Everytime I plug my phone into a USB connection I used to be able to to select 'USB flash drive' - 'activesync' or ' modem'.
Today I tried modem and it didn't work, unplugged it and replugged it to go back to a flash drive and it went straight to modem.
Now I cannot get it to connect as a USB flash drive!
Any ideas?
Check your USB to PC settings under the Connection Settings to see if you have the "Ask me first about USB connection type..." unchecked. If it's unchecked, then recheck it. Can't think of anything other than that..
Thanks for the suggestion, tried every combination of settings I could in that menu and still just goes straight to internet connection sharing modem.
Tried it in a different PC, same thing.
riverer said:
Thanks for the suggestion, tried every combination of settings I could in that menu and still just goes straight to internet connection sharing modem.
Tried it in a different PC, same thing.
Click to expand...
Click to collapse
You have to do in your PPC not PC, go to USB to PC in setting menu of PPC and check there.
Ciao, Andrea
Related
I have been working on setting up Internet Sharing on my laptop(s) for a few days now and have searched and read through the forums to no avail. I need the USB Modem Driver for Win2K and XP (SP2 if it matters). I put the set up CD in and searched it, but it list drivers only for Vista (32 and 64 bit).
Does anyone know a solution for this or know how to get hold of these drivers?
Thanks for your help.
Bobby
Can you not use Internet Connection Sharing?
If I knew how....
I could most likely use ICS if I knew how. When I plug the phone into the laptop it displays the found new hardware wizard, but no compatible driver for it to use. I have done a search on google, here on the forums and the MS website and am not able to locate the HTC USB Driver that is called for in the wireless modem section of the users guide.
I have seen some information about using ICS, but nothing to tell me how it works or what I need to do to get it to work. Is it a matter of installing Active Sync onto the laptops I want to use, then kick off ICS to access the web from the laptop?
Thanks,
Bobby
i too have been desperately searching for this. I can't seem to find anything. This laptop is my primary computer so it already has ActiveSync and the Tilt setup, but it won't recognize it once I switch the phone into "wireless modem" mode (where it deactivates the activesync functions)
Is this what your looking for?
Internet Sharing
2001bmw330xi said:
i too have been desperately searching for this. I can't seem to find anything. This laptop is my primary computer so it already has ActiveSync and the Tilt setup, but it won't recognize it once I switch the phone into "wireless modem" mode (where it deactivates the activesync functions)
Click to expand...
Click to collapse
I'm sure this has already been covered somewhere... but, did you search for the standard Internet Sharing app that was supposed to be on WM6 ROMS by default? I bought my Tilt 2 weeks ago, am on the stock ROM, and found the app hidden in \Windows and it works fine here. If you find it there just create a shortcut and place it in \Start\Programs or wherever you want.
ercave1 said:
I'm sure this has already been covered somewhere... but, did you search for the standard Internet Sharing app that was supposed to be on WM6 ROMS by default? I bought my Tilt 2 weeks ago, am on the stock ROM, and found the app hidden in \Windows and it works fine here. If you find it there just create a shortcut and place it in \Start\Programs or wherever you want.
Click to expand...
Click to collapse
i tried to use the internet connection share - but it wouldn't work either. it kept showing me the bubble (starting GPRS, Edge, 3G connection) and then eventually said "the remote party has ended the connection"
EDIT: never mind, got it to work! Had to change "Network Connection:" from "AT&T ISP" to "MEdia Net".
what am I missing
So to get this to work all that needs to be done.
connect phone to laptop (regardless of O/S Version) via USB cable
start ICS and you are off and running?
No driver install is needed on the laptop (including no activesync install needed), is that correct?
Thanks,
Bobby
Instruction for setting up Internet Connection Sharing
I was able to locate instructions on how to set this up on the Tilt (located in the HTC Tytn II users manual). I have included the section referring to this below so others who may want to know how can get it up and going.
Thanks,
Bobby
========================================================
10.9 Using Your Device as a Modem
(Internet Sharing)
Internet Sharing connects your PC or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth.
Follow the procedure in this section to set up your device as a USB modem. To learn how to set up your device as a Bluetooth modem, see “Use the device as a Bluetooth modem” in this chapter.
Notes • Make sure your device has a SIM card installed, and your device has a GPRS or phone dial-up modem connection. If your device has not been set up with a data connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
• If you want to use a USB cable connection, you must first install Windows Mobile Device Center or Microsoft ActiveSync version 4.5 or later on the computer.
• Before using Internet Sharing, disconnect from Windows Mobile Device Center or ActiveSync on your computer.
• On your computer, run 3gnetopt.exe from the Application Disc to optimize the connection speed between your device and computer.
To set up your device as a USB modem
1. On your device, tap Start > Programs > Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
4. Plug in the USB cable between your device and the computer.
5. Tap Connect.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.
hope this helps someone
Hey guys, I usually try and post whenever I finally figure something out...I was getting the error message: Cannot Connect "the remote party has ended the connection" and from some of what I was reading it was because I was trying to use internet sharing with a mediamax $20 plan and I wouldn't be able to do that any longer because of something embedded in WM6 which told AT&T that I was tethering. Well my laptop is connected right now via usb through internet sharing on WM6 on my 8925/tilt and I have the $20 plan. I just checked my speeds and I am at 1485kb/s upload and 339kb/s (is that good?) seems much faster that wireless modem connection I used to use on 8525 w/ wm5. Internet sharing is the way to go. I am not exactly sure what fixed my problem--I did a few things and finally stopped getting the cannot connect: remote party...error. I first erased the user name and password under the connection settings ([email protected]) and left both fields blank. That didn't fix it like it did for some others that I read about so I did a power down and power back up (not sure if this is different than a reset with the stylus in the hole). Still wasn't fixed...On the internet sharing screen the second box under network connection I changed from "AT&T isp GPPRS" to "media net" and then connected and it worked. I don't think I need the username and password for anything because I can still browse on the phone without them--not sure why they were there. I haven't checked to see if I can internet share with the password and username reinserted...Hope that helps someone else out...don't give up it is possible to internet share through mediamax $20 with WM6...
Quick Fix For Those who couldn't figure it out
On your AT&T Tilt or (Possibly any Windows Mobile 6 Device)
Navigate to your "file explorer"
Step 1 (Locate the File Explorer) Not Internet Explorer
Start > Programs > Tools > File Explorer
(Possibly) Start > Programs > File Explorer
(Possibly) Start > File Explorer
Step 2 (Using File Explorer navigate to "My Device")
Then Locate the "Windows" Folder
Scroll all the way down to InternetSharing (Press the letter "I" to get you there faster)
Have your the device plugged into your computer and run that application and make sure these 2 options are selected:
PC Connection: USB
Network Connection: Media Net
Hit Connect
If it doesn't connect for you right away or gives an error message try this:
Unplug your phone from the computer
On the internet sharing application press Connect and immediately connect the USB cable.
Hope this works for others.
Have a data plan with at&t or you might be seeing some rather large charges on your internet bill.
Sane said:
Is this what your looking for?
Click to expand...
Click to collapse
Is that a USB RNDIS driver? As in no need for activesync?
I know it is possible, as I used usb-rndis-lite to use my kaiser as a modem on linux, but I never found anything that allowed me to share the conn via usb without activesync.
FYI, for those who do not have activesync for whatever reason, WMWiFiRouter will let you do it via WiFi.
The easiest way.
Just install the latest activesync.
If you don't want it syncing, no problem. Just right click on the activesync icon in your task bar, go to connection settings and uncheck allow USB connections. You'll still be able to use Internet Sharing but it won't try to sync every time.
After you have activesync on your computer you'll be able to use the Internet Sharing all you want. Just be sure you press connect on your device before you plug the usb cable in. Otherwise sometimes it won't connect.
Don't abuse it, or most likely your provider will slam you with tethering charges if it's very obvious you're using it. Assuming you don't have a tethering plan, of course.
Sometimes (eg on a corp laptop) you are not allowed to install activesync for example, but a driver would be OK - so it's always good to have alternatives.
Not so much of an issue now as WMWifiRouter is a more universal solution, but not all machines have wifi, so an RNDIS driver for USB would still be nice to have handy.
Been on T-Mobile web'n'walk (the basic one, not the tethered one) for over 6 months now, I use tethered mode on a daily basis, not had any complaints or charges yet. Mind you, I don't really hammer it, just web pages, ppc app downloads, a bit of youtube maybe. They could probably tell by looking at the browser IDs, but I doubt I am top of their list.
Even if they do hit me with the charge for the "Pro" version that allows tethering, it's only another £5 a month and I am on the lowest voice tariff anyway as I have an HTC original and not a subsidised phone.
WOW!!!! I can't believe this thread went as long as it did. Grats to DuMnUt101 and Evilc.. I wish I had my usb cable here with me so I could test the active sync part. Did this guy ever get it working?
The driver attached previously is not a ICS driver but a modem driver - you need to supply APN, username and password. Could possibly work, but when I run the EXE, it does not detect the phone as a modem.
bwc302 said:
I have been working on setting up Internet Sharing on my laptop(s) for a few days now and have searched and read through the forums to no avail. I need the USB Modem Driver for Win2K and XP (SP2 if it matters). I put the set up CD in and searched it, but it list drivers only for Vista (32 and 64 bit).
Does anyone know a solution for this or know how to get hold of these drivers?
Thanks for your help.
Bobby
Click to expand...
Click to collapse
Hi,
If you want to use internet sharing from HTC Modem via USB you just have to activate that functionality on the phone and then connect the USB cable to your PC.
Your windows will ask for drivers if you dont have ActiveSync4.5 installed (XP/NT2000/NT2003).
If you have ActiveSync already installed (this will install usb modem drivers you need) then you should have no problem with drivers and will be ready to use your mobile's shared internet.
bwc302 said:
I have been working on setting up Internet Sharing on my laptop(s) for a few days now and have searched and read through the forums to no avail. I need the USB Modem Driver for Win2K and XP (SP2 if it matters). I put the set up CD in and searched it, but it list drivers only for Vista (32 and 64 bit).
Does anyone know a solution for this or know how to get hold of these drivers?
Thanks for your help.
Bobby
Click to expand...
Click to collapse
Hi,
If you just want to use internet shared by your phone on your PC, you just have to install ActiveSync4.5 (this will install the usb modem drivers required).
This will set you ready to use the mobile's internet on your PC.
After this you can always get the drivers using "Device Manager".
Hope this is the answer you wanted!
Double post from out of no where..
Nothing to see here.
Hi, I couldn't find it with a brief search, so if it was allready discussed, please point me the right direction...
The problem is when you connect your Diamond to USB, you will get 3 options (ActiveSync, Disk Drive and Internet Sharing) but immediately after that the USB connection popup appears which I usualy don't carre, but if I want to swith to Disk Drive Mode I have to hide it with the "Hide" button and if I miss... simply it is useless
It only apperas if ActiveSync was the previous setting and that I use a lot... so is there a way to hide that popup forever ? so that it will connect in the background and never show up... then It would be much easier to choose from those three options without the popup in the way
Settings -> Connections -> USB to PC and uncheck Ask about connection type when I connect. BTW, I think this is a ROM specific problem. I'm using the stock ROM and never saw that dialog.
pedmond said:
Settings -> Connections -> USB to PC and uncheck Ask about connection type when I connect. BTW, I think this is a ROM specific problem. I'm using the stock ROM and never saw that dialog.
Click to expand...
Click to collapse
But I want to be asked about connection type when I connect. I just want to get rid of the smaller USB connetion popup... And you're right, I didn't come up on the stock ROM
Go to Settings -> Connections -> USB to PC
Check "Enable advanced Network functionality"
I noticed that unchecking this option brings up this Popup...
schauol1 said:
Go to Settings -> Connections -> USB to PC
Check "Enable advanced Network functionality"
I noticed that unchecking this option brings up this Popup...
Click to expand...
Click to collapse
if I check it, then my Windows Mobile Device Center can't connect with Diamond
The real problem
The real problem here is that the device starts to connect right away when you plug in the USB, regardless of whether you select an option or not. It does not wait for you. Although it displays the selection dialog, but before you can choose from the options it has already started connecting. This happens in the background in case of Mass Storage / Mode modes, but brings up the Connecting to host popup if you have previously used ActiveSync mode.
When you finally change to another mode in the selection dialog, you in fact change the connection of an already active ActiveSync / Mass Storage / Modem connection. Thus the device must STOP the current operation, switch to another mode and RESTART the usb connection again - which often fails. Replugging the device usually helps, but it makes the whole approach pointless.
The correct way of operation would be not to connect before you select how you want your device to be used. It should WAIT until you select one of the options and then CONNECT.
I don't know if there is a way around this I need this dialog but hate that the device connects before I click on one of the options. On Nokia phones nothing happens until you choose. That is the correct way of doing it, not a nice dialog that fails every second time.
There is probably a simple fix for this so I'm going to ask. When I have my phone connected to my computer via USB i am unable to surf the net on my phone or get weather updates...however...i can still recieve calls and get and send text messages. Is there a way to make it so that web browsing and weather tab updates are still functional while the phone is connected to the computer?
I've wondered this also. In addition I usually get a #777 error, complaining about the lack of a data connection.
Go to "mobile device settings" in your Windows Mobile Device Center and check the box that says "Allow data connections on device when connected to PC."
any idea how to do this on activesync? what you mentioned is for vista
oh im sorry i didnt realise you didnt have vista. I think there should be similar settings in the active sync. Probably in connection settings :/
Activesync>Connection Settings. Check "Allow wireless connection on device when connected to the desktop"
just got it.
you connect your diamond to pc with activesync, open connection setting and change the "this computer connect to" to "automatic".
and you need to tick the box "allow USB connection" as well.
i used my d2 this weekend with my laptop but now i cannot choose between te 3 choices , only shared internet connects automaticly ?
i enabled ask me first in settings menu no help!
this is not uncommon, what i do when this happens is this,
plug in phone to pc and wait for it to recognize the phone with the "dunk" noise
manually launch internet connection sharing on the phone
click connect and wait for it to completely connect
click disconnect then close internet sharing
unplug phone, then plug it back in. you should now get the usbtopc pop again
I have a different problems with the selections. The sync runs straight away and then if you choose to share internet the sync stops. Afterwards I need to soft reset to get the sync working again.
This reply is using shared internet on my D2
this worked for me ! thanks
click connect and wait for it to completely connect
click disconnect then close internet sharing
unplug phone, then plug it back in
chch said:
I have a different problems with the selections. The sync runs straight away and then if you choose to share internet the sync stops. Afterwards I need to soft reset to get the sync working again.
This reply is using shared internet on my D2
Click to expand...
Click to collapse
not sure if it will work for you, but what worked for me (HTC touch pro, custom ROM PROven):
1. go to Settings on your HTC, Connections, USB-to-PC, select ActiveSync radiobutton, uncheck the "Ask me first about...." checkbox.
2. connect your phone using active sync.
3. disconnect (unplug)
4. go to that same settings again. Now select the other radiobutton (DiskDrive), AND check the "Ask me first..." checkbox.
When you now again connect your phone, it will (hopefully) ask what connection you want to make.
Otherwise, try changing the order of the above actions.
hope that helps.
For some reason I dont seem to be able to browse web via my mobile browser while device is connected to Activesync (USB cable)
I've checked Allow Wireless Connection and disabled high speed syncing in Conenctions USB>PC on my Xperia.
This affects email and internet data connections and apps. In internet explorer and IRIS I get a 403 error.
I have activesync as "Computer connects to Work Network"
When I disconnect from Activesync I can browse as normal.
Having gone through the usual suspects and done a search I can't seem to find anything that addresses this particular iteration of the 403 error so would gratefully accept any suggest
You don't need the "Allow Wireless Connection when connected to the desktop" ticked. (Unless you want to use WiFi on the X1 while plugged in via ActiveSync).
My ActiveSync "This computer connects to" is set to "The internet", not Work Internet.
Allow USB connections.
On the X1,
Got to Settings, Connections Tab, USB to PC.
Make sure ActiveSync (Sync with outlook) is selected, then make sure "Enable advanced network functionality" it ticked.
cheers for your reply Steve. (good collection of apps too)
These are all options I've tried already (think I've tried every combi) and I end up with the same result - as i get not data connection when i connect the USB. If I open IE or IRIS beforehand and then connect as soon as I browse a new page I get the 403.
I'm sure this didnt happen last time I tried to browse this way but have no idea what could have changed. I thought it could be a connection settings thing - IRIS has loads of options for connections and I've tried all of this, all unsuccessfully. IE doesn't appear to have any options.
Anyone know of any tweaks or reg fixes?
duplicate post
one other thing - if I go to conenction amanger and try to activate Data connection while conencted to activesync, I get sent to the Settings > Connections screen. Data connection will not activate.
I can't offer anymore help Don't know what's up with yours.
cheers anyway steve. gonna wager on a reinstall of activesync and also try on my home pc to see if this is any different.
I know GP can block using device as modem/internet sharing, but this would be different so who knows?
interestingly I've just discovered that I'm still receiving emails when this problem occurs. I wonder if something could be preventing http requests?
just to recap, this works when synced with my home PC, but when synced with my works PC I can't access http via 3g/hsdpa, nor through the PC. I can however receive emails.
As the attachment shows, the phone is connected to the HSDPA and Activesync via USB.
I've reinstalled Activesync on this PC, and experienced an intermittent connection following this - however following this short period of activity the connection halted again.