no active sync / dsik choice after using shared internet - Touch Diamond2, Pure Q&A, Help & Troubleshooting

i used my d2 this weekend with my laptop but now i cannot choose between te 3 choices , only shared internet connects automaticly ?
i enabled ask me first in settings menu no help!

this is not uncommon, what i do when this happens is this,
plug in phone to pc and wait for it to recognize the phone with the "dunk" noise
manually launch internet connection sharing on the phone
click connect and wait for it to completely connect
click disconnect then close internet sharing
unplug phone, then plug it back in. you should now get the usbtopc pop again

I have a different problems with the selections. The sync runs straight away and then if you choose to share internet the sync stops. Afterwards I need to soft reset to get the sync working again.
This reply is using shared internet on my D2

this worked for me ! thanks
click connect and wait for it to completely connect
click disconnect then close internet sharing
unplug phone, then plug it back in

chch said:
I have a different problems with the selections. The sync runs straight away and then if you choose to share internet the sync stops. Afterwards I need to soft reset to get the sync working again.
This reply is using shared internet on my D2
Click to expand...
Click to collapse
not sure if it will work for you, but what worked for me (HTC touch pro, custom ROM PROven):
1. go to Settings on your HTC, Connections, USB-to-PC, select ActiveSync radiobutton, uncheck the "Ask me first about...." checkbox.
2. connect your phone using active sync.
3. disconnect (unplug)
4. go to that same settings again. Now select the other radiobutton (DiskDrive), AND check the "Ask me first..." checkbox.
When you now again connect your phone, it will (hopefully) ask what connection you want to make.
Otherwise, try changing the order of the above actions.
hope that helps.

Related

cant browse IE on kaiser thru active sync connection

aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
You want to connect to the internet through your home pc via usb/BT?
You might want to try this.. I'm not SURE, just offering a suggestion.. someone can confirm/bunk this either way..
Start|Settings|Connections|Connections
One of the settings there might work for you,
If not.. theres a Little blue Question mark in the top right that actually has some pretty in depth info..
Sorry I couldnt be of more help, but it's a start.
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Monrad said:
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Click to expand...
Click to collapse
Hey m8, i have the same problem and i have tried to follow ur remedy
how ever still i am getting the error "the page cannot be displayed or downloaded because the connection was lost. check the connection and try again later." cannot connect... this is the same with Opera as well.
any having the same problem? is there any one with a fix for this...
sultan said:
any having the same problem? is there any one with a fix for this...
Click to expand...
Click to collapse
if i'm reading right you want to use internet sharing using usb or bluetooth and browse the internet using your PC?? is it?
1.first open setting in your active sync then uncheck allow the usb connection .
2.plug in the usb cable to ur pc and kaiser
3.open the internet sharing in your kaiser end select conection typ usb or bluetooth.
4.connect. (your computer will be installing rds driver automaticcaly)
5.then you'll have a gprs internet trough your pc
note you must have gprs/3g connection available in ur network.
in ur pc in the internet connection option makesure you select direct connection if you use firefox/opera.
Hope this solve your problem.
mikeeey said:
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
Click to expand...
Click to collapse
You are wanting to browse IE on your phone using the Activesync usb or BT connection (phone uses PC's internet connection for data) am I correct in thinking that?
I'm not sure what you mean by 'No comm ports available' as your WM device connects via USB?
Sorry if these steps may seem a bit condecending but best to check all.
1, Has your PC got a working internet connection (can you browse IE on your PC) ?
2, Is Activesync actually working (your contacts and mail are sync'ed) ?
3, In connection settings on Activesync (PC) you need 'Allow wireless connection' unchecked (Checked for tethering, PC goes through phone 3G) or phone will try to go through any data connections of its own first.
4, On your WM device under 'Settings' 'Connections' 'USB to PC, check the 'Enable advanced network functionality'
Hope this helps.
I have a similar query, I can use my PC's internet connection from home, but when I connect to my work PC it does not. Now I know this is down to the fact that my Work PC uses a proxy server, but how do I add this info in to my Tytn2.
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
fisha21 said:
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
Click to expand...
Click to collapse
Your welcome.
Is your device an 'out of the box' HTC device that was not bound to a carrier contract? Some carrier (ie. AT&T Vodaphone) seem to have settings within the ROM (seen in other threads) that tie you in to only using their settings (ie Media.net) and using a proxy that cannot be changed for IE only for GPRS connections.
Anyone got ideas on this one.
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
fisha21 said:
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
Click to expand...
Click to collapse
Are Orange UK (I am from UK but living abroad now) still wanting to promote their own Internet?
I know only last year a pal of mine said he could not connect his Nokia through his home WiFi because it would not connect via his BT Internet.
Check if you have a proxy connection set up on your GPRS cause ya never know!!!
I can connect to any Wifi network and access webpages without problems. Doesn't seem that there are any restrictions from that point of view. Thanks for the help - guess it's not really a problem not having Internet access via ActiveSync, as it connects to the Wifi network.
i guess i shoulda been more specific.
i wanted to browse the internet on my kaiser, using the active sync connection. however it wasnt working, but now ive re-installed opera and it works with that, not sure if it works with IE yet.
installed Opera and still no hope.
my tytn II is out of the box, not on any contract with an operator. can any one please help me..

use Diamond as a modem

I read somewhere you can use the diamond as a modem for a laptop, but i cant seem to get it working. Also i cant find any setting for this.
Has anybody experience with this?? please advice
Well, I don't know about a modem per se, but if you want to use your phone's internet connection to connect to the Internet from your PC, do the following:
Before connecting the Diamond to your PC, start the "Internet Sharing" app (located in Start - Programs). You can select Bluetooth for your PC connection, but it will drain the battery on your phone in NO TIME. Select USB, and then select the network connection you use to connect to the Internet on the phone itself (the default will usually suffice), and then click Connect. This will start the app, at which point you can plug it into your PC and your PC should do the rest.
I use as a modem regularly. I have not found the need to start Internet Sharing before connection....just connect in the normal way, letting ActiveSync do its thing as you have told it to. Just watch after you have finished that the link drops...I forgot once and it cost me! I use MoDaCo Nodata to prevent any unwanted connections. You can also set long-prees-end-key to kill the connection.
SolusCado said:
Well, I don't know about a modem per se, but if you want to use your phone's internet connection to connect to the Internet from your PC, do the following:
Before connecting the Diamond to your PC, start the "Internet Sharing" app (located in Start - Programs). You can select Bluetooth for your PC connection, but it will drain the battery on your phone in NO TIME. Select USB, and then select the network connection you use to connect to the Internet on the phone itself (the default will usually suffice), and then click Connect. This will start the app, at which point you can plug it into your PC and your PC should do the rest.
Click to expand...
Click to collapse
Thanks, i got it to work now!!!
diamond as a modem
i would like, for instance, to replace my home internet connection by using the ''diamond'' as a modem, but it gets so hot after few hours. there is some space for development there and its worth it.
PS. asus p750 do better
I would like to know how i can use the device as a modem to send a fax via my laptop?
nikank said:
i would like, for instance, to replace my home internet connection by using the ''diamond'' as a modem, but it gets so hot after few hours. there is some space for development there and its worth it.
PS. asus p750 do better
Click to expand...
Click to collapse
you can't do much about this other than NOT letting for 3+G at all.
htckaiseruser said:
I read somewhere you can use the diamond as a modem for a laptop, but i cant seem to get it working. Also i cant find any setting for this.
Has anybody experience with this?? please advice
Click to expand...
Click to collapse
the answer, as usual, can be found in my articles (please DO follow the General forum here!):
http://forum.xda-developers.com/showthread.php?t=407563

Internet Sharing!!

im trying to open internet on my diamond through my pc.
i open internet sharing, choose usb, and i cant even press the conect button.
and when i connect the diamond to the pc, i get the options active sync and data storage, no internet sharing!!
anybody have any ideas? anybody had this problem before!!
Marridi said:
im trying to open internet on my diamond through my pc.
i open internet sharing, choose usb, and i cant even press the conect button.
and when i connect the diamond to the pc, i get the options active sync and data storage, no internet sharing!!
anybody have any ideas? anybody had this problem before!!
Click to expand...
Click to collapse
On my ROM what I´m usin right now there are three options after connecting with pc - the 3rd is internet sharing And it connects without any probs
You have to launch the internet sharinf manually in program list or in the connection tab of the setting of Windows Mobile
In my first ROM I had the 3 options when I connect the USB, with the actual I only have the two (active sync and hard drive)
Do someone know the way to activate the choice when I connect the USB ?
thats my problem, and it havent been solved till now..
i just dont have the internet sharing option, i only have 2 options!!
I was thinking that you don't have the internet sharing program too...
Use active sync and then open internet sharing.

Please help!

Hello,
On connecting my Kaiser to the pc, it has stopped letting me choice which mode I would like to put the phone into (active sync or internet sharing) how can I re-enble this?
Im using Chinhe 6.5F rom!
Many Thanks!
search
If I remember well then in active sync options there is an option on which you can set that it asks you which connection to use every time you connect it to your PC. Or maybe it is in connection settings .. don't remember well. Just look for this option below

403 Error While Connected to ActiveSync

For some reason I dont seem to be able to browse web via my mobile browser while device is connected to Activesync (USB cable)
I've checked Allow Wireless Connection and disabled high speed syncing in Conenctions USB>PC on my Xperia.
This affects email and internet data connections and apps. In internet explorer and IRIS I get a 403 error.
I have activesync as "Computer connects to Work Network"
When I disconnect from Activesync I can browse as normal.
Having gone through the usual suspects and done a search I can't seem to find anything that addresses this particular iteration of the 403 error so would gratefully accept any suggest
You don't need the "Allow Wireless Connection when connected to the desktop" ticked. (Unless you want to use WiFi on the X1 while plugged in via ActiveSync).
My ActiveSync "This computer connects to" is set to "The internet", not Work Internet.
Allow USB connections.
On the X1,
Got to Settings, Connections Tab, USB to PC.
Make sure ActiveSync (Sync with outlook) is selected, then make sure "Enable advanced network functionality" it ticked.
cheers for your reply Steve. (good collection of apps too)
These are all options I've tried already (think I've tried every combi) and I end up with the same result - as i get not data connection when i connect the USB. If I open IE or IRIS beforehand and then connect as soon as I browse a new page I get the 403.
I'm sure this didnt happen last time I tried to browse this way but have no idea what could have changed. I thought it could be a connection settings thing - IRIS has loads of options for connections and I've tried all of this, all unsuccessfully. IE doesn't appear to have any options.
Anyone know of any tweaks or reg fixes?
duplicate post
one other thing - if I go to conenction amanger and try to activate Data connection while conencted to activesync, I get sent to the Settings > Connections screen. Data connection will not activate.
I can't offer anymore help Don't know what's up with yours.
cheers anyway steve. gonna wager on a reinstall of activesync and also try on my home pc to see if this is any different.
I know GP can block using device as modem/internet sharing, but this would be different so who knows?
interestingly I've just discovered that I'm still receiving emails when this problem occurs. I wonder if something could be preventing http requests?
just to recap, this works when synced with my home PC, but when synced with my works PC I can't access http via 3g/hsdpa, nor through the PC. I can however receive emails.
As the attachment shows, the phone is connected to the HSDPA and Activesync via USB.
I've reinstalled Activesync on this PC, and experienced an intermittent connection following this - however following this short period of activity the connection halted again.

Categories

Resources