Database Develop

stuckked at recovery screen

hi
i installed 1.4CM + JF but i did not update via update.zip
then i wanted to flash a Hero rom,
Fatal1ty-Hero-Full-v1-4-zip (HTC Hero ROM for Magic by Fatal1ty)
but it gave error and stuckked at recovery screen always i start phone.
when i want to update:
"E:can't chown/mod /system/xvin (No such file or directory)
E:failure at line 9:
set_perm_recursive 0 2000 0755 0 6755 system:xvin
Installation aborted"
infos of phone:
"drea110 pvt 32B
Hboot_0.95.0000
cpld_4
radio_2.22.19.26I
Sep 2 2008"
i dont have a Backup
should i install HardSPL?... (HSPL10.95.3000) ?
what is solution?
is this phone rooted? how can i understand it?
thanks

did you even read the OP to almost every single hero rom? you have to have the 1.33.2005 spl to flash most any hero rom, there is one (could be more, haven't checked though) that will fit on the hard spl.
to get a rom back on your phone and the phone to a working state go into the recovery console from the recovery screen and type
Code:
ums_enable
to mount your sdcard to your computer and type
Code:
ums_disable
to unmount it after you put a rom on there that does not require the 1.33.2005 spl. such as cyanogen's or enomther's roms.

thanks a lot, it was not written at Fatal1ty's page, so i thought it's simple
i know tried
#ums_enable
/dev/block/mmcblk/ #
and connected to Pc, installed drivers ((http://dl.google.com/android/android_usb_windows.zip)
it still doesnt show the Mass Storage disk in My computer (windows)
there is a disk F: but when i click it it says put a disk in driver etc..
it seems i need a microsd card reader?... otherwise i dont see sdcard

ok i restarted it and now i can see as Mass Storage.. thanks
i have now HSPL10.95.3000 and RADIO-2.22.19
i think it mean i can flash any rom now

If you haven't rooted your phone, cause you said how do I know if it's rooted, you need to root it in order to flash a custom rom.

Ok I can't get the cynagogen recovery image to work please help?

So I download the image by right click save as and then the name it has. Then after I put in the SD Card to my G1 then I go to the terminal emulator. I type in su (wait for a screen to popup and press "allow")
flash_image recovery /sdcard/cm-recovery-1.3.1.img. It then says Flash_Image not found.... What do I do? And do I have to Partition my SD Card first?

ok now it says error reading...

What is it you're trying to do? Flash the recovery image? Or flash a ROM?

Do step 5 HERE
That is cm recovery 1.4

Have you tried the 6-minute version? It has worked for me on 2-different phones.
http://www.youtube.com/watch?v=o8BZYEBsSws

Un-Rooting a T-Mobile G1?

Hey folks, tried to root my G1 but it has went a bit wrong and i'd just rather go back to the stock firmware.
I have followed the steps on thread 491350 (I'll post the steps as I can't post links as a new user) but when I get to step 6 and push Alt + S I get this error message
'Installing from sdcard....
Finding update package....
Opening update package....
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
Press Home+Back to reboot'
Any help or suggestions would be much appriciated.
Thanks
-------------------------
Here are the instructions I have been following:
1. Get the original SPL for your phone, get it here
2. Rename it to update.zip and copy it to your sd card. /sdcard
3. Download the DREAIMG.nbh from here.
4. Place DREAIMG.nbh on the root of your SD card. /sdcard
5. Go into your phones recovery. [Hold the home & power button]
6. Push Alt+S on your G1 to flash it with update.zip
7. After it does its thing, gettig back to your home screen.
4. Start phone in bootloader. [Hold camera+power button]
5. Hit power to start the update DO NOT INTERRUPT!! i can not stress this enough.
6. Click on the action button(track ball) and your phone will reboot.
7. YOU NOW HAVE STOCK FIRMWARE, it will update on it's own in a little bit, or *Settings>About phone>System Updates*

hibs1875 said:
Hey folks, tried to root my G1 but it has went a bit wrong and i'd just rather go back to the stock firmware.
I have followed the steps on thread 491350 (I'll post the steps as I can't post links as a new user) but when I get to step 6 and push Alt + S I get this error message
'Installing from sdcard....
Finding update package....
Opening update package....
E: Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
Press Home+Back to reboot'
Any help or suggestions would be much appriciated.
Thanks
-------------------------
Here are the instructions I have been following:
1. Get the original SPL for your phone, get it here
2. Rename it to update.zip and copy it to your sd card. /sdcard
3. Download the DREAIMG.nbh from here.
4. Place DREAIMG.nbh on the root of your SD card. /sdcard
5. Go into your phones recovery. [Hold the home & power button]
6. Push Alt+S on your G1 to flash it with update.zip
7. After it does its thing, gettig back to your home screen.
4. Start phone in bootloader. [Hold camera+power button]
5. Hit power to start the update DO NOT INTERRUPT!! i can not stress this enough.
6. Click on the action button(track ball) and your phone will reboot.
7. YOU NOW HAVE STOCK FIRMWARE, it will update on it's own in a little bit, or *Settings>About phone>System Updates*
Click to expand...
Click to collapse
guessing your using windows, and have file extensions hidden
rename it to
update and not update.zip
or, you forgot to put the sdcard back into the phone

Firerat said:
guessing your using windows, and have file extensions hidden
rename it to
update and not update.zip
or, you forgot to put the sdcard back into the phone
Click to expand...
Click to collapse
Cheers, renamed it to just 'update and repeated the steps, have a new error message:
'installing from sdcard...
finding update package...
opening update package...
verifying update package...
E: No signature (5 files)
E: Verification failed
Installation aborted
Press Home+Boot to reboot'
Any other idea's m8?

hibs1875 said:
Cheers, renamed it to just 'update and repeated the steps, have a new error message:
'installing from sdcard...
finding update package...
opening update package...
verifying update package...
E: No signature (5 files)
E: Verification failed
Installation aborted
Press Home+Boot to reboot'
Any other idea's m8?
Click to expand...
Click to collapse
the file isn't signed
did you 'open' it in windows?
if so download it again, but don't open it
rename to update and try again

Firerat said:
the file isn't signed
did you 'open' it in windows?
if so download it again, but don't open it
rename to update and try again
Click to expand...
Click to collapse
(Thanks again for your prompt reply)
I did open it, yes. But i'm still getting the same error.
I formatted my SD card (Fat32), downloaded the file again, renamed it to update, placed the file on the root of my SD card and also placed 'DREAIMG.nbh' on the SD card (Should I only do one at a time)?
I then turned my phone off, switched it back on pressing the home key and power button and pressed Alt-S. I then got the same error as I posted above.

hibs1875 said:
(Thanks again for your prompt reply)
I did open it, yes. But i'm still getting the same error.
I formatted my SD card (Fat32), downloaded the file again, renamed it to update, placed the file on the root of my SD card and also placed 'DREAIMG.nbh' on the SD card (Should I only do one at a time)?
I then turned my phone off, switched it back on pressing the home key and power button and pressed Alt-S. I then got the same error as I posted above.
Click to expand...
Click to collapse
The NBH should be flashed by holding cam+power

Ace42 said:
The NBH should be flashed by holding cam+power
Click to expand...
Click to collapse
Yep.
I tried it again, with just the update (.zip) file on the sd card only, and i'm still getting the same error.
Any other suggestions guys?
Thanks alot

hibs1875 said:
Yep.
I tried it again, with just the update (.zip) file on the sd card only, and i'm still getting the same error.
Any other suggestions guys?
Thanks alot
Click to expand...
Click to collapse
you need to unzip the file and place the .nbh file onto your sd for it to be detected. Then you can install the file by cam+power, it doesn't use .zip files.

Ace42 said:
you need to unzip the file and place the .img file onto your sd for it to be detected. Then you can install the file by cam+power, it doesn't use .zip files.
Click to expand...
Click to collapse
What .img file?
From the instructions that where on this forum it says download the correct SPL, rename update.zip and place it onto the SD card. It then says download DREAIMG.nbh, download and copy onto SD card.
$10 paypal for the one that gets it working

hibs1875 said:
What .img file?
From the instructions that where on this forum it says download the correct SPL, rename update.zip and place it onto the SD card. It then says download DREAIMG.nbh, download and copy onto SD card.
$10 paypal for the one that gets it working
Click to expand...
Click to collapse
Yeah meant dreaimg not .img. But inside of the zip is a .nbh that has to be unzipped. The update.zip is the SPL renamed.
Read this carefully
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/

Ace42 said:
Yeah meant dreaimg not .img. But inside of the zip is a .nbh that has to be unzipped. The update.zip is the SPL renamed.
Read this carefully
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
Click to expand...
Click to collapse
I put the dreaimg.nbh on the root of the SD card, held the camera button, pushed the power on button, it went to the red/green/blue screen, then to the greyish screen where it said 'checking' then showed 'not allow - 28002'
I'll have a look at the website you provided.
Thanks

hibs1875 said:
I put the dreaimg.nbh on the root of the SD card, held the camera button, pushed the power on button, it went to the red/green/blue screen, then to the greyish screen where it said 'checking' then showed 'not allow - 28002'
I'll have a look at the website you provided.
Thanks
Click to expand...
Click to collapse
Yeah it should be grey and seen after rainbow screen.

Just a quick post to say I finally managed to do it (after hours and hours of trying).
Eventually, what I done was manually update the phone to cupcake, then from their on my device update the phone to Donut.
Not sure if the phone was unrooted, but then again I am not 100% sure it was actually rooted (Maybe I done something wrong).
Everything sorted now though. Cheers

How did you do it?
Hey hibs1875,
Could you post exactly what you did step by step? I am having the same issue you are and can't find any answers online. I downgraded to RC29 and now doing the SPL update I get the not verified error. Please let me know what you did. Thanks.

[Q] where do i find the update.zip file on my phone?

????
and where can i download it from because that seems to be the problem im having with my phone, the file appears to not exist according to the error messages im getting

your not making sense... have you downloaded an update.zip file ?? if so did u put it at the root of your internal sd card ??

azzledazzle said:
your not making sense... have you downloaded an update.zip file ?? if so did u put it at the root of your internal sd card ??
Click to expand...
Click to collapse
im a bit confused myself. i updated my phone to froyo via odin the other day and since then ive had force close loops and been unable to use any apps. when i boot into recovery mode and apply sdcard:update.zip as i was advised i get this message:
E:failed to open /mnt/internal_sd/update.zip (no such file or directory)
E:signature verification failed
Installation aborted
i assumed this was a file that was already supposed to be on my phone. i also assumed this was the reason im having the force closes as i am unable to format my sd card or delete anything from it.

Normal method is download to PC Connect phone in USB mass storage mode and transfer file to Phone sd card as update . Might need to rename the file if not update .
Power phone on via Recovery mode and navigate clockwork recovery to update.zip .
jje

JJEgan said:
Normal method is download to PC Connect phone in USB mass storage mode and transfer file to Phone sd card as update . Might need to rename the file if not update .
Power phone on via Recovery mode and navigate clockwork recovery to update.zip .
jje
Click to expand...
Click to collapse
where do i get the update.zip file from though?

followed this link http://forum.xda-developers.com/showthread.php?t=734166 to dl clockwork recovery and it wont open :S

please can anyone help???????

please can anyone help???????
nadineynuisance said:
please can anyone help???????
Click to expand...
Click to collapse
dud first download any ROM(like Darky i prefer or DOC) and keep the file in your internal sdcard say in /sdcard/download.
Then goto recovery mode and install from sdcard-> choosed zip from sdcard-> then card to the zip file location /sdcard/download, then select the file and instal.
you can move to folders using ur volume up and down key.
You can find ROM's in [URL="http://forum.xda-developers.com/forumdisplay.php?f=665"/URL]
Enjoy..

When your in recovery what does it say ??? does it say 'clockwork recovery' or summit like 'android recovery system <3e>

First step would be to read the FAQs as you are trying to start at the middle instead of the beginning .
What exactly are you trying to achieve .
jje

JJEgan said:
First step would be to read the FAQs as you are trying to start at the middle instead of the beginning .
What exactly are you trying to achieve .
jje
Click to expand...
Click to collapse
Likewyse!
Signature error is caused by trying to install an unsigner update.zip on recovery 3e. if you want help you should:
FIRST: read FAQS and Walktrough. When you read and understand them, you may proceed to doing what you want.
SECOND: Take time to WRITE every informations needed, like your GOALS and what has been done as of yet.
Asking for "update.zip" is like going to the garage and asking for an oil filter without telling the make, brand and year of your car. You might end up with an oil filter for a compressor instead of what you need.
THIRD: Don't do anything until you trully understand what you are doing. Or you might end up bricking your device (and blaming samsung for it?!)

cant get into OR(any OR)...

I flash a lot SBF file got and official, and vulnerable_recovery_only_RAMDLD90_78
but all the time it write:
E:failed to to verify whole file signature
please help me (I jest want to get back to my alfa CM9 )

Please give more information, such as:
Device Model (A853/A854/A855/XT)
Bootloader version (90.78, etc)
Operating system of your PC
Screenshot of error from RSDLite if SBF flashing is failing
Exact filename of SBF that's failing to flash
Can we also get this moved out of Development?

the other forums(not the dev) haven't a lot activity.
- A853
- 90.78
- win 7 64Bit
- no RSD err , for any SBF file

anybady???

hi,
i got the same problem and i did a research and found a way to fix it and it worked!
what you must do is:
1.flash the sbf file
2.remove the sdcard from the phone and insert it in to the PC
3.copy the update.zip and the openrecovery to the root of the sdcard
4.put the sdcard in the phone
5.hold (on the keyboard) x and the power button
6.select the update.zip and it should work
the problem is that when you flash the sbf it corrupt the update.zip (don't ask me why)
and i am not sure if it will work if you copied the update.zip and the open recovery via the usb
if i helped you please press the thanks button ^.^

As bad x boy already said, you need to flash the vulnerable recovery file ( vulnerable_recovery_only_RAMDLD90_78.sbf ) with RSD, then copy on the root of your SD card the recovery files ( update.zip and OpenRecovery folder - I chose Open Recovery 3.3). With the phone turned off, press the camera button while pressing the ON/OFF button. When you see the triangle, press the volume up key, then the camera button and from that menu, choose apply update from sd card or something like that. It should work just fine from now on. Good luck!