Related
I have installed Mamaich's 1.33.51 (final), and radio 1.10 and BT3900, the problem of "Cannot hear you" has disappeared for two weeks, but it came gain this morning. I found that there is one coincidence, may be you can help to verify this so that someone might gives us a solution:
When I set up the clock alarm to wake me (say 8am in the moring), the cannot hear you problem comes immediately (after the clock alarmed at 8am). I then turn off the alarm (unclick the clock alarm option), the problem seems has gone (better softreset afterwards).
Excellent news...this means nobody should get out of bed before 8 AM.
I am seeing this scenario:
EMPLOYEE: Goodmorning Boss
BOSS: Why are you late everytime
EMPLOYEE: Well, I can not set my alarm clock before 8 AM, coz people will not be able to hear me on my phone...!
:lol: :lol: :lol:
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
I think i remember reading something similar to this on another thread. where the problem was something to do with time sync (by activesync or network). Perhaps somebody who has had this problem can help?
Try disabling the HTC Home plugin and the Task Manager. That seems to help fix it.
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
bo78 said:
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
Click to expand...
Click to collapse
I have some problem and use another alarm proogram.
Try to use some another program like SPB Time or another.
Blacksheep said:
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
Click to expand...
Click to collapse
exact same problem here (i did visit germany not france though )
does anyone have a solution without disabling things like the home plugin?
(it's not the auto change timezone/clock from sim setting as i have that before this prob occured and its still off...)
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
You may want to check your time zone is correct. Also check that the time IS NOT being updated from the network, if your cell provider has an incorrect time zone this could cause the problem.
I have been having the same problem. I can set an alarm for 8:00AM, but it will ALWAYS go off at 7:00AM. If I set it for 8:01AM, it will go off at the right time. I have no idea why it's happening and can't seem to find a solution...
Alarm Problem
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:20 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
cliff_lusk said:
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:30 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
Click to expand...
Click to collapse
I just tried SKTools from this thread recomendation. Hopefully that will work.
Hilal said:
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
Click to expand...
Click to collapse
I agrree - clean Notification Que....., BUT cleaning every week, monts ... so boring.....
stop using buged WM clock to alarm - well, how I said, use some another clock program like SPB Time or similar.
I've always had alarm clock issues with every wm device I've ever used. Either going off at the wrong time or not at all. I downloaded 3rd party gentimer and just transfer it to each new device as I get them. I know I shouldn't have to do this and MS should have a better more reliable alarm system, but for a one time charge of 12 bucks I have peace of mind and no. more dickin' with the damn oem alarm. It's worth it IMHO.
cliff_lusk said:
I just tried SKTools from this thread recomendation. Hopefully that will work.
Click to expand...
Click to collapse
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
cliff_lusk said:
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
Click to expand...
Click to collapse
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Jim_R said:
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Click to expand...
Click to collapse
What do you mean delete the existing timers? Where do I delete them?
I use my old Nokia N70 just because it's so pathetic that HTC or MS (don't know whose fault it is) can't fix a proper alarm.
cliff_lusk said:
What do you mean delete the existing timers? Where do I delete them?
Click to expand...
Click to collapse
Perhaps I confused you by calling the alarms 'timers'. Here's how to delete them:
Start, Settings, Clock & Alarms, Alarms tab.
To delete a previously set alarm, uncheck the checkbox, and de-select days of the week. Click Ok. Do a soft reset.
In my experiance, this will remove duplicate alarms as well.
I've tried that with the exception of removing all of the checked days of the week. I will try that and see what happens. Thanks.
can someone help me with this please?
for some reason, my Tilt alarms at 8:10 and 8:15pm every night
the alarms are not set for this time. I first noticed this when I changed the time to daylights saving
has anyone else had weird thing like this?
or is there something I am missing here? and how can i fix it?
thanks so much in advance!
I got the same problem PLUS i have two extra alarms that go off at 6pm and 630pm even though I dont have my alarms set at that time!
I'm glad I'm not the only one!!! I thought I was going crazy. The only added info I can give is that I set an alarm last Saturday night for Sunday morning - DST change weekend. I set it for 7am - thinking the clock would change time overnight (it did) and alarm me at 7am NEW time.
I got an alarm at 6am (new time) and again at 7 (the one that was actually set). All week since, it's been going off every morning at 6am. I've disabled ALL alarms, and it still goes off. I've tried changing the time to 5:59am, and letting it tick through 6am - it will not go off then.
If anyone has any answers, I'd be much obliged to hear them - before tomorrow at 6am
radi0chik said:
I'm glad I'm not the only one!!! I thought I was going crazy. The only added info I can give is that I set an alarm last Saturday night for Sunday morning - DST change weekend. I set it for 7am - thinking the clock would change time overnight (it did) and alarm me at 7am NEW time.
I got an alarm at 6am (new time) and again at 7 (the one that was actually set). All week since, it's been going off every morning at 6am. I've disabled ALL alarms, and it still goes off. I've tried changing the time to 5:59am, and letting it tick through 6am - it will not go off then.
If anyone has any answers, I'd be much obliged to hear them - before tomorrow at 6am
Click to expand...
Click to collapse
Sounds like there are extra notifications in the notifications queue. I had a similar problem on my 8125 once. Get Memmaid (the trial should work just fine) and do a memory cleaning and go into the notifications queue and delete all duplicates. If that does not solve it, look in the queue and look for an alarm at 6am and delete it. That should take care of it I think. Good luck.
interesting program thanks for the tip! I did a memory cleaning and then went into the notification queue. I couldn't find a 6am (or anything that resembled that) entry, but I did select "time based", "classic time based" and "event based" and asked it to "rebuild notification queue" - I'll let you know sometime after 6am tomorrow if it worked. Thanks again!
Windows Alarm
I gave up on Windows Alarm a long time ago. I now use G-Alarm. Its a very good program and its free. If your having issues with your alarm use G-Alarm.
bradecrain said:
I gave up on Windows Alarm a long time ago. I now use G-Alarm. Its a very good program and its free. If your having issues with your alarm use G-Alarm.
Click to expand...
Click to collapse
That'd be fine if I could get rid of the CURRENT alarms
Clearing the Clocks
Try SKTools. It can clear the alarm cache. Also G-Alarm fixes the Windows Alarm bug. and in the options can override the windows alarm system. Give it a shot.
Have you checked to see if there are any appointments saved that reoccur on your pc that transferred when you sync ? I know that if you set a scheduled appointment, you will also get an alarm as a reminder.
I personally use Chronos for an alarm, but this (and a few other posts ;-) ) are off topic what the OP is asking.
It *has* to be in the notifications, so look through them carefully.
as far as i can tell
there are only 3 spots for alarms...and there are no other notifications or reminders for anything else, especially not for the same time every freaking day at that same time
its killing me slowly inside...
scowltura said:
Sounds like there are extra notifications in the notifications queue. I had a similar problem on my 8125 once. Get Memmaid (the trial should work just fine) and do a memory cleaning and go into the notifications queue and delete all duplicates. If that does not solve it, look in the queue and look for an alarm at 6am and delete it. That should take care of it I think. Good luck.
Click to expand...
Click to collapse
I downloaded Memmaid. I did the memory cleaning like you suggested and that fixed it. I'm no longer awakened at 6am. THANK YOU! I looked in the notification queue but couldn't find duplicates of anything... but the cleaning bit seems to have fixed it. Thanks again!
Hi everyone, This is my first ever post on a forum like this so please be gentle with me.
I love my new LG 4X HD and at night I set the "quiet time" to run from 11:30pm until 7:30am. My problem is that it mutes the phone correctly from 11:30pm, but in the morning it remains stuck on mute long after the 7:30am threshold. Every morning I have to de-activate the "quiet time" manually. Anyone else had this experience? Am I doing something wrong? Any advice would be much appreciated. Thank you in advance.
iyireland said:
Hi everyone, This is my first ever post on a forum like this so please be gentle with me.
I love my new LG 4X HD and at night I set the "quiet time" to run from 11:30pm until 7:30am. My problem is that it mutes the phone correctly from 11:30pm, but in the morning it remains stuck on mute long after the 7:30am threshold. Every morning I have to de-activate the "quiet time" manually. Anyone else had this experience? Am I doing something wrong? Any advice would be much appreciated. Thank you in advance.
Click to expand...
Click to collapse
I have noticed this happen sometimes, but not every morning. I haven't tried to track it down, but suspect it may be caused by using an alarm before the quiet time is set to finish and stopping the alarm with the volume buttons. May be worth checking it out - I'm not normally awake enough when my alarm goes off to think about trying to troubleshoot a small problem with my phone.
Anyone noticed that when quiet time is active the phone vibrates even when there is no notification?
roninxt said:
Anyone noticed that when quiet time is active the phone vibrates even when there is no notification?
Click to expand...
Click to collapse
No, because I always disable vibration in my settings.
Under Quiet Time there is a separate setting for vibration during quiet time - check that is not ticked.
SimonTS said:
I have noticed this happen sometimes, but not every morning. I haven't tried to track it down, but suspect it may be caused by using an alarm before the quiet time is set to finish and stopping the alarm with the volume buttons. May be worth checking it out - I'm not normally awake enough when my alarm goes off to think about trying to troubleshoot a small problem with my phone.
Click to expand...
Click to collapse
Thanks Simon. I don't think it's caused by the alarm going off before the quiet time finishes because, at least at weekends, my alarm is set for after quiet time ends. Also I use the "phone flip" to snooze the alarm (I love that feature!).
Thanks anyway for your reply. If you think of anything else or have an eureka moment on this, please let me know.
Hello all,
After being sat in the charger for a few hours or more with an alarm clock app running (I've tried several) the phone freezes for at least a minute or so and won't allow me to do anything once I've turned the alarm off. Anybody know a fix for this?
Thanks in advance.
Gary
P.S. I've checked for updates and there aren't any.
garytheanimal said:
Hello all,
After being sat in the charger for a few hours or more with an alarm clock app running (I've tried several) the phone freezes for at least a minute or so and won't allow me to do anything once I've turned the alarm off. Anybody know a fix for this?
Thanks in advance.
Gary
P.S. I've checked for updates and there aren't any.
Click to expand...
Click to collapse
havent face this issue but try to restore the system