Kaiser bootloader problem - Tilt, TyTN II, MDA Vario III General

Hi guys, before all, this is my first post, but i have solve many problems reading this forum, so thanks to all.
But this time, I havent find a solution to my problem, i have a 8925 at&t tilt, with sim unlocked by KaiserUnlocker, and it had worked fine for 5 months, but today i get into the bootloader just to see the information of spl, and it got stuck in the bootloader, i tried a soft reset and just restart un bootloader again, remove the battey and when i turn it on, it appear bootloader again, my pc doesnt get a connecting with my tilt, so i cant flash it...suggetions?
bootloader information
KAIS1*0
SPL-3.29. HARD
CPLD-8
THANXS

em.prismaing said:
Hi guys, before all, this is my first post, but i have solve many problems reading this forum, so thanks to all.
But this time, I havent find a solution to my problem, i have a 8925 at&t tilt, with sim unlocked by KaiserUnlocker, and it had worked fine for 5 months, but today i get into the bootloader just to see the information of spl, and it got stuck in the bootloader, i tried a soft reset and just restart un bootloader again, remove the battey and when i turn it on, it appear bootloader again, my pc doesnt get a connecting with my tilt, so i cant flash it...suggetions?
bootloader information
KAIS1*0
SPL-3.29. HARD
CPLD-8
THANXS
Click to expand...
Click to collapse
Look into this http://forum.xda-developers.com/showthread.php?t=371154

LuXx said:
Look into this http://forum.xda-developers.com/showthread.php?t=371154
Click to expand...
Click to collapse
This one is better: http://forum.xda-developers.com/showthread.php?t=433835 (and not just cos it's mine)
Dave

Im gonna try, i will post results. thanx

em.prismaing said:
Im gonna try, i will post results. thanx
Click to expand...
Click to collapse
Remember, you can always reflash a stock rom from the SD card now that you have 3.29hard. You don't need activesync.

Ok.. I will try

I got a serious problem here, I flash radio via sd card (I use1.65.21.18) and then I flash rom with TPV6 FUll via sd(i guess they are compatible), both flashes were succed. The problem is that when i turn on the phone, just bootloader screes appear . I cant see windows mobile, nothing :S...suggestions..help!

em.prismaing said:
I got a serious problem here, I flash radio via sd card (I use1.65.21.18) and then I flash rom with TPV6 FUll via sd(i guess they are compatible), both flashes were succed. The problem is that when i turn on the phone, just bootloader screes appear . I cant see windows mobile, nothing :S...suggestions..help!
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=420683
Ta
Dave

SOLVE!
Problem solve, thanx to all!

Related

Revive this bricked (?) Wizard!

I'm trying to fix my friend's MDA right now. The problem is, it's stuck on T-Mo splash screen. It can however go to tri-color screen. Can I save this MDA or should I bury it?
Any help would be appreciated
Hi!
At the tri-color screen you should be able to flash it with a new ROM. Just try it, that worked for me after a failed flash.
Cheers
djvw
rockmanneo said:
I'm trying to fix my friend's MDA right now. The problem is, it's stuck on T-Mo splash screen. It can however go to tri-color screen. Can I save this MDA or should I bury it?
Any help would be appreciated
Click to expand...
Click to collapse
I just had the same problem myself, talk about ****ting my pants.
I have a Dutch rom in my Vario and I cid unlocked it and tried installing
a US rom but the phone was dead after it.
In the tri-color screen I tried to load the new 2.26 US rom and then the latest UK rom but both failed with invalid Vendor id or something like that.
So I downloaded the NL rom from here and thnk god it loaded without a problem and the Vario is working again.
Sadly in Dutch but at least it works again, can anyone from Holland help me upgrade to the latest US rom ?.
Dave...
Dave...
Encountered some problem..
It would not connect to ActiveSync from tri-color screen. There is a 'USB' at the bottom screen when I plug in the USB cable, but I don't think the PC recognizes the device.
And the thing is my friend has never CID unlock the thing
He said he just took it overseas and never turned it off, when he got back here the phone went like this.
More help please
rockmanneo said:
Encountered some problem..
It would not connect to ActiveSync from tri-color screen. There is a 'USB' at the bottom screen when I plug in the USB cable, but I don't think the PC recognizes the device.
And the thing is my friend has never CID unlock the thing
He said he just took it overseas and never turned it off, when he got back here the phone went like this.
More help please
Click to expand...
Click to collapse
PC doesn't need to recgonize the device via activesync to flash the Rom.
Try and find your original rom.
Put the phone in the bootloader (canaryscreen aka tri-colored screen).
plug-in your usb plug.
And start the rom update utility.
Regardless of your activesync status it should start updating your mda.
This takes about 10 minutes, and will pause at some stage, don't be alarmed and don't pull the plug !!!
Good luck
the-equinoxe said:
Try and find your original rom.
Put the phone in the bootloader (canaryscreen aka tri-colored screen).
plug-in your usb plug.
And start the rom update utility.
Click to expand...
Click to collapse
Can I update using the latest ROM (2.26)? Why does it have to be original rom?
Regardless of your activesync status it should start updating your mda.
Click to expand...
Click to collapse
Even tho PC cannot detect the phone at all, rom update util still can go thru?
I will try again tonight, last night I tried, 2.26 rom update utility cannot detect the mda
Good luck
Click to expand...
Click to collapse
Thanks :wink:
rockmanneo said:
Can I update using the latest ROM (2.26)? Why does it have to be original rom?
Click to expand...
Click to collapse
It's recomended to go back to the original rom, so you can go back to the point before the problems began..
Even tho PC cannot detect the phone at all, rom update util still can go thru?
I will try again tonight, last night I tried, 2.26 rom update utility cannot detect the mda
Click to expand...
Click to collapse
In canary-screen mode the phone will have an active usb connection, ActiveSync won't detect it however, because the ActiveSync software on the phone is only started when windows-mobile is running (which doesn't occur in boot-loader).
The Rom Upgrade Utility, should be able to detect the phone.
But always make shure the battery has been charged (at least half-charged).
Several people on this forum have revived their semi-bricked phone this way.
Thanks :wink:
Click to expand...
Click to collapse
You're welcome

Slowww wizard unable to sync

Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
i'm glad i solved the problem.. just entered manually in bootloader then flashed a original qtek rom and it fine now
thanks anyway, hope this help other people in this very situation
bye
cheers from portugal
W4R_M4ST3R said:
Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
Click to expand...
Click to collapse
You can't go from 1 to 3. Re-flashing a stock ROM was a good move.
--M
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
zorrozorro said:
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
Click to expand...
Click to collapse
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
_Nomad_ said:
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
Click to expand...
Click to collapse
How can i upgrade my ROM if i could not connect my phone to the computer! The main problem is that i could not syncronise my phone and my PC.
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
_Nomad_ said:
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
Click to expand...
Click to collapse
Thank you!!
Could you explane me a bit more precise what does it mean bootloader and reflash? Does it mean that i can syncronise phone and computer when i have RGB on my screen?
When you've got your device in bootloader mode just plug it in and start the upgrading procedure
_Nomad_, thank you!
It works now!!
zorrozorro said:
It works now!!
Click to expand...
Click to collapse
Like music to my ears

Lost Bootloader on G3 - Any Ideas?

Folks
WM5 (wizard love) is working, but can't see the storage card, phone shuts down sometimes, wifi doesn't work anymore and etc...
I should reflash another rom, but I can't see the bootloader screen anymore (just see a black screen when try to enter bootloader mode)
Any ideas ?
-----------
Vario MDA g3
ipl 2.26
spl 3.08
Cid locked
Well, it's impossible to "lose" your bootloader. Your phone wouldn't be working otherwise.
Can you be a bit clearer on you mean?
I can't see bootloader, can't make it appear on the screen (pressing camera on boot)
When I try flash any rom thru WM5, it becomes black when bootloader should be working...
vdalesandro said:
I can't see bootloader, can't make it appear on the screen (pressing camera on boot)
When I try flash any rom thry WM5, it becomes black when bootloader should be working...
Click to expand...
Click to collapse
Well, let's forget the bootloader for a moment.
The core issue is that you really need to get an updated ROM on your phone. First thing to do is remove your SD card. Then connect through Activesync and try flashing another ROM.
Try that and report back.
Nice idea , I`ll try it.
Do you think storage card is causing some error on bootloader?
vdalesandro said:
Nice idea , I`ll try it.
Do you think storage card is causing some error on bootloader?
Click to expand...
Click to collapse
Quite possible. It's been known to cause issues.
It worked!
Now I see the bootloader!
(just take off the mini sd card pressing camera on boot, and I see the bootloader screen now)
Now I'll try reflash something
I never could install WM6 yet, my ipl is 2.26 and my SPL is 3.08.
What should I flash first?
Thx for the bootloader help!
Glad to help. Just follow these instructions, if you haven't already. Then pick a WM6 version that looks and sounds good to you. You may even want to try flashing a few different versions to see what you works best for your needs.
After flash thousand times, in order:
launch rom, t-mobile 2.26 and wm6
I could never succeed!
I've heard something different this link you post from some guys in this forum, that`s because I'm looking for a comprehensive help. Do you think SPL 3.08 will be a problem to me?
It just sounds like you're not unlocked. Follow the instructions CLOSELY in that link to unlock first.

How to Flash in BootLoader

I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?

diamond bricked :( HELP!!!

Its working now - keeping my fingers crossed... it obviously wasn't bricked... i don't know what happened but all i did was flash the radio to what it came with 1.00.25.05 and voila!
guys i need help... i think my diamond is bricked - maybe someone here could tell me if it really has or is there a way out.
the first screen appears the touch diamond screen, and then the windows screen (the green one) and then it restarts... and this is what keeps on happening...
any idea? any help would be much appreciated!
thanks
ps. already tried hard reset... same thing happens...
ps. 1.40olinex unsigned
Have you tried a HARD reset?
tried hard reset - no help
Maybe the ROM is corrupted on yuor phone. Try getting to bootloader and flashing again.
the_scotsman said:
Maybe the ROM is corrupted on yuor phone. Try getting to bootloader and flashing again.
Click to expand...
Click to collapse
i got into the bootloader - connected it to the USB - shows USB on the bottom... how do i flash a rom then? CustomRUU? or is there a way to place the nbh on the internal storage?
There's No way to place it on the internal storage if you cant get into Windows. This is why I always keep a copy of my current ROM in the Internal Storage, so i can reflash if I need to.
Try doing it over USB, it should still work.
no luck
the_scotsman said:
There's No way to place it on the internal storage if you cant get into Windows. This is why I always keep a copy of my current ROM in the Internal Storage, so i can reflash if I need to.
Try doing it over USB, it should still work.
Click to expand...
Click to collapse
tried a couple of times... restarts... either at 10% or 12% or 23%... tried rebuilding the nbh as well
http://forum.xda-developers.com/showthread.php?t=409425
it just restarts randomly!
rom flashed, radio flashed - still restarts
flashed ROM & Radio... but problem still there... restarts after first windows green screen
cloudedhopes said:
flashed ROM & Radio... but problem still there... restarts after first windows green screen
Click to expand...
Click to collapse
if its under warrenty, flash original ROM, Radio and SPL then send it back as faulty
mugglesquop said:
if its under warrenty, flash original ROM, Radio and SPL then send it back as faulty
Click to expand...
Click to collapse
i want that to be the last option i want to try more! someone should have some help here... i hope
mugglesquop said:
if its under warrenty, flash original ROM, Radio and SPL then send it back as faulty
Click to expand...
Click to collapse
hey thanks man - you gave me the idea of going back to originals... i only went back to original radio and it's working
your phone probably didn't like that particular hard-SPL version.

Categories

Resources