ROM for Ipaq h1940?!? - Off-topic

Hi folks,
I,ve shot my Ipaq with a damn ROM update (stuck in bootloader mode and no reaction at all). Now, as my warranity is gone loang ago, I had to pay to let it flash. After reading here a lot for my TyTN, I asked myself if there is anyone here who can help me with a ROM for this device. It´s a german Pocket PC 2003 PRO, but WM5 is also welcome.
This should be possible to do with mtty.exe, shouldn´t it?
I found an app at sf.net called "universal bootloader", especially for the HP devices. It also uses mtty, but I don´t know, what it tries to do exactly. This little app unfortunately doesn't help me. It prompts to upload now, but nothing happens then. They say it can restore a complete ROM out of an update. Maybe it can, on mine it can't...
Would be very glad if anyone could help me here!

Related

I have an ALPINE which is stuck on "windows mobile" screen

Hi all PDA and HTC lovers.I have an ALPINE which is stuck on "windows mobile" screen. Thats because I was upgrading a new rom but during upgrade connection between my PDA and my PC was interrupted then I got many error messages on screen but it was too late now I cant get my ALPINE into bootloader mode and I only can see "windows mobile" screen when I plugged charger.Is it possible to make it run my alpine again. I would be very pleased if you could help.
Buzz..... it would be very good if you can help me coz I trust you so much you r the best
Please contact me [email protected]
Stuck on window mobile screen
I got similar problem on XDA Exec last week and fixed it. I do not know whether the steps will help on you XDA IIi or not.
I was upgrading the XDA Exec to a newer ROM version and keep getting country error code. Whatever I did caused the device to stuck on window mobile screen. I simply put the device into the cradle after reseting it. The screen still shown the window mobile image. I ran the ROM update program again (I think it is MaUpgradeUt_noID.exe). It showed an error but I ran it again withthout taking my device out of the cradle. It run sucessful the second time.
I notice that when the program runs, it close ActiveSync application from your desktop and the device screen turns to black screen with some simple texts on it.
I hope this help.
Selcuk, have you solved ur IIi yet? and which Rom were you trying to install? what was the reason of getting the upgrade interupted? I can upload the PUGs rom if you want.
Sidd
sidd said:
Selcuk, have you solved ur IIi yet? and which Rom were you trying to install? what was the reason of getting the upgrade interupted? I can upload the PUGs rom if you want.
Sidd
Click to expand...
Click to collapse
hi my fellow Siddiqui I couldnt solve that problem yet.And I tried to upgrade it again and couldnt manage to do that **** upgade please help me...Do I need to send it to HTC to Dubai? and I dont know how much does it cost ? can u please tell me if u know more about this topic?
Hi,
which Rom were you trying to install? what was the reason of getting the upgrade interupted/corrupted? I can upload the PUGs rom (as I am using it and its fantastic) if you want with the instructions.
Sidd
I was trying to upgrade to Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
rom but I couldnt. Can you please upload any other which will help me to save my alpine if possible....and I can try PUGs rom thnks so much
PM me your email address.
thansk so much sidd
Thanks so much my fellow Maarij I just downloaded files and I hope it will work Allah (c.c) bless you
thx so much but dudes I'm still in trouble please help me
it doesnt work ...
do I need to send it to HTC to Dubai can they fix an alpine that has a bricked rom....noow I neeed to shout pleasee heeeeellllp
thx so much but dudes I'm still in trouble please help me
it doesnt work ...
do I need to send it to HTC to Dubai can they fix an alpine that has a bricked rom....noow I neeed to shout pleasee heeeeellllp
please help me
I still cant find how to save my be loved alpine
Selcuk did you receive my email earlier this week??
Sidd
sorry
sorry Sidd I saw it right now coz I forgot check my mailbox actually my pc automatically downloaded it and marked as read thats why I couldnt notice your mail and I sent u back a reply

HTC TYTN II - How to recover from bad flash.

Greetings everyone,
I would like to ask for some advice.
I bought a HTC TYTN II and wanted to flash it to a ROM I found on the forum.
But to do that I had to use nueSPL-2.47.exe
That turned out to be a mistake as at the moment it started formatting to FAT32 the screen freezed. And I waited for around 15min. But nothing happend.
Now needless to say the device does not function. I tried a hard reset(Camera+Power+Reset) and just (Reset). But all I get is a screen darker than the pits off hell.
I am able to get the power light burning but that is it. Already tried putting the battery out and in again. But all to no avail. Maybe one of you can help me?
Thank you in advance.
-
Previous OS: Windows 6.1 (Dutch)
Active sync: 4.5.0
PC OS: Windows XP pro (English)
Just a thought but...you might want to check the Kaiser forum instead...
Posted in Titan forum. Moved to Kaiser forum.
You flashed a Titan SPL to your Kaiser?
Oh dear, not to worry, it might be fixable...
Can you get to your Bootloader?
Ta
Dave
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
kilrah said:
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
Click to expand...
Click to collapse
The other guy never fixed his phone
Dave
uh oh... what was your radio version? does the PC still try to load a driver when you connect the phone?
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
I sure hope I do not have to send it to my supplier. Because the phone is just 2 weeks old ;-)
Jin_member_of_triforce said:
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
Click to expand...
Click to collapse
are you able to load these drivers: http://forum.xda-developers.com/attachment.php?attachmentid=71038&d=1203255530
3G, okay, all of them are 3G... do you remember exact radio version. no problem if not, though.
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
There is of course a change I might be able to get files on there by putting my SD card in a card reader.
But does it boot from there?
Pocket controller-pro did not work for me.
Jin_member_of_triforce said:
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
Click to expand...
Click to collapse
that will not help, but there is another way... PM me, as it needs interactive step by step instructions.
im having the same issue i just ran the neuspl 2.47 and my htc tilt wont work the power light comes on and thats it can somepone please help me out i am in need of help badly!

this concludes the beta test...

Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.

another failure at 80%

just attempted to upgrade mda compact 2 using :-
RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
from the t-mobile website , it loses communication at 80% and attempts a recovery this then fails this happens every time , any suggestions before it goes in the bin?
Try any other WM5 ROM for charmer. Or use the NoID RUU. It will flash it. Search for it in the Charmer forum.
Try this: http://forum.xda-developers.com/showthread.php?t=471490
In this package there is a NoID. so thanks rmagyar for pointing to it.
thanks for the comments but still a brick
thaks have tried the noid version which is suppose to help on hanged upgrades that didnt work I, have noticed on an old thread others hanging at 95% have used a radio version which I have also tried that didnt work, I have noticed that others have re-installed v2.6 and its been fine my problem is foolishly I did not bother with the backup , has any one got 2.6 or any other suggestions ...Thanks
There is one possible way. But nobody can say how it works. You have to do a upgrade with a SD-card. This is the ultimate solution. But I can't tell you how it works on Charmer I yust know it for the Wallaby. But you can just look in the Prophet forum maybe somebody there knows how it works.

Urgent Help Needed: Diamond stuck on the loading screen

Hi all,
Wondering if anyone had experience such problem before, and would know any solution to this problem, as per the title?
About two weeks ago, my Diamond could not load into the wm, and remains stuck on the screen.
I thought about doing a Rom Ugrade Utility, but since it cannot load into the windows for active sync, I wonder what else may I do?
If anyone has the answer to this, greatly appreciate if you may post your solution up.
Thank you!!
Hi,
If you haven't done it already, do a hard reset, maybe that works!
If not, try this:
When you're in bootloader screen,
plug in your diamond.
THere should appear the word 'USB' on your bootloader instead of 'serial'.
Then flash new HardSPL (I recommend 1.40 olinex http://forum.xda-developers.com/showthread.php?t=400950) via your pc.
After that it should be done!
I had the same problem as you, this worked for me!

Categories

Resources