:eek: My Blackstone almost bricked:o - Touch HD Windows Mobile ROM Development

I was flashing my Blackstone before few minutes with stock 1.57 wwe ROM.
I normally have the habbit of removing the sim and memory card while flashing. so, i'll keep the back cover off while flashing.
When the progress was around 40%, i got a call in my another standby mobile and in hurry i pulled the usb cable .My blackstone got pulled down together with the usb cable and battery came out(As there is no back cover).
I got shocked and looked at the screen as the usb cable was not removed from my device.
To my surprise, the progress bar didn't stop and ROM update was continuing without the battery.
I came to full conciousness after some more 105 progress and inserted the battery while it was updating.
When the flash was complete, the device started as usual without any problem
So, it seems that the device is powered from usb during flashing

I think this happens if you flash from the SD card too.

skyli91 said:
I think this happens if you flash from the SD card too.
Click to expand...
Click to collapse
With SD card?
no. I think you mis understood.
When flashing with SD card, you won't be connected with PC.
In my case, the battery came out of the device while flashing.

lucky you're

This is called Holy of HD Users...
Just to be sure that is not a lucky, could You repeat the step again twice?
LOL

skr_xd said:
With SD card?
no. I think you mis understood.
When flashing with SD card, you won't be connected with PC.
In my case, the battery came out of the device while flashing.
Click to expand...
Click to collapse
Yes becouse when i flashed trough SD card and my HD was in usb becouse before flash i always use USPL. When i wanted to turn off the phone after flashing i took out the battery but i had to take out the cable too to turn off

I think you're ok while you still got a working bootloader. I once flashed a rom that was incomplete...the dowload got canceled for some reason which I hadnt noticed. However winrar extracted without reporting any errors and it also flashed without problems. When my phone wouldnt boot beyond the HTC screen I started checking things. The .nbh file was way too small
Anyway I flashed it again and it was working again...

should be alright since you have hspl 1.56 on your phone
would be screwed if it was normal spl/uspl and it was in middle of flashing the spl part of the rom upgrade when power was lost!

Anytime your phone is connected to an external power source it does not require the battery to power it... this is quite normal You can take the battery out anytime it is plugged in.

Related

Kaiser Issue - Bootloader only .. OS suddenly won't load.

I've got a weird one. Yesterday, my phone was running fine (I've had Dutty's rom on it for about 4months), I lost sound and needed a reboot. I rebooted and immediately got the RGBW bootloader screen. Successive reboots gave me this. I removed my flash card and tried again - was able to get in the O.S. but I still had no sound, so I rebooted again. Now I can't seem to get past the bootloader.
I'm probably going to try a reflash of the ROM, but I'm curious if there is another option since I'd rather not lose my data.
Any thoughts?
--Edit--
Bootloader screen says:
"KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8"
Bottom says: "Serial"
dude i am sorry to inform you but without an os back up is impossible
*just a thought - try removing SC Card and Sim Card and Remove Battery for some time then put everything back and try.. but most likely.. dont put lots of hope on this..
KyleK29 said:
I've got a weird one. Yesterday, my phone was running fine (I've had Dutty's rom on it for about 4months), I lost sound and needed a reboot. I rebooted and immediately got the RGBW bootloader screen. Successive reboots gave me this. I removed my flash card and tried again - was able to get in the O.S. but I still had no sound, so I rebooted again. Now I can't seem to get past the bootloader.
I'm probably going to try a reflash of the ROM, but I'm curious if there is another option since I'd rather not lose my data.
Any thoughts?
--Edit--
Bootloader screen says:
"KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8"
Bottom says: "Serial"
Click to expand...
Click to collapse
jahrami said:
dude i am sorry to inform you but without an os back up is impossible
*just a thought - try removing SC Card and Sim Card and Remove Battery for some time then put everything back and try.. but most likely.. dont put lots of hope on this..
Click to expand...
Click to collapse
Well, it's not a total loss. I have a backup of my settings from about 3 months ago and all my PIM data from 2 nights ago. I was just hoping to be able to recover most of it.
Thanks for the idea though, no luck. Here's hoping the new flash will work!
So I added the newest version of Dutty's - phone took it fine. I installed some apps, rebooted multiple times, worked for like 30minutes. Rebooted after installing one of the apps asked me to, and BLAM .. bootloader.
Would it be reasonable to assume that the ROM in this thing might be hosed?
Interesting I had the EXACT same issue yesterday with a the Default ATT ROM.. I was going to try Duttys since Its already wiped
Ransom342 said:
Interesting I had the EXACT same issue yesterday with a the Default ATT ROM.. I was going to try Duttys since Its already wiped
Click to expand...
Click to collapse
Yeah, mine seems to be fubar'd. I tried flashing Dutty's ROM again, it took the flash, rebooted, and immediately gave me the bootloader again with a blank image.
*edit*
Tried again with a different ROM. It got to the loading screen for the OS, as soon as I rebooted it went back to the bootloader with a blank OS.
Looks like my ROM is fubared. I think my warranty is up, or coming up very soon. Does HardSPL void it? Because I'd assume that is the only thing they can tell was done.
of course hard spl will void ur warranty but if u can revert to orgininal spl
http://forum.xda-developers.com/showthread.php?t=335568
KyleK29 said:
Does HardSPL void it? Because I'd assume that is the only thing they can tell was done.
Click to expand...
Click to collapse
Same issue - Semi Fix
Hi Kyle,
I started having the same exact problem three weeks ago (it is now Sep.18.2008). I've got no sound coming from my phone, and when I reboot I get the bootloader screen.
my FIX: Plug the phone into it's usb cable, and have it plugged into a source (computer, power jack, etc).
When I reset my phone with it plugged into the usb cable, it finds the rom and loads up perfectly. But when I reset without it, I get the bootloader. I still have not figured out why it is doing this. CAVEAT: this only works with my usb cable plugged into the power outlet of MY CAR. I know...it's weird...but that's what's working for me. When plugged into the computer I still only get the bootloader - it works in the car only. But I suggest you try your car, computer, and a wall outlet if you have one for usb and see what works for you. I find that I rarely reset my phone anyway, but it's just annoying when I do.
I hope this message hasn't found you too late :S Cheers
May anyone can help me ?
Kaiser 100 (TILT 8925) during Flashing, the battery was discharged. Now it does not join, the green light diode only burns at power ON attempt.
The computer defines it on USB as Flash device, but the driver from ActiveSynch do not approach.
How to restore it ?
What buttons for input in Flash mode (tricolor) ?
BR !

HELP ME! My Tilt Is Bricked.

Ok, so today I tried to flash my Rom with the official att 6.1 rom from HTC. I got it to finally start flashing after about ten tries but when it reached about 13% it gave me an error 276 I think. I tried the recovery method suggested by removing the battery for 3 seconds and reseting the device but now my device isn't recognized in windows and I can't run the upgrade file anymore.
It just goes to the bootloader screen with "KAIS1*0" on the top, then "SPL-3.02.000" below that, and "CPLD-8" below that. At the very bottom it shows USB but my computer doesn't recognize the device. I've tried hard reseting it and it just goes back to the bootloader screen.
Is there any way I can get my Kaiser back or am I screwed?? All this waiting for 6.1 and now my phone is dead. What a load of crap.
Just re start the ruu and let it sit for a minute when that happens, it will start again by itself. Almost shat myself when it happened to me.
First of all, relax. Your phone is not bricked. Do a little looking around the forums and you will resolve this.
I am too lazy to search for him but is the 3.02 SPL compatible with the 6.1 ROM?
I can't restart the Ruu because I can't get a usb connection to my phone. The bootloader goes into usb mode but my computer does not see the phone. The Ruu says it cannot detect the phone either.
Isn't there a way this guy can re-flash using a MicroSD card?
MineralGray02K said:
Isn't there a way this guy can re-flash using a MicroSD card?
Click to expand...
Click to collapse
I'm not sure if the OEM SPL has the ability to flash from card like the Hard SPLs.
To test put the Carrier ROM (Download from the Wiki) on to the root of the MicroSD Card and call it KAISIMG.NBH. Turn on the Phone with the Camera Button Held Down. It should try and flash the ROM then. If that doesn't work, I have a thread and wiki page all about getting stuck on the bootloader, check my Sig for more info.
Hope this helps.
Dave
rodavery said:
Ok, so today I tried to flash my Rom with the official att 6.1 rom from HTC. I got it to finally start flashing after about ten tries but when it reached about 13% it gave me an error 276 I think. I tried the recovery method suggested by removing the battery for 3 seconds and reseting the device but now my device isn't recognized in windows and I can't run the upgrade file anymore.
It just goes to the bootloader screen with "KAIS1*0" on the top, then "SPL-3.02.000" below that, and "CPLD-8" below that. At the very bottom it shows USB but my computer doesn't recognize the device. I've tried hard reseting it and it just goes back to the bootloader screen.
Is there any way I can get my Kaiser back or am I screwed?? All this waiting for 6.1 and now my phone is dead. What a load of crap.
Click to expand...
Click to collapse
run this while phone is hooked up to computer stuck in bootloader.
Sweet Jesus
Ok, I tried the tri-color fix from nufsaid. It didn't work b/c it couldn't open a usb port or didn't see the phone or something. Then I tried putting the rom on my microSD card.
And *SHAZAM* there it was. DaveShaw you are a god to me now. It said the update was successful but I'm still stuck in the bootloader. It used to work if I would plug it into the wasll charger and reset it but that isn't working now. My computer still doesn't recognize it so Mtty or anything still doesn't work.
Ok, I left my tilt on the tri-color screen all night long to run down the battery. When I woke up I tried to power it on and I got the familiar ATT flash screen but when I plugged it into the AC power it went straight into the bootloader.
I don't know what's worse, bootloader or red light of death, I just experienced the red light, called att and got a new phone sent out in 12 hours! What SPL does your phone show? they might exchange if it's not 'voided'
ok, I finally got it to load the windows. If the battery has a high charge or is charging resetting won't get out of the bootloader. If I let the battery run down to almost nothing, wait a little while with it out, then try it again it will turn on. my spl is now 3.56.0000.
Finally
I finally got it out of the bootloader. I'm never going to reset my phone again. It's gonna suck if it freezes. Thanks for all the help.
rodavery said:
I finally got it out of the bootloader. I'm never going to reset my phone again. It's gonna suck if it freezes. Thanks for all the help.
Click to expand...
Click to collapse
Glad your back up and running. There are two new hard SPL's be cmonex (they are mentioned in the link in my sig) that make it less likley for you to get stuck at the bootloader. You could try those?
Ta
Dave

Can't flash Kaiser HardSPL in any way???

Iv'e tryed to flash HardSPL to Kaiser... Downloaded various unlockers/flashers, even SD card solution... When trying to flash over usb with some Kaiser-HardSPL.exe - after entering tricolor mode and when progressbar appears it always stuck on 0%, and nothing happens... Update utility shows error (Rom update utility encountered communication error or smth.) and sugests me to do recovery. Tryed everything - SoftSpl1.56, Softspl1.93, SSpl-kais...
Other method i've tryed - SD card
Iv'e followed instructions, formatted card, copied those two files (http://forum.xda-developers.com/showthread.php?t=420683) to sd card, but after resetting Kaiser it only shows "Loading..." and hangs... no restart, nothing... just "loading..." on screen...
Bootloader menu shows following versions:
KAIS130
SPL-3.29.0000
CPLD-8
somehow... after trying another 1000 -th time... it just flashed...
Have exactly the same problem, tried all other solutions! any idea on what the last method was that worked?
When flashing via USB it will hang at 0% (and fail w/ 260 error on PC side) if the SD card is left in. I've made that mistake more than once.
Remember to remove SIM, too.
I don't have sd card and I've got the same problem...
Any ideas?
I have the same problem. I want to upgrade Hard SPL 3.24 to newer version. I always get 262 error. Also tried all possible ways (MicroSD uses FAT32, but I didn't formatted It, because I don't have SD adapter).
Sometimes It's shown that flashing complete, but HardSPL version still is the same.
Read you noobs
FOLLOW THE DIRECTIONS
http://forum.xda-developers.com/showthread.php?t=396922
latinohot, I'm doing all right...
EDIT:
I changed cable, and it went for the first time
Biker182 said:
latinohot, I'm doing all right...
EDIT:
I changed cable, and it went for the first time
Click to expand...
Click to collapse
good, also check the contact pins, sometimes they get bent.
hmmm...
i STILL can't get hardspl to work at all...just get stuck at 0%
sabzi43 said:
i STILL can't get hardspl to work at all...just get stuck at 0%
Click to expand...
Click to collapse
Are you using sspl to upgrade? sim and sd out? usb cable or sd flash? Do you already have a hspl and are just upgrading?
If you're on an original spl you must use sspl to do it.
If you're upgrading then you can use the kaisdiag file by cmonex and an sd.
aaaaahhhhh
WarByte said:
Are you using sspl to upgrade? sim and sd out? usb cable or sd flash? Do you already have a hspl and are just upgrading?
If you're on an original spl you must use sspl to do it.
If you're upgrading then you can use the kaisdiag file by cmonex and an sd.
Click to expand...
Click to collapse
I'm using usb to windows 7, sim and sd were out.
The thing is i've never done this before, but i am pretty sure i have it down...
I tried this I think 3 times then started to panic when after the recover from the freeze, i noticed things being weird, so i hard reset so i still have a functioning phone until i figure this out.
(it still has bugs it never had before :/)
ive downloaded numorous hardspls, all didnt work.
it's been one saaaaaaaaaaaad experience cuz i really want to make this happen and brag to my guy friends I FLASHED MY PHONE.
and get win 6.5, of course.
any help much appreciated!!!!!!!
sabzi43 said:
I'm using usb to windows 7, sim and sd were out.
The thing is i've never done this before, but i am pretty sure i have it down...
I tried this I think 3 times then started to panic when after the recover from the freeze, i noticed things being weird, so i hard reset so i still have a functioning phone until i figure this out.
(it still has bugs it never had before :/)
ive downloaded numorous hardspls, all didnt work.
it's been one saaaaaaaaaaaad experience cuz i really want to make this happen and brag to my guy friends I FLASHED MY PHONE.
and get win 6.5, of course.
any help much appreciated!!!!!!!
Click to expand...
Click to collapse
copy sspl.exe into your device and run it then you can flash with CustomRUU
to much better you are using ActiveSync on Windows XP
Thanks so much!!! i got it to work!!!! i actually used a jump spl instead, but i now am running win 6.5 on my kaiser!!!!!!! and i'm beyond stoked
THANKS Y'ALL!

Almost Bricked HD

Hi everyone,
I've got a HTC Touch HD from Telstra, been using it for a long time. Recently the USB has stopped working correctly. I can charge it fine but can't get it to connection in Activesync mode or as USB Storage.
I have ruled it to be the phone:
Tried two PCs, even the PS3 doesn't detect anything is connected (Just shows phone is charging)
Tried XP, Vista and Windows 7 (fresh installed).
I have hard reset the phone many times.
It is under warranty, I have flashed Dutty's Extreme rom onto it and want to simply put a stock rom on it (preferrably Telstra) so I can send it away - or see if that fixes it.
I can't install any unsigned roms as I need USPL (via USB), I can't install signed roms as if I put them on there I get '00028002 Not Allow'
Where can I got next? I can still put BLACIMG.bbh files on the storage card but can't get any to flash.
It has SPL 1.54 and Radio 1.14.25.24.
I really want to flash it with: Duttys HD WM6.5 R7.
Thanks.
MattJ1989 said:
Hi everyone,
I've got a HTC Touch HD from Telstra, been using it for a long time. Recently the USB has stopped working correctly. I can charge it fine but can't get it to connection in Activesync mode or as USB Storage.
I have ruled it to be the phone:
Tried two PCs, even the PS3 doesn't detect anything is connected (Just shows phone is charging)
Tried XP, Vista and Windows 7 (fresh installed).
I have hard reset the phone many times.
It is under warranty, I have flashed Dutty's Extreme rom onto it and want to simply put a stock rom on it (preferrably Telstra) so I can send it away - or see if that fixes it.
I can't install any unsigned roms as I need USPL (via USB), I can't install signed roms as if I put them on there I get '00028002 Not Allow'
Where can I got next? I can still put BLACIMG.bbh files on the storage card but can't get any to flash.
It has SPL 1.54 and Radio 1.14.25.24.
I really want to flash it with: Duttys HD WM6.5 R7.
Thanks.
Click to expand...
Click to collapse
Previously you could flash cooked roms, but now you are unable to flash any, correct?
When in bootloader does it still change from 'serial' to 'usb'? Have you tried another usb cable?
Yes I could flash cooked roms, only by using USPL.
In bootloader when I have the cable plugged in it is blank where it should say USB, I take it out and it says 'Serial'
I have also tried the cable from my old Touch Diamond (which both cables work fine with the Diamond).
MattJ1989 said:
Yes I could flash cooked roms, only by using USPL.
In bootloader when I have the cable plugged in it is blank where it should say USB, I take it out and it says 'Serial'
I have also tried the cable from my old Touch Diamond (which both cables work fine with the Diamond).
Click to expand...
Click to collapse
What happens when you try and run either USPL or HSPL?
On the computer? It can't detect USB. Both computers don't even get to the stage where it installs drivers.
The PS3 would even say 'Unknown USB Device Connection' but it doesn't. I just get power through USB to charge it, that is it.
Is there a rom I can flash to my phone via the storage card in the state it is in?
MattJ1989 said:
On the computer? It can't detect USB. Both computers don't even get to the stage where it installs drivers.
The PS3 would even say 'Unknown USB Device Connection' but it doesn't. I just get power through USB to charge it, that is it.
Is there a rom I can flash to my phone via the storage card in the state it is in?
Click to expand...
Click to collapse
Unfortunately you cannot flash through storage card unless you have USPL on device.
Sad face. lol.
Can I get USPL or HSPL on through the Storage card... wishful thinking here.
Can I send it to HTC and pay for it to be repaired? Will they even touch it being a modified phone? Maybe I'll just send it through Telstra and see what happens.
MattJ1989 said:
Sad face. lol.
Can I get USPL or HSPL on through the Storage card... wishful thinking here.
Can I send it to HTC and pay for it to be repaired? Will they even touch it being a modified phone? Maybe I'll just send it through Telstra and see what happens.
Click to expand...
Click to collapse
USPL & HSPL both require usb to be installed and cannot be installed through SD card as phone needs to be in bootloader.
You could send phone to be repaired but I'm sure the cost would be high and going down warranty route wouldn't work either as you've voided warranty already by using cooked rom.
Have you followed correct guide for installing drivers?
maybe it's something as silly as "Enable Faster Data Transfer" under USB to PC settings :/ just had problems connecting mine until i unticked it, even though i never turned it on or off, seems to work sometimes, other times not :/
MattJ1989 said:
Sad face. lol.
Can I get USPL or HSPL on through the Storage card... wishful thinking here.
Can I send it to HTC and pay for it to be repaired? Will they even touch it being a modified phone? Maybe I'll just send it through Telstra and see what happens.
Click to expand...
Click to collapse
Here is your only choice though.
After upgrading to new ROM, try it again whether it can connect to pc or not?
Connect your SD card to PC through microSD card. Copy all files from your SDcard to new folder in your PC. Then, right click on the microSDcard disk-->full Format by FAT32 (this step is very important).
After formatting SDcard, copy back all files to SDcard . Rename .nbh to BLACIMG.nbh (for Blacktone) and copy it to SDcard.
Insert your SDcard back to Touch HD. Turn off your device by Power button.
Go to Boot loader mode. Push and hold Vol. Down + press Power button.
After that your device with have a white screen with text " Press to power button for continue upgrade" press power button and it will start upgrade Rom.
You can check this video for more practical actions on youtube.(this video for HTC diamond2 but it's almost the same with Blacktone just different in rename step)
Hope it helps and cheer
But that's the thing I can't get any rom to work through the BLACIMg.nbh storage method
I think I'm either going to have to stick with the current rom, have no usb transfer.
Or pay up to repair it
EDIT: I already tried the "Enable Faster Data Transfer" and that didn't help Thanks.
MattJ1989 said:
But that's the thing I can't get any rom to work through the BLACIMg.nbh storage method
I think I'm either going to have to stick with the current rom, have no usb transfer.
Or pay up to repair it
EDIT: I already tried the "Enable Faster Data Transfer" and that didn't help Thanks.
Click to expand...
Click to collapse
Where is your MicroSD card ? Connect your SD card to your PC via MicroSD card.
Right,
you don't need anything installed on your phone to run uspl.
Put blacimg.nbh on your sd card with a card reader.
Now with the card still unplugged put your phone into bootloader mode.
Now connect it to your computer, does serial change to usb??
Now insert your storage card.
Now run crackwhores USPL GUI and fingers crossed it should start flashing.
If that doesn't work let us know!
Also, what cable are you using, the one that came with the phone or a normal usb one??
Cheers,
Jake
No usb connection
So if i don´t get the usb connection in tri-color mode i´m in big trouble right?
I got the same problem
Mine is only saying serial on three diffrent computors... this is not good, i went to buy my self a new phone.
If i were you i would try 2 things.
There was a temporary spl which you would run from inside the OS and then that would give you access to either uspl or hspl.
If that wouldnt work, i would buy a usb replacement kit from ebay and install it myself tbh.
In the same situation
I too, tried everything under the sun for my Telstra HD but cannot get the USB connection to work before. Here's my short thread. I'm pretty sure there isn't anything that can be done flashing wise through the SD card because of our SPL 1.54.0000.
After a week of stuck in this situation I was going to take my phone to a shop and have the usb port replaced. I'm sure it will cost an arm.
In terms of replacing the port myself, has anyone tried? Is it tough to do? I thought soldering skills were involved.
supadupa111 said:
I too, tried everything under the sun for my Telstra HD but cannot get the USB connection to work before. Here's my short thread. I'm pretty sure there isn't anything that can be done flashing wise through the SD card because of our SPL 1.54.0000.
After a week of stuck in this situation I was going to take my phone to a shop and have the usb port replaced. I'm sure it will cost an arm.
In terms of replacing the port myself, has anyone tried? Is it tough to do? I thought soldering skills were involved.
Click to expand...
Click to collapse
Once you open up device warranty is voided permanently. If you paid for a replacement usb port and something else happened you could still return under warranty, but once opened option of warranty is forever closed!
As of now, its the only route because the lack of original spl has already voided my warrenty... =(
Ha. Today must be my lucky day!
I was a breath away from spending $75 to have my HD ripped apart to replace the usb port yesterday. But all of a sudden the port once again works and is recognized in bootloader mode.
All I did was hard reset once, used as normal, and plugged in via usb to charge with power on (just to see if it might work this 187429th time) and the usb menu (activesync, disk drive...) came up. I retried. It didn't work (just as I thought). Went to bootloader and it also didn't work. Restarted, usb menu was up again. Rebooted bootloader a few times and suddenly usb came on.
I will proceed to flash hspl 1.56 immediately.
To the dudes that still can't connect: DON'T GIVE UP YET, KEEP TRYING!

[Q] Help! Problem with... alot!

Need some help in getting a stock rom to work and flashing a custom rom once thats' fixed.
I decided to go back to a basic HD2 and reload my custom rom on a fresh system. I downloaded and installed a stock rom, went to install my custom rom (Elegancia v2) and a couple things happened. First the flash failed with an error that there was a communication problem, though I could see the device on Active Sync. Now it's stuck at the white HTC page when I turn it on so something is wrong with the stock rom is some way to prevent it from booting through. It did that yesterday but not today. All I"ve done is continue to try to flash the custom rom and fail.
A magic bullet would be nice here.
Ok sense you posted this in the T-Mobile Development section I assume you have a TMOUS HD2 and I also am going to assume you got your stock ROM via the official T-Mobile HTC HD2 upgrade. You can try to reflash the ROM by manually putting your HD2 into bootloader (muticolor screen). Turn your HD2 off and then turn it back on but hold down the volume down button as it is booting it will bring up bootloader. Connect your HD2 via USB cable to your computer and wait until the Serial in the white bar of bootloader changes to USB and your computer regonizes your HD2 (this should happen simultaneously). Right click on the update utility and click on run as adminastrator.
But if you keep getting the communication error you can try flashing via a SD card. You will need a SD card formated Fat 32 it is recommended to use a smaller GB card but if you format your 16GB SD card it should work. Make sure you make a back up copy of your SD card on your computer before you reformat it. To learn more abput how to do this go to this thread. It can tell you all you need to know to flash via SD card. Also when you rename the Ruu_signed.nbh file it is not case sensative so you can name it LEOIMG.nbh or leoimg.nbh it does not matter. Be advised though no matter wich method you use to flash you will have to reflash HSPL to your HD2 before you can flash your custom ROM.
T-Macgnolia said:
Ok sense you posted this in the T-Mobile Development section I assume you have a TMOUS HD2 and I also am going to assume you got your stock ROM via the official T-Mobile HTC HD2 upgrade. You can try to reflash the ROM by manually putting your HD2 into bootloader (muticolor screen). Turn your HD2 off and then turn it back on but hold down the volume down button as it is booting it will bring up bootloader. Connect your HD2 via USB cable to your computer and wait until the Serial in the white bar of bootloader changes to USB and your computer regonizes your HD2 (this should happen simultaneously). Right click on the update utility and click on run as adminastrator.
But if you keep getting the communication error you can try flashing via a SD card. You will need a SD card formated Fat 32 it is recommended to use a smaller GB card but if you format your 16GB SD card it should work. Make sure you make a back up copy of your SD card on your computer before you reformat it. To learn more abput how to do this go to this thread. It can tell you all you need to know to flash via SD card. Also when you rename the Ruu_signed.nbh file it is not case sensative so you can name it LEOIMG.nbh or leoimg.nbh it does not matter. Be advised though no matter wich method you use to flash you will have to reflash HSPL to your HD2 before you can flash your custom ROM.
Click to expand...
Click to collapse
Tried that and no joy. I can get to the bootloader and see USB at the bottom of the screen but it won't go beyond that. Such is life. I worked it out with TMobil to exchange the phone with no penalty (hopefully that sticks0 but I'd still like to get my old one working. Not idea how I got stuck on the white page nor why this is happening at all but I want to try to prevent it in the future.
rogerperk said:
Tried that and no joy. I can get to the bootloader and see USB at the bottom of the screen but it won't go beyond that. Such is life. I worked it out with TMobil to exchange the phone with no penalty (hopefully that sticks0 but I'd still like to get my old one working. Not idea how I got stuck on the white page nor why this is happening at all but I want to try to prevent it in the future.
Click to expand...
Click to collapse
Hmmmm when you have your HD2 plugged into the computer while in bootloader and it says USB in the white bar of bootloader. Go down to the bottom right of your task bar and click on the little icon to safely remove a device. See if it lists your phone as "HTC USB Sync". If it does not list it as this you need to either try another USB port or update your USB drivers. Try updating the drivers while your HD2 is connected to your computer and in bootloader.
rogerperk said:
Tried that and no joy. I can get to the bootloader and see USB at the bottom of the screen but it won't go beyond that. Such is life. I worked it out with TMobil to exchange the phone with no penalty (hopefully that sticks0 but I'd still like to get my old one working. Not idea how I got stuck on the white page nor why this is happening at all but I want to try to prevent it in the future.
Click to expand...
Click to collapse
I had the same problem. I was in the bootloader screen with USB showing at the bottom. But when I tried to flash something I'd get a connection error. I just unplugged the usb from my pc and plugged it into a different usb slot, and walaa it started installing the htc drivers. Also in active sync, check the connection settings and make sure allow usb connections is checked.
Thank you for sharing, like very much

Categories

Resources