Database Develop

Strange Problem, I need some help please

Hello everyone,I have the Vanilla ROM. 1.4 I believe, what has happened is that I had a friend look at my blue angle because he was considering getting one himself, he went to my Mobile Shell application from SPB, activated the portrait view (took time to load and he did not know that) so he decided to press is like a lot!!
So it tried to do landscape/portrait mode a lot! so we rebooted the thing. Then another problem came that the phone locked itself, and when trying to unlock the phone nothing worked, (press the "*" again to unlock the phone) that did not work at all.
After spending a lot of time I fixed that, then the screen alignment/navigating with the D-Pad was all screwed up, I managed to get to the screen alignment program and fixed that. Now I have this serious problem.
The phone cannot connect to my service provider (Cingular). And here is the funny part... Hard Reset does not at all!! very strange. Using a backup file I had useing SPB backup that also did not work.
(also I tried draining the backup battery and that did not work as well, guess the volatile memory thing in WM5 worked).
Please someone help me in this problem as I cannot use my phone! :'(

Fixed
Sorry about the post, I have fixed it by doing
http://forum.xda-developers.com/showpost.php?p=1164331
worked perfectly, reset the phone easily and now restoreing with a backup.
But if anyone can please tell me why Power/Reset did not do a hard reboot?

Hard reset is not enough
I've flushed my phone about 50 times during last two weeks.
I think, that there are some cases, that same data or state of "things" can survive flashing and hard reset. At least using helmi_c or my ROM.
Simply test: flash any helmi rom, turn on wifi and/or set button lock to wake up only using power button and perform hard reset. State of lock button is not changed, wifi tries to connect to any access point. Even reflashing with the same rom is not enough.
I'm guessing only: I think, that there is small bug - reset procedure checks validity of any particular block (or blocks) of data and skips initialization of same data it if is looks valid.
Maybe you have got the same.

wm5 needing soft reset

Every time I change the battery on blueangel and start it up I find that the phone is off and that I have to soft reset to get it to work.
I installed wm5 quite a while back and have had this problem since the beginning. Is there a fix for this?

no, but is it so hard for you to perform soft reset ?
and one more question, how often you hange batteries every 5 minutes? (if i am correct i see why you are upset)

ridan: this is known problem: there is delay between RadioROM starting and initialisation of the device. There is only one fix: when device is booting for the first time, wait 5s (from the time you can see on the screen, that there is no information about radiorom version), then immediately make a soft reset, long before the device will finish booting: after this 2nd soft reset readio rom will boot and everything will work fine.
if you don't want to play like this, there is only one option (and there won't be other in the future): go back to WM2003.

xplode: It shouldn't really matter how often I change my battery as everyone who owns a BA knows that battery life is dependent on usage and can range from a couple of hours to a few days.
And it is not 'hard' to insert the stylus into the reset hole, but it is annoying to find that your phone has been off the whole day just because you forgot to wait 5secs and reset.
jakubd: I was going to change to a different rom, but as you say that its present on all wm5 roms I will ditch the idea. I may switch back to wm2k5 but I'm on the fence at the moment as to whether I will.
thanks for the reply jakubd.

Hard Reset not working?

Today I got my Kaiser back from repairs. I got my mainboard replaced because of connection issues. It came back with it's original 'software'.
After installing Hard-Spl (white screen edit) I successfully flashed "Dutty's Official WM6.1 5.2.19209 Release" to my Kaiser.
I wanted to Hard Reset my device using the soft-buttons and soft-reset method, but it seems to be broken (?). I managed it in the past (before flashing and repairs) but for some reason it doesn't work anymore. Soft-resets and Bootloader mode still work.
Anyone got an idea?
Thanks in advance
P.S.: In the meantime I hard-resetted my device by going to Settings => System => Clear Storage

Dr. Strangelove said:
Today I got my Kaiser back from repairs. I got my mainboard replaced because of connection issues. It came back with it's original 'software'.
After installing Hard-Spl (white screen edit) I successfully flashed "Dutty's Official WM6.1 5.2.19209 Release" to my Kaiser.
I wanted to Hard Reset my device using the soft-buttons and soft-reset method, but it seems to be broken (?). I managed it in the past (before flashing and repairs) but for some reason it doesn't work anymore. Soft-resets and Bootloader mode still work.
Anyone got an idea?
Thanks in advance
P.S.: In the meantime I hard-resetted my device by going to Settings => System => Clear Storage
Click to expand...
Click to collapse
Few Tricks, Make sure you are not plugged in USB. Make sure you are not "fat fingering it." Some people use chopsticks to be sure. And Hold it for long after the Screen goes Black.

Believe me, I've already tried the things you said.
Although I successfully mananged in the past to hard reset my phone, I checked the threads and the following vid:
How To Hard Reset Kaiser:
http://www.youtube.com/watch?v=fZPzT_L2FZQ
Usually I am the problem, but this time I can't figure out what I'm doing wrong.

Just wondering:
Which part of the Phone (ROM) is in control of the Hard Reset part? (e.g.: Bootloader, Radio Rom, Regular Rom,...)

Use "Clear Storage". It does the same thing.
Also, JM is most likely correct. It is most likely an issue of how you are pushing the buttons. Make sure you hold only ythe soft keys first, using your fingernails, then push the reset tab on the bottom & hold it. Don't just push the reset & release, but keep it held down.

Based on your previous message about your phone being haunted - mine is too btw, I think it's because the soft buttons aren't being acknowledged by the OS - which implies some REAL big problems.
I took mine back to the T-Mobile store today where I got told that it needs to be sent back to their workshops to fix it... and then got told that "mostly they just send out a new phone".
My phone is exhibiting the following symptoms.
1) Green and Red phone buttons do not work.
2) Soft buttons do not work.
3) D-Pad and wheel work intermittently.
4) (and most strange) the back-space key on the slide out keyboard does nothing, and on the virtual keyboard it flashes (to suggest that the key is being pressed) but still does nothing.
I've tried to access the bootloader, and perform a hard reset. I'm now looking for the original T-Mobile ROM to install (which was why I went into the shop), as the issue around the backspace key implies to me that the issue is in the OS not in the hardware.
Jon

Thanks already for all the input.
I've been trying all weekend in every different possible way to perform a hard reset. Fat fingering is really no possibility anymore. I've used every possible tool I had (needle-nose pliers, chopsticks, pens,...) to eliminate fat fingering.
But nothing helped. Jon (a nice guy) might have given a possibly correct diagnosis for my problem. But it wouldn't explain why I still can get into the bootloader.
Problems since receiving my phone from repairs:
Backlight changed out of itself => performed Hard Reset
Phone pad pops up and seems to start dialing => flashed new ROM
Wakes up constantly after a few seconds from standby => performed Hard Throw against the wall
As you can see, my latest problem is that the phone automatically wakes up from standby after a few seconds. The weird thing: it only does this when I put it in standby, but it doesn't wake up if it enters standby by itself.
=> NOTE: This may support the 'fat finger'-theory: the Kaiser gets some sort of keyboard input due to faulty hardware. Therefore I cannot Hard Reset my device, because of the additional faulty input.
I've used the "Clear Storage" method to perform one of my hard resets, but this has to be solved. I will be sending the phone back for yet another repair.
Thanks again for your input everyone.

Problem found?
I think I found the problem:
I just noticed that the camera button is already pushed in halfway (like when you focus the camera before you take a picture). If I push the button gently, it immediately takes a picture without focussing (it does automatically focus before taking the shot, but not on my command).
Also, when I enter the camera app, it sometimes instantly focuses. Other times I cannot focus at all.
Hard reset is still no go.
Yet another thanks for your useful help.

Maybe found the solution?
Hi Guys...
I found that by tapping the base of the phone, it "unlocks" itself, thereby making it work. It's become *S*L*O*W* as hell, and I'm really tempted to ask them to take a look at it, but right now I need all the functions, so I'm holding off.
But, give that a try and see what happens!
Jon

Thanks for still answering my question. Go community!
Dr. Strangelove said:
...
I will be sending the phone back for yet another repair.
...
Click to expand...
Click to collapse
Last week I finally received a fully functional and working Kaiser (have been waiting for that since december...). I couldn't accept a disfunctional Kaiser coming back from repairs.
The problem did indeed seem to be the camare button that was stuck. I tried really hard to get it to unblock, but I didn't work. I must say, I didn't try your method (didn't think of it).
Still thanks a lot.

I am experiencing exact same issues on my Kaiser (Tilt), it randomly starts to type stuff in the phone application on its own and I can't do anything to stop it, I have replaced ROMs, SPLs, Radios, now using a shipped rom with shipped radio but still that problem comes up after a few days of usage and doesn't go away until I hard reset, anyone knows what I can do to fix it? it's probably out of warranty. I checked the camera button and it seems fine.

Strange freezing problem with phone

I'm not sure if it a freezing problem or it just won't accept any input
Basically after my Kaiser has been on charge overnight I will get around to using it and can't. What will happen is the screen & buttons will not work, although they can be used for a split second every 3 seconds.
After a reset everything is back to normal, so I'm not sure what the problem is, I don't have a lot of programs installed and only 1 has been install in the past month which is A2DP Today Toggle, so far I've un-installed it and left it again but I still have the problem.
Thanks for any help

I have a similar problem. In the morning i have to soft rest the phone for it to work. Issues started after 6.5 upgrade. There must a solution somewhere in here..........

Does a hard reset fix the problem? Does this happen with every ROM you've tried?

I have only stuck with the official rom, I bought it on 6.0 and then updated to 6.1 after it's release. A hard reset does fix it but some time after it will return, bear in mind this has never done it previously just about a month ago.
I guess it might be a issue with some program that is being installed

"No sound" problem on my TD2 Please Help!!

Dear buds,
I've bought a TD2 with WinMO 6.5 lately. I had lots of bugs and fixed them all but one...
After some time from bootup (after 1 or 2 hours) the sound of phone goes off without a reason. No sound from speaker, headset or volume control buttons. However everything goes well instead sound. Phone vibrates when get call, notifications and alarms vibrate without sound etc. My only solution to get back the sounds is soft reset. After soft reset everything gets fine...
I think this is a sound driver issue but... If someone to help or show the way on forum please help (because I couldn't find same issue on search)
Thanks in advance.

If there aren't any other programs causing this by adjusting your volume levels, It may be a driver issue and you'll probably have to hard reset.
This is a common issue when flashing a new ROM without hard resetting after.

Dear Bruce,
Thanks for solution suggestion.
I hard reset three times until I bought the phone but nothing changed. I'm using the official shipped ROM and I didn't flash any other ROMs.
Extra programs list:
Klaxon
SKTools Lite
Garmin Mobile XT (Because my Copilot runs only after first installing then crashes forever)
Sportypal
Google Translator
Could that happen because of wrong flashing at factory or service etc.? I mean, this phone is a Vodafone version.
In Turkey, Vodafone signal often goes off and usually my phone gets stuck when the signal is off. Could this be the reason for unloading driver?
The digits of my phone are here:
ROM version: 2.16.468.4 (67041) WWE
ROM Date: 11.12.09
Radio Version:4.49.25.17

The fact that it works for a short while after soft reset perplexes me.
You have verified your volume is on when the sound turns off? (Sorry I have to ask this)
Any other programs running at the time is stops?
GPS software can conflict with system volume and backlight, so maybe make sure Garmin is set to dynamic settings.
Other than that, I really have no suggestions as a hard reset has not helped.
Perhaps hard reset, test for a while and see if it fails w/o any programs. Then install one prog at a time until you find the cause.
There is a slight possiblity that it was a bad flash and the driver is corrupt, which would mean reflashing the stock ROM.
Sorry I couldn't be of more assistance.

Dear Bruce
Sorry for very late answer for your last post
It's sure the phone volume is on
I've been examining the phone for one week and tried some possibilities and still no way for the bug
First I hard reseted again, then didn't install any other programs. After 6 hours, the same issue occured.
I uninstalled CoPilot (which I didn't use after hard reset) then soft reset and wait, just only some hours later, the sounds went off again.
After several soft resets, I decided to play music and monitor if it happens. Then BINGO! The sound went off just after poor GSM signal. When the phone lost the signal, it temporarily locked itself. After 2 or 3 issue, the phone sounds went off.
I think, phone starts a search after signal loss, then it tries to execute rest after 10 or 30 seconds either the signal comes back or not. After some trials it cannot reload sound .dll and sounds lock forever. But after soft reset, everything gets fine again.
To be sure about signal loss, I took the phone in flight mode for one day and wait for the same bug and the second BINGO came Phone didn't show the same bug.
After all, I reflashed the official ROM of TD2 and tried the same things but nothing changed. It's sure that the bug is not due to the wrong flashing the ROM.
For now, I'm sure that the bug occurs because of poor GSM signal of Vodafone in my region. So the question comes
Is there anything (such as a registry tweak or vice versa) to make the phone not to lock itself while loosing the signal and searching? Or do I have a way to increase the signal sensitivity?
Thanks for the worthful answers.
Regards