Database Develop

qtek 9100 resets during boot

I tried to use imei-check to remove my cid lock but have run into problems.
first time I tried it things seemed to go fine but it never passed stage 1 and I was adviced on the computer screen that I should disconnect, reset computer and device and try again.
I tried but now the unlocker would report "communications errors" shortly after it had detected the phone as a Wizard.
Now the phone wouldn't boot (it resets itself after I get the Qtek logo screen with IPL (2.17) SPL (2.17) and OS (2.17.7.1))
I tried flashing with an original rom from Qtek (2.17.7.1) and it went well. I again tried the unlocker. exactly the same as the first time, and as the second time after that.
I again tried flashing with the original rom but now RUU wont put the rom on due to error 294 (invalid vendor ID).
the phone is still CID locked, the original rom wont install and it wont boot...
what the f*** should I do?
edit: after getting it to boot I find that gsm radio is not working, the phone does not charge etc.
Something went VERY wrong during the last flashing.
Edit: There seems to be an issue with my hardware. I dont believe that using imei-check software has anything to do with this. the flash-rom chip seems to be damaged.

KAISER TyTn II does not boot

hi all,
i have a big problem. after flashing my radio and unlocked by sim unlocker every thinh was fine. BUT, after i get all my files back by sprite buck up, i can not start the kaiser again. After rebooting, the boot process is going up to the gtc icon and thats it. i have alreade try it with the mtty.exe and also with hard reset but nothing helps.
PLEASE ANY IDEA?

What rom have you got, what radio version etc. Any more info will help.
My gut instinct is that you've got the wrong radio.

Help my wm6.5 does not respond

Hello,
Iam daniel. My english is not zo good but i will try.
I have flashed my phone with hardspl 3.56.
After that i installed wm6.5 from josh Build 21198
Then i start up my phone and every think look richt.
Then my phone ask for a restart, zo i start up and there was my problem, he doesn't start up.
I see thee first screen with red letters at the bottom and he does nothing.
Can you help me???

Have you tried a hard reset?
Also, did you CID unlock your phone as well? I believe you have to be CID unlocked to flash a 6.5 ROM on your phone.

Had a same matter last day ago, after re-flash, all working fine

I didn't unlock my phone whit cid...
for a hard reset is it the two buttuns (with the lines on it) near the phone buttom?
And a reflash how does that work?
I have no communication with my pc know because he crased in the screen when you starting up. It is the first screen you see when you restart your phone.

Ok, a couple of things... this is the wrong forum to be asking in, and I bet a mod is going to shut this down at some point. You should try posting in the forum for the ROM you flashed.
What you need to do is grab a stock WinMo 6.1 ROM and flash via the SD card method, that should get you up and running again.
Then, you will want to run Olipro's SIM/CID unlocker. What this will do is fully unlock your phone so you can flash any ROM, radio, SPL, any! Be careful, though, since not all ROMs are meant for Kaiser... so make sure you are flashing stuff meant for Kaiser.
Once you run Olipro's unlocker, you will want to re-flash the 3.56HardSPL, then a new radio, then go ahead and start flashing any ROM from the Kaiser section.
WinMo 6.5 ROMs reqiure you to be CID unlocked, and that is why you are stuck where you are.
And yes, you are right with how to do a hard rest.

Thanks! I try this tommorow if it works, if it doesn't work i will post my problem in the forum for rom. But hopfully it works because if cot know a nokia 6500 and i can't without my qwerty

Crazy diamond, trapped bootloader, rom and flash not works

Hi, i have a serious problem with my diamond...if someone knows how to fix it, i will be a lot of gratefull.
I have htc diamond movistar, with cooked rom 2.0.3 - BsB 1.1, during 4 mounths, 0 problems.
Yesterday, the diamond has reset 2 times...ok...but the third was the last. It died. Not turn on...never.
I can't revive them in any way. Do not start with any of my original 2 batteries .. It does not recognize the network stream, or the PC, ActiveSync does not recognize ... soft reset and hard reset doesnt rapair anything...
It starts 1 of 50 times, and when he makes, I only can put the bootloader mode, is the only thing i can do. And the bootloader recognice the usb mode. So i should can flash...no?
To send the diamond to technical service, i have to put the original rom and hardspl, but i can´t. All times that i try to flash, the process fail.
I had try to put the original spl (1.93), and the process arrives to 100%, but after the reset, bootloader says that i have 1.24 hardspl yet !!
And when i try to put any rom, cooked or original, always fails the process at diferent percentages...15%, 26%...65%... Always the same error, [302], connection fails.
So... is difficult that the diamond turn on, the rom doesn´t work and no pass of MOVISTAR logo...the bootloader works, but all the flashings that i try, fails.
¿¿How i can put the original spl and original rom to send to technical service??
THANKSSSS!!!

MDA Compact IV freeze on welcome screen

Gotta problem with my MDA Compact IV. To change original Polish carrier ROM, I've had flashed Hard SPL 1.93 by Olinex, Radio ROM 1.15.25.14 and Windows Revolution 7 ROM. Everything worked fine for about a week, then device started suddenly to freeze at random activities. Soft reset as well as hard reset didn't affect. Flashed another roms, radios and hardspls, but problem still remains, what's worse device gets freezed at welcome screen (but you can sync it throught AS). Flashing was always done with MTTY method and from Internal Storage.
Any idea how to go on with the device?