Related
I noticed a co-workers phone has "Reset" software installed on it and he installed a ROM from this site that had it included. I am trying to add it to my Tilt but cannot find it anywhere. The biggest problem is search for the word "Reset" finds so many off topic things. I have honestly been searching for about 2 hours now.
The software is simple, run it and it does a soft reset just like if I were to push in the button on the bottom of the phone with the stylus.
Does anyone know where I can find this?
try pshutxp
phsnake said:
try pshutxp
Click to expand...
Click to collapse
Worked great, thanks for the quick response.
Hi everybody
I did a hard reset to my phone this morning, everything worked fine, i took the phone with me to work, and there, I discovered that the touch screen would stop responding.
I tried soft reset few times, didn't helped.
Then I tried Hard reset which also didn't helped - I am now stuck on the Align Screen thing.
1- what can I do to solve it? I have tried blow trying my phone gently for a while in case some moisture got inside somehow. I also tried to clean the edges of the screen with a business card.
2- will att help me with this? I bought this phone on Ebay few months ago. the phone is less than a year old. all I got is the HTC imei and unlocking code.
Any help?
Hey i had the problem with one of the roms here... just reflash it with a newer ROM, that should fix it
drownage said:
Hey i had the problem with one of the roms here... just reflash it with a newer ROM, that should fix it
Click to expand...
Click to collapse
Just did it. tried two different roms.
neither fixed the problem
HELP!!!!
zackzack said:
Just did it. tried two different roms.
neither fixed the problem
HELP!!!!
Click to expand...
Click to collapse
I'm sure that somebody here have an advice for me
Not sure if this'll help you, but I had a similar problem, and what was causing it was the screen protector had slipped and was squeezed between the casing and the screen itself down one side - one I removed and replaced the screen protector, it worked fine.
doktorrob said:
Not sure if this'll help you, but I had a similar problem, and what was causing it was the screen protector had slipped and was squeezed between the casing and the screen itself down one side - one I removed and replaced the screen protector, it worked fine.
Click to expand...
Click to collapse
I have no screen protector.
what else coult it be?
I had a similar issue yesterday. I am using Dutty's v2 ROM. My problem started when I tried to enable TouchFlo. I could not get the TouchFlo to work and I did not have a lot of time to play with it. After 30 minutes, Goodlink locked the phone and when I went to unlock, the touch screen did not work. I did a soft reset and that did not help. I had to go back thru and disable TouchFlo and do a soft reset. This fixed it for me.
RajunCajun said:
I had a similar issue yesterday. I am using Dutty's v2 ROM. My problem started when I tried to enable TouchFlo. I could not get the TouchFlo to work and I did not have a lot of time to play with it. After 30 minutes, Goodlink locked the phone and when I went to unlock, the touch screen did not work. I did a soft reset and that did not help. I had to go back thru and disable TouchFlo and do a soft reset. This fixed it for me.
Click to expand...
Click to collapse
Thanks for the advice!
But I am stuck in the align screen. any idea how am i getting trough it?
1. disable TouchFlo
2. align screen
done. good luck
terencelaw said:
1. disable TouchFlo
2. align screen
done. good luck
Click to expand...
Click to collapse
How can I disable the touchflo if I have no access to the control panel. I am stuck in the align screen after a hard reset
put a file called welcome.not in the root of your sd card
XtreMe_G said:
put a file called welcome.not in the root of your sd card
Click to expand...
Click to collapse
I just put the file there and it skipped the align screen.
The setting for the touchflo are only enabling/disabling the sound when scrolling. how can I disable it?
zackzack said:
I just put the file there and it skipped the align screen.
The setting for the touchflo are only enabling/disabling the sound when scrolling. how can I disable it?
Click to expand...
Click to collapse
HELPppppp!
if you already did a hard reset, and its still not responding, it most likely is a hardware problem.
First...
MAKE SURE YOU HAVE FLASHED THE PHONE BACK TO THE ORIGINAL RADIO AND ORIGINAL ROM!!!
Second...
Call AT&T. Tell them you have a tilt cell phone and you need to warranty exchange it because the touch screen stopped working.
Third...
Tell ATT that you already hard reset, you already soft reset, and you have already factory reset the phone. Then tell them you have NO additional software on the phone, no installed programs, and have changed nothing.
They will ask you some questions, get your imei# and etc. etc.... then they'll make sure you still have a warrantly remaining. If THAT phone still has a warranty remaining, you should be able to get it exchanged.
Let us know what happens. It DEFINITELY sounds like a hardware issue.
I would go for the business card trick again, it surelly sounds like you have something between the casing and the screen. Perhaps you should try with an other "object" to clean between the screen and casing.
nybom said:
I would go for the business card trick again, it surelly sounds like you have something between the casing and the screen. Perhaps you should try with an other "object" to clean between the screen and casing.
Click to expand...
Click to collapse
Yup agreed, i have had this very same issue, I just ran my finger nail around the edge of the screen under the casing. Even a small build up of dust can cause this issue.
Good Luck
MM
MaxMotus said:
Yup agreed, i have had this very same issue, I just ran my finger nail around the edge of the screen under the casing. Even a small build up of dust can cause this issue.
Good Luck
MM
Click to expand...
Click to collapse
Thanks all for the help.
I tried fingernails, business card, everything. not working
Installed 2 different tweak apps (KaiserTweak , PocketTollMan) to disable the touchflo. Both can not be controlled at the relevant areas without the touch screen. God, it's getting complicated.
Should I open the case around the screen and make sure everything is clean?
zackzack said:
Thanks all for the help.
I tried fingernails, business card, everything. not working
Installed 2 different tweak apps (KaiserTweak , PocketTollMan) to disable the touchflo. Both can not be controlled at the relevant areas without the touch screen. God, it's getting complicated.
Should I open the case around the screen and make sure everything is clean?
Click to expand...
Click to collapse
anybody ?
nimda0 said:
First...
MAKE SURE YOU HAVE FLASHED THE PHONE BACK TO THE ORIGINAL RADIO AND ORIGINAL ROM!!!
Second...
Call AT&T. Tell them you have a tilt cell phone and you need to warranty exchange it because the touch screen stopped working.
Third...
Tell ATT that you already hard reset, you already soft reset, and you have already factory reset the phone. Then tell them you have NO additional software on the phone, no installed programs, and have changed nothing.
They will ask you some questions, get your imei# and etc. etc.... then they'll make sure you still have a warrantly remaining. If THAT phone still has a warranty remaining, you should be able to get it exchanged.
Let us know what happens. It DEFINITELY sounds like a hardware issue.
Click to expand...
Click to collapse
i agree with this one, i would just do this.... since you have pretty much done everything there is to do... plus if you exchange it... you wouldnt be left back on anything since you have already hard reset your phone so your would just be right back in the same place....
Help.. my Kaiser just died on me.. Just an hour ago it was working fine, then it went to sleep mode and it wouldn't wake up.. so the only way was to take the battery out.. I took the battery out and then it wouldn't load pass the Smart mobility screen. It just stays like that.. I tried taking the battery out for 30 minutes and it still doesn't work..
What happened to my kaiser and how can I fix it>?
What ROM are u using? and have u recently used clear temp?
If the answer to the above is Duttys and yes...
then Hard reset...no other way
There is an issue with Duttys hybrid and clear temp.
Did you purchase this from AT&T?
What has their tech support said?
Is it still under warranty? If so I would return it for warranty replacement.
This sounds like something failed in your hardware causing a software failure - if it is hardware you are going to want a new machine.
Bill
whk said:
Did you purchase this from AT&T?
What has their tech support said?
Is it still under warranty? If so I would return it for warranty replacement.
This sounds like something failed in your hardware causing a software failure - if it is hardware you are going to want a new machine.
Bill
Click to expand...
Click to collapse
I'm using TyTN II not the tilt..
With some old ROM.. I can't remember which one.. it was a long time..
bluemamba said:
What ROM are u using? and have u recently used clear temp?
If the answer to the above is Duttys and yes...
then Hard reset...no other way
There is an issue with Duttys hybrid and clear temp.
Click to expand...
Click to collapse
No I never used clear temp. This just happened out of the blue while I was at work.
Hold down Camer, Power & then push the reset tab & hold all three down until the tri-color screen pops up. See if you can get it into BL mode. Let me know.
GSLEON3 said:
Hold down Camer, Power & then push the reset tab & hold all three down until the tri-color screen pops up. See if you can get it into BL mode. Let me know.
Click to expand...
Click to collapse
Seems like the hard reset did the trick.. actually 2 hard resets.. the first one didn't work, it still froze there.. then a second one got it loading again...
GSLEON3 said:
Hold down Camer, Power & then push the reset tab & hold all three down until the tri-color screen pops up. See if you can get it into BL mode. Let me know.
Click to expand...
Click to collapse
Do you ever get to rest man?
Hi all,
My Vario 3 was in my pocket and the keylock wasn't on so buttons where being pressed at random.
Looking at the screen there is now a permanent white column to the left. It doesn't matter what program I display, it's always there, I've rebooted the device and the thing won't go away. (see attached photo)
Any ideas what may be causing this?
Thanks in advance.
Robert
rob3213 said:
Hi all,
My Vario 3 was in my pocket and the keylock wasn't on so buttons where being pressed at random.
Looking at the screen there is now a permanent white column to the left. It doesn't matter what program I display, it's always there, I've rebooted the device and the thing won't go away. (see attached photo)
Any ideas what may be causing this?
Thanks in advance.
Robert
Click to expand...
Click to collapse
Have you tried hard reset?
same thing happened to my Hermes, went away after a hard reset.
Thanks for the replies,
By hard reset I'm guessing you mean to remove the battery, wait a while, then put battery back and boot up?
I did that a few times and it's still there...
Any other ideas?
PS. I've attached another image showing the white column against the WM6 bootsplash screen
rob3213 said:
Thanks for the replies,
By hard reset I'm guessing you mean to remove the battery, wait a while, then put battery back and boot up?
I did that a few times and it's still there...
Any other ideas?
PS. I've attached another image showing the white column against the WM6 bootsplash screen
Click to expand...
Click to collapse
No, hard reset is something different. Check my signature to see what a soft reset and hard reset are and how to perform them.
Just performed a hard reset and it's STILL there!
hard reset means that you will lose all your data...
are you sure you did that?
if you did that and the screen is still like that, then maybe your screen has become faulty, which means you will have to change to a new screen if that white bar really bothers you that much.
I think it costs around £70 to £80 for a new screen.
If you have insurance with your service provider they might just give you a new phone.
Yep, Hard Reset wiped all my data clean off.
Yikes, so it could be a column of dead pixels!
try going into bootloader mode. if it is still there, then maybe your screen is to blame.
What about trying to realign the screen?
@Elisha
Yep. Still there on bootloader screen
@Mikulec
How do you realign the screen?
if it is hardware related, you will need to get a new screen. you can get it here: http://cnn.cn/shop/tytn-iitilt-screen-p-2032.html
or from fleabay: http://cgi.ebay.ca/Full-Original-LC...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
rob3213 said:
@Elisha
Yep. Still there on bootloader screen
@Mikulec
How do you realign the screen?
Click to expand...
Click to collapse
settings/system/screen/align screen
@Elisha
Thanks for the links
@Mikulec
Thanks, I assumed you meant you could somehow move the screens x-axis, I've tried calibrating the stylus but to no avail
Looks like it is hardware related then.
you could try a new ROM but if bootloader screen looks like that too, i doubt the new rom will help any.
Oh well, I'll make do for now and then maybe look into upgrading to a new handset in the not too distant future.
btw, What's the next in line to the Kaiser? Raphael?
rob3213 said:
Oh well, I'll make do for now and then maybe look into upgrading to a new handset in the not too distant future.
btw, What's the next in line to the Kaiser? Raphael?
Click to expand...
Click to collapse
Thats a good question, some say yes and some say no, the Raphael has less hardware buttons and not ahve tilted screen. So make your decision.
Maybe u can wait a little, nvidias chips look awsome, look at nvidia tegra.
Mikulec,
Wow! That looks great! No tilt, but hey with those specs I could plug it into a hdmi monitor and forget about the tiny screen altogether! I'm sold!
Thanks to all that have helped diagnose the problem with my Kaiser!
Robert
rob3213 said:
Oh well, I'll make do for now and then maybe look into upgrading to a new handset in the not too distant future.
btw, What's the next in line to the Kaiser? Raphael?
Click to expand...
Click to collapse
or....... you could wait a month or two and get the new Sonyn Ericsson Xperia X1.
http://www.sonyericsson.com/cws/products/mobilephones/overview/x1?cc=za&lc=en
Very nice indeed!
Thanks MACkjam
hi all.
i had recently bought a htc touch diamond mobile, the only program i had installed is google map
and yesterday while i was installing a game on my diamond the screen freez and so i restart the phone.but the calender did not works and the main screen too, so again i had restart the phone using the red button at the back.
what happened this time is that my phone got stuck when showing touch diamond screen and my diamond didn't do anything else.
hint: when installing the game it give me a warning that this software source is not reliable, do you want to proceed. i press yes
how can i enter my device? from where?
thanx in advanced
Other than another soft reset, I suggest you do a hard reset.
thank you for the advice, but who can i do hard reset?
fleeagain said:
thank you for the advice, but who can i do hard reset?
Click to expand...
Click to collapse
Look here:
http://wiki.xda-developers.com/index.php?pagename=Diamond_For_Beginners
thank you so much you made my day thank you man
fleeagain said:
thank you so much you made my day thank you man
Click to expand...
Click to collapse
You're Welcome!!