Hello,
While flashing the SP-JAS computer freezed on 15% of completion and now the device is stuck in BOOTLOADER MODE, I'm not able to flash it normally, I even tried the SD Method, and it hangs on Checking...
Here's the RUU log file.
20:06:19:875 [msg] : Version : [5.10 - 20060412].
20:06:22:937 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
20:06:27:156 [msg] : Disconnect ActiveSync .... [2]
20:06:27:156 [msg] : Start Get Connect Port.
20:06:27:343 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
20:08:47:984 [err] : BL Get Device Data Error.
20:08:47:984 [msg] : START UnInitialization !
20:08:48:500 [msg] : END UnInitialization !
Here are also some results from the MTTY
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: B, Bootloader Version : 2.05
Built at: Jul 12 2006 15:32:49
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x8
Main Board version=0x4
USB>checkimage
IPL CRC checksum = 0x9352B5E9
SPL CRC checksum = 0x42F889A1
CE CRC checksum = 0x3197DD93
ExtROM is None.
Radio Image CRC checksum = <-- There's no result here and it freezes.
Help appreciated...
Not sure if it will help but have you tried using the latest HTC ROM update ? I had a similar problem on my Dopod and eventually got it back with latest HTC ROM update.
Well actually the latest HTC ROM was installed I wanted to revert back to the Imate rom, while the flashing procedure the computer freezed on 15%...
I'm not able to flash the device anymore, it's stuck in the bootloader....
Breeze has frozen after ROM flash
Please help me!
I have done upgrade MTeoR with rom RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR.
After the upgrade my qtec went shutdown and after this froze and have clear white screen.
I did try left+right soft key+power and selected restore to default factory, but the situation is same, phone don't working
I did try jog wheel+camera+power and ran upgrade, USB on PC detect phone as HTC device, but the ActiveSync don't find device and RUU program don't work and waiting to connect.
The Same problem!
I have the same problem! My PC freezed on 3% and now the device stuck in BOOTLOADER MODE! I tried to update after this, update fails! INVALID VENDOR ID I want to try SD METHOD, but i don't know where to find ROM in .nbf format Please Help...
i also have the same problem.. stuck in bootloader... even though i try installing the original rom it says invalid vender id.....
does nobody know what to do?
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.
Starting ROMUpgradeUT.exe two times often brings this to a solution.
HTH, MrPhoni
MrPhoni said:
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.
Starting ROMUpgradeUT.exe two times often brings this to a solution.
HTH, MrPhoni
Click to expand...
Click to collapse
didnt work for me....
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.
eViL D: said:
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.
Click to expand...
Click to collapse
didnt work for me..
When I upgrade rom of CHT9110 by P3600i ROM. I got an error Invalid Vendor ID. And screen now is USB Bootloader. How I can restore to the original rom or is there any rom can upgrade for CHT9110 to support English language
up top......................
up up
up up ...............
I confronted same situation as you before. When i tried to flash my 3600i(HK traditional Chinese version) using "RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship.exe" found in forum, my 3600i finished with same error as yours "Invalid Vendor ID" and stayed on 3-color bootloader screen after rebooting. however, It restored to the original rom after I tried to flash my 3600i with upgrading software "D810_GPS_HK_TradChinese.exe" which got from download link appeared on software update in my Htc e-club. flashing "D810_GPS_HK_TradChinese.exe" failed with something like "wrong model" then my 3600i rebooted automatically and restored to the orginal state. I hope my case could do a little help to you.
also found the following from readme.doc in "RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship"
8. Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now?
A: If the update process has failed, you will see that your device will always boot in three-color mode. It’s normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer.
1. Disconnect your Mobile Device from the USB cradle/cable.
2. Reset your Mobile Device.
3. Reconnect your Mobile Device to the USB cradle/cable.
4. Check that the communication cradle/cable is connected properly.
5. Return to the ROM Update Utility.
Note: You should ignore the ActiveSync connection.
Hi,
I tried to flash a ROM on my trinity with my computer with WinXP
I got an error 262. Then I tried th recovery with soft reset etc. but it did not work.
Now I get error 286 when I want to upgrade HardSPL etc ...
What can I do? MY phone does not get out boot loader mode... :-(
Thanks,
Reza
Ok Now I am downgrading with the original ROM... but why did I get that error?
I have bricked my Hera100 when i flashed OS only
its has the following :
IPL 5.04.0001
SPL 5.04.0000
GSM 03.07.90
OS 1.8.0.0
IT HANGS AT STARTUP SHOWING ABOVE DETAILS ONLY . PLEASE ANY ONE HELP PLEASE. THANKS
wHEN I PUT IT IN BOOTLOADER MODE IT SHOW INVALID ID ERROR WHEN I FLASH , ANY CUSTOM ROM BSE I CANT USE HARDSPL SINCE IT STOPS AT BOOT SCREEN. HELP HELP
try flashing with the sd memory method maybe works
Hi everyone,
I have rooted my device and everything is working fine after update to 1.29.1540.16 and my phone start getting error " Unable to charge device". I trying to get it unroot because i believe its software issue.
I download this one "RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3" and try to factory reset my phone but it got RUU Error 152 everytime.. and now my phone stuck on htc logo with 4 triangles and i have to " fastboot oem boot " everytime ( .
Anyone please help me about this please.. I want my phone back to original software like before ..
sorry my for my bad english :