Related
I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
m623d said:
I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
Click to expand...
Click to collapse
when i am at home i have to put my connections on My Isp.. when i am at work due to the firewall i have to use Work Network.. and i can surf just fine through activesync
Depending on what ROM you have, check if it has a proxy setting in your Connections tab.
latest tmobile rom.
has proxy settings, but not set, shouldn't need to.
so no one else has a problem with the latest activesync?
I'm on T-Mobile USA and i'm not having any problems with ActiveSync (Version 4.2) and T-Mobile's latest 2.26 ROM.
Can you post more information about your setup, both PC and MDA? As it could be a configuration issue.
Activesync works fine, syncs all my stuff no probs. Just cant use the internet.
I thought you could just open pie and it would automatically connect?
Can't get to internet using activesync
I can sync, but cannot update pocketweather. Any ideas?
Same problem, internet doesn't work for me at all.
Gosh dunno why I'm having such a hard time with the internet working. On my first 8125 everything went fine, internet work with activesync and wi-fi without setting anything. But now I can't seem to get them to work at all with 2 newer 8125. Try Mr. Clean rom, Molski, summitter, format my computer. None was able to get my internet back? Can anyone tell me what setting did they put inorder to get thier internet thur activiesync and wi-fi.....thou I thought it should just automatically be the same as my comp ADSL ....like before, plug and away I can update weathers and surf net?
Anyone out there, got there internet working smoothly like I had in the first time?
might have the answer, worked for me.
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
But what about eMail?
I have my TMO MDA set up for a Comcast eMail account. When I go GPRS, the eMail works fine.
But when I use Activesynch and my USB cable, I get "Cannot connect with current connection settings...."
Also, is there ANY way to have eMail give me the full message the first time, rather than requiring be me to click on the full message and reconnect?
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
I've been having the sync without passthrough for about 2 months now.
Great. When I try to go into "USB To PC" the application basically crashes. Does anyone know the registry edit that would be needed to disable advanced network functionality?
-AnarchE
thanks!
I've had a sync issue and the issue where passthrough internet didn't work for 2 months. This little change fixed both.
Thanks.
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
Also check Active sync, File -> Connection settings -> this computer is connected to: -> The Internet.
This did the trick for me, now it's updating perfectly.
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
You want to connect to the internet through your home pc via usb/BT?
You might want to try this.. I'm not SURE, just offering a suggestion.. someone can confirm/bunk this either way..
Start|Settings|Connections|Connections
One of the settings there might work for you,
If not.. theres a Little blue Question mark in the top right that actually has some pretty in depth info..
Sorry I couldnt be of more help, but it's a start.
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Monrad said:
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Click to expand...
Click to collapse
Hey m8, i have the same problem and i have tried to follow ur remedy
how ever still i am getting the error "the page cannot be displayed or downloaded because the connection was lost. check the connection and try again later." cannot connect... this is the same with Opera as well.
any having the same problem? is there any one with a fix for this...
sultan said:
any having the same problem? is there any one with a fix for this...
Click to expand...
Click to collapse
if i'm reading right you want to use internet sharing using usb or bluetooth and browse the internet using your PC?? is it?
1.first open setting in your active sync then uncheck allow the usb connection .
2.plug in the usb cable to ur pc and kaiser
3.open the internet sharing in your kaiser end select conection typ usb or bluetooth.
4.connect. (your computer will be installing rds driver automaticcaly)
5.then you'll have a gprs internet trough your pc
note you must have gprs/3g connection available in ur network.
in ur pc in the internet connection option makesure you select direct connection if you use firefox/opera.
Hope this solve your problem.
mikeeey said:
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
Click to expand...
Click to collapse
You are wanting to browse IE on your phone using the Activesync usb or BT connection (phone uses PC's internet connection for data) am I correct in thinking that?
I'm not sure what you mean by 'No comm ports available' as your WM device connects via USB?
Sorry if these steps may seem a bit condecending but best to check all.
1, Has your PC got a working internet connection (can you browse IE on your PC) ?
2, Is Activesync actually working (your contacts and mail are sync'ed) ?
3, In connection settings on Activesync (PC) you need 'Allow wireless connection' unchecked (Checked for tethering, PC goes through phone 3G) or phone will try to go through any data connections of its own first.
4, On your WM device under 'Settings' 'Connections' 'USB to PC, check the 'Enable advanced network functionality'
Hope this helps.
I have a similar query, I can use my PC's internet connection from home, but when I connect to my work PC it does not. Now I know this is down to the fact that my Work PC uses a proxy server, but how do I add this info in to my Tytn2.
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
fisha21 said:
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
Click to expand...
Click to collapse
Your welcome.
Is your device an 'out of the box' HTC device that was not bound to a carrier contract? Some carrier (ie. AT&T Vodaphone) seem to have settings within the ROM (seen in other threads) that tie you in to only using their settings (ie Media.net) and using a proxy that cannot be changed for IE only for GPRS connections.
Anyone got ideas on this one.
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
fisha21 said:
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
Click to expand...
Click to collapse
Are Orange UK (I am from UK but living abroad now) still wanting to promote their own Internet?
I know only last year a pal of mine said he could not connect his Nokia through his home WiFi because it would not connect via his BT Internet.
Check if you have a proxy connection set up on your GPRS cause ya never know!!!
I can connect to any Wifi network and access webpages without problems. Doesn't seem that there are any restrictions from that point of view. Thanks for the help - guess it's not really a problem not having Internet access via ActiveSync, as it connects to the Wifi network.
i guess i shoulda been more specific.
i wanted to browse the internet on my kaiser, using the active sync connection. however it wasnt working, but now ive re-installed opera and it works with that, not sure if it works with IE yet.
installed Opera and still no hope.
my tytn II is out of the box, not on any contract with an operator. can any one please help me..
im trying to open internet on my diamond through my pc.
i open internet sharing, choose usb, and i cant even press the conect button.
and when i connect the diamond to the pc, i get the options active sync and data storage, no internet sharing!!
anybody have any ideas? anybody had this problem before!!
Marridi said:
im trying to open internet on my diamond through my pc.
i open internet sharing, choose usb, and i cant even press the conect button.
and when i connect the diamond to the pc, i get the options active sync and data storage, no internet sharing!!
anybody have any ideas? anybody had this problem before!!
Click to expand...
Click to collapse
On my ROM what I´m usin right now there are three options after connecting with pc - the 3rd is internet sharing And it connects without any probs
You have to launch the internet sharinf manually in program list or in the connection tab of the setting of Windows Mobile
In my first ROM I had the 3 options when I connect the USB, with the actual I only have the two (active sync and hard drive)
Do someone know the way to activate the choice when I connect the USB ?
thats my problem, and it havent been solved till now..
i just dont have the internet sharing option, i only have 2 options!!
I was thinking that you don't have the internet sharing program too...
Use active sync and then open internet sharing.
Hello.I'm looking for a program which have to stop totally GPRS using.There are many programs which use GPRS by default and GPRS costs me a fortune.Is there a program which turns off GPRS entirely ?
Thank you
Sorry for my english,Im still studying it.
I've found a program,but I can't try it.After I removed WMWiFiRouter everytime when I connect the phone to the PC it recognizes it as Windows Mobile based Internet Sharing Device and ActiveSync can't connect to the phone.And the phone no more shows me the menu to choose if I want to connect to the PC through ActiveSync or (I forgot the other) and it appears Internet Sharing program.Help.
Can tell me how to restore my previous type of connection? Thank you in advance.
There is a program called nodata that will allow you to select and disable your GPRS connection. I haven't used it, but it seems to be pretty popular.
Thank you,but I have this program already,as I have written.I'm looking for a solution of the other problem that I've described previously in the topic.
Edit: I don't know exactly what I've done but I fixed it.
I've the same problem (getting no active sync anymore but internet sharing device) so maybe anybody knows how to solve it?
why don't you guys try kaiser tweak, i believe it's got some options for disabling and enabling gprs and activesync. http://www.jongma.org/KaiserTweak/
I've solved it. on my phone at least: i activated the internet sharing via bluetooth, connected, dosconencted. set it to usb and connected and disconnected again and after that active sync worked again....
but thanks for the tool, i'll try that out, too. (maybe there are some other interesting things, too ;-) )
Connecting and disconnecting worked for me too
i used my d2 this weekend with my laptop but now i cannot choose between te 3 choices , only shared internet connects automaticly ?
i enabled ask me first in settings menu no help!
this is not uncommon, what i do when this happens is this,
plug in phone to pc and wait for it to recognize the phone with the "dunk" noise
manually launch internet connection sharing on the phone
click connect and wait for it to completely connect
click disconnect then close internet sharing
unplug phone, then plug it back in. you should now get the usbtopc pop again
I have a different problems with the selections. The sync runs straight away and then if you choose to share internet the sync stops. Afterwards I need to soft reset to get the sync working again.
This reply is using shared internet on my D2
this worked for me ! thanks
click connect and wait for it to completely connect
click disconnect then close internet sharing
unplug phone, then plug it back in
chch said:
I have a different problems with the selections. The sync runs straight away and then if you choose to share internet the sync stops. Afterwards I need to soft reset to get the sync working again.
This reply is using shared internet on my D2
Click to expand...
Click to collapse
not sure if it will work for you, but what worked for me (HTC touch pro, custom ROM PROven):
1. go to Settings on your HTC, Connections, USB-to-PC, select ActiveSync radiobutton, uncheck the "Ask me first about...." checkbox.
2. connect your phone using active sync.
3. disconnect (unplug)
4. go to that same settings again. Now select the other radiobutton (DiskDrive), AND check the "Ask me first..." checkbox.
When you now again connect your phone, it will (hopefully) ask what connection you want to make.
Otherwise, try changing the order of the above actions.
hope that helps.