Sprite Backup / New Rom Question - Tilt, TyTN II, MDA Vario III General

Hello.... After checking out Sprite Backup's site.. it claims you can save your settings, upgrade your device, then restore your previous settings... Is this true?
I am still running the stock AT&T WM 6.0 rom (minus the bloatware wit hthe reset trick) and have many programs installed like TomTom, games, HTC Home, etc...
Also, I use a smaller GSM Service Provider (Einstein Wireless). Because of this, I have a lot of custom settings (Internet, MMS, proxy settings, etc). It would be GREAT if I could save all this data and just load it into whatever rom I wanted to try out.. It would mean it would not be an all day event to set up my phone...
To me, this would not make much sence that it would work because there are so many diffrent versions of WM 5-6.5, that just inserting the setting like a blanket can;t be a good idea... Just looking for input on this, and which, if any, would this work with for me? Thank you in advance for you input...

Teej53214 said:
Hello.... After checking out Sprite Backup's site.. it claims you can save your settings, upgrade your device, then restore your previous settings... Is this true?
I am still running the stock AT&T WM 6.0 rom (minus the bloatware wit hthe reset trick) and have many programs installed like TomTom, games, HTC Home, etc...
Also, I use a smaller GSM Service Provider (Einstein Wireless). Because of this, I have a lot of custom settings (Internet, MMS, proxy settings, etc). It would be GREAT if I could save all this data and just load it into whatever rom I wanted to try out.. It would mean it would not be an all day event to set up my phone...
To me, this would not make much sence that it would work because there are so many diffrent versions of WM 5-6.5, that just inserting the setting like a blanket can;t be a good idea... Just looking for input on this, and which, if any, would this work with for me? Thank you in advance for you input...
Click to expand...
Click to collapse
According to many actual users experiences, chances to migrate all your data and settings from WM 6.0 to WM 6.1 or higher are very low.
Sad but true

Thanks for the input.. but from what you are saying.. I would be able to do it from 6.1 rom to 6.1 rom or 6.2 rom to 6.2 rom ?

Teej53214 said:
Thanks for the input.. but from what you are saying.. I would be able to do it from 6.1 rom to 6.1 rom or 6.2 rom to 6.2 rom ?
Click to expand...
Click to collapse
If you are talking a custom ROM - I doubt it.
The chefs make lots of special accomodations and the ods that it will work out of the box on a custom ROM is not something that I would bet ANY money on at all.
Bill

Teej53214 said:
Hello.... After checking out Sprite Backup's site.. it claims you can save your settings, upgrade your device, then restore your previous settings... Is this true?
I am still running the stock AT&T WM 6.0 rom (minus the bloatware wit hthe reset trick) and have many programs installed like TomTom, games, HTC Home, etc...
Also, I use a smaller GSM Service Provider (Einstein Wireless). Because of this, I have a lot of custom settings (Internet, MMS, proxy settings, etc). It would be GREAT if I could save all this data and just load it into whatever rom I wanted to try out.. It would mean it would not be an all day event to set up my phone...
To me, this would not make much sence that it would work because there are so many diffrent versions of WM 5-6.5, that just inserting the setting like a blanket can;t be a good idea... Just looking for input on this, and which, if any, would this work with for me? Thank you in advance for you input...
Click to expand...
Click to collapse
Sprite back up will backup and restore your data from 6.0 to 6.1. But it will not restore your settings. Different roms, 6.0,6.1 and 6.5, have different registry settings and differing shortcut pathways and such, so while some restored settings will work, many will not . And your phone will freeze while Sprite tries to sort it all out. (from experience ) There is a way to upgrade sprite to 6.1 on the upgraded rom, to allow setting to be restored, but it never worked for me and I just gave up and restored apps manually.
Oh and FYI , this should have been posted in Kaiser General, it really has nothing to do with rom development or custom roms. Just trying to be helpful for future posting.

denco7 said:
Oh and FYI , this should have been posted in Kaiser General, it really has nothing to do with rom development or custom roms. Just trying to be helpful for future posting.
Click to expand...
Click to collapse
^^
Dave

Related

Molski's 3.0.0.0 AKU 3.2 Rom software issues

Folks lets try to get a listing of software that you may belive that causes problems with Molski's Rom. I think this will be benifical for newer users to be able to go to one place and see all of the software that we have experienced problems with so they do not have to.
If at all possible for every program that we list as a problem I would like to have an alternative.
From my experience.....
O2 sms plus (for mass sms messages) causes a problem with the native SMS software. It has been known to prevent you from reciving or send sms messages. I am currently hunting for another program but I have not had any luck.
Thanks to all the Chefs that keep us in some great ROMs, keep em comming!
I think we all know SPB time does not work...and man if you install it just go ahead and do a hard reset.
SPB time is one of my FAVORITES but if you want to keep the rom do not install it.
After installing my 8125 got so hung up I couldn't even do a hard reset...I had to reflash from bootloader.
pocketbreeze does the same thing
Sun'n'moon
http://forum.xda-developers.com/showpost.php?p=1090597&postcount=266
This is very strange I have been using this rom since it came out with out the autofill or the calender giving me any type of problem. What other software are you running?
Click to expand...
Click to collapse
Not running any other software, only what came default with Molski's ROM.
I hate when I need to Add recipient manually every time I start writing SMS's.
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
My plans for year 2007 are open, so calendar aint so big deal - but i'm still using latest Active Sync and still cant get it to syncronize past meetings.
I encountered problems with clock and date resetting after every time while takeing out battery. Also device stops responding randomly after some time of working in standby mode and nothing except taking battery out is making it to soft reset. But the second problem might be caused by programs I'm using... Do you have similar problems?
KFi said:
Not running any other software, only what came default with Molski's ROM.
I hate when I need to Add recipient manually every time I start writing SMS's.
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
My plans for year 2007 are open, so calendar aint so big deal - but i'm still using latest Active Sync and still cant get it to syncronize past meetings.
Click to expand...
Click to collapse
Try going through the whole cid unlocking again and use the tmobile 2.26 rom then install Molski's rom again. Let me know what happens.
shamus said:
I encountered problems with clock and date resetting after every time while takeing out battery. Also device stops responding randomly after some time of working in standby mode and nothing except taking battery out is making it to soft reset. But the second problem might be caused by programs I'm using... Do you have similar problems?
Click to expand...
Click to collapse
I have had this happen with the time and date going back to June 7th once I took the battery. I don't take the battery normaly so I just reset the time. Why is this a problem?
The system lockup is most likely software related, but what other software are you running. If possible I would try to reflash the Rom and install spb backup and backup after you install all the software that comes with the Rom that you use. Then install each additional software and due what you would normaly due when it locks up. If it works then backup again and so on and so on till you narrow the problem down.
This is what I do and it works for me but if there is an easier way that someone knows of please let us know.
This is the whole reason that I started this thread so we can learn from each others problems.
Hey guys I am new to the forum and I just did my first flash to my wizzard and I used this new 3.2 rom. I must say its amazing but I am having problems it keeps turning on by its self when I put it in suspend and the battery dies very fast and the phone book wont let me look up any names that start with V. Can you guys help me out with some advice?
For "Sun'n'moon" application, you can replace by "WeatherPanel" (www.marsware.net) very powerfull.
On my Wizard, 2 problems:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
- I don't like clock or date on my task bar, I want to remove it with "RegistryWizard" but when I choose "None" and restart, the sound and network icons are hidden by something: --> Can you help me too????
Molski's Rom is very fast when booting and is not too tunned! (good!!!). Thanks Molski for your work!!!
great rom so far only one minor prob.
1) no pRssReader. the today plugin causes a reboot. no big deal. must be badly written sw.
newbie2369 said:
Hey guys I am new to the forum and I just did my first flash to my wizzard and I used this new 3.2 rom. I must say its amazing but I am having problems it keeps turning on by its self when I put it in suspend and the battery dies very fast and the phone book wont let me look up any names that start with V. Can you guys help me out with some advice?
Click to expand...
Click to collapse
Gents 1st off lets stay on the topic.
Dude you must learn to use the search this issue has been addressed by others. Go the Main Molski 3.0.0.0 thread and look in there. If you still cant find it email me and I will help you the best I can.
ed_bracam said:
For "Sun'n'moon" application, you can replace by "WeatherPanel" (www.marsware.net) very powerfull.
On my Wizard, 2 problems:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
- I don't like clock or date on my task bar, I want to remove it with "RegistryWizard" but when I choose "None" and restart, the sound and network icons are hidden by something: --> Can you help me too????
Molski's Rom is very fast when booting and is not too tunned! (good!!!). Thanks Molski for your work!!!
Click to expand...
Click to collapse
I haven't used the prssreader as of yet but this also came up with Jose's AKU3.2 rom. We have to see what the gods sugest on that one.
Can you take a screen shot so I can see what your talking about?
Its the weekend so I will be working in my nite life bussiness so give me a few days. to respond. Or see if someone else can help as well.
KFi said:
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
Click to expand...
Click to collapse
Try these cabs... Works fine for me (swedish)
ed_bracam said:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
Click to expand...
Click to collapse
I've attached a copy of Qmail. It handles RSS feeds nicely. It will also handle email. Basically, its a Japanese version of Outlook Express. Good thing is that the program is written in English. But, there is NO documentation in English. You'll have to figure out how to make it work on your own.
There is not setup. Just unzip it and copy it to your storage card. Then just run the "q3u.exe" program.
Can not use slide-out keyboard for cyrillic characters
Guys,
The rom is great! Molski, Faria - thank you very much.
The biggest problem for me is that I can not type Cyrillic characters using the slide-out keyboard. The standard way to set it up (by setting \\HKCU\ControlPanel\Keybd\Locale) - does not work with this ROM.
Any suggestions would be very appreciated.
Hey man, It will not so bad.
Do you get back you backup by SPB Backup? The backuping programs sometimes damage devices GSM. Tray Hard reset and than it will be IMHO OK
I dont belive, that that ROM is such unusefull like you write.
vippie said:
You point the wrong way, I think it's more a cingular issue. I'm very glad with Molski's roms until now. They work perfectly fine overhere.
Click to expand...
Click to collapse
Howdy. I just want to make sure I read this correctly. So, you have T-Mobile (from your profile) and Molski's ROM 3.0.0.0 and you have not lost -any- calls/VM Notifications at all? I mean, it took me a few days to realize I was missing calls (when people started complaining at me thinking I was screening).
I am in Cingular, and if you are not missing calls (please, try to make sure as accurately as you can...) do report back, as this would be a huge pointer and there are quite a few of us stuck with this awesome ROM.
[btw: I LOVE this ROM and have no plans to go back... we all just need to figure this one out]
RE: the topic of this thread, this ROM seems 100% stable for me, battery usage and all. The actual thread for the radio/missed calls is: http://forum.xda-developers.com/showthread.php?t=287087
Voice Command 1.5
Cant say if it was directly related to the ROM, but Voice Command 1.5 would work for all but contacts and phone. If Contacts or Phone were enabled, VC 1.5 would fail to start.
Upgrade to VC 1.6 solved problem, and 1.6 is waaay better anyway.
Thanks, Molski for this ROM, I'm lovin it.
tharryman said:
Cant say if it was directly related to the ROM, but Voice Command 1.5 would work for all but contacts and phone. If Contacts or Phone were enabled, VC 1.5 would fail to start.
Upgrade to VC 1.6 solved problem, and 1.6 is waaay better anyway.
Thanks, Molski for this ROM, I'm lovin it.
Click to expand...
Click to collapse
This is a compatability issue due to the fact that the Contacts Database was changed in AKU 3.x

My Data on Himalaya after upgrading

I am planning to upgrade my himalaya from wm6 to wm6.1.
I never done this before.
Will all my sms, outlook email, and contacts lost after the upgrade?
Do I need to backup all the sms and restore them again after upgrade?
and Install all the software/games all over again?
Thanks..
data will be gon
really
so backup
some programs on sd card may still work like all my games dont require anything but whats in their dirs so and they are on the sdcard so all i need to do is make new shortcuts to them
Yes you will looooose alll of ur data while upgrading the ROM
To Backup You PIM...use PIMBackup
AS for the software..remeber the names and search for them else post them here so we can help u find them
Happy WM 6.1 Flashing
Ok Thanks!
Flashing is fun and the old Hima is better as touch afterwards.
ather90 said:
Yes you will looooose alll of ur data while upgrading the ROM
To Backup You PIM...use PIMBackup
AS for the software..remeber the names and search for them else post them here so we can help u find them
Happy WM 6.1 Flashing
Click to expand...
Click to collapse
He is right works fine, no probs. Dare, and you will get a better performance with some progis eg SCLPC Cube as the original on my friends Touch.
Touchscreen sensivity is better and it is a lot larger than his. If you try to use it with ugly fat little fingers you really get the funktion you want instead of popping up everything what is nearby when your finger left the surface.
The best thing on all of it is: It´s all in here. Use the search buttons, (both of them) and if it seams as if it is not---ask and you get help, that´s for shure.
I believe,Himas are ifone killers. And thank you, to all those heroes, who make this possible and let it happen. I think, I´ve got a long list of names for donations.
BTW: It is nice to be importand --- but is is more importand to be nice.

cabs for WM6.0 OK for 6.1?

I've finally decided to move up to WM6.1 on my TyTN II.
My question is, would the cab files I currently have installed on my unit (with WM6.0) still work once I upgrade to 6.1?
The most important programs I want re-installed are primarily the TouchFLO upgrades (TouchFLO cube, Random Access, Task Manager etc) and the media upgrades (HTC Album and Camera; TCPMP).
Also, am I right in assuming all the standard programs that were installed in my phone when it was new (Mobile Office, WMP, Adobe Reader, etc) will also be in the 6.1 installation pack? I'll be using the WM6.1 I downloaded from the HTC e-Club site.
'appreciate inputs
TIA
My question is, would the cab files I currently have installed on my unit (with WM6.0) still work once I upgrade to 6.1?
Click to expand...
Click to collapse
Not sure, but probably most of the yes, it was the case when I did it. You would need to reinstall these cabs because programs can't be correctly restored when doing a ROM upgrade, even with programs like Sprite Backup.
The most important programs I want re-installed are primarily the TouchFLO upgrades (TouchFLO cube, Random Access, Task Manager etc) and the media upgrades (HTC Album and Camera; TCPMP).
Click to expand...
Click to collapse
Task Manager, HTC Album and Camera are included. I am not using the others. If you do a search on the forum and to be sure, you will probably find these programs updated and also in 6.1 cooked ROMs.
Also, am I right in assuming all the standard programs that were installed in my phone when it was new (Mobile Office, WMP, Adobe Reader, etc) will also be in the 6.1 installation pack? I'll be using the WM6.1 I downloaded from the HTC e-Club site.
Click to expand...
Click to collapse
Yes, in some cases updated versions will be installed plus a few improvements that you can find here
http://forum.xda-developers.com/showthread.php?t=375979 and by searching. I didn't miss any previous WM 6.0 programs after the upgrade.
I strongly recommend a full backup before upgrading.
I hope you don't use GPS then
rigelstuff said:
I've finally decided to move up to WM6.1 on my TyTN II.
My question is, would the cab files I currently have installed on my unit (with WM6.0) still work once I upgrade to 6.1?
Click to expand...
Click to collapse
I don't use any of those cabs but some of them seem to have WM 6.1 compatible versions from searching here. You do realise that many people have had issues with GPS performance since upgrading to WM 6.1 from 6.0. Personally I wish I'd held off until HTC had really sorted these problems out (they still haven't) but now I've done it there's no going back (unless I want to send the phone back to HTC for them to flash it to the original configuration or risk voiding the warranty if I do it myself).
Also, am I right in assuming all the standard programs that were installed in my phone when it was new (Mobile Office, WMP, Adobe Reader, etc) will also be in the 6.1 installation pack? I'll be using the WM6.1 I downloaded from the HTC e-Club site.
Click to expand...
Click to collapse
Thats where I got mine from and yes those programs are still there, as mentioned already, some are improved.
Further to the suggestion anoano made about backing up, make sure your backup software is up to date enough to be able to restore the files you need to a newer OS. Some older versions have problems with restoring to a different OS than that used to create the backup. Check the backup software makers website if in doubt.
most cabs are universal among WM5,6 and 6.1. if they weren't then the description,filename or faq would mention if it was only for a certain version of WM
Thanks guys. This forum is the best!
Flying Kiwi, you're now two for two with me I wouldn't have known about the GPS issue if not for this forum. What GPS performance issues do you mean? I don't really use the GPS, but it would be a bummer to eventually need it, and for it not to work. I mean, I did pay for the hardware right? Any signs of HTC working this out?
gps works but it can be slow at times whether starting up,talking with satellites, etc. most of the gps issues are either applications issues or the radio
rigelstuff said:
Flying Kiwi, you're now two for two with me
Click to expand...
Click to collapse
Not sure what that means, sounds like a supermarket special offer gone wrong
I wouldn't have known about the GPS issue if not for this forum. What GPS performance issues do you mean?
Click to expand...
Click to collapse
The ones that are also detailed in this forum, both in this thread *Hopeless* GPS after 6.1 Update? and elsewhere. This thread covers it quite well (apart from the reference to quick GPS being the culprit even though a radio change makes a big difference).
I don't really use the GPS, but it would be a bummer to eventually need it, and for it not to work. I mean, I did pay for the hardware right? Any signs of HTC working this out?
Click to expand...
Click to collapse
I think the first step is to get them to even acknowledge it as an issue. Let us know what HTC say to you about it (or the carrier if it's a carrier provided device). Just mention exactly what you've told us here that you're considering using the WM 6.1 update but that you have read online about major problems with GPS performance afterwards.
good work with this post; very helpful.
Flying Kiwi said:
Not sure what that means, sounds like a supermarket special offer gone wrong
Click to expand...
Click to collapse
Sorry, must've said that wrong
What I meant was, that's my second post that you answered
I'll check out that post you mentioned and will contact HTC as well.
Much thanks!

How to back up settings when upgrading OS?

Hi all,
I've googled a bit for this, but can't find a decent answer. What I'm looking for is a way to back up not just my contacts etc, but also settings, installed programs and the like, that will work across an OS upgrade to WM6.1
Basically I'm running an Orange WM6.0 ROM, and want to upgrade, but don't want to have to reinstall all my various programs, connection settings, SMSs etc etc.
Spb backup now claims that it works across ROM upgrades - does that stretch to OS upgrades? Any other way of doing it?
You need a program that will do a full system backup. I used to use Sprite and have recently switched to SPB and it really works wonders.
mmm... I looked in more detail and it looks like spb doesn't work when you upgrade the ROM... what it can actually do is a system restore. Any other ideas?
they're all really predicated on restoring things based on the same rom or saving you from a hard reset. nothing is going to plug back your installed programs, or else projects like the SASHIMI to sleuth's SDconfig would have no point.
there are programs like PIMbackup that will save contacts and the like, but nothing will bring force and upgraded rom to look and work exactly like a previously fully-installed-to-your-liking rom
nickd79 said:
mmm... I looked in more detail and it looks like spb doesn't work when you upgrade the ROM... what it can actually do is a system restore. Any other ideas?
Click to expand...
Click to collapse
Not true. It's not recommended but it doesn't mean that it can't be done. I just upgraded to another ROM and pulled a backup from a previous ROM and used the "ROM upgrade option" which worked great.
Fair point bravo; I was really wondering whether it was possible to (for example) save the connection settings to avoid me having to go through that palaver again. SMS's and outlook data are saved by most programs; and I can reinstall most other programs without too much difficulty.
Not to worry - thanks for the help

info about x04ht (japanese softbank diamond)

it's been a couple of days since i bought this device, and i thought i should summarize some findings.
1) you cannot skip autorun process. if you soft reset during autorun, the device will start the setup process from the beginning.
2) if you turn off security in registry (HKLM/Security/Policies/Policies/1001), it will refused to connect to desktop pc. you need to leave the security setting non-0, if you need to sync with your pc all the time.
3) sspl does work although it gives you a black screen.
http://forum.xda-developers.com/showthread.php?t=408621
4) softbank ap is hidden. you can make it visible, with the usual trick of ConnSBM and wifiwake.
5) internet sharing is removed out of rom as usual.
6) mms client is made by arcsoftware, and integrate to messaging. but this app doesn't seem to work without softbank certificate.
7) it seems like most of the oem apps are signed by softbank, and they don't run without the certificate.
8) good news is the japanese thumb input works without certificate so that it can be run on other wm6.1 vga machines.
This is a very important post -- thanks so much for being a Guinea Pig! I was going to get the Raphael (X05HT) when it comes out in early December, but may reconsider if it is not possible to even upgrade a rom. (the Diamond/Rapheal are very similar). However, before we come to that definite conclusion, can you describe the problem with sspl? What is the error? Are you trying to upgrade using windows xp or vista? As much information as possible would be helpful. I am sure somebody here will be able to solve this!
As far as it being locked goes, I was sort of expecting that (After the Hermes fiasco). My main irk though, is possibly not being able to upgrade even a rom....
One more thing: how is input using the keyboard? Does it do a good job?? (Especially in Japanese). That was one reason I was going to wait for the X05HT -- not to mention it having more memory to work with. Cheers!
Not 100% related, but I recommend the Emobile version of this phone. I still have a Softbank phone, which I now use exclusively with a white plan to talk to my wife, but I much prefer the Emobile packet-hodai plan to the gimped Softbank version. With my softbank phone, packet-hodai only covers sms/mms and Yahoo mobile browser, if I used the "PC site browser" I could get charged a lot more.
Anyways that thread if anyones looking for a Diamond that is easily ROM upgradeable in Japan (believe it's also coming out on DoCoMo): http://forum.xda-developers.com/showthread.php?t=440684
tora201 said:
can you describe the problem with sspl? What is the error?
Click to expand...
Click to collapse
there is no error. sspl starts, but it does not go to the bootloader screen (the tri-color screen), but remains blank. the backlight is still on, but the screen is totally black.
tora201 said:
Are you trying to upgrade using windows xp or vista?
Click to expand...
Click to collapse
tried on both.
tora201 said:
As much information as possible would be helpful. I am sure somebody here will be able to solve this!
Click to expand...
Click to collapse
i think so, too. but i am not sure which part of the phone is interfering sspl...
tora201 said:
One more thing: how is input using the keyboard? Does it do a good job?? (Especially in Japanese). That was one reason I was going to wait for the X05HT -- not to mention it having more memory to work with. Cheers!
Click to expand...
Click to collapse
you mean, software keyboard? finally, it has japanese ezinput with japanese/english dictionary so you can type both japanese and english. the difficult thing with this thumb input is switching between words and numbers. the mode changes like alphabet(english only)-number-kana-katakata. so it is a little troublesome to switch english/japanese/number... better use qwer software keyboard to type passwords or email addresses.
it is kinda slow, and seems a little unstable. need to find a way to burn my own rom...
Did you read this? http://forum.xda-developers.com/showthread.php?t=440684&highlight=emobile
Emobile also carry the same phone. Especially, see post 3.
Hopefully are able to solve this and tell us how you did it. Good luck and keep us informed. I look forward to having the same problems with my new X05HT in a few weeks..... :-D
Edit: or try this to unlock it: http://www.mobilefixed.com/shop/pro...id/39?osCsid=06590ca850536441a4721bc41a6d2fd9
I read elsewhere in this forum that it works.
i should have read the threads more carefully. i could install hard spl! the black screen was ok.
http://forum.xda-developers.com/showthread.php?t=408621
So you solved it? No problems? Let us know how a new rom goes! For Japanese input go here for a one cab install of the latest IME. http://forum.xda-developers.com/showpost.php?p=2905264&postcount=1
As for your data connection installation (should give access to unlimited packet rate, too) go here: http://forum.xda-developers.com/showthread.php?t=441400
Do let us know how it goes with a new rom. Speed better? More stable? Amount of free memory better? etc. Cheers!
tora201 said:
So you solved it? No problems? Let us know how a new rom goes! For Japanese input go here for a one cab install of the latest IME. http://forum.xda-developers.com/showpost.php?p=2905264&postcount=1
As for your data connection installation (should give access to unlimited packet rate, too) go here: http://forum.xda-developers.com/showthread.php?t=441400
Do let us know how it goes with a new rom. Speed better? More stable? Amount of free memory better? etc. Cheers!
Click to expand...
Click to collapse
i created a test rom based on the official htc wwe rom, and successfully burnt it on my x04ht! the original x04ht rom gives you only 20+mb free ram, but this wwe rom gives you about 50mb free ram. also, touchflo responds much faster!
as for japanese input, i am thinking about copying ime+ezinput from the softbank rom which i backed up.
will report more when i am done with my own customized rom.
i could successfully rebuild x04ht rom from the dumped raw files!
summary can be found here.
http://forum.xda-developers.com/showthread.php?t=452591
qtotter said:
as for japanese input, i am thinking about copying ime+ezinput from the softbank rom which i backed up.
will report more when i am done with my own customized rom.
Click to expand...
Click to collapse
Did you ever do this? If so, could you please provide a cab? I am also trying to do a similar thing for my X0ht. The IME in the new models is a lot better than the old x01ht one. There are also plently of others who would love a cab if you can do it:
http://forum.xda-developers.com/showthread.php?t=445550&page=2&highlight=x05ht
Oh, and did you ever work out the settings for Arcsoft so we can use mms? It is exactly the same for the x05ht. (I really don't want to have to use mmslite after I flash it to English).
Best!
tora201 said:
Did you ever do this? If so, could you please provide a cab? I am also trying to do a similar thing for my X0ht. The IME in the new models is a lot better than the old x01ht one. There are also plently of others who would love a cab if you can do it:
http://forum.xda-developers.com/showthread.php?t=445550&page=2&highlight=x05ht
Oh, and did you ever work out the settings for Arcsoft so we can use mms? It is exactly the same for the x05ht. (I really don't want to have to use mmslite after I flash it to English).
Best!
Click to expand...
Click to collapse
first, i thought i would use my x04ht with a wwe rom cooked with japanese functionality and apps from x04ht. however, i have changed (or had to change) my strategy since many oem applications in x04ht including arcsoft mms are security signed and cannot be ported easily, which means they do not run on other roms without softbank certificate.
it was a little time-consuming for me to figure out how certificate works, so i figured out how to port sys & xip from newer roms to x04ht instead. my x04ht is still japanese, but os is from a newer build with softbank certificate and "full wm6.1 functions."
having said that, i think it is possible to change the language of the rom quite easily once you can dump the rom and cook it yourself. the language is simply a matter of mui files and [HKEY_LOCAL_MACHINE\MUI]. all 409 (english) muis are available from any shipped wwe roms, anyways.
as mentioned above, i have not figured out how to port oem apps without softbank certificate yet. also, i don't have dev environment to make a cab myself.
additionally, i found out the slowness of x04ht is due to default disk cache set 0. gps takes dozens of minutes to start working, which is almost useless. i tried to use it last night, but it was searching the satelites all the time. finally, gps started working when i finally got to the place i wanted to go to. i guess i need to replace the radio rom, but i have not figured out how to make a radio rom backup yet.
also there seems to be some memory leak, but i don't know whether it is the rom or htc apps... free ram of my x04ht is currently about 10 mb after one day. this is unbelievably bad.

Categories

Resources