Related
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
you need to flash an official rom first, or a custom rom with updated bootloaders
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
__s said:
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
Click to expand...
Click to collapse
This is karma in action.
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
__s said:
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
Click to expand...
Click to collapse
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
dreamteam3x said:
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
Click to expand...
Click to collapse
thats what i did, everything is updated as my signature shows. thanx anyway
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
flash an official rom, then flash a custom rom
or maybe try downgrading to a 1.xx rom, then reflash and official rom, then flash a custom rom....
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
dreamteam3x said:
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
Click to expand...
Click to collapse
thanx ppl, but as said i did all this , everything is fine, im testing faria's rom atm, trying to figure out how to setup PAN, and a2dp seems have some problem too, but i think i'll manage this.
oops , its not allright, faria's rom flashed, os version is correct(build 3.2.0), but alot of things not working, i guess it is becuz of ipl 1.01 version, i need both of em to be 2.xx, i'll try to downgrade to 1.01 ruu costom rom, we'll see what will happend.
__s said:
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
Click to expand...
Click to collapse
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
shogunmark said:
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
Click to expand...
Click to collapse
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
vseehua said:
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
Click to expand...
Click to collapse
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
shogunmark said:
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
Click to expand...
Click to collapse
I see... I am just thinking that these chips might be BGA chips, and hence can't be desoldered easily...
vseehua said:
I see... I am just thinking that these chips might be BGA array chips, and hence can't be desoldered easily...
Click to expand...
Click to collapse
didnt think of that, you might have a point there
The problem is that __s(tupid) just rushes in and doesn't read anything before flashing 'til the cows come home.
One clean guide. Thanks very much for this.
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Goibnui said:
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Click to expand...
Click to collapse
I think ur phone is still not unlocked,download WST Tool from the link below and check if it is CID unlocked,if not ,go through the unlocking method again:-
http://forum.xda-developers.com/showthread.php?t=329170
ur IPL1.5 & SPL 3.08,
keep on trying flashing button rom 1.05 a couple of more times u'll get both 1.05 or u may try this rom,it might do the trick:-
Xda_MiniS_LaunchROM_v154102
but personally, i believe ur phone is not cid unlocked,check it out
Hello, I have a diamond with a stock 1,93 SPL and would like to know if it is possible to install a 1,93 hard spl and how to do it and if possible where to find it
thx in advance
skyhacker said:
Hello, I have a diamond with a stock 1,93 SPL and would like to know if it is possible to install a 1,93 hard spl and how to do it and if possible where to find it
thx in advance
Click to expand...
Click to collapse
Yes it's possible, 'cause this is what I did.
Make a search on the forum or go to the Diamond wiki, you'll find 1.93 olinex with all explanations you need for install.
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Ikkari said:
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Click to expand...
Click to collapse
thats the problem
i dont know how?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Just look in the first post under:
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
very strange
its working now
just needed a hard reset!
thanks for your help
edit------------
scratch that, its displaying them stupid colours again
GREAT!
m.r.davies said:
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
Click to expand...
Click to collapse
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Ikkari said:
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Click to expand...
Click to collapse
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
m.r.davies said:
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
m.r.davies said:
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Click to expand...
Click to collapse
1. dnload the stock spl from the said thread.
2. dnload the hspl 1.56 olinex wrapper
3. connect ur fone to pc in the bootloader mode.
4. run the hspl 1.56 olinex wrapper and do nothing to the onscreen utility.
5. wait fr the files to be xtracted in the window from where u ran the hspl wrapper.
6. replace the self extracted ruu_signed.nbh with the stock spl 1.15 that u downloaded.
7. continue with the ruu utility.
thats all thts needed..
ultimatepichu said:
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
Click to expand...
Click to collapse
Thanks
yes you're right, it solved my problem
the reason i didn't try in the first place was becuase the title said HARD SPL and i didn't want to mess it up as i used USPL
i used Restore_Stock_SPL_115.zip and swapped the nbh file after initilizing installation (after extraction) and it worked great
thanks for all your help guys!!!!!!
i really appreiciate it
My god, I was feeling your anguish while reading this topic until the end...
Black Antitoon said:
My god, I was feeling your anguish while reading this topic until the end...
Click to expand...
Click to collapse
I eventually went to bed at 2:30am
all sorted now and got my new phone!
woohoo
how do you find out what spl you have ?
can someone breifly explain to me what SPL is
and i right in thinking SPL is what can make a brick ?
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Downgrade to Hard SPL from Danger SPL??
AdrianK said:
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Click to expand...
Click to collapse
When I rooted my phone I installed Haykuro's danger spl with the latest radio. I didn't know it can potentially brick your phone (hence the danger part lol). I'm running cyanogen 4.0.1 and it's working just fine so far but I had 3 questions
1) Is Hykuro's Danger SPL only risky during the installation process or can it still possibly brick your phone after a successful installation (in other words, elaborate on the "danger" part please)
2) Can I downgrade to Hard SPL after installing the Danger SPL
3) How would I downgrade to Hard SPL?
Thanks guys!!!
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
rondey- said:
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Click to expand...
Click to collapse
AdrianK said:
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
Click to expand...
Click to collapse
Thank you guys! In that case I'll just keep H's SPL seeing that I already installed it successfully without bricking my phone (yay)
Really appreciate both of your time!
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Unless you are Unrooting and flash the original spl. I've done this many times so I know it works.
Does SPL: 1.33.2005 help the regular ROMS run better (Cyanogen's)?
I use dxTop, seems to run out of memory quickly.
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Thanks for the warning!
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
sasa3791 said:
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
Click to expand...
Click to collapse
If you didn't downgrade to RC29/7 then you should have the 1.5 radio. Check by going to Settings > About Phone and baseband version. It should be 2.22.19.26I.
I think you can just flash HardSPL as update.zip as you are, but I' not completely sure...
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I swear I've heard people say they have, but dowgrading the radio after installing Danger SPL did cause bricks...
I'll go check
You WILL brick your phone if you attempt to downgrade your radio after flashing the new SPL or if you do not have the latest radio installed before flashing the new SPL
Click to expand...
Click to collapse
Hmm can't find anyone that said they did :-(
FYI
FYI
@Adrian K and nephron
When I unrooted my spare G1, I got it completely back to stock (circa October original shipment stock)
I downgraded my SPL successfully from the danger SPL all the way back to the original SPL. Also when I downgraded back DREAIMG.nbh, I confirmed at the time that the radio downgraded with it. My original post was on the unlockr.com when I was trying to help David of unlockr.com with some tutorials.
My original quote from unlockr
BTW: I have confirmed via the bootloader that the radio DOWNGRADES back to stock by applying the DREAIMG.nbh update FYI
From the bootloader I am now at
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Click to expand...
Click to collapse
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I think it's downgrading the Radio, while on Danger SPL that will brick your phone b.
I have also gone from Hard to Danger back to Hard again with no issues.
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
polarbearmc said:
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
Click to expand...
Click to collapse
If you are talking about the one click method that is know on the market as recovery flasher, that only takes care of granting root access and flashing cyanogen's recovery image. The radio and spl upgrades are on you.
Try here for more explanation
http://forum.xda-developers.com/showthread.php?t=550050
yea that's what i'm talking about... now don't get me wrong, i believe you guys here on xda first and foremost... but theres a video tutorial on android and me, and it doesn't show them installing the radio and spl between using the recovery flasher and then installing cyanogens 4.0.1... are they not doing it right in the video or are the radio and spl optional? all the guides on here seem to say you do have to flash them but the video clearly shows them not stopping to do it. so maybe their video just sucks haha. but any idea on that?
thanks so much
I have 1 click rooted and installed Cyanogen 4.01, I am on CRC1, my understanding was as I was already on 1.5 Cupcake, my current SPL and Radio were current.
I read somewhere that the 1 click method is only temporary root. But if someone could elaborate on this it would be very helpful. Also what is this hard spl ?
I rooted my phone so long ago just following JFs instructions I cant remember what spl I installed and now with the need for the Danger SPL or Eng SPL to run the new eclair roms I wanted to know what I am running I booted into the spl and it says HSPL10.95.3000 so I am pretty sure that I am using the Hard spl, is that correct ? Does this mean I can not use the new eclair roms with installing a new spl ?
If you booted into fastboot and it said HSPL10.95.3000, then yes, you are running the Hard SPL, and yes, you need to install the new SPL before flashing any Eclair ROMs.
Joe333x said:
I rooted my phone so long ago just following JFs instructions I cant remember what spl I installed and now with the need for the Danger SPL or Eng SPL to run the new eclair roms I wanted to know what I am running I booted into the spl and it says HSPL10.95.3000 so I am pretty sure that I am using the Hard spl, is that correct ? Does this mean I can not use the new eclair roms with installing a new spl ?
Click to expand...
Click to collapse
All you do is press
Camer+power then look next to Hboot.
tardie said:
If you booted into fastboot and it said HSPL10.95.3000, then yes, you are running the Hard SPL, and yes, you need to install the new SPL before flashing any Eclair ROMs.
Click to expand...
Click to collapse
thanks, man I just l wanted to double check. Do you think that eclair roms will always require a danger spl or eng spl? I just dont want to bother changin before the eclair roms are even stable enough to flash for regular every day use.
Joe333x said:
thanks, man I just l wanted to double check. Do you think that eclair roms will always require a danger spl or eng spl? I just dont want to bother changin before the eclair roms are even stable enough to flash for regular every day use.
Click to expand...
Click to collapse
1.They need Haykuro SPl
2.Didnt you hear the news?
Tmo will give the Mytouch/G1 up to 2.6 updates.This was said by tmo and some devs on twitter.
Ace42 said:
1.They need Haykuro SPl
2.Didnt you hear the news?
Tmo will give the Mytouch/G1 up to 2.6 updates.This was said by tmo and some devs on twitter.
Click to expand...
Click to collapse
according to one ROM thread I read the creator of the ROM said you must have Danger or Engineering SPL. I have heard of people bricking there phones using Haykuro SPL. Thats great news though, I had thought they were stopping G1 updates after 1.6