Hey im currently using Cyanogen's mod 4.0.2 on my original 1gb sd card, i know the apps2sd is automatically built in to the rom, however is there an easier way to create the partition on the sd card without all the commands and such? im still a noob to any help is appreciated..thanks
rschuman90 said:
Hey im currently using Cyanogen's mod 4.0.2 on my original 1gb sd card, i know the apps2sd is automatically built in to the rom, however is there an easier way to create the partition on the sd card without all the commands and such? im still a noob to any help is appreciated..thanks
Click to expand...
Click to collapse
Install Ubuntu and use Gparted
There's a script called SDsplit
there's also a script to partitoin that 51dusty made. Or you can stop being lazy and just type them it. It takes no more than 5min to do.
Or you can flash JF 1.51 adp because it doesn't use the sd so you're safe to partion the sd card and use partted in recovery. JAC has the directions on his Jacxhero ROM page. Thats what i use. Works everytime.
rschuman90 said:
Hey im currently using Cyanogen's mod 4.0.2 on my original 1gb sd card, i know the apps2sd is automatically built in to the rom, however is there an easier way to create the partition on the sd card without all the commands and such? im still a noob to any help is appreciated..thanks
Click to expand...
Click to collapse
Before I started using "parted" I used apps2sd 2 (in the market).
The trick is to make sure you don't let it run the actual apps2sd but only use it to create the partition.
CM's does it better (and you might break something!!!).
If you don't have a ext partition and run apps2sd 2 it lets you create one.
Don't make the partition more than 500mb-530mb.
By the way, it only makes an ext2 partition so if you want ext3 go to console and and upgrade_fs.
Dusty's method in parted is much better!
This is just what I did before I stopped being lazy.
ThR1LL said:
there's also a script to partitoin that 51dusty made. Or you can stop being lazy and just type them it. It takes no more than 5min to do.
Click to expand...
Click to collapse
It's called SDsplit
AdrianK said:
It's called SDsplit
Click to expand...
Click to collapse
The one I'm talking about is called sdparted found here
the script provides 3 partitions... you may not need the swapper. try to make it manually, its easy!!!
AdrianK said:
It's called SDsplit
Click to expand...
Click to collapse
do u have to have adb though if you did dustys method WITHOUT a computer?
Related
guys i need a bit of help..
I had rooted my HTC Dream, plus latest radio and SPL.
Then I flashed to JF's 1.51 rom..i have yet to upgrade to the latest hayo SPL.
I wanna try out Dude's cupcake or ramjet's rom..
I need to know if I have to partition my SD card to ext3 first before flashing? Can it be done without converting it to ext 3? or leave it as fat32?
However i don't understand what is ext2 /ext3 to SD.
What is it? the defaults = ext2?
how do i partition it to ext3?
So after flashing all apps would be install automatically to the sd card?
mgear356 said:
guys i need a bit of help..
I had rooted my HTC Dream, plus latest radio and SPL.
Then I flashed to JF's 1.51 rom..i have yet to upgrade to the latest hayo SPL.
I wanna try out Dude's cupcake or ramjet's rom..
I need to know if I have to partition my SD card to ext3 first before flashing? Can it be done without converting it to ext 3? or leave it as fat32?
However i don't understand what is ext2 /ext3 to SD.
What is it? the defaults = ext2?
how do i partition it to ext3?
So after flashing all apps would be install automatically to the sd card?
Click to expand...
Click to collapse
The only time you will need a ext2 or ext3 partition is if you are going to do apps2sd. If you do you need to partitions either ext2 or ext3 and fat32. Use ubuntu to create the partitions. There are a ton of threads covering all this.
Thank you sir..
However is there any way other than a utbunu os? Can it be done with winxp?
Can I install ramjets rom without app2sd?
I am confused with abn app with terminal wats that?
So I presume ext2/3 is a linux partition and I did to have that in order for apps2sd to work?
mgear356 said:
Thank you sir..
However is there any way other than a utbunu os? Can it be done with winxp?
Can I install ramjets rom without app2sd?
I am confused with abn app with terminal wats that?
So I presume ext2/3 is a linux partition and I did to have that in order for apps2sd to work?
Click to expand...
Click to collapse
There is other ways. But you can run ubuntu as a live cd without having to install anything. But if you don't want to use that then there is paragon which you can use on winxp. Also there are scripts to run which will create a partition for you but me personally i would want to format it myself. You don't need apps2sd for ramjets rom, but if you do have your card partitioned (needs ext3) it should do everything for you. Don't really understand when you said your confused with abn app with terminal. If your talking about terminal emulator, that is a place where you can run commands like adb.
Ok.. ive been on a mission to install the hero UI on my g1.
my phone is rooted, has the latest SPL and RADIO.
I flashed the hero rom and it worked.. yet there was nothing on the home page. Although if i hit send to dial, or shut the screen off it comes back locked, and gives me the dial pad. im assuming that was becuase of the no app_s on my ext2. right...?
i tried the ADB push, the ubuntu linux... it DOES NOT HAPPEN FOR ME!
(also cant install apps2sd on my phone for whatever reason)
could ive searched and searched this site with no direct answer, and no success.
If somebody could please walk me thru getting app_s to my ext2 via terminal,CP, something.. or even get apps2sd to work and ill do it 1 by 1.. IDC!
thanks in advance.
UPDATE: HAVE INSTALLED APPS2DS2 SUCCESSFULLY AND RUNNING 1.5 [CYANOGENMOD-3.6.5] FROM APPS2SD HOW DO I GET THESE APPS FROM APP_S ONLY MY EXT2 PARTITION? PLEASE HELP ME DO WHAT I NEED TO DO TO GET APP_S TO MY EXT2 AND LOAD HERO ROM!!!
oraeanast said:
Ok.. ive been on a mission to install the hero UI on my g1.
my phone is rooted, has the latest SPL and RADIO.
I flashed the hero rom and it worked.. yet there was nothing on the home page. Although if i hit send to dial, or shut the screen off it comes back locked, and gives me the dial pad. im assuming that was becuase of the no app_s on my ext2. right...?
i tried the ADB push, the ubuntu linux... it DOES NOT HAPPEN FOR ME!
(also cant install apps2sd on my phone for whatever reason)
could ive searched and searched this site with no direct answer, and no success.
If somebody could please walk me thru getting app_s to my ext2 via terminal,CP, something.. or even get apps2sd to work and ill do it 1 by 1.. IDC!
thanks in advance.
UPDATE: HAVE INSTALLED APPS2DS2 SUCCESSFULLY AND RUNNING 1.5 [CYANOGENMOD-3.6.5] FROM APPS2SD HOW DO I GET THESE APPS FROM APP_S ONLY MY EXT2 PARTITION? PLEASE HELP ME DO WHAT I NEED TO DO TO GET APP_S TO MY EXT2 AND LOAD HERO ROM!!!
Click to expand...
Click to collapse
apps2sd happens automatically with the newer ROMs. You don't need to do anything except have properly set up partitions for it to take effect. What size is your ext2 partition and is it the 2nd partition on your card?
h.nocturna said:
apps2sd happens automatically with the newer ROMs. You don't need to do anything except have properly set up partitions for it to take effect. What size is your ext2 partition and is it the 2nd partition on your card?
Click to expand...
Click to collapse
fat 32 - 1gb
ext2 2nd partition - 700mb
and yes, the card is properly partitioned
oraeanast said:
fat 32 - 1gb
ext2 2nd partition - 700mb
and yes, the card is properly partitioned
Click to expand...
Click to collapse
I don't know if it matters, but I think ext2 is supposed to be first?
xsnipuhx said:
I don't know if it matters, but I think ext2 is supposed to be first?
Click to expand...
Click to collapse
Fat32 should be first, and both fat32 and ext2 should be set as primary.
What hero rom are you trying to load? You shouldn't have to appy app_s to the ext partition. But the easiest dummy proof way of moving it would be to boot into ubuntu and you can just copy and paste.
supremeteam256 said:
What hero rom are you trying to load? You shouldn't have to appy app_s to the ext partition. But the easiest dummy proof way of moving it would be to boot into ubuntu and you can just copy and paste.
Click to expand...
Click to collapse
ubuntu WILL NOT! let me copy ANYTHING to my EXT2 partition.
It says i dont have the permissions to copy things to my card on ubuntu?
Even though it recognizes the partition.
And YES, BOTH PARTITIONS are set as primary
So this is supposed to work automatically as long as I have my sd partitioned And its ex3. But its still clearly using my phone memory, cause my phone told me the memory is low and the partitioned part of my ed had barely anything on it......why?????
Can someone help
What does the print command show in parted?
What rom are you running?
hug
evilkorn said:
What does the print command show in parted?
What rom are you running?
Click to expand...
Click to collapse
I dnt know wat print command in parted means
And I'm running cyan 4.2.5
spazoid said:
I dnt know wat print command in parted means
And I'm running cyan 4.2.5
Click to expand...
Click to collapse
How did you partition the card? I am a total noob like you but I have a decent grasp of this stuff. I'll try and help using noob language. Did you partition the card using adb or using an auto-partitioning function from a recovery screen?
spazoid said:
I dnt know wat print command in parted means
And I'm running cyan 4.2.5
Click to expand...
Click to collapse
Read up on this helpful guide. That will help you partition your card right. Once that is done.... apps2sd is automatic.
Good luck
borodin1 said:
Read up on this helpful guide. That will help you partition your card right. Once that is done.... apps2sd is automatic.
Good luck
Click to expand...
Click to collapse
Even easier would be to use the recovery in my sig.
evilkorn said:
Even easier would be to use the recovery in my sig.
Click to expand...
Click to collapse
Easier but not as beneficial for someone who doesn't even know how to partition a card. Trust me I don't sit there and do everything in terminal neither... but... I know how if I had to and I think it's the right way. Also... I was not about to instruct someone to install a recovery just to partition a card.
This is happening on both my mytouch and g1....so I need help for both
So you cannot go into terminal on mytouch...
Used the recovery screen on Ra dream 1.2.2
spazoid said:
So you cannot go into terminal on mytouch...
Click to expand...
Click to collapse
I believe "Better terminal" let's you use VK. It's in the market.
Used the recovery screen on Ra dream 1.2.2
Click to expand...
Click to collapse
Good to know you got it done.
I didnt get it done. Apps are still taking up memory from both the phone and sd..????
My sd memory from the partitioned portion has only gone down From 447MB to 352 MB
And my phone memory is at 281MB
I deleted some things already, correct me if Im rong, but there should be no internal storage being used right?
Have you dumped your caches? That is the main culprit for me when my internal phone memory gets low...
yes I did...but like I said if apps are going to sd then they should not be taking internalk memory
I guess I see what you are saying... I have the same issue... I just thought it was the name of the game...
do you have adb? if not, you should set it up. you can view the directories on your phone and see where apps really are for sure. i think root explorer in the market will allow you to see it to, but it's a paid app. adb is something you should have either way.
I had 55MB / 89MB left on my g1 running the newest cm.
went into the application settings, then manage applications. Went down to GMAIL and Browser and cleared cache and data.
Now my memory is:78MB / 89MB
i searched for this and came up with some links, but none to verify my exact question which is, do i need a certain ROM, or recovery image, i have the RA-dream-V1.5.2. to apply apps2sd, i am currently running the latest cyanogen ROM, do i need a sd card reader or can it be done just by using terminal emulator, and i just bought a 4gb class 6 from new egg, and i was wondering what do you guys recommend for my ext2 partition space to be? so if you guys have any info on this it would be great if you threw it my way thank you!
Most rom have it enabled automaticlly when it sees an extX partition. The recovery is not required, but helpful if you don't have a linux system or other software to create the partitions on your computer. No card reader is required unless you want to format it that way. The only terminal commands you would need would be in the recovery console for you. The space is up to you and your needs and does not increase or decrease performance either way.
See the link below and it will help you doing it the manual way and with Amon_RA's recovery.
http://wiki.cyanogenmod.com/index.php/Apps2SD
thank you, you were a bunch of help, i shall try this when i get home tonight
No problem, let me know how it goes.
it asked me for swap-size and also ext2-size, im not to sure what numbers i need hmm?
If you plan on using a hero rom put in something for swap, if not put zero. The put in the amount of ext you want for apps. (normally between 256-512)
To upgrade the file system from ext2 -> ext3 use the command upgrade_fs in the recovery console.
Look at the link I gave you and scroll down to the Amon_RA section if you need more help.
it said upgrade_fs not found (nvm)
i got ext2 to ext3 thank you for all your help sorry for being a pain dude...
so to make sure i did it right, how much available phone space should i have?
It varies based on the cache you have for the apps, but I have 68mb but I have been running the same rom for a while. It should be around 80mb if you haven't done anything to build the cache, but I have the 1.33.2005 SPL which increases the internal memory size.
I get the same error "upgrade_fs not found" when I want to upgrade to ext 3 from console. From Amon_Ra's recovery I get an error too when I want to upgrade to ext 3. The other SD card I have worked perfectly with exact the same steps. What is wrong? Thanks
if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?
sakumaxp said:
i guess thats the same?
Click to expand...
Click to collapse
As the upgrade_fs script, yes.
evilkorn said:
As the upgrade_fs script, yes.
Click to expand...
Click to collapse
yeah thats what i did because it did the not found error, so i was like meh, sounds like the same haha
sakumaxp said:
if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?
Click to expand...
Click to collapse
I get an error when I press "upgrade ext2 to ext3" on my 2 GB card, the 1 GB card is done already.
sorry dude im a noob at this thing myself i guess one of the senior guys gotta answer this for you =\
Very strange, after many attempts suddenly I made the partitions, I don't know why but it worked
well thats good to hear =]
I'm using warm donut, flashed to the phone.. before hand I was using haret until I felt everything was stable enough.
My SD card is still partitioned the old way, 7.4GB fat32, 512M ext3, 32M swap
Is there a way to enable app2sd with warm donut so I can get more room? it might just be the fun of something new for now, but watching the free space for apps going down way to quickly
lordcalin said:
I'm using warm donut, flashed to the phone.. before hand I was using haret until I felt everything was stable enough.
My SD card is still partitioned the old way, 7.4GB fat32, 512M ext3, 32M swap
Is there a way to enable app2sd with warm donut so I can get more room? it might just be the fun of something new for now, but watching the free space for apps going down way to quickly
Click to expand...
Click to collapse
i second this, I would love to do apps to SD
I think it should be do-able now that we have the automount program that allows access sd card system and user simultaneously.
yeah you guys would love apps2sd...it's cool on my hero! im glad to see all of the android development going on here.
If you guys want to do Apps2SD, you'll need an ext2 partition on your SD for it. Native Android devices have had some trouble with Apps2SD, so it's just been rewritten by Chris Soyars and Cyanogen -- instead of the WesGarner method that had been used previously. I suggest using their code as it's battle-tested.
Here's the relevant code at github, as you can see it's been recently updated:
http://github.com/cyanogen/android_vendor_cyanogen/tree/eclair/prebuilt/common/etc/init.d/
HTH
I have app2sd enabled in my eclair build.
If you want to use it you must have an ext2 parition on your sdcard. than use my spareparts app to enable. Reboot.. wait... and there you go.
Can we get this going in your build Myn?
mssmison said:
I have app2sd enabled in my eclair build.
If you want to use it you must have an ext2 parition on your sdcard. than use my spareparts app to enable. Reboot.. wait... and there you go.
Click to expand...
Click to collapse
Did a search for spareparts and couldnt find a link to a download. Anybody have a link they could throw up that would be awesome.
Thanks in advance
aviking said:
Did a search for spareparts and couldnt find a link to a download. Anybody have a link they could throw up that would be awesome.
Thanks in advance
Click to expand...
Click to collapse
It's something that's built into the build, for msi's eclair he's got some extra things built into it. But it's not something you can just download
mrono said:
It's something that's built into the build, for msi's eclair he's got some extra things built into it. But it's not something you can just download
Click to expand...
Click to collapse
i have the apps2sd.apk but it doesnt work properly. like you said i think it needs to be built into a build somehow
mrono said:
It's something that's built into the build, for msi's eclair he's got some extra things built into it. But it's not something you can just download
Click to expand...
Click to collapse
Thanks for the quick reply.
This is starting to be not worth it and I am thinking I am glad that I was able to try android on an older phone because I dont think I will be getting an android phone when I upgrade in 6 months. Getting it so I can load apps to the sd card is WAAAAAAY to much of a pain I have tried a couple of tutorials and still cant get it to work.
aviking said:
Thanks for the quick reply.
This is starting to be not worth it and I am thinking I am glad that I was able to try android on an older phone because I dont think I will be getting an android phone when I upgrade in 6 months. Getting it so I can load apps to the sd card is WAAAAAAY to much of a pain I have tried a couple of tutorials and still cant get it to work.
Click to expand...
Click to collapse
All you need to do is create a ext2 partition on your card and install system to nand and data to ext 2 partition. You can create as big of a partition as you want.
incubus26jc said:
All you need to do is create a ext2 partition on your card and install system to nand and data to ext 2 partition. You can create as big of a partition as you want.
Click to expand...
Click to collapse
Thanks for the super fast repsonse
I used gparted to create the partition and formated it to ext2.
The second part you are talking about install the system to nand and data to the ext2 partition. I have installed Myn’s Warm Donut - [RLS 4 - 03/16/2010] nand version and thats where I am at right now. Do I need to move the data folder to the ext2 partition that I created? If yes when I connect to my PC running windows 7 I cannot see the ext2 partition that I created with gparted.
aviking said:
Thanks for the super fast repsonse
I used gparted to create the partition and formated it to ext2.
The second part you are talking about install the system to nand and data to the ext2 partition. I have installed Myn’s Warm Donut - [RLS 4 - 03/16/2010] nand version and thats where I am at right now. Do I need to move the data folder to the ext2 partition that I created? If yes when I connect to my PC running windows 7 I cannot see the ext2 partition that I created with gparted.
Click to expand...
Click to collapse
i think you will have to reinstall system and wipe data. Change the location of the data when your going to reinstall. sorry
aviking said:
Thanks for the super fast repsonse
I used gparted to create the partition and formated it to ext2.
The second part you are talking about install the system to nand and data to the ext2 partition. I have installed Myn’s Warm Donut - [RLS 4 - 03/16/2010] nand version and thats where I am at right now. Do I need to move the data folder to the ext2 partition that I created? If yes when I connect to my PC running windows 7 I cannot see the ext2 partition that I created with gparted.
Click to expand...
Click to collapse
use the norootfs installer and set your data to NAND, hit data backup, then set your data to ext2 and hit data restore.
Windows can't read ext2 on it's own
mrono said:
use the norootfs installer and set your data to NAND, hit data backup, then set your data to ext2 and hit data restore.
Windows can't read ext2 on it's own
Click to expand...
Click to collapse
there you go much better answer then mine. Thanks man
would using ext2 partions make the build run smoother?
what are the benifits over NAND?
are you sure you need to have your data on the sd card? I was running apps2sd with mssmison's v7 eclair, and both my data and system were on nand, only the apps2sd was using the ext2 partition. i don't think it cares where your data.img is, just as long as you have an available ext2 partition; correct me if I'm wrong.
tatnai said:
are you sure you need to have your data on the sd card? I was running apps2sd with mssmison's v7 eclair, and both my data and system were on nand, only the apps2sd was using the ext2 partition. i don't think it cares where your data.img is, just as long as you have an available ext2 partition; correct me if I'm wrong.
Click to expand...
Click to collapse
yes that is correct. This is if your not using apps2sd
mrono said:
use the norootfs installer and set your data to NAND, hit data backup, then set your data to ext2 and hit data restore.
Windows can't read ext2 on it's own
Click to expand...
Click to collapse
Ok making progress with your suggestion after 2 days of reading and failure -- lol.
I am now able to install apps to the sd card. However when I was trying all kinds of things to get this to work I made my 8GB sd card partitioned 6.5gb fat 32 and then made two ext2 partitions evenly split.
So do I need two ext partitions?
And as soon as I made the change and was able to install to the sd card I can no longer sync with my PC. Its not a huge deal because I took out the micro sd and placed it into an sd reader and my PC could still read it. So I am guessing that its something that I changed that is causing the phone not to sync with my PC.
Any thoughts