HI guys..
I have a weird problem..
Sometimes the screen shows up with a weird diagonal overlay. A couple of times the screen has just been blank, but with full touch screen capability. Anyone else experienced this?
I am presuming that its ROM related, as removing the battery for a few seconds seems to solve it (the blank screen issues) or soft off-ing and on-ing the device for the diagonal lines.
it is weird though!
I'd try hard resetting your phone, to test if it's gone. If it isn't after a hard reset, then I'd send it back.
Frozen screen
My TD2 was just a week old. After I installed a screen canvas software my screen did not react anymore except the hardware keys. I have no other choice but to hard reset my TD2. Another weird is that I was still not able to have my screen reactable in the connection setup once after the hard reset. I have to remove the SIM card and try another soft reset and this put back my TD2 to have the connection setup again without problem. I wonder if I have my TD2 back to service centre or to the shop for a return, but the device seems not having trouble now. Wish my TD2 can work without this issue again.
My TD2 sometimes have a VERY little white line in the very upper-left corner of the display.
If i rotate the screen in landscape mode, that line will remain in the upper-left corner, but in landscape (in vertical mode it will be in the upper-right).
And with Coreplayer i always see, in fullscreen mode, 2 purple lines or a green lines in the upper screen.
Even yours TD2? I tought it was finixNoverbattery, but even uninstaling it the problems are there.
Related
sincetoday a have this problem...when going to touch flow pictures and make a fingertip to the photo it goes big and in one ore two seconds it goes back to the touch flow screen by itself.
any chance to correct this ? scrolling through the pictures is no problem but when I open it it goes small by itself
someone the same problem ?
Try soft resetting your Diamond and see if it still happens...if it does then try a hard reset..if it still does it then it could be the phone is faulty and needs to be returned.
Mine doesnt do that as far as i can see.
So I looked at my screen tonight on my tilt and it was just black.
My Tilt screen has died before and it was a bright white, this is just black. When the machine goes into power standby the black gets a little darker. It responds to touch.
I was able to connect with MyMobiler and access the phone successfully but it's not longer working for some reason. I can still sync and browse my phone from windows.
I did a search and saw that restoring the phone to factory settings may fix this, but I can't seem to do it without a functioning screen.
Regardless, is this screen bricked? Should I try for another warranty replacement? I've already had one... this is stupid.
Any ideas? Thanks
Does anyone know how to at least reset factory defaults with no screen?
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Hard Reset.
I just replaced a screen in a Trinity (Dopod D810). The touchscreen initially wasn't calibrated correctly so I ran the alignment tool in the settings, and after a few attempts, I calibrated it properly and the touchscreen was working perfectly. Now the touchscreen is not working properly. The top half of the screen responds to touch, but no matter where I press in that region, the screen thinks I'm pressing the top-right corner. When I run the alignment again, it responds to all the touchpoints but it never successfully calibrates and it keeps bringing me back to the alignment screen.
The current settings in the registry entry for touch calibration are as follows:
484,558 244,286 263,815 750,820 707,295
I've found a few other threads here (the most helpful being http://forum.xda-developers.com/showthread.php?t=355010) and I've tried the settings from that thread. The screen seems more responsive, but still not correct because the bottom half hardly responds and the top half seems to respond when it feels like it.
Can someone please post their D810 touchscreen settings so I can try it? I've tried the settings from my Touch Cruise, but the screen is still doing weird things.
This is a customer's phone so I need to have this fixed ASAP.
I'm thinking that it may be a faulty digitizer, but that won't explain why it worked perfectly when I first calibrated it.
UPDATE: NOT FIXED yet, but now the backlight is dead. I just turned it off, and then turned it on again, but I can only see the screen content if I shine a torch onto the screen. The LCD hasn't leaked. The backlight just died and the connectors in the phone are fine. Perhaps this was a dodgy screen.
Any ideas?!
since the device has a recessed screen, take the cover off to get at it.
take a soft cloth or something and clean off all the garbage on the digitizer and back of the plastic. make sure everything around the lcd is free of dirt.
usually, if there is something pushing down on the digitizer while you calibrate it, it will totally bork the alignment over the course of 10 minutes to an hour.
my kaiser is currently having this issue, though i put it though alot more hell then i should have... so i suspect its suffering from other issues.
Hi,
I have a problem with the screen and I don't know if it a software bug of a hardware problem. from time to time the bottom of the screen stays "burned" on the screen. I meen you can see the icons of the tf3d in the bottom of the screen even if you are switching to other application. I tried to hard reset and it didn't help. I can see it in both sides of the bottom screen and it fade away in the middle.
Thanks,
Noam.
Hmmm sounds like a hardware/screen thing. Might be the pixels or something. For what its worth, try a hard reset. If not....try the service center.
My kaiser's touch screen suddenly has aquired an attitude. Some time it works, some it doesn't. When I touch nothing happens. Also when I slide open the keyboard, it works, but as soon as I close the keyboard, it stops working again. When I reboot, the screen works, but it stops after some time. Then it works if I open the keyboard. I have done hard reset, but that hasn't solved the problem.
Is there any thing I can do to fix it.
Now the touch works only if keyboard is open and doesn't work when closed. Any tips (already did hard reset twice).
With more research, the touch screen works but only when pressed very tightly at the point shown in figure (See red circle). Is there any solution to this ?
Will this get fixed if Change LCD ? Or can it be fixed by tightening some screws ?