Related
I have a rooted G1
& i have jf's 1.5 build with CM's recovery
But the other day out of being scared that i bricked my g1
i flashed to jf but after i thought i "bricked"
i realized that was normal when installing Hero SPL/Radio
So im think of finally flahing to Hero
but theres two options for me
1. flash he spl/radio again then install JAC's Slow SD hero ROm
2. wait till i get paid next week and buy a new 8gb or 16gb
(does the g1 support 16???) then install Jac's Hero Rom but with Apps2SD
oh and if any body out there with JAC's Slow SD rom does it really differ from the A2sd rom(except 4 the obvious)
An does it give you a decent start off of memory like 70mb internal or something
And since i already installed the hero spl/radio do i need to reflash them in order to install the rom
or can i just go ahead and flash the Slow SD rom
And last does Swapper make a difference on the Slow SD Rom
Thanks in advanced
Because i wont beable to read the replies tonight(maybe)
watchyaself said:
I have a rooted G1
& i have jf's 1.5 build with CM's recovery
But the other day out of being scared that i bricked my g1
i flashed to jf but after i thought i "bricked"
i realized that was normal when installing Hero SPL/Radio
So im think of finally flahing to Hero
but theres two options for me
1. flash he spl/radio again then install JAC's Slow SD hero ROm
2. wait till i get paid next week and buy a new 8gb or 16gb
(does the g1 support 16???) then install Jac's Hero Rom but with Apps2SD
oh and if any body out there with JAC's Slow SD rom does it really differ from the A2sd rom(except 4 the obvious)
An does it give you a decent start off of memory like 70mb internal or something
And since i already installed the hero spl/radio do i need to reflash them in order to install the rom
or can i just go ahead and flash the Slow SD rom
And last does Swapper make a difference on the Slow SD Rom
Thanks in advanced
Because i wont beable to read the replies tonight(maybe)
Click to expand...
Click to collapse
unless you have flashed another spl to your phone you still have the new spl. yes the g1 supports 16gb sdcards. i haven't tried the slow version of hero because i have a class 6 8gb sdcard but you should be able to flash the slow rom just fine. i think it leaves around 30mb of free space but i am not sure and swapper should make it run faster on the slow version set it to 32/30 (swap/swappiness) should give best results. you should invest in a class 6 sdcard though. also if using the swapper app make sure you put the swapfile in /system/sd so it will not corrupt your sdcard when you mount it. if there is anything else i have not covered just ask and i will answer to the best of my ability.
So pretty much since I already flashed the spl/radio from I think it was
Saphire ports or something like I'm able to flash to pretty much any ROM including JAC's Slow SD
With no problems??
And if I flash to JAC's Slow SD ROM today, can I reflash to the A2SD ROM next week when I get a new card
Oh yeah and is there a way to check my spl just to make sure I got the right one?
ohhh and I already know how to check my radio
Go into bootloader (camera+power) SPL:1.33.2005
david1171 said:
unless you have flashed another spl to your phone you still have the new spl. yes the g1 supports 16gb sdcards. i haven't tried the slow version of hero because i have a class 6 8gb sdcard but you should be able to flash the slow rom just fine. i think it leaves around 30mb of free space but i am not sure and swapper should make it run faster on the slow version set it to 32/30 (swap/swappiness) should give best results. you should invest in a class 6 sdcard though. also if using the swapper app make sure you put the swapfile in /system/sd so it will not corrupt your sdcard when you mount it. if there is anything else i have not covered just ask and i will answer to the best of my ability.
Click to expand...
Click to collapse
Well if he goes to JACHero 2.36 he shouldn't use swapper. Just create the linux-swap partition on your sd card and everything is auto from there. You wouldn't want to have the partition and use swapper because that will mess things up. Plus having linux-swap partition compared to swapper makes a huge difference.
supremeteam256 said:
Well if he goes to JACHero 2.36 he shouldn't use swapper. Just create the linux-swap partition on your sd card and everything is auto from there. You wouldn't want to have the partition and use swapper because that will mess things up. Plus having linux-swap partition compared to swapper makes a huge difference.
Click to expand...
Click to collapse
Erm...you mean JACHero 2.63
alritewhadeva said:
Erm...you mean JACHero 2.63
Click to expand...
Click to collapse
Yep my bad. Its to early here at work. lol
So if I create a linux swap patition using paragon partiton ill select "linux swap'
And then flash the rom ??and then after I boot up I won't need to do anything??
Oh and since I will most likely flash to JAC's a2sd rom because I'm going to buy a sdhc card next week
watchyaself said:
So if I create a linux swap patition using paragon partiton ill select "linux swap'
And then flash the rom ??and then after I boot up I won't need to do anything??
Oh and since I will most likely flash to JAC's a2sd rom because I'm going to buy a sdhc card next week
Click to expand...
Click to collapse
JACHero 2.63 will automatically see the linux-swap
Ok well I think I'm going to flash to slow sd for now then next week to a2sd
Oh and just to make sure my radio is 2.22.1.16 or something like that
And my spl is 1.33.2005 so am I all good to flash to jachero
and I have linux swap so I can flash right???
Oh and how would it most likely take to boot for the first time??
Thank you in advance
watchyaself said:
Ok well I think I'm going to flash to slow sd for now then next week to a2sd
Oh and just to make sure my radio is 2.22.1.16 or something like that
And my spl is 1.33.2005 so am I all good to flash to jachero
and I have linux swap so I can flash right???
Oh and how would it most likely take to boot for the first time??
Thank you in advance
Click to expand...
Click to collapse
Yep as long as you got the spl and radio you good. You really don't have to have the linux-swap partition but if you do it will pick it up automatically. And it shouldn't take a long time to boot up the first time.
Thanks man I really appreaciate the help
And from everyone els to
Oh and one last ?
Since I'm going to flash to the slow sd rom
When I reflash next week to a2sd jac with my new 4 gig or 8 I'm not sure do I have to prep the card
With the recovery img
Fat32
Ext3 and the linix swap
And it would turn on fine??
Oh and is ext3 a replacement for ext2
So that meaning all my apps on ext3
Music photos etc.. on fat32
And linux swap is what??
I think I'm confused here
I just want to make sure that next week I don't muck up my g1
watchyaself said:
Thanks man I really appreaciate the help
And from everyone els to
Oh and one last ?
Since I'm going to flash to the slow sd rom
When I reflash next week to a2sd jac with my new 4 gig or 8 I'm not sure do I have to prep the card
With the recovery img
Fat32
Ext3 and the linix swap
And it would turn on fine??
Oh and is ext3 a replacement for ext2
So that meaning all my apps on ext3
Music photos etc.. on fat32
And linux swap is what??
I think I'm confused here
I just want to make sure that next week I don't muck up my g1
Click to expand...
Click to collapse
You won't have to do anything with the recovery img because that is already on your phone. The ext3 is just like the ext2 but suppose to be safer for the card so yes all your apps will be on there and photos, music, videos and everything else on your fat32. The linux-swap is basically like giving your phone more ram. If you need help formating your card I have a tutorial in my sig on how to set everything up.
supremeteam256 said:
You won't have to do anything with the recovery img because that is already on your phone. The ext3 is just like the ext2 but suppose to be safer for the card so yes all your apps will be on there and photos, music, videos and everything else on your fat32. The linux-swap is basically like giving your phone more ram. If you need help formating your card I have a tutorial in my sig on how to set everything up.
Click to expand...
Click to collapse
His tutorial is very good and I noticed a HUGE difference moving from swapper app to linux-swap as its own partition.
Oh how big do i make Linix Swap
Anybody??
32MB is fine for swap.
help with my sdcard
Hey guys I was wondering if any of you can help me out get more space on my phone i formarted my sdcard to ex2 and linux_swap and i still get 70mb plz help I nee dthe space I'm running the latest jachero
it saves to the sd automatically
i think
it doesnt show as merged internal/sd
it just saves to sd
help
is not showing anything it keep making my internal memory smaller
well idk what to say maybe
reflash hero then see if that works
oh and are you sure you didnt download his Slow SD ROM
if you dont know what that is its basically JAChero but with apps to internal memory maybe you did that
because thats what is sounds like
Is there a thread anywhere for the installation of CyanogenMod specifically? I am afraid most of the threads of instructions are for Hero based roms. I am wondering if I need to partition my SD first,and what partition sizes and types. Also wonder if I need new radio and SPL for his ROM, and when to install the 1.4 recovery.
Basically confused with all the different guides for so many ROMs, and many assume the phone is already rooted and running a hacked ROM.
Thanks!!
im also assuming your phone is rooted? if not go here.
http://forum.xda-developers.com/showthread.php?t=442480
you can install the recovery whenever you want.
partitioning sizes are based on your card size, i have a 4gb with 500mb ext3, the rest is fat32. i wouldnt go past that but ive seen a couple people with a gig. i just think its a waste, im starting to think my 500 is a waste honestly.
flash the radio THEN the spl, then the rom. cyanogen i believe uses bind mounts. you wont have to set up anything, itll do it all on its own as long as you have a ext2/3/4 partition set up CORRECTLY.
anon1ski said:
im also assuming your phone is rooted? if not go here.
http://forum.xda-developers.com/showthread.php?t=442480
you can install the recovery whenever you want.
partitioning sizes are based on your card size, i have a 4gb with 500mb ext3, the rest is fat32. i wouldnt go past that but ive seen a couple people with a gig. i just think its a waste, im starting to think my 500 is a waste honestly.
flash the radio THEN the spl, then the rom. cyanogen i believe uses bind mounts. you wont have to set up anything, itll do it all on its own as long as you have a ext2/3/4 partition set up CORRECTLY.
Click to expand...
Click to collapse
No need to flash the new SPL.
No SPL? So all I need to do is follow instructions to root the phone, partition my SD and flash Cynogenmod ROM? I have an 8 gig SD on its way class 6.
The root directions at the link state to only format the SD as fat "Format your phone's SD card to FAT32 mode", but you mentioned partitioning with a ext partiton and a fat? No swap partition required?
captsammy said:
No SPL? So all I need to do is follow instructions to root the phone, partition my SD and flash Cynogenmod ROM? I have an 8 gig SD on its way class 6.
Click to expand...
Click to collapse
Yup just root partition, flash radio and flash cyanogenmod. No need to flash new spl. Hard spl is fine.
captsammy said:
The root directions at the link state to only format the SD as fat "Format your phone's SD card to FAT32 mode", but you mentioned partitioning with a ext partiton and a fat?
Click to expand...
Click to collapse
yes you have to have an ext partition. cyanogens roms have an auto apps2sd built in. you dont have to do anything BESIDES partition it to get a2sd to work on it.
No need to flash new spl. Hard spl is fine.
Click to expand...
Click to collapse
So is Hard SPL already on the stock phone? Sorry to sound the TOTAL noob, but your first line states that all that is needed is the new radio and CynogenMod, then you mention the flashing of SPL. Is there a "best" SPL? Not sure what the SPL is.
captsammy said:
So is Hard SPL already on the stock phone? Sorry to sound the TOTAL noob, but your first line states that all that is needed is the new radio and CynogenMod, then you mention the flashing of SPL. Is there a "best" SPL? Not sure what the SPL is.
Click to expand...
Click to collapse
No, Hard SPL is not included in the stock phone.
SPLs for DREA100 & DREA110 (Orig, Eng, Hard) [updated 5/12/09]
Great thread about SPL's
Get the though of "Best" out of your head. Think of what will work well with everything put together
Ok.. ive been on a mission to install the hero UI on my g1.
my phone is rooted, has the latest SPL and RADIO.
I flashed the hero rom and it worked.. yet there was nothing on the home page. Although if i hit send to dial, or shut the screen off it comes back locked, and gives me the dial pad. im assuming that was becuase of the no app_s on my ext2. right...?
i tried the ADB push, the ubuntu linux... it DOES NOT HAPPEN FOR ME!
(also cant install apps2sd on my phone for whatever reason)
could ive searched and searched this site with no direct answer, and no success.
If somebody could please walk me thru getting app_s to my ext2 via terminal,CP, something.. or even get apps2sd to work and ill do it 1 by 1.. IDC!
thanks in advance.
UPDATE: HAVE INSTALLED APPS2DS2 SUCCESSFULLY AND RUNNING 1.5 [CYANOGENMOD-3.6.5] FROM APPS2SD HOW DO I GET THESE APPS FROM APP_S ONLY MY EXT2 PARTITION? PLEASE HELP ME DO WHAT I NEED TO DO TO GET APP_S TO MY EXT2 AND LOAD HERO ROM!!!
oraeanast said:
Ok.. ive been on a mission to install the hero UI on my g1.
my phone is rooted, has the latest SPL and RADIO.
I flashed the hero rom and it worked.. yet there was nothing on the home page. Although if i hit send to dial, or shut the screen off it comes back locked, and gives me the dial pad. im assuming that was becuase of the no app_s on my ext2. right...?
i tried the ADB push, the ubuntu linux... it DOES NOT HAPPEN FOR ME!
(also cant install apps2sd on my phone for whatever reason)
could ive searched and searched this site with no direct answer, and no success.
If somebody could please walk me thru getting app_s to my ext2 via terminal,CP, something.. or even get apps2sd to work and ill do it 1 by 1.. IDC!
thanks in advance.
UPDATE: HAVE INSTALLED APPS2DS2 SUCCESSFULLY AND RUNNING 1.5 [CYANOGENMOD-3.6.5] FROM APPS2SD HOW DO I GET THESE APPS FROM APP_S ONLY MY EXT2 PARTITION? PLEASE HELP ME DO WHAT I NEED TO DO TO GET APP_S TO MY EXT2 AND LOAD HERO ROM!!!
Click to expand...
Click to collapse
apps2sd happens automatically with the newer ROMs. You don't need to do anything except have properly set up partitions for it to take effect. What size is your ext2 partition and is it the 2nd partition on your card?
h.nocturna said:
apps2sd happens automatically with the newer ROMs. You don't need to do anything except have properly set up partitions for it to take effect. What size is your ext2 partition and is it the 2nd partition on your card?
Click to expand...
Click to collapse
fat 32 - 1gb
ext2 2nd partition - 700mb
and yes, the card is properly partitioned
oraeanast said:
fat 32 - 1gb
ext2 2nd partition - 700mb
and yes, the card is properly partitioned
Click to expand...
Click to collapse
I don't know if it matters, but I think ext2 is supposed to be first?
xsnipuhx said:
I don't know if it matters, but I think ext2 is supposed to be first?
Click to expand...
Click to collapse
Fat32 should be first, and both fat32 and ext2 should be set as primary.
What hero rom are you trying to load? You shouldn't have to appy app_s to the ext partition. But the easiest dummy proof way of moving it would be to boot into ubuntu and you can just copy and paste.
supremeteam256 said:
What hero rom are you trying to load? You shouldn't have to appy app_s to the ext partition. But the easiest dummy proof way of moving it would be to boot into ubuntu and you can just copy and paste.
Click to expand...
Click to collapse
ubuntu WILL NOT! let me copy ANYTHING to my EXT2 partition.
It says i dont have the permissions to copy things to my card on ubuntu?
Even though it recognizes the partition.
And YES, BOTH PARTITIONS are set as primary
Hey im currently using Cyanogen's mod 4.0.2 on my original 1gb sd card, i know the apps2sd is automatically built in to the rom, however is there an easier way to create the partition on the sd card without all the commands and such? im still a noob to any help is appreciated..thanks
rschuman90 said:
Hey im currently using Cyanogen's mod 4.0.2 on my original 1gb sd card, i know the apps2sd is automatically built in to the rom, however is there an easier way to create the partition on the sd card without all the commands and such? im still a noob to any help is appreciated..thanks
Click to expand...
Click to collapse
Install Ubuntu and use Gparted
There's a script called SDsplit
there's also a script to partitoin that 51dusty made. Or you can stop being lazy and just type them it. It takes no more than 5min to do.
Or you can flash JF 1.51 adp because it doesn't use the sd so you're safe to partion the sd card and use partted in recovery. JAC has the directions on his Jacxhero ROM page. Thats what i use. Works everytime.
rschuman90 said:
Hey im currently using Cyanogen's mod 4.0.2 on my original 1gb sd card, i know the apps2sd is automatically built in to the rom, however is there an easier way to create the partition on the sd card without all the commands and such? im still a noob to any help is appreciated..thanks
Click to expand...
Click to collapse
Before I started using "parted" I used apps2sd 2 (in the market).
The trick is to make sure you don't let it run the actual apps2sd but only use it to create the partition.
CM's does it better (and you might break something!!!).
If you don't have a ext partition and run apps2sd 2 it lets you create one.
Don't make the partition more than 500mb-530mb.
By the way, it only makes an ext2 partition so if you want ext3 go to console and and upgrade_fs.
Dusty's method in parted is much better!
This is just what I did before I stopped being lazy.
ThR1LL said:
there's also a script to partitoin that 51dusty made. Or you can stop being lazy and just type them it. It takes no more than 5min to do.
Click to expand...
Click to collapse
It's called SDsplit
AdrianK said:
It's called SDsplit
Click to expand...
Click to collapse
The one I'm talking about is called sdparted found here
the script provides 3 partitions... you may not need the swapper. try to make it manually, its easy!!!
AdrianK said:
It's called SDsplit
Click to expand...
Click to collapse
do u have to have adb though if you did dustys method WITHOUT a computer?
I'm using warm donut, flashed to the phone.. before hand I was using haret until I felt everything was stable enough.
My SD card is still partitioned the old way, 7.4GB fat32, 512M ext3, 32M swap
Is there a way to enable app2sd with warm donut so I can get more room? it might just be the fun of something new for now, but watching the free space for apps going down way to quickly
lordcalin said:
I'm using warm donut, flashed to the phone.. before hand I was using haret until I felt everything was stable enough.
My SD card is still partitioned the old way, 7.4GB fat32, 512M ext3, 32M swap
Is there a way to enable app2sd with warm donut so I can get more room? it might just be the fun of something new for now, but watching the free space for apps going down way to quickly
Click to expand...
Click to collapse
i second this, I would love to do apps to SD
I think it should be do-able now that we have the automount program that allows access sd card system and user simultaneously.
yeah you guys would love apps2sd...it's cool on my hero! im glad to see all of the android development going on here.
If you guys want to do Apps2SD, you'll need an ext2 partition on your SD for it. Native Android devices have had some trouble with Apps2SD, so it's just been rewritten by Chris Soyars and Cyanogen -- instead of the WesGarner method that had been used previously. I suggest using their code as it's battle-tested.
Here's the relevant code at github, as you can see it's been recently updated:
http://github.com/cyanogen/android_vendor_cyanogen/tree/eclair/prebuilt/common/etc/init.d/
HTH
I have app2sd enabled in my eclair build.
If you want to use it you must have an ext2 parition on your sdcard. than use my spareparts app to enable. Reboot.. wait... and there you go.
Can we get this going in your build Myn?
mssmison said:
I have app2sd enabled in my eclair build.
If you want to use it you must have an ext2 parition on your sdcard. than use my spareparts app to enable. Reboot.. wait... and there you go.
Click to expand...
Click to collapse
Did a search for spareparts and couldnt find a link to a download. Anybody have a link they could throw up that would be awesome.
Thanks in advance
aviking said:
Did a search for spareparts and couldnt find a link to a download. Anybody have a link they could throw up that would be awesome.
Thanks in advance
Click to expand...
Click to collapse
It's something that's built into the build, for msi's eclair he's got some extra things built into it. But it's not something you can just download
mrono said:
It's something that's built into the build, for msi's eclair he's got some extra things built into it. But it's not something you can just download
Click to expand...
Click to collapse
i have the apps2sd.apk but it doesnt work properly. like you said i think it needs to be built into a build somehow
mrono said:
It's something that's built into the build, for msi's eclair he's got some extra things built into it. But it's not something you can just download
Click to expand...
Click to collapse
Thanks for the quick reply.
This is starting to be not worth it and I am thinking I am glad that I was able to try android on an older phone because I dont think I will be getting an android phone when I upgrade in 6 months. Getting it so I can load apps to the sd card is WAAAAAAY to much of a pain I have tried a couple of tutorials and still cant get it to work.
aviking said:
Thanks for the quick reply.
This is starting to be not worth it and I am thinking I am glad that I was able to try android on an older phone because I dont think I will be getting an android phone when I upgrade in 6 months. Getting it so I can load apps to the sd card is WAAAAAAY to much of a pain I have tried a couple of tutorials and still cant get it to work.
Click to expand...
Click to collapse
All you need to do is create a ext2 partition on your card and install system to nand and data to ext 2 partition. You can create as big of a partition as you want.
incubus26jc said:
All you need to do is create a ext2 partition on your card and install system to nand and data to ext 2 partition. You can create as big of a partition as you want.
Click to expand...
Click to collapse
Thanks for the super fast repsonse
I used gparted to create the partition and formated it to ext2.
The second part you are talking about install the system to nand and data to the ext2 partition. I have installed Myn’s Warm Donut - [RLS 4 - 03/16/2010] nand version and thats where I am at right now. Do I need to move the data folder to the ext2 partition that I created? If yes when I connect to my PC running windows 7 I cannot see the ext2 partition that I created with gparted.
aviking said:
Thanks for the super fast repsonse
I used gparted to create the partition and formated it to ext2.
The second part you are talking about install the system to nand and data to the ext2 partition. I have installed Myn’s Warm Donut - [RLS 4 - 03/16/2010] nand version and thats where I am at right now. Do I need to move the data folder to the ext2 partition that I created? If yes when I connect to my PC running windows 7 I cannot see the ext2 partition that I created with gparted.
Click to expand...
Click to collapse
i think you will have to reinstall system and wipe data. Change the location of the data when your going to reinstall. sorry
aviking said:
Thanks for the super fast repsonse
I used gparted to create the partition and formated it to ext2.
The second part you are talking about install the system to nand and data to the ext2 partition. I have installed Myn’s Warm Donut - [RLS 4 - 03/16/2010] nand version and thats where I am at right now. Do I need to move the data folder to the ext2 partition that I created? If yes when I connect to my PC running windows 7 I cannot see the ext2 partition that I created with gparted.
Click to expand...
Click to collapse
use the norootfs installer and set your data to NAND, hit data backup, then set your data to ext2 and hit data restore.
Windows can't read ext2 on it's own
mrono said:
use the norootfs installer and set your data to NAND, hit data backup, then set your data to ext2 and hit data restore.
Windows can't read ext2 on it's own
Click to expand...
Click to collapse
there you go much better answer then mine. Thanks man
would using ext2 partions make the build run smoother?
what are the benifits over NAND?
are you sure you need to have your data on the sd card? I was running apps2sd with mssmison's v7 eclair, and both my data and system were on nand, only the apps2sd was using the ext2 partition. i don't think it cares where your data.img is, just as long as you have an available ext2 partition; correct me if I'm wrong.
tatnai said:
are you sure you need to have your data on the sd card? I was running apps2sd with mssmison's v7 eclair, and both my data and system were on nand, only the apps2sd was using the ext2 partition. i don't think it cares where your data.img is, just as long as you have an available ext2 partition; correct me if I'm wrong.
Click to expand...
Click to collapse
yes that is correct. This is if your not using apps2sd
mrono said:
use the norootfs installer and set your data to NAND, hit data backup, then set your data to ext2 and hit data restore.
Windows can't read ext2 on it's own
Click to expand...
Click to collapse
Ok making progress with your suggestion after 2 days of reading and failure -- lol.
I am now able to install apps to the sd card. However when I was trying all kinds of things to get this to work I made my 8GB sd card partitioned 6.5gb fat 32 and then made two ext2 partitions evenly split.
So do I need two ext partitions?
And as soon as I made the change and was able to install to the sd card I can no longer sync with my PC. Its not a huge deal because I took out the micro sd and placed it into an sd reader and my PC could still read it. So I am guessing that its something that I changed that is causing the phone not to sync with my PC.
Any thoughts