I tried to upgraded my SX66 system and radio rom. When I clicked "next" on the Blue Angel Flash ROM Tool to start up upgrade, the pocket pc screen turned off and my desktop was diconnected with the pocket PC (activeSyn showed "Not connected". And the desktop showed up the message "Cannot recognize USB device". I took a look at the PPC, its backlight was off and only had a message "USB v2.07" showed up". I tried to reset the PPC, but it is not working anymore, only show the message "serial v2.07". Any one help please!!!
DONT PANIC!
Try a hard reset, thats power button and reset switch at the same time..
A few months ago the charger port on my wizard snapped off, so i got out my soldering iron soldered it back on, everything worked fine. apart from the fact that it didn't sync. i live with this as i use linux and rarely need to sync i just bluetooth stuff across.
But today i bricked my phone, and can't start it (hangs on startup). so i try and flash it but i cant as it doesnt sync.
so i'm wondering if anyone has a reTouched backup rom that i can flash from SD card with? as i rely on my phone greatly.
and t-mobile are saying i can't upgrade untill january (even though my dad was able to upgrade and i got mine around the same time both on 18 month contracts)
so please anyone?
Thanks in advance.
Darius
Did you try to hard-reset your phone?
Pressing CommManager + VoiceCommand button with the reset hole, then press Talk button when prompted.
http://forum.xda-developers.com/showthread.php?t=334440
I just had that problem, and it was discussed in detail in the thread I linked above. Happy reading and good luck!
You don't have any other option except to get your mini usb port repaired of your phone,in order to unbrick or flash any other rom to your phone.
the option you are talking about is not possible, as Sdcard image created by any other phone can not be flashed to another phone,as at the time of creating backup image on Sdcard,the method uses some values from the same device that are stored at the first 0x200 bytes ,therefore, Sdcard image of one phone can not be flashed to another phone,it can only flash back the image created by the same phone.
try to revive your phone by Hard reset,it might get ok,although by doing Hard reset you'll loose all your personal data,but it might revive the phone,otherwise in any case try to get mini usb repaired.
On second thought,are using any Sdcard already in your phone ?if yes take out the Sdcard and Hard reset,it might do the trick,sometimes if Sdcard needs formate,it freezes the splash screen,good luck
I've tried a hard reset, doesnt seem to work. allthough it did once but then same thing happened next time i soft reset.
i'm using the .Mun. wm6 rom
i just took it back apart gave it a clean (cleared the tons of sand blocking it up)
resoldered the usb port
now i get "Device not recognized" where as before i got nothing.
I'm thinking i need a new phone
dariushuntly said:
I've tried a hard reset, doesnt seem to work. allthough it did once but then same thing happened next time i soft reset.
i'm using the .Mun. wm6 rom
i just took it back apart gave it a clean (cleared the tons of sand blocking it up)
resoldered the usb port
now i get "Device not recognized" where as before i got nothing.
I'm thinking i need a new phone
Click to expand...
Click to collapse
hmmmm, I think it's woken up ,I hope,do one more thing, uninstall Active sync, reboot your pc,download latest Active sync ver 4.5 and update your pc to Windows Installer 3.1 from Windows update,Install the new active sync 4.5 and try to synchronize,lets hope it'll do the trick,no harm giving it a try this way
On second thought,to check if the mini usb port of your phone has started to work is to get your phone off the usb cable,try to go into bootloader mode on phone and when in bootloader mode connect usb cable to phone and your pc,if after connecting you see a small usb appear at the bottom of the bootloader screen of your phone,than VOILLA! your all set to flash. good luck
I tried the bootloader again and i did get the USB in the corner, but, it still refuses to sync or flash (i also reinstalled activesync and everything necessary).
seems a bit strange. anyway, whenever i plug it in a get the bubble saying "device not recognized" etc etc
click that it registers as "unknown device"
Which has no drivers
"No drivers are installed for this device.
If you are having problems with this device, click Troubleshoot to start the troubleshooter."
are there any extra drivers needed for the actual device? and yes i have tried the update drivers option doesnt seem to find anything.
EDIT:
I forgot to say, i did manage to hard reset and get it working, its just incredibly slow and unreliable and im still looking to flash it.
'I tried the bootloader again and i did get the USB in the corner, but, it still refuses to sync or flash (i also reinstalled activesync and everything necessary)'.
Ok,some encouragement here,let me explain,while flashing a rom,you don't require to establish connection through active sync,infact,while flashing active sync is automatically disabled by ruu.. itself.ok
now lets try this,if you say that when in bootloader,usb is shown,then kill the active sync altogether for awhile being.Before connecting your phone to the pc via usb,disable active sync,right click active sync icon in the task bar, click 'connection settings' and remove check from 'Allow usb Connection' and 'open active sync when my devics connects'.than open 'Task Manager',click processes tab and find 'wcescomm.exe' process,hit 'end process',this will close active sync altogether.
Now if you have the official Rom of your carrier,if not download it from your carriers official website.Go into bootloader mode on your phone,connect phone to pc vis usb,when it shows usb there open rom and run RUU..,hope it'll flash your device,it's a faint try but no harm trying,good luck
Go to my thread linked above...it is actually discussed...
In a nutshell...
go to device manager and tick "show hidden devices"
scroll down to usb, uninstall "unknown device"
using task manager kill wescomm.exe (or something to that name)
shut down any firewall
shut down your pc, AND pull the plug for at least 30 seconds
replug the power to pc, boot up
check in task manager to make sure wescomm.exe didn't restart, kill it if it did
make sure firewall didn't restart
now force bootloader
plug in phone
look for corner usb
work quickly...reflash your phone before you lose any connection
"the update utility cannot connect to your pda phone..." etc
doesn't seem to be working, but i still do get the usb in the corner
dariushuntly said:
"the update utility cannot connect to your pda phone..." etc
doesn't seem to be working, but i still do get the usb in the corner
Click to expand...
Click to collapse
If you followed the directions, you should be able to flash the phone. Mine was tempermental but it DID flash. You need to make sure you follow the directions...and one more thing...
turn off your phone, unplug it, remove the battery for 10 seconds, power it on, then plug it in...after doing all the other steps. That's what got mine to read...and flash
After flashing to JP6 (which works ok) i'm unable to connect thru usb.
Odin wont connect, Kies wont connect, mass storage doesn't work.
I noticed that after the flash, when i connect the wall charger a popup appears asking me how to connect (kies, mass storace, etc).
When i connect the normal usb cable to the phone and computer, nothing happens. It charges, but doesn't connect.
I tried uninstalling and installing kies, reboots, wipe cache, factory resets..
Anyone??
Sparkly1 said:
After flashing to JP6 (which works ok) i'm unable to connect thru usb.
Odin wont connect, Kies wont connect, mass storage doesn't work.
I noticed that after the flash, when i connect the wall charger a popup appears asking me how to connect (kies, mass storace, etc).
When i connect the normal usb cable to the phone and computer, nothing happens. It charges, but doesn't connect.
I tried uninstalling and installing kies, reboots, wipe cache, factory resets..
Anyone??
Click to expand...
Click to collapse
I am definitely not an expert of anykind at all but it sounds like to me that the new software has the mapping for those 2 fuctions backwards.
Dont know if this can be changed by some simple "re-programming" or not but that is waht it sounds like to me.
If Im wrong anyone... Please correct me. I am always looking to learn!!!
You should go to Settings -> Wireless and network -> USB settings -> select Ask on connection.
when you connect, does it reboot and loop into a charging mode ie: showing a battery and a "wait" icon?
If so, I had the same issue with my first device within 3 days of using. Only thing I did was rooting and Voodoo fix (i'm not sure if I used the lagfixed for my device or for another one). If you have the same issue, I think you could revert back to stock using an SD card to transfer an update.zip of a stock image, might be worth a try
Guys, thanks for the help. When i woke up today, i gave it another try, and it worked like it should..
Still al little confused though..
A few month ago, I'm flash my x1 with custom rom....
it's working good... now I want to flash back to with original rom but not success, phone only show 0%. I tried many times, but the results remain the same. what should i do... plz help me.....
Are you flashing from PC ? If so, this is a common error, follow this advice:
" if you get connection error in RUU after the device goes to tricolour screen, then try a different USB port, also do not use USB hub, you can also try rebooting your PC, and can try using another PC. read the thread for even more tips that I don't remember now. also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet."
For me it was ok only after I installed active sync on another computer and flashed X1 from there!
PLEASE HELP.
I cannot connect to Kies both via USB and WI-FI. When USB is connected, the phone says "MTP connected" and that's it, does nothing else. Is that normal?
On Kies window when connected via USB, it keeps saying "connecting..." and never connects. I tried troubleshooting it didn't solve the problem. When trying to connect via Kies via WIFI, the Kies window says "No SIM card inserted. Unable to continue communication" (the SIM card is definitely inserted b/c I just made a call)
What should I do?
Please help.
I have tried un-checking and checking the USB debugging function but still not working.
I tried uninstalling and re-installing Kies, doesn't work.
When I try using USB mass storage, it works fine
Kies Air works ok.
PLEASE HELP
Thank you.
Never mind. I figured it out myself. Now my note is running ICS!
Thanks anyways
noddio_note said:
Never mind. I figured it out myself. Now my note is running ICS!
Thanks anyways
Click to expand...
Click to collapse
...and how did you fix your problem with Kies? :\