ROM's tested on Jade 110 (Orange UK HTC 3G) - Touch 3G ROM Development

Has anyone tested any of the ROM's featured here on a Orange UK Jade 110 device.
There are many here that look great, Thanks to all the Chef's. But I don't want to risk it if it has been tested yet.
I have extracted my Jade 110 ROM already and started cooking myself, but being a beginner I am very wary, just in case I mess it up.
Any feedback would be great.

speedflyzz said:
Has anyone tested any of the ROM's featured here on a Orange UK Jade 110 device.
There are many here that look great, Thanks to all the Chef's. But I don't want to risk it if it has been tested yet.
I have extracted my Jade 110 ROM already and started cooking myself, but being a beginner I am very wary, just in case I mess it up.
Any feedback would be great.
Click to expand...
Click to collapse
I also have a Jade 110.
I've flashed a couple of ROMs without any problem. For me, the best is the Tommy's WWE 3.9b ROM. It works like a charm!

Thanks rockado.
I'll give it a shot.

rockado said:
I also have a Jade 110.
I've flashed a couple of ROMs without any problem. For me, the best is the Tommy's WWE 3.9b ROM. It works like a charm!
Click to expand...
Click to collapse
I second that

hi rockado and djp76...
I have a Jade110 as well...
can you pls tell me how you flashed the new ROM?
when I try to install Hardspl it say that it is not suitable for my device...
have already left a post to another thread for Olipro and cmonex, but still no reply.
I am trying to get rid of the stupid Orange ROM.
any help will be appreciated....
pls give me detailed description of procedure, if different of that that Olipro has posted, which Hardspl etc.
I have seen Tommy's WWE 3.9b ROM on youtube...looks greta but I was also thinking of the new EU upgrade by HTC itself.
Thanks a lot.

HSPL for Jade 110 chek here
hi
well sir u need to search and u will get ur answers
those who cant do HSPL for Jade110 chek on the below post ironeagle has given u the answers hope it helps
good luck
http://forum.xda-developers.com/showpost.php?p=4060869&postcount=45

morpheassx said:
hi rockado and djp76...
I have a Jade110 as well...
can you pls tell me how you flashed the new ROM?
when I try to install Hardspl it say that it is not suitable for my device...
Click to expand...
Click to collapse
I had that as well and I think its due to the HARDSPL not knowing what a jade110 is, still on mine it said it wasnt for my device but did i want to continue and I clicked yes and all is well phone has hardspl on and after that id imagine any jade rom would be fine. Im using the pdaviet 6.5 one and it flashed fine first time once i had successfully applied the hardspl.http://forum.xda-developers.com/showthread.php?t=530620

I have installed HARDSPL to my device with no issues.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ur spl is wrong @speedflyzz
hi
as per what i see the spl no is wrong if u have done HSPL it should show as 2.32.olinex shoud be ur new spl no after HSPL
speedflyzz said:
I have installed HARDSPL to my device with no issues.
Click to expand...
Click to collapse

what haree said that screenshot you gave doesn't show 2.33 so that pic is still softspl not hardspl as it needs to be

Here is the HARD-SPL you need :
http://forum.xda-developers.com/attachment.php?attachmentid=180417&d=1240774863

Can anyone post the stock 1.70 radio for orange jade 110 - thanks

RUU for HTC Touch 3G by Orange UK (Jade 110?)
It seems I kept reading the same posts every link i click. I actually tried one a couple of times and it says ; 'INVALID ID' - phew ... wasted time!
Can someone please post it clearly (by numbers!)
1. Where (the proper link) do you get the best RUU for Jade 110 from?
2. the clear or plain instructions for stupid like me.
3. the cost or the risks involved.
cheers!

hi
first do a HSPL their a stiky in this forum for the same
once u have done this u can flash any rom u want
also see below post i have given a link in the post
goodluck
http://forum.xda-developers.com/showpost.php?p=4107015&postcount=6
ORANGE079 said:
It seems I kept reading the same posts every link i click. I actually tried one a couple of times and it says ; 'INVALID ID' - phew ... wasted time!
Can someone please post it clearly (by numbers!)
1. Where (the proper link) do you get the best RUU for Jade 110 from?
2. the clear or plain instructions for stupid like me.
3. the cost or the risks involved.
cheers!
Click to expand...
Click to collapse

im gonna go ahead and say all roms should work on a jade110 once hardSPL'D the hardwares identical. reminds me of the nk402 and the nokia 5110 lol

Related

Herald WM6 1238 17944.0.3.1 wwe by k0ster

Hello all!
I port new build for your device.
In attach you find a link to this ROM, but in archieve only nba-file.
This mean that this ROM only for experienced users.
pass: k0ster
Port from what device?
Great thanks. Could you give some info on the rom. What device was it ported from? installed apps etc.
Many thanks
Sean Giles UK said:
Great thanks. Could you give some info on the rom. What device was it ported from? installed apps etc.
Many thanks
Click to expand...
Click to collapse
Ported from trinity.
XIP-section, drivers and all applications from yours official wm6wwe-rom.
Added MS Office (Word, Excel, PowerPoint, OneNote, FaxView, ZipMobile)
Security OFF for install uncertifyed applications.
Enabled disconnect button and time in GPRS-bubble.
Screenshot from rus-version:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please put the Herald WM6 firmware by k0ster on rapidshare.de
nice release k0ster, thx for the hard work. Took me a while but I guess now I guess I can finally start cooking from a clean ROM.
CHEERS
btw its CE OS 5.2.1236
hi,
i have some questions...
the first is a very basic question: what means WWE ? (multilingual?)
the second is connected: is this rom in german?
my xda terra has already CE OS 5.2.1236 but the built 17741.0.2.1 ... is an update recommended?
Does the romupdate imply a radioupdate? i have already the higher version 02.85.90 ...
Thanks in adavance
wiedsche said:
hi,
i have some questions...
the first is a very basic question: what means WWE ? (multilingual?)
the second is connected: is this rom in german?
my xda terra has already CE OS 5.2.1236 but the built 17741.0.2.1 ... is an update recommended?
Does the romupdate imply a radioupdate? i have already the higher version 02.85.90 ...
Thanks in adavance
Click to expand...
Click to collapse
WWE - world wide english
17944.0.3.1 - the latest build from Microsoft dumped from Trinity
This ROMupdate contain only OS, not IPL,SPL,Radio,ExtROM,Splash.
This rom - ENGLISH.
neptune said:
nice release k0ster, thx for the hard work. Took me a while but I guess now I guess I can finally start cooking from a clean ROM.
CHEERS
btw its CE OS 5.2.1236
Click to expand...
Click to collapse
Ouch.
I'm sorry this is really 1236-core.
This is because i dont have Herald and haven`t possibility to check workability of this ROM.
Can this be flashed using Asergs methods? I only ask because most roms I have are OS.nb but this file ends in .nba
Hi guys.Its great to be here. k0ster thanks for the work. I got the nba file. Now the problem is how i am going to flash this file to my pda? Do i need to run a windows application. Because i just copy the nba file to my device and its not running. Also how i am going to backup my original rom? ın the case of failure how i am going to load the original rom. Lots of quesitions from a new bie Anyway thanks for help
I have renamed it to OS.nb, and used the same tool as PDAVIET has, but after 20 minutes it is still at CopyFileToTFFS(OS.nb:0 , 0, 04400000), is there an solution for this? My PDA is still on now, so i proberly can rollback to a other version, but i want this clean version of windows mobile, not all the crap in other ROMS.
Rename?!
uxsebas said:
I have renamed it to OS.nb, and used the same tool as PDAVIET [...]
Click to expand...
Click to collapse
may I quote K0ster here:
k0ster said:
In attach you find a link to this ROM, but in archieve only nba-file.
This mean that this ROM only for experienced users.
Click to expand...
Click to collapse
Obviously you can't just rename that file. Something else has to be done here.
Monarch73 said:
Obviously you can't just rename that file. Something else has to be done here.
Click to expand...
Click to collapse
It worked, after 50 minutes it still didn't finished, so i decided to plug of the usb cable and do a hard reset (my pda was frozen), after that i got the bootscreen of k0ster's ROM! It works perfectly, only some minor things i don't understand:
I cannot use the ReTOUCH dialer again, if i install it and restart my pda, i don't get the TOUCH dialer, but only empty images. On the PDA VIET ROM it worked. Anybody idea why this is hapening?
To k0ster: Can you make some changes in this ROM or second ROM? I would like to have standard in the rom that .cab don't get deleted (This is a registery setting). And the Dialer skin etc is working.
Thanks!
ROM not finished?
uxsebas said:
It worked, after 50 minutes it still didn't finished, so i decided to plug of the usb cable and do a hard reset (my pda was frozen), after that i got the bootscreen of k0ster's ROM!
Click to expand...
Click to collapse
Maybe the flashingprocess wasn't finished and you now run your PDA from a "half-baked" flashmemory ...
I'd recover it by applying a WM5 RUU and try to reflash again.
Monarch73 said:
Maybe the flashingprocess wasn't finished and you now run your PDA from a "half-baked" flashmemory ...
I'd recover it by applying a WM5 RUU and try to reflash again.
Click to expand...
Click to collapse
Just a word of caution, anyone upgrading to this rom or any cooked WM6 rom from another wm6 rom should downgrade to a WM5 otherwise you will experience a wide range of problems.
cheers
ROM is okay?
It seems like the rom is okay, but my phone is CID locked so i cannot roll back to Windows Mobile 5 en then upgrade to Windows Mobile 6. This should be working fine (ive upgraded before). Does anyone know a program to customize the rom?
I have the T-mobile wing. Do I need to CID unlock it first before upgrading to this rom.
and MOST importanty, how big is the page pool size?
marscandybars said:
I have the T-mobile wing. Do I need to CID unlock it first before upgrading to this rom.
and MOST importanty, how big is the page pool size?
Click to expand...
Click to collapse
CID unlock is not required if you upgrade using ASerg's method for flashing. Check out the txt file in the attached zip archive, and if you follow EVERY step(including flashing from Guest mode) it should flash without porblems.
AFAIK the pagepool on this ROM was C0 (which is 12MB) but I could be mistaken. Regardless of the PP size it is not that difficult to alter and would be glad to assist you if you are having troubles with Paul's guide at Modaco.
Hi.
I think i'm not a: "experienced user" (sorry). But i (as almost every one) want to upgrade my Herald to new ROM, so can You tell me how Upgrade with your .nba file?
freemanvn said:
Hi.
I think i'm not a: "experienced user" (sorry). But i (as almost every one) want to upgrade my Herald to new ROM, so can You tell me how Upgrade with your .nba file?
Click to expand...
Click to collapse
You should really search the forum for that one!! explained many many times!

HTC P3600i flashing bounty - $150 so far - DONATE NOW! :D

hello all
just thought i would take some initiative here to get things rolling... flashing for the P3600i has been something we haven't seen for a long time...
i am aware some people on here like xanda and others have been working on and off with this... well i thought it would be good to give people an incentive
if someone is going to spend time and effort on this, they should be rewarded to show our appreciation so i hope i can get the ball rolling here, i'm happy to give US$50 (paypal or whatever) to anyone that can come across with a breakthrough
so from what i understand we can use the same ROMs as the trinity, we only need a hacked bootloader!
and hopefully other P3600i users can contribute too! the more money, the more chances we have that someone might be able to help us out! so be generous and give, even $10 can add up if enough people donate, and then one day (hopefully) we can find a way to flash our phones
cheers,
jon
Count me in for $20
I would really like to get WM6.1 onto my P3600i.
p3600i sold
Really dying to get wm6.1 in English. Count me in for $30.
How xanda do the upgrade? what is the diffrence?
http://www.xanda.org/index.php?page=flashing-rom-or-upgrade-guide
Its an update to...
gallevy said:
How xanda do the upgrade? what is the diffrence?
http://www.xanda.org/index.php?page=flashing-rom-or-upgrade-guide
Its an update to...
Click to expand...
Click to collapse
I am not real sure what xanda update is, I am really interested in being able to Flash to WM6.1 cooked ROM's.
There is no point in me flashing WM6 as the standard HTC Rom with my current add-ons gets by.
Surely there are more people out there with P3600i that want to run the latest ROM's.
I have p3600i too. and i want wm6.1... but my point is that if xanda has update rom, He can do wm6.1.
gallevy said:
I have p3600i too. and i want wm6.1... but my point is that if xanda has update rom, He can do wm6.1.
Click to expand...
Click to collapse
I am pretty usre that IF xanda was able to flash a P3600i with WM6.1 then he would be telling everyone.....and so far that hasn't happened.
Actually...having read the comments on the thread about how to do it, I don;t think anyone has flashed anything with that system....apart from xanda.
Andych said:
I am pretty usre that IF xanda was able to flash a P3600i with WM6.1 then he would be telling everyone.....and so far that hasn't happened.
Actually...having read the comments on the thread about how to do it, I don;t think anyone has flashed anything with that system....apart from xanda.
Click to expand...
Click to collapse
does anybody appear there is a pic show his SPL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It mean his p3600i is SSPL? or it just a p3600 with oilpor sspl?
poggiami said:
does anybody appear there is a pic show his SPL
It mean his p3600i is SSPL? or it just a p3600 with oilpor sspl?
Click to expand...
Click to collapse
and I saw some P3600i it can see the HTC brand on the left of the headphones
but the XANDA`s pic did found the brand on his device?
what it mean? i think someone would know
i don't know what he's done, but it's not something that will let us flash ROMs
on his site he says he will finish his exams and stuff, and then get working on this
so donate some money to give him an incentive to work hard on this! (or anyone else who can help work this out)
Seems no-one is too interested in our problem.
There must be someone out there who knows what they are doing who is willing to give it a shot.
Someone try to put p3600 cocked rom with the xanda ROM Updater Utility?
de de dee... any guinea pigs? I've got an SPL waiting here.
I'm interested. But before that, may I ask whether it will brick the P3600i ? I'm asking because it's my main phone, so I can't afford to lose it. :{
Olipro said:
de de dee... any guinea pigs? I've got an SPL waiting here.
Click to expand...
Click to collapse
HI Olipro
Lets give it a try. PM me all the info and I will see what we can do.
*eagerly awaits results*
Olipro said:
de de dee... any guinea pigs? I've got an SPL waiting here.
Click to expand...
Click to collapse
Olipro man! wait u so long time post it and we try to do then flash 6.1ROMs
Olipro said:
de de dee... any guinea pigs? I've got an SPL waiting here.
Click to expand...
Click to collapse
Can you also PM me the info and the SPL so I can give it a go. Sure hope this will work. Waited so long for this.
interesting

kais 130 help

hi can the kaiser unlocker v1.0 unlock kaiser130 with spl-1.56.000 and cpld-8 thx in advance
yes...........
XtreMe_G said:
yes...........
Click to expand...
Click to collapse
*watches tumbleweed roll past in an awkward silence*
owned
hi can some one show me how to install hardspl on my kais 130 before proceeding to unlock the phone thx in advance
zongogsm said:
hi can some one show me how to install hardspl on my kais 130 before proceeding to unlock the phone thx in advance
Click to expand...
Click to collapse
Start reading here:
http://forum.xda-developers.com/showthread.php?t=369282
The thread your after is Hard SPL v1.
http://forum.xda-developers.com/showthread.php?t=334679
Ta
Dave
thx for the quick reply but how do i know that my kais 130 has wm.6 or wm6.1 thx in advance
From other thread
zongogsm said:
thx for the quick reply but how do i know that my kais 130 has wm.6 or wm6.1 thx in advance
Click to expand...
Click to collapse
You should know what OS your phone has
But if not, look in Start, Settings, System, About.
Ta
Dave
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For future reference, please don't create useless threads. It is quite frowned upon and unless you have flame retardant underwear, your bottom end might end up a little warm by the time some of the members here get finished.
P1Tater said:
For future reference, please don't create useless threads. It is quite frowned upon and unless you have flame retardant underwear, your bottom end might end up a little warm by the time some of the members here get finished.
Click to expand...
Click to collapse
You've gone soft man. They Make you a mod and now you seem nicer.... I don't like it! I may just have to drop your phone in Synthetic Motor Oil.
zongogsm said:
hi can some one show me how to install hardspl on my kais 130 before proceeding to unlock the phone thx in advance
Click to expand...
Click to collapse
No. Nobody here knows how to do that, my friend.
kais 130 please help
i was trying to install hardsplv.1 on my kais 130 and i get this error 202, i ve try over and over again still the same result any solution to this problem thx in advance
zongogsm said:
i was trying to install hardsplv.1 on my kais 130 and i get this error 202, i ve try over and over again still the same result any solution to this problem thx in advance
Click to expand...
Click to collapse
Please post in the HardSPL v1 thread and someone might help you.
@Mods Close this
Dave
@ the OP
I let one redundant thread pass, then trying to be nice, I let the second redundant thread pass. Now, you've created a third. Enough is enough.
Now, I have merged the 3, yes I can't even believe it, redundant threads in to one. This makes it much easier to CLOSE THEM.
Consider this your official warning. Do not create a thread, then when you don't get an answer, create another thread.
Have you ever considered that if you posted in the CORRECT thread, that you might get the answer you're so incorrectly looking for?
Thread closed. All 3 of them.
kais 130 please help
hi i know you are fed up with me but pls be patience with us new bees and my problem is am unlocking kais 130 and am on step 2 number( 8) when i run kaiser-simlocker.exe on my pc the dos software comes and disapear i ve try on a different pc but still the same problem plsssssssssssssssssss i need your help to solve this problem thx in advance
are you referring to use instructions:
(originally by jockyw2001)
8a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
8b. On your PC go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
8c. right-click activeync icon and check "Allow USB connections" from Connection Settings
i got them from this post and assume you are using this unlocker:
http://forum.xda-developers.com/showthread.php?t=361039
now i don't understand how you can not complete the process IF you followed the instructions properly, maybe elaborate a bit on how you started. and secondly to point you in a easier direction: who is your carrier? i ask because most carriers will easily provide you with the sim unlock code for your device.
I have att and they gave me mine after 2 days of starting service (not that i needed it ).
p.s. did you remember this step: Make sure you installed HardSPL as follows
kais130plselp
10. Download the original radio from http://forum.xda-developers.com/showthread.php?t=349375 to the "step3" directory on
your PC and flash it with KaiserCustomRUU.exe i ve downloaded the original radio version to step 3 folder and now i dont know which one to flash it with,should i flash only the kaiserRadio only or the kaiserCustormRUU which is in the directory already anyway thx for the quick reply
zongogsm said:
10. Download the original radio from http://forum.xda-developers.com/showthread.php?t=349375 to the "step3" directory on
your PC and flash it with KaiserCustomRUU.exe i ve downloaded the original radio version to step 3 folder and now i dont know which one to flash it with,should i flash only the kaiserRadio only or the kaiserCustormRUU which is in the directory already anyway thx for the quick reply
Click to expand...
Click to collapse
you can't flash radio without kasiercustomruu that is the program that starts the process. Your radio file will end in .nb and you paste that into the step 3 directory so now you have the kaisercustomruu and the radio nbh. Sync device to pc and click on the kasiercustomruu and follow the prompts.
Ooh Busted OP. P1Tater Told you NOT to create a new thread. Disobeying a Mod. The Nerve.
http://forum.xda-developers.com/showpost.php?p=2288325&postcount=14
This question would have been PERFECT for the KAISER UNLOCKING THREAD! Which you know where that is because you refered to the steps IN SAID THREAD!
You were already warned my another Mod about 3 threads exactly like this.
Now you get a 1 week ban. Use that time to read the forum (especially the links in my signature).

TyTN II Hangs Randomly.. Please Help!

My TyTN II started acting weird within 2 days of purchase. It just "hangs" for 5-10 seconds every now and then. It's very irritating and I have to wait for it to get OK. This problem occurs at random many times a day.
Nothing works... Neither the screen nor any of the buttons when this happens. I have the stock Windows Mobile 6.1 ROM with not many applications installed: Esmertec JBed, Google Maps, SPB Insight Trial and that's about it I guess.
Please help!
You must change the SPL.
Go to the right thread and read how to install SPLs; you must find the compatible SPL with your radio...
Oh my god... What does that mean? And I'm using the ROM that came with the phone... What can be wrong with it??
what the shop have said about that?
if the warranty is on yet, you can bring the phone to the shop. So you don't risk to ruin it...
Well... The shop really has no idea about what is wrong. Will have to take it to the service centre if required. A quick google search has revealed that the WM 6.1 ROM has problems. People have noticed that it gets fixed after they downgrade to a WM 6.0 ROM. I guess that is the only option left. Thanks anyways
essetierre said:
You must change the SPL.
Go to the right thread and read how to install SPLs; you must find the compatible SPL with your radio...
Click to expand...
Click to collapse
LOL
He said he had the stock rom and that it was like that from the factory, so if it came like that then you shouldn't need to flash the SPL...
The spl upgrading/downgrading is for the cooked roms. (well for the people that had 6.0 orginally and have flashed to a cooked rom.. I think) and since this guys doesn't have a cooked rom and it's orginal then it shouldn't need the SPL upgraded.. It was a fix for the non legit roms.
So, here is what you need to do.. Backup your contacts and what not and then do a hard reset. Test the phone like that until you either have the problem again or feel that the problem is resolved. If it's resolved then slowly reinstall your programs. If it's still messed up report back to us or send it in for service.
I really don't think it's an spl problem.
Anyone with more then 4 post think otherwise?
ChumleyEX said:
LOL
I really don't think it's an spl problem.
Anyone with more then 4 post think otherwise?
Click to expand...
Click to collapse
Have to agree
These boody 4 post know it allz JK
No flames just a healthy shot of water....
I clicked your sig for the answer but all it did was ask more questions...?
I'm not trying to bash the guy but I did want a more seasoned persons view of things. lol and I was sure it was going to be you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ChumleyEX said:
I'm not trying to bash the guy but I did want a more seasoned persons view of things. lol and I was sure it was going to be you.
Click to expand...
Click to collapse
Same here no bashin, SPL on stocks shouln't make a difference as when you get your new device it doesn't hang...
Another thing worth doing is keeping up with cleaning, using clear temp, i use memmaid too.
Oh i just click on you and look @ last post always guaranteed to make me laugh JK "i'm not really stalking you"
Hi,
I am in (almost) the same situation and I would like to downgrade to WM6.0. Can somebody tell me where can I find the oficial WM6.0 (german) version and how can I make that downgrade (is the same procedure as upgrading?) ?
Thanks a lot in advance!
Downgrade procedure
Having recently downgraded to a WM 6.0 HTC ROM from a WM 6.1 HTC ROM I can list all the steps. You need to install HardSPL 1.0, then Run the KaiserRUU.exe for the WM 6.0 ROM which can be found at the botton section of this wiki page (although no German version is there - for that there is the reconstructed ROMs thread here or better still contact HTC and ask them to do it for you under warranty if it's behaving this way with no other software installed). This part is just like running the upgrade program. After that's done, you can change the hardSPL back to a HTC SPL but this last step isn't essential unless you'll be returning the device under warranty. The WM 6.0 setup in my sig gives good, reliable performance with little evidence of freezing and especially good GPS performance.
I know what the O/P is referring to because my Kaiser under the HTC WM 6.1 ROM used to exhibit this pausing (among it's many other problems), reverting to WM 6.0 seems to have solved that. As there is no German WM 6.0 ROM listed in the wiki and only a reconstructed ROM, I strongly suggest Conrad-007 uses the HTC warranty on this device (after testing it with no installed software first as ChumleyEX suggested), that's what it's there for and that's how I had my Kaiser reverted to WM 6.0 the first time (even though HTC were willing to provide me with a link to download the ROM itself). The fact I've had to revert my ROM back to WM 6.0 twice now should tell you something about what I think of the HTC WM 6.1 ROMs, especially as far as GPS performance goes. Of course the standard stuff of reading up all the sticky posts and ROM flashing related wiki to make sure you know what you're doing first apply.

[ROM]Leo 1.5 T-MOBILE Test & Stock ROMS

BEFORE DOWNLOADING A FILE, PLEASE CONSIDER A SMALL DONATION TO KEEP THE HOST ONLINE!
http://forum.xda-developers.com/donatetome.php?u=330233
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will upload all the versions here.
***IMPORTANT*** Only flash 2.10.50.0xx radios where "50" on TMOUS. If that number is "51" it will brick your device.
Note: any radio version that is 2.04.50.xx or 2.05.50.xx will brick a TMOUS HD2, these were test radios for earlier HD2's treat them like .51 radios for TMOUS. (the first download has such radio rom)
This warning has been added since the roms below contain radio roms also.
2.01
RUU_Leo_1_5_TMOUS_2.01.531.7_Radio_Signed_15.28.50.07U_2.05.50.11_3_Test.zip (Not for TMOUS)
2.02 *MFG SPL!!!
RUU_Leo_1_5_TMOUS_2.02.531.MASD_S_Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
2.03 *MFG SPL!!!
https://rs854tl5.rapidshare.com/#!d...181753|R~CF33EAED64CC414EC03517D5D1E18534|0|0
2.05 *No Stock SPL!!!
RUU_Leo_1_5_TMOUS_2.05.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip
2.07
RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed_15.33.50.07U_2.07.50.27_2_Test.zip
2.09
RUU_Leo_1_5_TMOUS_2.09.531.4_Radio_Signed_15.34.50.07U_2.08.50.08_2_Test.zip
2.10.0
http://www.shipped-roms.com/shipped...dio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
2.10.1 *No Stock SPL!!!
RUU_Leo_1_5_TMOUS_2.10.531.1_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.zip
2.11
RUU_Leo_1_5_TMOUS_2.11.531.T1_Radio_Signed_15.36.50.07U_2.09.50.29_2_Test.zip
2.13
http://shipped-roms.com/download.ph...o_15.39.50.07U_2.10.50.26_Signed_LEO_Ship.exe
3.14.0
https://rs807l3.rapidshare.com/#!do...218942|R~574267DAED54D41924439DCFA736B9B2|0|0
http://hotfile.com/dl/71090389/768b...15.42.50.09U_2.14.50.04_LEO_1.5_Ship.exe.html
3.14.1
http://www.filefactory.com/file/b3e...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
http://shipped-roms.com/download.ph...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
Reserved, you may never know when you need it
sooo,.. all these are the shipped stock ROMs? why so many? really that many releases in a week? sorry if such a noon question.
K... i got mine new last saturday. 3-27-10. getting ready to do the flashy flash, but want a way back if needed. thanks.
These were all ROM that were used on the HD2 while it was in development. 2.10.1 is the actual shipping ROM. That seems to be the one we can't get.
nightryder21 said:
These were all ROM that were used on the HD2 while it was in development. 2.10.1 is the actual shipping ROM. That seems to be the one we can't get.
Click to expand...
Click to collapse
We can get them, if someone is willing to drop the rom.... Anyone with a TMOUS HD2 willing to take the time to drop te rom... PM ME!
Sticky icky, very useful!
Digital Outcast said:
Sticky icky, very useful!
Click to expand...
Click to collapse
Thank you bro!
I just sent PM, I am definitely willing to dump rom from my stock TMOUS HD2.
i get it. my bad. man, getting my hands on this rom will definitely give the freedom I think we all want to be able to safely flash.
thanks for this thread dude, even though there's like four "stock hd2 ROM" threads in this section, I think with someone willing to walk through someone else through the steps of a ROM dump, is so AWSOME. thank-you guys.
holylove02 said:
i get it. my bad. man, getting my hands on this rom will definitely give the freedom I think we all want to be able to safely flash.
thanks for this thread dude, even though there's like four "stock hd2 ROM" threads in this section, I think with someone willing to walk through someone else through the steps of a ROM dump, is so AWSOME. thank-you guys.
Click to expand...
Click to collapse
2 People here on XDA are trying to dump it, more info will follow!
xmoo- Just need a walk through on how to dump my TmoUS rom. Also, I am looking to increase the intensity of the vibe, do you know of any cooked roms that would include this feature? Already flashed hspl. Thanks
xmoo said:
We can get them, if someone is willing to drop the rom.... Anyone with a TMOUS HD2 willing to take the time to drop te rom... PM ME!
Click to expand...
Click to collapse
Thanks for the roms. So the shipped rom puts the tmo hd2 exactly as it would have been had you bought it on the 24th including all cabs etc?
So if I just use the hspl2 unlocker (2.08) and go use say the tmobile hd2 energy rom but need to return it for service I can use the shipped rom just to be official and have it restored to the first rom?
any update on this. if not and you dont have the rom i will dump it off my other HD2 tmobile this saturday.
xmoo said:
2 People here on XDA are trying to dump it, more info will follow!
Click to expand...
Click to collapse
So I tried twice. The first time just went slow, after more than 2 hours my wife wanted her phone back. The second time I rebooted the phone, killed the data connection and started the dump process, it started a lot faster but after about 1 hour it slowed way down and I couldn't tell if it was hung up or not. I let it run another 1/2 hour and it didn't appear to have made any more progress.
Ideas?
stranger- Can you give me a brief on what app, program you are using to dump your rom. Also, I would like to post my rom as it is stock with a few tweaks which include: Wifi router, reset button, mp3 trimmer, and SRS WOW audio booster. I already flashed HSPL2. Thanks
I've been trying to find a way to dump my ROM for days now. I have an unmodified TMOUS HD2 ready to dump. (Well, only mod is i put in the 6 row start menu cab, but I can uninstall that easy enough.)
When I asked for a way to dump my stock TmoUS rom, I received a reply with a link to this forum. I am not sure how to use this program but maybe one of you can. Good Luck
forum link: http://forum.xda-developers.com/showthread.php?t=581715
Willing to Dump TMOUS ROM
I just picked up my HD2 a few minutes ago, I haven't even powered it on, but I'm willing to dump a ROM. I've been flashing for years, but I'm not familiar with the dumping process.
Dumping
Have an hd2...still sorting out the process of dumping with no kitchen system.
havik, tiger- Two post up I included a link to a kitchen program that is compatible with the TmoUS HD2. I have never done any cooking and am totally new to WinMo so if your able to dump your stock rom please post it here.

Categories

Resources