start menu jumps with no reason - P3600 Software Upgrading

Hello.
i have the trinity with WM 6.1 ROM and the start menu sometimes jumps with no reason.
i flashed a new ROM and still the problem continues.
my next test will be to make a hard reset and not install any other program and check again.
then install each program at a time and check again.
doe's anyone have an idea?
did anyone happend to come across to this problem?
thank you!

If you have a screen film protector have you already tried to detach it, clean it, clean the display and reattach the screen protector?

This is one of the Trinity common problems.
I managed to get rid of it after I accidentally crashed my p3600 touchscreen digitizer and change it with a 3rd party digitizer bought on ebay.

Thank you.....

Related

Touch screen stop responding

Hi everybody
I did a hard reset to my phone this morning, everything worked fine, i took the phone with me to work, and there, I discovered that the touch screen would stop responding.
I tried soft reset few times, didn't helped.
Then I tried Hard reset which also didn't helped - I am now stuck on the Align Screen thing.
1- what can I do to solve it? I have tried blow trying my phone gently for a while in case some moisture got inside somehow. I also tried to clean the edges of the screen with a business card.
2- will att help me with this? I bought this phone on Ebay few months ago. the phone is less than a year old. all I got is the HTC imei and unlocking code.
Any help?
Hey i had the problem with one of the roms here... just reflash it with a newer ROM, that should fix it
drownage said:
Hey i had the problem with one of the roms here... just reflash it with a newer ROM, that should fix it
Click to expand...
Click to collapse
Just did it. tried two different roms.
neither fixed the problem
HELP!!!!
zackzack said:
Just did it. tried two different roms.
neither fixed the problem
HELP!!!!
Click to expand...
Click to collapse
I'm sure that somebody here have an advice for me
Not sure if this'll help you, but I had a similar problem, and what was causing it was the screen protector had slipped and was squeezed between the casing and the screen itself down one side - one I removed and replaced the screen protector, it worked fine.
doktorrob said:
Not sure if this'll help you, but I had a similar problem, and what was causing it was the screen protector had slipped and was squeezed between the casing and the screen itself down one side - one I removed and replaced the screen protector, it worked fine.
Click to expand...
Click to collapse
I have no screen protector.
what else coult it be?
I had a similar issue yesterday. I am using Dutty's v2 ROM. My problem started when I tried to enable TouchFlo. I could not get the TouchFlo to work and I did not have a lot of time to play with it. After 30 minutes, Goodlink locked the phone and when I went to unlock, the touch screen did not work. I did a soft reset and that did not help. I had to go back thru and disable TouchFlo and do a soft reset. This fixed it for me.
RajunCajun said:
I had a similar issue yesterday. I am using Dutty's v2 ROM. My problem started when I tried to enable TouchFlo. I could not get the TouchFlo to work and I did not have a lot of time to play with it. After 30 minutes, Goodlink locked the phone and when I went to unlock, the touch screen did not work. I did a soft reset and that did not help. I had to go back thru and disable TouchFlo and do a soft reset. This fixed it for me.
Click to expand...
Click to collapse
Thanks for the advice!
But I am stuck in the align screen. any idea how am i getting trough it?
1. disable TouchFlo
2. align screen
done. good luck
terencelaw said:
1. disable TouchFlo
2. align screen
done. good luck
Click to expand...
Click to collapse
How can I disable the touchflo if I have no access to the control panel. I am stuck in the align screen after a hard reset
put a file called welcome.not in the root of your sd card
XtreMe_G said:
put a file called welcome.not in the root of your sd card
Click to expand...
Click to collapse
I just put the file there and it skipped the align screen.
The setting for the touchflo are only enabling/disabling the sound when scrolling. how can I disable it?
zackzack said:
I just put the file there and it skipped the align screen.
The setting for the touchflo are only enabling/disabling the sound when scrolling. how can I disable it?
Click to expand...
Click to collapse
HELPppppp!
if you already did a hard reset, and its still not responding, it most likely is a hardware problem.
First...
MAKE SURE YOU HAVE FLASHED THE PHONE BACK TO THE ORIGINAL RADIO AND ORIGINAL ROM!!!
Second...
Call AT&T. Tell them you have a tilt cell phone and you need to warranty exchange it because the touch screen stopped working.
Third...
Tell ATT that you already hard reset, you already soft reset, and you have already factory reset the phone. Then tell them you have NO additional software on the phone, no installed programs, and have changed nothing.
They will ask you some questions, get your imei# and etc. etc.... then they'll make sure you still have a warrantly remaining. If THAT phone still has a warranty remaining, you should be able to get it exchanged.
Let us know what happens. It DEFINITELY sounds like a hardware issue.
I would go for the business card trick again, it surelly sounds like you have something between the casing and the screen. Perhaps you should try with an other "object" to clean between the screen and casing.
nybom said:
I would go for the business card trick again, it surelly sounds like you have something between the casing and the screen. Perhaps you should try with an other "object" to clean between the screen and casing.
Click to expand...
Click to collapse
Yup agreed, i have had this very same issue, I just ran my finger nail around the edge of the screen under the casing. Even a small build up of dust can cause this issue.
Good Luck
MM
MaxMotus said:
Yup agreed, i have had this very same issue, I just ran my finger nail around the edge of the screen under the casing. Even a small build up of dust can cause this issue.
Good Luck
MM
Click to expand...
Click to collapse
Thanks all for the help.
I tried fingernails, business card, everything. not working
Installed 2 different tweak apps (KaiserTweak , PocketTollMan) to disable the touchflo. Both can not be controlled at the relevant areas without the touch screen. God, it's getting complicated.
Should I open the case around the screen and make sure everything is clean?
zackzack said:
Thanks all for the help.
I tried fingernails, business card, everything. not working
Installed 2 different tweak apps (KaiserTweak , PocketTollMan) to disable the touchflo. Both can not be controlled at the relevant areas without the touch screen. God, it's getting complicated.
Should I open the case around the screen and make sure everything is clean?
Click to expand...
Click to collapse
anybody ?
nimda0 said:
First...
MAKE SURE YOU HAVE FLASHED THE PHONE BACK TO THE ORIGINAL RADIO AND ORIGINAL ROM!!!
Second...
Call AT&T. Tell them you have a tilt cell phone and you need to warranty exchange it because the touch screen stopped working.
Third...
Tell ATT that you already hard reset, you already soft reset, and you have already factory reset the phone. Then tell them you have NO additional software on the phone, no installed programs, and have changed nothing.
They will ask you some questions, get your imei# and etc. etc.... then they'll make sure you still have a warrantly remaining. If THAT phone still has a warranty remaining, you should be able to get it exchanged.
Let us know what happens. It DEFINITELY sounds like a hardware issue.
Click to expand...
Click to collapse
i agree with this one, i would just do this.... since you have pretty much done everything there is to do... plus if you exchange it... you wouldnt be left back on anything since you have already hard reset your phone so your would just be right back in the same place....

touch screen problem treo 750

I have the well known problem with not working touch screen. I have read all this posts on different forums but haven't find the answer. If somebody tried already - please tell me replacement to new (lcd + touchscreen) will fix this problem?
I found plenty of screens on ebay http://cgi.ebay.com/PALM-TREO-750-L...9|66:2|65:12|39:1|240:1318|301:0|293:1|294:50
20-30 bucks.
LCD
gfreeman said:
I have the well known problem with not working touch screen. I have read all this posts on different forums but haven't find the answer. If somebody tried already - please tell me replacement to new (lcd + touchscreen) will fix this problem?
Click to expand...
Click to collapse
I had a keyboard problem with one of my treo and I tried to cut up the phone to pieces. I pulled all of string cables one for the keyboard and one for the display. Cleaned all and then assembled it. It looks like workink well but the touch screnn doesn't answered. I cut up again and plug in the display cable again. It works now again.
Since then I dont cut up the phone
shubonker said:
I found plenty of screens on ebay http://cgi.ebay.com/PALM-TREO-750-L...9|66:2|65:12|39:1|240:1318|301:0|293:1|294:50
20-30 bucks.
Click to expand...
Click to collapse
Yes I know I also find them, but I want to know, does new screen fix problem, or after purchase of new screen I will have not working treo with 2 screens, and 30 bucks less
laces said:
I had a keyboard problem with one of my treo and I tried to cut up the phone to pieces. I pulled all of string cables one for the keyboard and one for the display. Cleaned all and then assembled it. It looks like workink well but the touch screnn doesn't answered. I cut up again and plug in the display cable again. It works now again.
Since then I dont cut up the phone
Click to expand...
Click to collapse
You know I already disassembled it and assembled it back for few times, but it still not working. Everything looks very nice and clear - like new but...
New screen doesn't solve the problem. I purchased a new touch screen (lcd + digitaizer) - it start working for few minutes, then stop again. I put off the battery an leave it like this for a month. Than I switch it on - it works (I successfully unlock it, passed f..... alignment screen). Now I use it, but touch screen doesn't work!
Please if anybody now what is the real problem, let me now.
I have the same problem. I upgraded my Treo 750 to a new ROM. It worked for a couple of hours and then it doesn't work.
I have read in a different forum that you have to turn down the screen brightness to less than 1/2 and it should work. I tried that and it still craps out.
I am also looking for a new digitizer from ebay. Would this work? Or do I have to purchase the screen and digitizer.
Would a new screen or digitizer work or will it crap out in a hour or so?
Besides getting a new phone what would be the next step for a solution?
I think it is a software problem. With WM5, 6 and 6.1 the touch screen didn't work but on the newish 6.5 version here it works just fine, all the time!
same
am currently having the same problem whaat is d solution pls is it rom WM6.5? who hav solve this problem?

Touchscreen do not work anymore... but why?

Hello guys,
I have a big problem! My Diamond do not work anymore. I have used a rom for some weeks and by now, the touchscreen doesen't work. But why? Today, I was wondering, that the TouchFlow 3D got problems. When I use the touchscreen, I couldn't use the touchflow. Everytime, it scrolls the clock down and up (like using the sense). the only way was to use the hard buttons.
Then I decided to make a hard reset. and now, its not possible to get through the touch calibration screen. nothing will happen. what can i do?
please help me!
Have you tried another rom ?
I am experiencing the same problem with my diamond!
and I have read in another thread that it could be due to malfunction of the digitizer installed on top of the lcd screen
http://forum.xda-developers.com/showthread.php?t=411386
I have tried flashing with another rom, but still no luck
so I have decided to order a brand new LCD+digitizer kit from ebay and try to get this fixed my own
wish me good luck
here is the link the the ebay page
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170398900029&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en

touch screen does not work at all

Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.
What you need to do is fully charge the phone, run a backup usin PPM or sprite then do a soft reset and leave it for a day, if that doesnt workt hen run a hard reset and it will fix it, been through that problem too a couple times and it ends up workin fine
Thank you
Thanks a lot. but please tell me when you say to leave it for a day i should leave it with baterry in or out. Or do you mean to do the soft reset and leave it for a day to the screen where it sais to tap the screen. And by a day you mean 24h?Thanks again anyway
Ok.But where can i find a new lcd? And how much is it one?
I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
i flash the ori rom n change lcd n ribbon but still cant do the alignment on touch screen n get into the menu try the board n put it in another p4550 still cant touch screen,is it board problem ?
i have the same problem
i think its a hard problem i try everything but nothing
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
I had prob woth touch screen and non functional front camera. Restored function by replacing flex cable. This flex cable has the buttons for the keypad as well as supporting the front camera. When I examined the flex cable, the portion that moves in and out when sliding the keyboard appears to be slightly damaged on right and left sides. The damaged portion does contain very thin circuits.
Not sure why this was posted in Accessories but I'll move it to General for you.

HTC Digitizer problem (?)

Hey there everyone, thanks for taking a look at this post and (hopefully) someone can give me a bit of advice on the following problem:
I got an HTC Pure through ebay for a friend, said it had a touch screen problem (usually no problem, I just replace the digitizer when I see it). However, after I installed the new digitizer, the touch screen doesn't work except after doing a hard reset, and ONLY works with the touchflo moving through the different categories (left to right and vice-versa). Only the top half of the screen works, and it looks like it's controlling what should be the bottom half of the screen. I'm unable to get into the screen calibration settings because if I move out of the original touchflo screen (i.e., hit the hardware windows button or another hardware button) then there's no touch screen responsiveness at all. I already flashed an original stock Pure ROM, still no difference than before. My question is thus:
1. Can the screen calibration settings be accessed through a registry editor? And if so, can anyone provide some better settings?
2. Is this just a hardware problem and can't be fixed through software tweaks? Would flashing a different ROM possibly help?
My goal is to eventually unlock the Pure and install a Spanish language ROM, but I'm not going to put more money into the phone unless I can actually use the touchscreen correctly.
Thanks for any response!
Get an emulator such as Pocket Controller or My Mobiler and access the screen via your PC.
Run the screen calibration and see if that fixes it, if not its likely hardware related.
Not sure where in the registry calibration setings are but you should be able to find it with a search.
Thanks, I'll try that and I sure appreciate the quick response. Can't do it today but if it works I'll post and let everyone know how to fix it if they somehow encounter the same problem. Thanks again!

Categories

Resources