Related
Finally HTC released Arabic Support for HTC touch diamond. Arabic extended update available only for ROM version 1.93.456.2 so If you have older ROM you should update your ROM first.
You can find the Arabic Extended update and the new ROM at:
http://www.htc.com/mea-en/supportdownloadlist.aspx?p_id=133&cat=all
I already have this ROM version so I installed the Arabic update according to HTC instructions but after I did I got nothing at all even after soft resets. But I got it working after a hard reset.
Enjoy
only arabizer
its better than fi jaibi
not working in coocked rom
I have dutty 1.8 room installed, but I recive this message when I try to install:
Package GUID is not match with the one in your device!!
any workaround for this??
I have an O2 HTC Diamond so HTC don´t recognize my device Serial Number
Pls. can you send me the ARABIC Extended Update
and the isl Applications for HTC Touch Diamond with Arabic Extended Package.
THX
can somebody please from the guys who downloaded this extender upload on rapidshare, or send it to me on [email protected] and ill make an upload link on our server for it for everybody.
best regards
Kevin
Please, can anyone upload the files to rapidshare
Thank you
I download it and install it On my mobile .
Before it my mobile work properly.
But after that GPS not work . another problem is When i call anyone , If call is connected , So I can't hear anything from Mobile's speaker . But if I call and number is busy , So I hear beep
Please help me
I installed the latest rom 1.93.456.2 to my diamond but every time I try to install the extended arabic package I get a message on my laptop saying "confirmation..the files have been changed"
WHAT SHOULD I DO
"confirmation: The files have neeb changed!" error
The only way I could get over this error was by using another computer, the one that wasn't working was a vista and the one other was an XP. Everything went fine then. But yet I can't say for sure that the problem was with vista, maybe it was just something specific in my laptop.
New arabic software and ROM upgrade for diamond
can anyone uplolad those programs on rapid share? because I cannot download them from the official site. My S/N does not work bec I bought my diamond from US. Please this is important.
i also had this error ""confirmation..the files have been changed" using vista
can u plz post link to this flash coz i can't download it from htc and also the arabic aplication ?
thanks
Here is my experience with it.
After many other bad experiences I tried this arabizer and it works fine with me, you will need after installing it to make another hard reset to work fine (that's what I did, it may work with you without having to do this).
Hard reset at anytime will install the Arabic language pack automatically and you don't have to do it again, the arabizer actually installs "Fee Jeibi Ein" arabizer.
It is working in a perfect way but the only and most annoying problem is that some applications will show strange English fonts, I made a post about it and still waiting for replies to this problem.
See my problem in http://forum.xda-developers.com/showthread.php?t=435161
any link for the rom version and arabic aplication ?
error
When i try the official arabic support package on an upgraded ROM, it makes the following (automatically):
I run the upgrade fine wth active sync,
the HTC TP says i will have to restart (OK)
It makes the following pre-starting
validating...then
Verifying...
Then!!! An error occured and will give details after the device starts...and it starts...thank
it says summary of error problem is there is not enough space,
i run taskmanager and i made sure that i have enough enough space on both internal and external memories.
any ideas,
thanks
Arabic Extended Package
Ahmed.Zakaria said:
The only way I could get over this error was by using another computer, the one that wasn't working was a vista and the one other was an XP. Everything went fine then. But yet I can't say for sure that the problem was with vista, maybe it was just something specific in my laptop.
Click to expand...
Click to collapse
Dear Friend can u plz send me the Arabic Extended Package , as it really importend for me to run mobidiv prayer time which need arabic support plz any one hlep me ,as i tried from htc site but i cant get it anway
thankz u
whats the use the arabic keyboard is the tiny version and not the big one. its a pain to type on with fingers and i hate using the stylus
anyone knows?
Would someone be able to tell me whether if I install the above update, would i be able to see arabic content on HTC diamond? because right now if I browse the internet through Opera i am not capable of seeing arabic text...all I can see squares
Can someone clarify whether the above update fixe the problem?
or is there any other solution where i am able to see arabic text while browsing the net?
you reply is highly appreciated
yes
when you goto download the latest ROM update from HTC there will be a drop box asking which you want to get (arabic or english)
the arabic is exactly the same but has the following:
it displays the date/time in arabic (western format)
it has arabic fonts
+ the arabic (tiny) keyboard.
other than that everything else is english... its not full localization.
cylent said:
yes
when you goto download the latest ROM update from HTC there will be a drop box asking which you want to get (arabic or english)
the arabic is exactly the same but has the following:
it displays the date/time in arabic (western format)
it has arabic fonts
+ the arabic (tiny) keyboard.
other than that everything else is english... its not full localization.
Click to expand...
Click to collapse
Many thanks mate...really appreciate it
I've just gotten my Touch Diamond a day ago and now I'm running Dutty's v2,3a rom, however I've noticed that it doesn't come with Cantonese support. Mp3's etc show *[email protected]()[email protected] instead of the Chinese CHARACTERS.
So can anybody tell me how install Chinese support?
Have a look here
Have Thai support on my Diamond & it works great.
Uhm, thanks but any free solutions?
Anybody else?
I'm not sure this solution has Cantonese support but you can give it a try. If it does not, don't blame me, I don't know Chinese
Also, this is not a solution to have the input things (no IME). You will only be able to read characters.
*Download Asukal's e-china for Diamond.
*Install the .cab. Soft reset.
*Download reloadnls.exe.
*Extract the .exe from the .zip and copy it to your Startup directory (usually Windows/Startup/)
*Soft reset.
*Check if your hard keys are still working. If not, add this registry value (it should already be added with the .cab) then soft reset
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010411
"Keyboard Layout" = "00000409"
*Installing new languages support could make your keyboards messed up with the T9 input and stuck with numeric or symbol (full, compact and phone keyboards are concerned). If so, change those registry values :
Code:
HKCU\keyboard layout\Preload
"Default" = "e0010411" >> "Default" = "e0010409"
Code:
HKCU\keyboard layout\Preload\1
"Default" = "e0010411" >> "Default" = "e0010409"
I'm not sure if the last trick will work and fix your keyboards but it works for me.
Try this post in another thread on this fourm, its for the diamond:
http://forum.xda-developers.com/showpost.php?p=2590632&postcount=6
just follow it step by step and you will have chinese (cantonese) support
@Chenman: I just did that and after a softreset, it hangs @ the Windows Mobile 6.1 screen....hard reset?
Hey Sasimi, did you try the one I sent you via pm ?
Working fine on my diamond, Easy install with no hangups as of yet !
Sasimi said:
@Chenman: I just did that and after a softreset, it hangs @ the Windows Mobile 6.1 screen....hard reset?
Click to expand...
Click to collapse
Did you follow it step-by-step?
It didnt hang for me, but yeah, sounds like you might need to do a hard reset.
chenman said:
Did you follow it step-by-step?
It didnt hang for me, but yeah, sounds like you might need to do a hard reset.
Click to expand...
Click to collapse
Yeah, did it step by step, anyway, I just installed CE-star, which gave me chinese support too, so thanks anyway.
Sasimi said:
I've just gotten my Touch Diamond a day ago and now I'm running Dutty's v2,3a rom, however I've noticed that it doesn't come with Cantonese support. Mp3's etc show *[email protected]()[email protected] instead of the Chinese CHARACTERS.
So can anybody tell me how install Chinese support?
Click to expand...
Click to collapse
Why don't you simply install the Official Chinese ROM for Hong Kong?
This will surely be the best support for Cantonese!
http://forum.xda-developers.com/showthread.php?p=2441695#post2441695
i try to use the differet rom on my pro 2, beacuse the offical rom is so slow
i hear some method can display chinese and input on the english rom, how can i do or found the information??
help me please~
i have used cd star to input and view chinese (apparently once you install the software, it installs the font so you can read chinese). I used it on WinMo 6.1 and have not yet install in my tilt 2 yet (but will do it soon) so I presume it will work without any issue.
http://www.mobem.com/products/CE-Star.php
当然,看我写的
check this out. i wrote that
http://www.missroc.com/20090715/final-chinese-on-tp2.html
PUTALE said:
i have used cd star to input and view chinese (apparently once you install the software, it installs the font so you can read chinese). I used it on WinMo 6.1 and have not yet install in my tilt 2 yet (but will do it soon) so I presume it will work without any issue.
http://www.mobem.com/products/CE-Star.php
Click to expand...
Click to collapse
i try the suit but many Traditional Chinese can't be display normail
zdp011 said:
当然,看我写的
check this out. i wrote that
http://www.missroc.com/20090715/final-chinese-on-tp2.html
Click to expand...
Click to collapse
i need the Traditional Chinese anyway thanks for your help
use the font from Hong Kong official ROM.
It supports CHT almost perfectly. but remember you have to change your regional settings to Chinese(Taiwan) or Chinese(Hong Kong).
E-Mail me if you want a cab.
For the Chinese input, tell us which IME you use.
anyway
its same
安装那个我提到的雅黑字体
那个支持繁体显示
只要能支持繁体输出显示之后
繁体输入的话,随便安装你喜欢的繁体输入法即可.
in this , http://ricky119.com/chinesesupport/ ,you can find many useful resources , Chinese(Asia Language) support for Non-Chinese ROM
of course it support both CHT and CHS
final jzhyok give me a method to slove problem , it is good method!!!!!
thanks so much all of you!!!!!!^^
This is what I always use....very small and works really well (it adds support for Japanese and Korean characters as well)
http://www.studiokuma.com/wm/?section=support
I dont really need the input method so I just use the Droid.cab only. You can try them out
thank you
I got my Tilt 2 today. i am still learning how to install the softwares on my cell phone. thank you guys for your advices on this forum.
Is is possible to extract the Chinese Font and input method from the Official HKCSL_WWE ROM? (CSL is a phone company in Hong Kong)
I am using the Offcial HKCSL_WWE ROM on my Pure now but I would like to use some nicely customize ROM find here.
The only only problem is I need Chinese. I wish I can put the Chinese font and input method to some cooked ROM.
Thank you for any reply,
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
yup...probably like what you said..
OCedHrt said:
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
Click to expand...
Click to collapse
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
OCedHrt said:
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
Click to expand...
Click to collapse
So, how do I extract the input method? Do I do that in nbh or the on the phone?
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
Where can I found Ricky's chinese font? Is it a add-on or need to be cooked in?
Thanks every one
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
agree!
can you help me out? Looks like Ricky's MSYaHei v6.0 cannot be installed on the new Manila 2.5.2011.30300 (Leo 2.54) anymore...any updates, please? I've lost Ricky's website address. thanks.
BumAround said:
agree!
can you help me out? Looks like Ricky's MSYaHei v6.0 cannot be installed on the new Manila 2.5.2011.30300 (Leo 2.54) anymore...any updates, please? I've lost Ricky's website address. thanks.
Click to expand...
Click to collapse
These are the cabs I use to get Chinese display on my Topaz. Seems to work fine with the new manila. First, I install the font cab, then without rebooting, install the NLS cab. Then reboot. Sometimes it takes 2 reboots to get working, but so far so good. These cabs only provide support for viewing Chinese, not typing it. You'll need to find something else for that. There are several input methods floating around on xda if u look.
Good Luck
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now [install this if you want your manila to display in chinese, proceed to #2 if installed, if not installed, no need to do step 2]
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and uploaded the files i used
http://www.sendspace.com/file/08vu3l
mindofmike said:
These are the cabs I use to get Chinese display on my Topaz. Seems to work fine with the new manila. First, I install the font cab, then without rebooting, install the NLS cab. Then reboot. Sometimes it takes 2 reboots to get working, but so far so good. These cabs only provide support for viewing Chinese, not typing it. You'll need to find something else for that. There are several input methods floating around on xda if u look.
Good Luck
Click to expand...
Click to collapse
yunchikan said:
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and upload the files i used
http://www.mediafire.com/?n2mjzmmzzdz
Click to expand...
Click to collapse
Thank you both. I wonder if the file(s) provided will work on the latest/newest Sense 2.5 (Manila 2.5.2011.30300) with Leo 2.54? Because the Ricky's MSYahei6 no longer work. In the meantime I do not need chinese input, only need the chinese display/support.
Anybody knows Ricky's website, please?
BumAround said:
Anybody knows Ricky's website, please?
Click to expand...
Click to collapse
http://ricky119.com/chinesefont/?replytocom=983
BumAround said:
Thank you both. I wonder if the file(s) provided will work on the latest/newest Sense 2.5 (Manila 2.5.2011.30300) with Leo 2.54? Because the Ricky's MSYahei6 no longer work. In the meantime I do not need chinese input, only need the chinese display/support.
Click to expand...
Click to collapse
hmm..
im using that same latest Manila [energy rom feb 1st release]
and the cab i provided in the post works for me..
dont know if it will work with Leo 2.54 tho. you can try. it works on my Topaz :]
Chinese input
QQpinyin(QQ手机输入法)
website:http://mobile.qq.com/py/
sougou(搜狗输入法)
http://shouji.sogou.com/
Baidu(百度手机输入法)
http://ishouji.baidu.com/input/
i use QQpinyin, i like the skin of it
Thanks everyone for providing the Chinese support download.
Get back to the original question, can I extract the Chinese font and input method from the ROM?
Thanks,
RayYung said:
Thanks everyone for providing the Chinese support download.
Get back to the original question, can I extract the Chinese font and input method from the ROM?
Thanks,
Click to expand...
Click to collapse
What everyone is saying is that even if you successfully extract the files, you couldn't install them into a cooked ROM. You would need to create your own ROM and add the chinese input when you cook it. I have tried some cabs in XDA that claim to let you use the htc chinese input and fonts, but they never worked for me. In fact they totally screwed up my phone and I had to hard reset.
That being said, you could (potentially) dump the rom you are using, then import it into a kitchen and cook your own custom ROM. There are lots of cooking tutorials on this site if you look around, but be prepared to invest considerable time and energy into the learning process. And to be honest, I think the other viewing and input methods listed in this thread are superior.
Just my 2 cents.
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
The display problem is very easy to fix. There are many fonts out there that work on Manila. If that's what is being looked for, I think some solutions have already been posted in this thread.
However, if you're trying to get the original HK CSL HTC CHT IME installed, then I am not aware of any solutions yet.
mindofmike said:
What everyone is saying is that even if you successfully extract the files, you couldn't install them into a cooked ROM. You would need to create your own ROM and add the chinese input when you cook it. I have tried some cabs in XDA that claim to let you use the htc chinese input and fonts, but they never worked for me. In fact they totally screwed up my phone and I had to hard reset.
That being said, you could (potentially) dump the rom you are using, then import it into a kitchen and cook your own custom ROM. There are lots of cooking tutorials on this site if you look around, but be prepared to invest considerable time and energy into the learning process. And to be honest, I think the other viewing and input methods listed in this thread are superior.
Just my 2 cents.
Click to expand...
Click to collapse
Actually, that is a good idea ^^. I'm going to try dumping and adding. I do have the extracted inputs.
yunchikan said:
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now [install this if you want your manila to display in chinese, proceed to #2 if installed, if not installed, no need to do step 2]
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and upload the files i used
http://www.mediafire.com/?n2mjzmmzzdz
Click to expand...
Click to collapse
hi can you try to reupload the files as i couldnt download
I have successfully installed this Chinese IME (official ezinput) on the NhatHoa ROM using 23529 and manila 2011 3030. I did first install Chinese fonts and a NLS cab... (u can look for my post earlier in the thread.)
Seems to be working fine so far. Better backup before you try it though. I have heard it cant be uninstalled very easily.
mindofmike said:
I have sucessfully installed this Chinese IME (official ezinput) on the NhatHoa ROM using 23529 and manila 2011 3030. I did first install Chinese fonts and a NLS cab... (u can look for my post earlier in the thread.)
Seems to be working fine so far. Better backup before you try it though. I have heard it cant be uninstalled very easily.
Click to expand...
Click to collapse
thanks for the heads up. now, after the install into a WWE ROM, will one still be able to input Chinese or English by switching the keyboard/input method or something?
damn good!!!
i love the official chinese keyboard interface and this is what i've been looking for since i started to flash english cooked rom!!!
BumAround said:
thanks for the heads up. now, after the install into a WWE ROM, will one still be able to input Chinese or English by switching the keyboard/input method or something?
Click to expand...
Click to collapse
Actually can use both English and Chinese directly with a keyboard button and also by changing sip... working great so far. Also both English and Chinese dictionaries seem to be working ok.
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
1st pack (Dialer and deps) http://www.multiupload.com/YQGEDIMWJD
HTCScroll_2_0_19221326_00
Video_Telephony_2_5_35575_0
Shared_Modules_1_01_19221333_00
HTCFramework_1_5_19223320_00
Volume_Control_2_2_20113221_00
Contact_Picker_1_0_20113132_00
HTCFont_Link_1_0_19132133_1
Contact_Utility_Engine_1_2_20113727_00
Concurrence_Mgr_1_5_19221227_00
Resource_Proxy_1_0_19221124_00
SharedResource_1_0_20111720_00
Phone_Canvas_Enhancement_4_2_51720111829_0
New_Contact_Card_1_1_20113729_0
2'nd pack http://www.multiupload.com/1D9Z6NCUJK
Manila_2_1_19193517_0
3'rd pack http://www.multiupload.com/R1BXPVJFQV
Album_3_2_20113921_0
CommManager_2_9_U_0 with 12 functios
INSTALATION INSTRUCTIONS
1.Copy files to windows folder
2.import registry with your preferate reg editor
3.REBOOT AFTER INSTALL
you can also delete panel manager and stop slideview to get sime speed
go...go...go...jer.
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
I've got a X2 fromm vodafone and is unsoportable. We're waiting for your work.
jerpelea said:
Since there is no SSPL or HARDSPL for X2 we dont have any option on making custom roms
i have started porting latest manila 2_5_2012 to x2
works fluent
i plan to make cabs for all htc apps that come with latest htc devices
if you like my work you can buy me an beer
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=4300696
Click to expand...
Click to collapse
The best news recently!
I have "tasted" the 6.5.2 update of X2 in some phase, I really liked it. I'm sure the 6.5.3 update combined with manila will make X2 to become the most comfortable gadget for my personal needs.
Many thanks for your efforts jerpela!
Great news, highly appreciated!
phone dialer ported
i will upload it tomorow
uploaded manila with split languages
copy only manila and your language to windows folder
inport registry with your favourite reg editor
landscape is enabled
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Giland said:
looking good, any chance you can upload the lang files for the Dialer ?
Im using a nb-NO lang ( Norwegian Bokmål ) , so that the dialer will display stuff. Or is there a way to force it to use the English one ?
Click to expand...
Click to collapse
for any other file than english you need to rename all 409 files to your country code
this will display english mesages !!!
if you want native language you have to translate yourself
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
bazsikar said:
I don't know if my problem has anything to do with FW revision (R1AD006).
First of all somehow registry import didn't work for me, only some registries were imported out of all I can see in the reg files. Then I made cabs of them and installed and all of them seemed to appear.
After this I was very happy when sence appeared on my X2! But then the problem came: in every 1-2 seconds the empty today screen blinked in.
I did a soft reset, then a hard reset and installed it right after again. But didn't solve the problem. And noticed that after maybe one minute the blinking turned into pulsating, empty today appeared more frequently but for lot shorter times.
I don't know what can cause this, any idea?
As much I was able to test it it seems to be quite fast!
Click to expand...
Click to collapse
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
jerpelea said:
1.import patch.reg
2.reboot phone
if is not working try
1.backup HKLM\Init
2.delete lines with xkey,panelmanager,SlideView
i am using it on 006 for 2 days without any glitch
yes is fast
Click to expand...
Click to collapse
2nd option worked, thanks! Now testing.
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
ndjorovic said:
How meny of you have installed this on your X2.
Im trying and trying, but it looks like im mising something.
I have copied ewerything under the windows folder
and i can find only one reg entery calld manila.
What to do?
I realy wana make this work.
Help!!!
By the way grate post.
Just go ON
Sory but my English
Click to expand...
Click to collapse
Try to install these.
The bkinking still occurs after pushing slide view key once or twice.
I have other issues also but before sharing them maybe I should try patch.reg but it doesn't work.
Error message comes "line 302 - unsupported DirID 1" (HKCR) and line 234 in HKLM.
Besides it's very good feeling to have manila on X2. Now I won't feel to change back to X1 every now and then.
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
marcuchinonis said:
Hello, is possible to make/upload a cab for installing manila?
I am not sure with registry skills and copy and paste files to Windows folder is impossible with no free space message. Thanks
Click to expand...
Click to collapse
First I had to uninstall some apps when i tried it before hard reset. I don't know if you use SE User Guide (it's 4-5MB) or pixel city panels.
I am not an expert at all either, only trying to discover registry things, just managed to make the attached 2 cabs of jerpelea's all.reg and manila.reg and manila works after installing them.
I encountered some problems in the People tab.
When I click the All People button Manila restarts, the same thing happened when I click Updates & Events in a contact...
Is there any way to solve this?
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
ndjorovic said:
Same here. i have problems with people tab, media tab, music tab.
Manila resets every time i try to change something + i cant import pictures or music files.
how to fix this unstable state of otherwise great MANILA!!!
Thanks!!!
Click to expand...
Click to collapse
you need to copy all packages and install regs
not just 2