored lines. I shattered the screen on a corner drop. I took it to Gopher Mods, they replaced the screen and within a few minutes it happened. They replaced it 2 more times and eventually the last time the screen popped out a little bit since they did not add enough glue/sticky tape inside and the lines dissapeared. They also gave me a full refund, with which I got another G2. So two working phones now lol.
Basically the screen might be pressed in too tightly causing the cable inside to be kinked too much. Its very easy to damage the video cable in this phone mind you.
Bmatthews11 said:
Hello,
I know a lot of us are having problems with displays and digitizers and im wondering if anyone else has this problem. Yesterday i replced my screen because it had a dead zone. I booted up the phone and everything worked great until i locked the screen. When i pressed the power button to unlock it there was just a black screen with lots of white lines forming. Without fail the phone will do this. I restart and its fine but when i lock it, it gets screwy. I really need to get this working since i dont even have a backup phone right now. By the way the display is not oem its a knockoff.
Click to expand...
Click to collapse
Try installi mg dorimanx's kernel which detects your panel type of search the thread for a kernel swap flashable. Your new panel may be of a different type causing the white lines.

Categories

Resources