Urgent Help Needed: Diamond stuck on the loading screen - Touch Diamond, MDA Compact IV General

Hi all,
Wondering if anyone had experience such problem before, and would know any solution to this problem, as per the title?
About two weeks ago, my Diamond could not load into the wm, and remains stuck on the screen.
I thought about doing a Rom Ugrade Utility, but since it cannot load into the windows for active sync, I wonder what else may I do?
If anyone has the answer to this, greatly appreciate if you may post your solution up.
Thank you!!

Hi,
If you haven't done it already, do a hard reset, maybe that works!
If not, try this:
When you're in bootloader screen,
plug in your diamond.
THere should appear the word 'USB' on your bootloader instead of 'serial'.
Then flash new HardSPL (I recommend 1.40 olinex http://forum.xda-developers.com/showthread.php?t=400950) via your pc.
After that it should be done!
I had the same problem as you, this worked for me!

Related

Help! MDAIII stuck in Bootloader

Hi all,
I copied EnterBL.exe to my MDA III and now it immediately switched to a bootloader screen. The bootloader Ver is 2.05.
I have tried, resetting, hard-resetting and holding down Camera+Power and pressing the reset button, but nothing seems to work. Every time the bootloader ver2.05 screen comes back.
Any ideas? Help please [/b]
Try to reflash the rom. It may be a good excuse to upgrade to 1.40. You can find out how, here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Other than that, I can't imagine what else could work.
Problem Solved
Thanks a lot. Even though ActiveSync was not connected, still running the upgrade programme worked and now I am running a 1.40 i-mate Rom. Lets see how it goes.
Once again thanks a lot.
No problem. Writing that wiki page once took out all the work of explaining it each time .

ROM for Ipaq h1940?!?

Hi folks,
I,ve shot my Ipaq with a damn ROM update (stuck in bootloader mode and no reaction at all). Now, as my warranity is gone loang ago, I had to pay to let it flash. After reading here a lot for my TyTN, I asked myself if there is anyone here who can help me with a ROM for this device. It´s a german Pocket PC 2003 PRO, but WM5 is also welcome.
This should be possible to do with mtty.exe, shouldn´t it?
I found an app at sf.net called "universal bootloader", especially for the HP devices. It also uses mtty, but I don´t know, what it tries to do exactly. This little app unfortunately doesn't help me. It prompts to upload now, but nothing happens then. They say it can restore a complete ROM out of an update. Maybe it can, on mine it can't...
Would be very glad if anyone could help me here!

BIG Problem! "Black" display... what can I do?

Hello guys, let's make it short... suddenly the display of my Diamond become black and there's nothing I can do to make it on again... I tried everything: reset, remove battery... nothing! :-(
The telephone works, in fact I can receive calls and so... and it even connects through activesync. So it's a display problem for sure! :-((
Now my BIG question: I have to put it back H3G ITA original ROM (first step), that I've found on an italian forum and the original SPL that I've found here (second step), to bring the Diamond to repair.
For the ROM no probs I suppose... I'll go thru Activesync and flash it as usual, but THEN??? I won't be able to use activesync again to flash the spl, since I won't be able to set the initial configuration! :-(
Can you help me? Some ideas??? Thanks in advance!
mmm... what if someone tells me the right steps after a flash upgrade and i try to touch the screen at my best for the initial configuration???
then i could connect to activesync again maybe....
pleaaaaaaaaaaaaaaaseeeee...... give me some ideas!!! :-(((
What a shame...
i was hoping someone has an nice answer
i have exactly the same problem since yesterday - so dont worry you are not alone
you dont need to use activesync to flash
enter bootloader mode and you can connect via USB

this concludes the beta test...

Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.

touch screen does not work at all

Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
Moved as not ROM Development.
Place a welcome.not file on root of storage card can be a .txt file but change the extension doesn't want to be welcome.not.txt this will get you past all the configs on setup.
Please be more specific
Where can i find a welcome.not file?
linucu said:
Where can i find a welcome.not file?
Click to expand...
Click to collapse
You make it out of a .txt file
Have done it 4 u.
Thank you but that was not the problem
I did as you said and it worked but that was not the problem.The problem is my touch screen not responding.And it's not a hardware problem because if i did as i have been told to fully charge the phone, then do a soft reset and leave it for a day it was as new.But when i try to charge it again i got the same not responding screen. Now after all this i have another issue and that is when i try doing a soft reset the phone resets and it sopped on gray screen with Loading... and the pc gives me error connection. So i get this only i put a 6.1wm. Is this the reason for not letting me change the wm to 6.5 one? i will go crazy with these strange things that are science but have no explanation. Where is the science then? What you did was to allow me to use the phone without touch screen. Well...thank you, but i know there is a way to get the phone normal again and that is what i need you to help me with. Thank you. Catalin
Are you Hard-SPL'd?
Regards problem if software then flashing a different ROM even stock should be able to tell you, i know you think not hardware but if repetitive then maybe you just fluked the being ok again.
Anyway flash another stock ROM, then if fine flash a 6.5, you don't have to use computer as can flash via SD.
First of all thank you
Thank you because you try to help but please talk so i can understand. What is stock rom?
"even stock should be able to tell you" what is stock?
And now i have another one. It can not connect to active sync.
tell me please how can i Flash form SD?
I can not insatll anything from pc
So i don't understand why it does not allow me to do anything like hard spl, or flash rom, or anything to install from pc. It connects to active sync and lets me access the card but when i try installing something it stops.

Categories

Resources