My HTC HD have
RUU_BlackStone_HTC_GER_1.56.407.2_Radio_52.60.25.33_1.12.25.16DE (german rom) installed and i would like to change to English ROM.
Can i just use a new English Firmware ROM and install it on my HTC HD. If yes where can i fnd the new English ROM ?
thank you
http://forum.xda-developers.com/showthread.php?t=505377
It depends what you want.
If you want to flash a custom ROM like Duttys v3.4 or a windows mobile 6.5 ROM, you need to start at the link posted by zuadao.
In this case I recommend that you read a lot about HSPL, USPL etc. and try to learn how it works.
If all you want is to get an english speaking standard ROM from HTC, you'll find them in the wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe.
You can pick any ROM that has the word "WWE" in its name (WWE means world wide english).
In this case, all you need is to download the ROM and run the exe.
brgds
Royan
No he can't flash directly any other rom, only Ger version, cause spl local control the zone of the rom corrispond to spl zone!
To perform a flash of a rom with another language you must use Hardspl or Uspl!
robertus3d said:
No he can't flash directly any other rom, only Ger version, cause spl local control the zone of the rom corrispond to spl zone!
To perform a flash of a rom with another language you must use Hardspl or Uspl!
Click to expand...
Click to collapse
I stand corrected!
I didn't think it through.
Sorry.
In the case of changing language using a stock ROM, I would use cRaCKwHoRe's USPL GUI v 2.5 Application to load USPL and the flash a stock ROM from the wiki.
There are instructions on how to run USPL GUI in the download and thread.
brgds
Royan
Thank you mate's. One more question: is there any risk if i use USPL GUI v 2.5 Application and then i flash a Stock ROM? If i install a english ROM and then i want go back to the original German one , can i still do this ?
Which one is better ? Hardspl or Uspl ?
Is the USPL GUI v 2.5 Application only for Stock ROM or for all ROM ?
Do i also need to uninstall "USPL GUI v 2.5 Application" after i installed the Stock ROM ?
thank you again for your help
No any risk, you can go back aslo using Uspl or Hspsl, but you must have the original rom and stock spl for you device!
You can use Uspl for every rom you want flash, read instruction in the uspl gui thread and uspl thread!
Why uninstall? It's on your pc, not on pda, you must use it every time you want flash a rom!
Good Flash and read very carefull the instruction!
robertus3d said:
No any risk, you can go back aslo using Uspl or Hspsl, but you must have the original rom and stock spl for you device!
You can use Uspl for every rom you want flash, read instruction in the uspl gui thread and uspl thread!
Why uninstall? It's on your pc, not on pda, you must use it every time you want flash a rom!
Good Flash and read very carefull the instruction!
Click to expand...
Click to collapse
grazie x la risposta
Related
Hello,
I want to cook a Jade Rom. This would be my first experience with cooking. So I have some questions to you.
1.) Before I flash my HTC Hermes i have unlocked it (CID-Unlock) and load a new Bootloader (2.10 Olipro). Have we this stuff also for the Jade?
2.) I search XDA and found, that I can't take my current Rom from Jade. Where I can now find a German Jade Rom?
3.) Can I test the cooked Rom on Windows before I flash it on Jade? (Windows Emulator need .bin files and I found only .nbh on the Jade kitchen)
Need Emulator
bomo said:
Hello,
I want to cook a Jade Rom. This would be my first experience with cooking. So I have some questions to you.
1.) Before I flash my HTC Hermes i have unlocked it (CID-Unlock) and load a new Bootloader (2.10 Olipro). Have we this stuff also for the Jade?
2.) I search XDA and found, that I can't take my current Rom from Jade. Where I can now find a German Jade Rom?
3.) Can I test the cooked Rom on Windows before I flash it on Jade? (Windows Emulator need .bin files and I found only .nbh on the Jade kitchen)
Click to expand...
Click to collapse
I have same question...
Does anyone know how to test the ROM without flashing it to the device?
bomo said:
Hello,
I want to cook a Jade Rom. This would be my first experience with cooking. So I have some questions to you.
1.) Before I flash my HTC Hermes i have unlocked it (CID-Unlock) and load a new Bootloader (2.10 Olipro). Have we this stuff also for the Jade?
2.) I search XDA and found, that I can't take my current Rom from Jade. Where I can now find a German Jade Rom?
3.) Can I test the cooked Rom on Windows before I flash it on Jade? (Windows Emulator need .bin files and I found only .nbh on the Jade kitchen)
Click to expand...
Click to collapse
prasadedla said:
I have same question...
Does anyone know how to test the ROM without flashing it to the device?
Click to expand...
Click to collapse
hi
i dont know about the emulator but if u want u can click on last line my sing i have given req links in the same
goodluck
Please Help in upgrading a new ROM step by step
Help needed badly
my ROM v is 1.14.404.3 (22273) WWE and i want to upgrade to miri 6.5_21198_v5.2 but have no idea how to start i have zero knowledge about this, thats why i started this threat so that people like me can get some help.
could someone please help me with what i need and how to do the rom upgrade help....
shazan said:
my ROM v is 1.14.404.3 (22273) WWE and i want to upgrade to miri 6.5_21198_v5.2 but have no idea how to start i have zero knowledge about this, thats why i started this threat so that people like me can get some help.
could someone please help me with what i need and how to do the rom upgrade help....
Click to expand...
Click to collapse
Post 1 and 3 who to flash Rom
http://forum.xda-developers.com/showthread.php?t=498326
and duttys 2.6 is the best Rom for HD
i prefer to Upgrade Rom using windows xp activesnic
You must flash HardSPL first to be able to flash this ROM!
* More info and instruction about HardSPL!
An alternative is USPL, it doesn't change your original SPL!
* More info and instruction about USPL!
thank you
is it wm 6.5 i want that one i like its interface
also i flash my fone before using HardSPL and it showed 100% but nothing happened? is there any video or images that can help me please
For all information on flashing, HardSPL, USPL as well as roms available why not check out the wiki? Thats what its for!!
There is also countless threads here regarding flashing, backing up, HardSPL etc etc etc
If you are looking for a particular type of rom, try searching this forum
http://www.youtube.com/watch?v=TZ1M8-P1Yiw
tutorial on how to flash to the miri rom
youtube video is good
but he forgot to shoe that we need to drag the .nbh file in to the wrapper to flash the rom otherwise i will create a problem
thank you
uspl
can someone upload a video of using uspl it seem many people are struggling with it.
i flash my phone to wm6.5 and i then flashed it back to 6.1 but my screen resolution is all wrong i mean the colour scheme pls need help urgently
have you do all the steps needed to have correct HSPL?wich rom are you using now and before?wich hspl have you now?
miri new 6.5 and now am back original shiped orange rom
tori007 said:
miri new 6.5 and now am back original shiped orange rom
Click to expand...
Click to collapse
for the original roms you MUST have stock spl i think.do you have it or your stil with hspl?i think hspl.
i used the onilex version 1.56 to flash before i install miri version 12
i downloaded the one from the wiki page
RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship
tori007 said:
i used the onilex version 1.56 to flash before i install miri version 12
i downloaded the one from the wiki page
RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship
Click to expand...
Click to collapse
What is your current SPL version if you check in your bootloader? HSPL 1.56.olinex?
You cannot use the new HSPL (1.56.olinex) with any rom lower than version 1.56. Therefore, flashing the 1.14 Orange rom that you did is giving you incompatibilities.
What rom do you desire to run in the end? You should read the guide in my signature. It explains and covers how to deal with this step-by-step.
my current SPL version 1.56
i would like to run the original shipped orange rom
tori007 said:
my current SPL version 1.56
i would like to run the original shipped orange rom
Click to expand...
Click to collapse
Is there only RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.2 5.26_1.09.25.14_Ship available? Or does Orange offer a 1.56.xxx.x version rom?
If you can only find the RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.2 5.26_1.09.25.14_Ship rom then you will need to downgrade your SPL to 1.14.0000 in order to run that rom.
ok thanks should v read ur guide more patiently
tori007 said:
ok thanks should v read ur guide more patiently
Click to expand...
Click to collapse
No problem and good luck. Let me know if you have any more questions!
hi too all people sory for my english i am from serbia
ust for general knowledge, is there a way back from HSPL?
i have read the rom article ([tried to copy website, but was not allowed...anyway its tut dummies guide <-- great article.)
just to be certain 100%, uspl and hspl has same effect, just that uspl i have to re-do it every time i want to flash cocked rom and HSPL is one time?
and how to now or see what rom is for htc hd eg.if i have hspl 1.56 whit this i can put any rom and can i put rom from hd2 on hd
thank you very much for the fast answer.
you are the best......
gagi75 said:
hi too all people sory for my english i am from serbia
ust for general knowledge, is there a way back from HSPL?
i have read the rom article ([tried to copy website, but was not allowed...anyway its tut dummies guide <-- great article.)
just to be certain 100%, uspl and hspl has same effect, just that uspl i have to re-do it every time i want to flash cocked rom and HSPL is one time?
and how to now or see what rom is for htc hd eg.if i have hspl 1.56 whit this i can put any rom and can i put rom from hd2 on hd
thank you very much for the fast answer.
you are the best......
Click to expand...
Click to collapse
Even with HSPL or USPL you can not flash a ROM which is made for a different device! It does not matter whether it is factory made or cooked. Even if you can flash it, that can damage your phone!
The ROMs on this thread are only for HD. They are "cooked", therefore those ROMs have a lot of components actually taken from HD2 and they look and behave exactly like HD2, but the cooks have composed and tweaked them to work on HD. Maybe slightly slower then on HD2, but they are flashable and they work good on a HD phone.
That is the purpose of cooking. It takes a lot of work to extract the important ROM components from HD2 or Topaz, make them work on HD and then compose a new ROM that looks and feels like HD2 and which still can be flashed on HD.
A ROM made for HD2, original or taken from HD2 subforum will not work on HD or any other phone.
You can chose original or cooked, but always take only ROM which is made (factory made or cooked) specially for your model.
Each HTC model has its own subforum here on xda and the ROMs on that subforum are cooked for it. There is also xda Wiki for each model.
You are right about HSPL and USPL.
SPL on your phone does not allow you to flash any ROM made for another region (even if it is factory original ) or cooked ROM.
With USPL you can fool it to let you do so, but SPL remains the same, original as it was, you need to fool it again each time you want to flash.
With HSPL, you replace SPL with a slightly tweaked version which will always allow you to flash whatever you want.
There is way back from HSPL to the original SPL if you wish so, the instructions are in the sticky topics.
ok for that
what hspl i need for yours rom ii i put on my hd is it 1.56 olinex and i can put any rom i wish on this
site for HD is that corectly
you have>
[Device: Touch HD
Rom: ★ Topix 3.0.2 WWE Sense with weather ★ WM 6.1 ★
Radio: 1.17.25.09
gagi75 said:
ok for that
you have
[Device: Touch HD
Rom: ★ Topix 3.0.2 WWE Sense with weather ★ WM 6.1 ★
Radio: 1.17.25.09
what hspl i need for yours rom ii i put on my hd is it 1.56 olinex and i can put any rom i wish on this
site for HD is that corectly
Click to expand...
Click to collapse
I have HTC HD with
SPL-1.56.OliNex
(when i press volume down key and press start button a three color screen appears and that is shown: SPL-1.56.OliNex )
I used HSPL.
I have installed this OliNex SPL long ago and flashed more than twenty ROMs until I settled for Topix 3.0.2 .
Just read "Dummys guide to flashing" carefully.
The ROM I use is old, there are newer ones on Topix 3.5.2 thread. You should read the changelog and users reports on that topic as well before you flash.
There are also many other good ROMs on this thread.
I think that the best idea is install new/cooked ROM from microSD card. You have to change name's ROM to BLACIMG.nbh, copy to Storage Card, switch off HD, press and keep Volume Down bottom and press for a while Power bottom. Rest you should do according to on LCD instructions. Internal downloader checkes is the ROM is correct.
Regards
i flash my htc elf whit mtty program i firs chhek is he cid lok he was anlock
then i flash phone..why some boody put video how to flash HTC in basic i think they are flashing same way only SPL and HSPL are deferent...
ok you post tutorial but what about people which english is bad like me ...
you succeed in flas phone I will try to post Mar bar video tutorial or if someone knows better, it would be nice to put a lot of people do not sin, because they are expensive toys
I studied at the HTC elfu ... next week go by HD and to try fles
I think that the process of flashing HTC same just the difference in names, ISPLand HSPL
it took me 1 day to figure out about flas HTC .... I do not know maybe like you all, but at least I have a desire to learn .... although do not know I want to thank everyone
Thank you for all of you there
gagi75 said:
hi too all people sory for my english i am from serbia
Click to expand...
Click to collapse
Hello Gagi75, it's nice to see another Serbian member on the xda's site.
Since it's not a great idea for you to open a new thread for the question that have been answered numerous times, feel free to PM me, and I'll help you with anything you need.
Pozdrav iz Beograda
hehehe hvala hvala eg thanks
I have HTC blac100 mal-functioning after updating the rom from spanish to english.the language change to english fine, but the screen begining to show different colours like ranbow.
Here are the files I used.
Unsigned_HardSPL_for_Blackstone_OliNex.zip
ROM is
RUU_BlackStone_hTC_Asia_WWE_1.59.707.0_Radio_52.62.25.34_1.13.25.24_Ship(4).exe
I dont realy konw what cuases this, could he be SPL or the ROM I used?
Maybe you installed the wrong version of HardSPL!
You need HSPLWrapper_Blackstone_156OliNex.zip
Terrorhuhn said:
Maybe you installed the wrong version of HardSPL!
You need HSPLWrapper_Blackstone_156OliNex.zip
Click to expand...
Click to collapse
Yes sounds like you need to update your Hardspl
Good HSPL NEEDED
Pls I want somone to upload here for me a very good HSPL that can solve my screen mal-function.
For HSPL, use either one of these threads
http://forum.xda-developers.com/showthread.php?t=505377
http://forum.xda-developers.com/showthread.php?t=431217
Thread closed