Hi,
I tried to flash a ROM on my trinity with my computer with WinXP
I got an error 262. Then I tried th recovery with soft reset etc. but it did not work.
Now I get error 286 when I want to upgrade HardSPL etc ...
What can I do? MY phone does not get out boot loader mode... :-(
Thanks,
Reza
Ok Now I am downgrading with the original ROM... but why did I get that error?
Related
Hi,
When I Flashing my ROM (CR86 THD v2.6) it stuck on 88%. What should I do?
Can Someone Help ME Please.
Thanks.
Please HELP HELP HELP!
Now when I tried to flash it again with the cr86 THD v2.5 it said
ERROR 264 : CONNECTION
ERROR [264, 274] : CONNECTION
ERROR [302~318] : UPDATE ERROR
ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code...
I see you have a K-Jam, try this.
Download your original ROM from “HERE” scroll down to K-JAM to find your ROM.
Put the phone in bootloader mode and try flashing the original ROM.
if you can still set your wizard in bootloader mode, try to flash button rom on your device.
Hi...
I got stuck in bootloader (Tri-Color)screen with KAIS130 SPL-3.29.HArd i`m not able to boot the OS ... I have installed the
Dutty_s_WM6.1_Official_UC_5.2.19199_RTM__nocube with Radio 1.65.16.25,
i did the HardSPL and still i cannot boot the os cause of the bootloader..
Also i`m trying to 'boot' via mtty.exe but it says command error, it responds
only "task 8" but it stops and cannot write nothing else (device reboots in
bootloder mode)... Is there a way to make my kaiser work ? Cannt unlock
cant change the SPL.
http://forum.xda-developers.com/showthread.php?t=354061
http://forum.xda-developers.com/showthread.php?t=334679
http://forum.xda-developers.com/showthread.php?t=354061
all from these links didn`t help me to boot the phone...
Please just inform me what is wrong in with the spl and how can i reflash again.
Best regards,
In Advance
Hi, my htc hd starts with 'smart mobility R1.14.25.24
D1.59.48753' and goes to windows version 6.1 initial screen (preparing for first use), then restarts again. I checked the boot loader screen and it comes with
blac100 32m
spl -1.54.0000
microp-blackstone led v6.
I did try to do USPL v2.5, i get the message 'usb port can not be opened'.Would someone please help to get my phone working? Really appriciate any help.
Hi,
Maybe try to flash with other rom, using SD card.
valanxda said:
Hi, my htc hd starts with 'smart mobility R1.14.25.24
D1.59.48753' and goes to windows version 6.1 initial screen (preparing for first use), then restarts again. I checked the boot loader screen and it comes with
blac100 32m
spl -1.54.0000
microp-blackstone led v6.
I did try to do USPL v2.5, i get the message 'usb port can not be opened'.Would someone please help to get my phone working? Really appriciate any help.
Click to expand...
Click to collapse
Put your phone into its bootloader and try to run USPL.exe. Did you remember to disable antivirus?
Fallen Spartan said:
Put your phone into its bootloader and try to run USPL.exe. Did you remember to disable antivirus?
Click to expand...
Click to collapse
Thanks. I did disable the antivirus. still not working.
Yesterday I tried orange ROM 'OrangeUK_HTCTouchHD_1.59.61.2_Radio_52.64.25.34_1.14.25.24_Ship_phone_software', hoping it would make the phone working. The update was successful, but the same problem.
valanxda said:
Thanks. I did disable the antivirus. still not working.
Yesterday I tried orange ROM 'OrangeUK_HTCTouchHD_1.59.61.2_Radio_52.64.25.34_1.14.25.24_Ship_phone_software', hoping it would make the phone working. The update was successful, but the same problem.
Click to expand...
Click to collapse
Try to install a newer version of the HSPL.
If you can't get USPL to work, have you tried HSPL? Your using a rom based on 1.56+ so you'll need to use HSPL 1.56
I just tried HSPL. I followed the thread http://forum.xda-developers.com/showthread.php?t=505377. Flashing for dummies. When I run the first step 'HSPLWrapper_Blackstone_156OliNex', it sits on 0% for long time and finaly came up with error msg. I tried the option 'recovery', but no use. I have done a hard reset. Still same position where it started. . I'm very sad now..
valanxda said:
I just tried HSPL. I followed the thread http://forum.xda-developers.com/showthread.php?t=505377. Flashing for dummies. When I run the first step 'HSPLWrapper_Blackstone_156OliNex', it sits on 0% for long time and finaly came up with error msg. I tried the option 'recovery', but no use. I have done a hard reset. Still same position where it started. . I'm very sad now..
Click to expand...
Click to collapse
What error message do you get? There should be an error code eg 260 or 262 etc. The different errors have different meanings and different solutions to fix them.
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
valanxda said:
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
Click to expand...
Click to collapse
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
valanxda said:
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
Click to expand...
Click to collapse
Error 262 is a very common error.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
Try to reboot and try to rerun a few times. If this doesn't work you will need to run the manual sspl.
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* If bootloader now shows 1.56.olinex you can then flash to your new rom.
Click to expand...
Click to collapse
When you say you tried the manual solution is this what you meant. You may need to reflash to your stock (original) rom first and then run manual sspl from there.
As this is now becoming a flashing problem, please post further responses in the Dummies Guide thread and I'll help you there. This thread will probably be closed soon.
As per post above, please post in dummies guide thread
Thread closed
Phone: HTC Touch Diamond 1
I tried hard reset, soft reset, any kind of reset but nothing. i tried to reflash but it doesn't work, stops at 0%, tried different SPL... any ideas?
eu.florin said:
Phone: HTC Touch Diamond 1
I tried hard reset, soft reset, any kind of reset but nothing. i tried to reflash but it doesn't work, stops at 0%, tried different SPL... any ideas?
Click to expand...
Click to collapse
remove the battery from the device and allow up to 10 minutes
replace the battery and ensure that the device go to bootloader
reflash with an official ROM for your device
Good Luck
thanks for your reply
i removed the battery for a night
the device goes to bootloader, red-green-blue-white has a text:
DIAM100 64M
SPL-1.93.3.000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT 0x32
when I try to flash with an official ROM I receive ERROR [294]: INVALID VENDOR ID
when I try to flash HARD SPL, RADIO or Costum ROM i receive ERROR [262] :UPDATE ERROR
another problem i think is that in flashing process guide I update from Image file NONE to another version like in the picture below
It's there any solution? or my phone needs another motherboard
eu.florin said:
thanks for your reply
i removed the battery for a night
the device goes to bootloader, red-green-blue-white has a text:
DIAM100 64M
SPL-1.93.3.000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT 0x32
when I try to flash with an official ROM I receive ERROR [294]: INVALID VENDOR ID
when I try to flash HARD SPL, RADIO or Costum ROM i receive ERROR [262] :UPDATE ERROR
another problem i think is that in flashing process guide I update from Image file NONE to another version like in the picture below
It's there any solution? or my phone needs another motherboard
Click to expand...
Click to collapse
What are you using vista or W7 on your computer ??
i tried on xp and win 7
-> ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
-> ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
already tried the solutions u gave me in the previous post
thank u for your patience but it seems nothing works
hey eu.florin , try to find the official ROMs on http://www.shipped-roms.com/index.php?category=windows mobile&model = Diamond
Good Luck
thank u Hakim Rahman , I finally found the ROM i need (RUU_Diamond_HTC_WWE_EastEurope_2.03.479.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship)
I have flushed "RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed" to downgrade my phone from 5.x and it failed after reaching 100% with this error:
ERROR [270]: UPDATE ERROR
After restarting I can see that it installed Win7 and SPL 1.57 successfully even though it gave me that error earlier.
After this, installation process of RSPL will end successfully on computer, but on mobile it doesn't restart after the process and completely freeze (If I disconnect it from USB it stills show USB instead of Serial, so it frozen) and If I restart it with buttery removal and boot it again, it is still SPL 1.57 and no sign of RSPL. In this step I cant install custom ROMS (Stuck at 0% and error 262) and HSPL (It said that I need to install RSPL first which I cant).
Any I idea? Do I need to install an other ROM before trying custom ROMS? Do I need to try Y cable method? Cuz I dont have a Y cable.
*Edit*: Installing of NoDo and PreNoDo roms also stuck at 0% and end with error 262 when phone is frozen again. Just like custom roms.
http://forum.xda-developers.com/wiki/HTC_HD7/Radios
Nothing? :| No one ever had similar problem?
bump
It was my bad trying to install radio roms instead of shipped roms.
Problem solved by installing "RUU_Schubert_HTC_Europe_1.60.401.01_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_RELEASE" from following links:
http://forum.xda-developers.com/showthread.php?t=864475
http://forum.xda-developers.com/wiki/HTC_HD7/Shipped_Roms