Guys on my x1 i am experiencing low volume when i set a call on speaker. Is this normal? I have cooked rom installed with TF3D. I have checked volume settings and its set to high. Any tweak i need to apply let me know.
I also have this problem on my X1 too, it's using stock Chinese ROM R3AA010. Anybody can help?
P.S. I used Audacity on PC to increase volume of my mp3 ringtones, it works well, but then the problem still is the "speaker phone mode" during call, I can't hear anything really when I put it on my desk. It's useless now. Can anyone help please?
It's been covered to death. Search for Audiopara
Or I have it hosted here >> http://wotid.com/xperia/apps.html too.
Related
is it possible to overclock/tune the audio settings and increase the sound that comes out from the speakers???
I hate the tilt speaker, its so quiet that i always miss my calls. Plus my headphones are louder not on my ear than playing music from the speaker.
mehh???
Can't do the phone for you, but get a player with pre-amp capability in the equaliser - like GSPlayer, or TCMP
G.
just tried gsplayer, its not loud either...
is there anyway to make the speaker louder for mp3's??? :/ atleast for the ring tone.
Download your ringtones from your pda to your pc and open them with an audio edit program (like audition or ...). Raise the volume and save it.
Put them on your pda
think you should go to a doctor
i had to decrease the speaker to 50% cause it was much to loud.
there will be no software-way to increase, cause it is limited to avoid hardware-problems with the speaker. try to open your kaiser and do some electonic-work
bye andré
Are you complaining about the ring tone volume? or the music volume?
If so then do the following using your computer:
1. Save the Ring Tones or the Music Files onto your Computer.
2. click on Start/All Programs/Accessories/Entertainment/Sound Recorder/
3. On the Sound recorder, click File/Open/ ( open the Ring Tones you saved earlier or the music files)
4. Increase the volume and then save the file. You can re-record the saved file with another 25% volume increase.
unk3 said:
is it possible to overclock/tune the audio settings and increase the sound that comes out from the speakers???
I hate the tilt speaker, its so quiet that i always miss my calls. Plus my headphones are louder not on my ear than playing music from the speaker.
Click to expand...
Click to collapse
Not offense meant, I'm talking from a professional point of view: go to a ENT specialist to check on your hearing capabilities. Especially if you're young, you may have damage from various club visits, etc.
If you're older, you may have had ISSHL without even noticing it.
Seriously: I'm 42 and the HTC TyTN II is VERY loud at the max volume setting(s), so you definetely have to check out your hearing capabilities. Even if you think you hear very well, it is possible that you hear only certain frequencies very well and others not.
Just a friendly advice, you don't have to agree.
the phone has its speaker on the rear side, which is sucks!
but then they couldnt place the speaker grills on the front either for sake of looks
i (and i am sure almost everybody) keep the phone with the lcd facing up so the speaker gets blocked and the sounds are muffled.
my nokia has its speaker on the top (not front) which sounds awesome even when in pant pockets..
seriously i think uk3 is fine..lol..nothing wrong with his ears
Take a look at your sound profile.
I was having the same problem until i checked that and noticed that it defaults at sound 40% ring 40%
knocked it up to 100% and all is well now
the sound for the default ringtone... (Ring Windows Mobile) is VERY loud when volume is at max. BUT the ringtone of the mp3 that i put into the /my documents/my ringtones are very low and unable to hear them when i have the phone in my pocket. I notice about a 50% in volume change.
This goes with the windows media/audio manager. It plays really low. My hearing is fine im only 18 lol
cotc2001 said:
Take a look at your sound profile.
I was having the same problem until i checked that and noticed that it defaults at sound 40% ring 40%
knocked it up to 100% and all is well now
Click to expand...
Click to collapse
where and how did you adjust the sound profile? please elaborate..
Same here
Can you let me know if you find a solution to this. The problem is real. Maybe we have DOA units. My speaker is bearely audible.
unk3 said:
is it possible to overclock/tune the audio settings and increase the sound that comes out from the speakers???
I hate the tilt speaker, its so quiet that i always miss my calls. Plus my headphones are louder not on my ear than playing music from the speaker.
Click to expand...
Click to collapse
if you have a program like Audacity you can use that to make your MP3ringtones louder.
asfoor said:
where and how did you adjust the sound profile? please elaborate..
Click to expand...
Click to collapse
Not sure where or if it even exist on a default settings (i've got the 02 version of the Kaiser i.e the strealth) but i've got SPB phone suite installed so there is a icon on my today screen which I can just tap and set various profiles to ring and notification settings (set to 100% ring and 100% vibrate, 40% ring and vibrate, just vibrate etc.)
But as a test I did a hard reset (backed up everything with sprite backup first) and then played the default ringtone and it was very quiet , restored from my backup which had spb phone suite installed and the volume increased a lot
Hello folks ... actually my problem with Kaiser is different, as my speakers work so fine with both ring tones and music ... but my problem is with the ring back tone (RBT) which is the ringing tone you hear till the other party picks up the call ... I can barely know whether it's dialing or not ... anyone can give me the registry key/value to enhance this.
TIA
HI dude, try the SRS WOW HD app.
It works on my Kaiser
Here http://forum.xda-developers.com/showthread.php?t=355496&highlight=srs_wowhd_arm
The volume of the actual mp3 doesnt matter. I rerendered a mp3 to 20db more than it was.. and it still played the same volume on the phone... Is it just that the speaker of the kaiser is crappy?
Can anyone suggest agood custom setting
If u could clcik a Picture captuer & post it
Would help alot
Thank You
cotc2001 said:
Take a look at your sound profile.
I was having the same problem until i checked that and noticed that it defaults at sound 40% ring 40%
knocked it up to 100% and all is well now
Click to expand...
Click to collapse
How do u do that ?
where in the phone is it ?
Please Help
Hi there,
Does enyone know if it's possible to increase the overall volume of the ringtone and sms sounds...? (some kind of tweak mabye) I've got it on max but often I must really on the vibration to notice a sms or call. I often only hear the sound very soft.
Thanks..
ps i've the system volume only on 3 bar's orso, but that shouldn't effect the ringvolume should it??
I too have this issue, sound is pretty quiet to be honest. The answer i got was not helpful, basically said live with it.
yup, it isnt any where near as loud as my K-JAM (Wizard) was, but then my K-JAM was no where near as loud as my Ericsson P900 was, etc etc...
the speaker phone is an absolute joke, unless you are in a sound controlled ultra quiet room.
it seems that with every new phone and the speakers get worse rather than better.
I also find the diamond to be too quiet. I am a truck driver who drives refrigerated wagons. When parked on a bay I use my phone to watch films or listen to podcasts. But with the sound of the fridge I cannot hear anything. My old tytn 2 was spot on for sound. Any reg hacks or third party programs to boost sound? I have looked without any luck. I may have to find a mini usb speaker.
Use a player with pre-amp; for example, CorePlayer.
coreplayer`s volume doesn`t have any effect to windows sounds.
he asked for sms and speach cenversation loudness.
There is a registry hack Swiftblade uses. It's been posted in his ROM thread in the ROM section. That should do the trick
Edit: here's the link to the thread. You'll have to find the right posting yourself, though: http://forum.xda-developers.com/showthread.php?t=408109
ok found it
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN]
"EAC_GAIN_EMBEDDED"=dword:77
but when i look at my registry there is no ...\AUDIOGAIN why ??
i think you have to create a entry
no change, still quiet
I am annoyed by the low ringtone and text message alert volume, too. I'm using the bElite 0.95 ROM and I tried adding that entry to the registry. It did not change anything.
Well if the registry key isn't there I would assume the HTC audiogain application isn't installed, so there's nothing to read that value. Hence making any changes futile.
My advise: try finding the cab for that app, or try with another (perhaps stock) rom
Dear Bros,
Find that HTC Diamond volume really soft...somtime even it ring also can't hear..listen mp3 also having a hard time..Is there any way to solve this issue??
Any programme or solution that can enhance the sound n vol quality?? Hope bros here can advise me. Thank u so much.
I agree compared to the S730 (my previous phone) the Diamond is about 1/2 the volume of the Wing at the Diamonds max setting
Download "Mp3 Gain" software and set your ringtones gain to "100". Now your phone will ring like big disco.
it can cause the quality to get bad though but for ringtones
the little speaker killed quality anyway
brans0n said:
Find that HTC Diamond volume really soft...
Click to expand...
Click to collapse
If it's just audio via the headphones check http://forum.xda-developers.com/showthread.php?t=410722&page=2 for a workaround for the audiobooster disabling itself every time you unplug headphones (and then not letting you re-enable it).
For the speaker volume, I think there are other threads in the forum, but I'm not sure if the protections put in place by default are safe to disable - aren't they there to make suer your small speakers are not damaged?
I have had different roms, generally NRGZ rom for my ATT Tilt 2.
Now I don't know if this is an issue for everyone but it's an issue for me and it seems like nobody knows how to fix it.
I've tried everything, all the audioparas and all the cabs available that make the sound go louder. I LOVE when the sound goes loud, but the phone calling is disabled, meaning I can hear the person who is calling me they can't hear me because some malfunction where the mic doesnt work once this Serigo76 Loud Speaker Cab is installed.....is there anyone who knows why this is doing this? Please help because the default volume for the Tilt 2 is soooo low I can barely hear my alerts when the phone is right next to me in normal environments.....
If anyone can find out how to make this work I'll give a donation I just really need to have my phone louder.
Thanks!
themasterhook2000 said:
I have had different roms, generally NRGZ rom for my ATT Tilt 2.
Now I don't know if this is an issue for everyone but it's an issue for me and it seems like nobody knows how to fix it.
I've tried everything, all the audioparas and all the cabs available that make the sound go louder. I LOVE when the sound goes loud, but the phone calling is disabled, meaning I can hear the person who is calling me they can't hear me because some malfunction where the mic doesnt work once this Serigo76 Loud Speaker Cab is installed.....is there anyone who knows why this is doing this? Please help because the default volume for the Tilt 2 is soooo low I can barely hear my alerts when the phone is right next to me in normal environments.....
If anyone can find out how to make this work I'll give a donation I just really need to have my phone louder.
Thanks!
Click to expand...
Click to collapse
reflash rom then after all setup go to hd tweaks got to volume control change acoustic settings to normal then change increase sound to high then reboot after that test mic with call if ok then install serigo76 loud cab reboot everything should be fine after that. this is what worked for me with cell v9 rom.
also keep questions in proper tread per rom
Thanks i'll try it out
I'm new her so im still getting used to posting in appropriate areas, thanks for you're response I will let you know if that works.
IT WORKED!!!!!!!!!!!!!
Thank you very much! :d
Hello,
My gf's phone (Bell's Touch Diamond, DIAM500?) recently stopped playing sounds, including ringtones, there's no sound when the phone rings, if set to vibrate/ring it only vibrates, no sound at all when playing the ringtones or any other audio file.
However when in call you can hear fine using the earpiece or on speaker.
Volume is set to max, no mute or anything I checked all config everything is fine.
Tried soft reset and removed the battery to no avail.
Does the phone has two speakers? One for the earpiece and one for ring/system sounds? I'm trying to find out if it's a hardware or software problem.
I can't seem to find the Service Manual only for the GSM Diamond.
thanks!
Bump because I am having the exact problem. Someone please chime in.
This problem from IC Sound replace it and it's will work well .
i do get this issue
i need to tap the top of the mobile really hard and it starts working