i am running EnergyROM 3.0 'Phoenix' (21728)
and i tried installing SocialNetworkingEngineCAB
and it tells me i have insufficient permissions, what do i do?
Go to settings > Today and turn off TouchFlo, reset. Then install again and you can turn Touchflo back on.
ahh yeah, of course silly me, thanks mate- i'll give it a try
Related
I thought I downloaded and installed Diamond TF3D Config program. It's the one that you can change the tabs on the home page, add and delete tabs, right?
Well, it seems it was slowing down my setup so I tried to delete it several ways and each time it's still there.
So tonight, I came home and did a hard reset. Settings - clear programs - 1234
That does a hard reset, right?
Well, it redoes everything and guess what, the Diamond TF3D Config
program is STILL there....
Am I missing something?
FWIW, I'm using Dutty's 1.4 version ROM
Thanks,
Mark
That is indeed a hard reset. It might be a part of the customizations and to get rid of that, do a soft reset right before the customizations initialize.
Try going to settings/today/items/unclick Touch flo 3D
If you haven't tried it....
Will
I used Dutty's 2.2 ROM and the programme comes pre-installed as part of Dutty's ROM it seems. Using the advice above about soft-resetting before it installs the customisations should work (?) but then you won't have any of the other awesome apps Dutty pre-loads.
Also, I can;t say i have noticed the TF3D config affecting speed (when tried on my stock ROM) especially when the Advanced Configuration tweaks are applied.
Just my thoughts
The loading times for web-pages on my Diamond are SLOW. I am about to upgrade to a new radio (1.00.25.05) when my Diamond is charged enough, will this make a difference? What other reasons could there be? This is my first 3g phone and I cannot believe how slow the pages load - youtube pages take an age!
Please help!
S.
Arghh! Just tried to update but when i go to open RUU i get a message telling me i need to use a different version of the .net framework (an older one i think).Any thoughts?
...
Hey simcarloc
first of all goto Start > Settings > Connections > Wireless lan > power Mode > and set it to Best performance..
then try browsing some pages again
the problem with the net framework shoud be simple to fix
download and install Microsoft .NET Framework Version 2.0 and if that doesnt work try the Microsoft .NET Framework 3.0
That's way better! Web-pages are loading faster now. Thank you so much...
Youtube is still quite slow to load though, any ideas?
..
No problem..
dont know about the Youtube thingy, try a softreset and see how it responds to that
Ok, i'll try that. Could you also tell me how to get the original ring-tones back as after the Swift upgrade I only have a couple or so...
Just trying to think of everything I need!
Hey guys,
I liked the Manilla 2d, but i got frustrated since most of the functions wont use my default apps and since most of the functions utilize a data connection which im not paying for. I tried remove the app. However, some of the logos on the start menu still show up from the old manilla 2d theme. Occasionally the vibrate icon will be the M2D version which is annoying because it has a separate layout I dont like.
I tried to remove the M2D by using the settings> system>remove programs, but it fails after trying for like 10 minutes. So what I did was I went to start>settings>system>today and I unchecked touchflo and i checked HTC Home and HTC Home Plugin, but now I still see the volume control from manilla 2d. Help me get rid of Manilla.
Side Note: Manilla 2d is a great theme, but Im only on a unlimited messaging plan so i cant make use of the weather, maps, and youtube functions. Furthermore it refuses to use my defaulted contact manager or text messaging manager.
Use a ROM without M2D.
Info is helpful...what ROM are you using?
I hate to be this guy, but i used a hard reset to get rid of my M2D and now it runs just fine. Remember to back everything up and you'll be ok. Take the jump! :]
att stock rom wm6.1
RubberDucky451 said:
I hate to be this guy, but i used a hard reset to get rid of my M2D and now it runs just fine. Remember to back everything up and you'll be ok. Take the jump! :]
Click to expand...
Click to collapse
This sounds like it might be the only option at this point. Might I recommend PIM Backup to back up all of your info.
As stated in the M2D thread "IF YOU USE THESE BETA FILES EXPECT TO DO HARD RESETS EACH TIME A NEW UPDATE COMES OUT"
This would apply to uninstalling M2D as well.
i had a skin installed,i.e a cab file.earlier i installed skins on my viva(opal)without any error but now it shows 'Tap Here to launch touchflo' and then even after tapping nothing happens..the phone just shows 'initialising touchflo' message and then again says 'tap here....'.any1 have a solution for this.pls help.
so do u want the touch flow or not?
ya of course i want the touchflo its so cool.pls sum1 help.
Solution:Tap Here to launch touchflo error
If you have M2D customizer, just open it & go to Launcher tab then change settings to Number of Columns: Three and Number of Rows: Six. Apply and ok.
One Solution
Another solution is....well let me change the course of thought...theres a new today screen plug-in that strikes a similar look to TouchFlo but with a cooler look Check it out.
Link: http://forum.xda-developers.com/showthread.php?t=544813
hey i tried installing a theme from a .cab .Since it never worked i tried restoring a backup i made before applying the theme....but it says "tap to launch touch flo...." and when i tap the screen it says launching touch flo.....but it just repeats its self....
i tried setting rows to 6 and columns to 3 in m2dc ..but no effect
plz help
ok problem solved ..i just uninstalled the previous theme..
i cant make mine work
ive tried uninstalling applications such as UITweaker and the two themes ive installed but still no luck. can anyone tell me what to do? it was working well for about a week now but suddenly, my touchflo was gone
i too get the "Tap here..." error when i installed a touch flo theme on my HTC Viva.i even tried copying the files to Windows folder,but that didnt work either.Help...
I get that error when I try to install Touchflo (or Manila2d or FTouchFlo) on my cloned Jade.. suggestions would be much appreciated
I had the same problem when i installed certain .cab files. i had deleted them and even did a hard reset but the problem persisted. solution - try deleting messages (SMS ) from your phone..it takes up memory. mine got solved! touchflo working fine now!!!
anithjkannankeril said:
I had the same problem when i installed certain .cab files. i had deleted them and even did a hard reset but the problem persisted. solution - try deleting messages (SMS ) from your phone..it takes up memory. mine got solved! touchflo working fine now!!!
Click to expand...
Click to collapse
I have same problem... This did not correct it. Anybody have other ideas? thanks!
Recently got a diamond touch and as it was previously locked to vodafone with some apps like opera seemingly tied in decided to flash it.
anyway all working good with wm 6.5 and touch FLO 3d2 installed but now im suffering memory issues.
an exmple of this is if i try to play any youtube clip i get not enough memory please close some running programs , even though nothing else is running.
also had this happen when trying several other apps.
could it be the diamond just doesnt have enough power when it comes to internal ram and rom to run apps well enough and that im gonna have to revert back to 6.1.
anyone else had this issue or know of a workaround
Theres lots off apps you can get to free up ram on your device, some are freeware look on google, also you can try disabling any home sceen plugins like tf3d and such b4 running any resorce hungry applications, and finally check what apps boot up with windows, disabling these can allso free up ram
im running htcaddicts clean ram but even if i run that direct b4 hand on a lvl 2 pass i stil get the issues. not sure how i would disable touch flo and tbh thats not really an option as i use the programs tab to access most stuff so disabling would mean navigation changes.
Im sure ive read a post on forum about some hardware settings you can change regarding cahche settings, flushing etc but cant for life of me find it anywhere
Try Schap's Advanced Configuration Tool you should be able to use that to tinker with cache settings ect
update on this, the memory problem even after hard reset and clearing cache is still an issue
build is wm 6.5 23016
memory shows as 107.96mb
now even running or trying to run the in built game teeter gives me the exact message
Initialize teeter fail.
Memory is not enough.
this is a real puzzle as even running clean ram and clearing cache and stuff and checking in task manager nothign seems to get round this.
has anyone else experienced this issue using 6.5