I'm looking for a MFG SPL for playing with my Treo. Anyone has a link?
There's no MFG SPL for Treo 750. Perhaps you can modify HardSPL to accept AT commands. Also you can read something on HERMES section, both are the same processor and same radio (well, i flashed my Treo750 with Hermes radio and.. is working fine with no bugs/errors)
Ok, thank you.
Related
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy
I'm a newbie here. Please provide me the link or suitable Flash Rom for G3 Wizard O2 Mini S. My SPL/IPL is 1.03. I search for 1 day still cannot find it, thanks!
You wont find the ROMS itself anymore. Thanks to M$.
You can find a lot about good ROMs and customisations.
You should CID and SIM unlock your device, use the Wizard Service Tool for that
Then choose (WWE= English) and find the ROM you want (I use a modified official AKU 3.3, originally from T-Mobile Croatia)
Then Flash your device.
I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
ahdu said:
I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Click to expand...
Click to collapse
It is likely that you did not CID unlock the device. Just look at the second post and the stickies in this forum.
kernelguy
Hi
I just got a dopod c800 AKA p4350.
Its got WM 5 on it. I wanted to upgrade the same to WM6.
Have read the threads but couldnt figure the english rom version and also need some help on upgrading.
can someone point me to the right rom and the instructions.
thanks
Whatever you do, if your SPL is currently 1.XX do NOT hardSPL or use USPL. Use the official RUU to attemp to flash your device. IF it changes your SPL and IPL to 4.xx then you can use HARDSPL and USPL.
Other than that, you can download the official WM6 from the thread that's stickied that talks about all the ROMs.
my T-MOBILE wing is dead,i help the rom Includes IPL and spl.thks
the ruu includes IPL and SPL. If your phone is hardspl'd make sure you use USPL to flash
i need The original official'ROM,tks,
look on the xda-devs ftp or in the herald wiki for a link
we don't do all the work for you, you have to do it yourself
Hi, i search the spl 1.04.nbh because my phone had a corrupted radio and this is my last chance (with mtty, to reset the radio)
Anyone got it please?
(i generate one spl 1.04nbh but the size is 258ko. Other spl i've got have 256ko size :/)
I have the same problem with my Trinity test device: RADIO IMAGE IS CORRUPTED:
I have try the other SPL (Crashproof by des, Olipro 1.20 - 1.30 - SPL 1.07 - SPL 1.05) but only 1.04 have the commands avaiable for image radio in MTTY or PUTTY.
I need the 1.04 SPL Version for fix this problem.
Is there any person that can help me ?
Thank in advance
David