Sorry for this, i've searched the forums but get so many responses i can't find exactly what i need.
Could somebody point me to a guide , or tell me how to....
-set up my diamond to work as a modem for my PC
Need to connect to internet on a pc where network card is busted.
Sorry for such a noobish question and thanks in advance for any help
Danny
Install active sync (You dont need it to connect but its install the drivers you need).
Connect youre mobile over usb and start the internet connection sharing programm on your phone.
Windows should now install the driver automatic and connect trough a LAN Connection.
thank you
sorry for being so retarded i was looking for something much more complicated
all sorted now
cheers
Related
my computer is not reconizer this my Kaiser help me urgent
That's very little information. Has it ever worked? What have you changed recently? Does your computer even acknowledge that the device was plugged in? Is there an existing partnership?
You can try ending all partnerships between the computer and the phone. Without knowing what you've done, it's hard to give any more advice than that.
I'd also direct you to the Wiki and the Sticky...they both have lots and lots of information about the phone. I'm just assuming this has something to do with flashing a ROM on your phone because it's in the Upgrading forum and not the general Kaiser forum.
dont understand, i have windows xp and activesync dont have reconizer the kaiser!!! and dont flash the pda :S:S
Your English is obviously poor.
So, try this:
1) delete your devise from Activesync.
2) reboot your computer
3) plug in your phone to the computer.
Make sure you have the latest version of ActiveSync as well.
If I understand you correctly, you have not flashed your phone. Is that correct? If I am correct and you are still using the original ROM and software, then this question really belongs in the Kaiser forum and not the Kaiser Upgrading forum.
grizzley said:
Your English is obviously poor.
So, try this:
1) delete your devise from Activesync.
2) reboot your computer
3) plug in your phone to the computer.
Click to expand...
Click to collapse
DOnt Work!!!!!! :S flash without usb ???? how to???
x-club said:
DOnt Work!!!!!! :S flash without usb ???? how to???
Click to expand...
Click to collapse
HELLO I HAVE THE SAME TROUBLE WITH MY TILT THE USB IS NOT WORKING SO I HAD TO USE MY SD CARD AND FLASH MY PHONE ITS KIND HARD BUT ONE YOU READ AND DO STEP BY STEP IT REALLY EASY.IM SENDING YOU THI SITE TO READ ON HOW TO DO THIS HOPE THIS HELPS AND IF SO PLEASE LEAVE A COMMENT ON HOW I HELPED I PROMISED THIS SITE SINCE THERE ARE FEW THAT TAKE THE TIME TO QWORK WITH YOU FOR FREE I SAID I WOULD TRY TO DO THE SAME.. A SPECIAL THANKS TO ALLTHE WAY FOR TEACHING ME.....
http://forum.xda-developers.com/showthread.php?t=336158
Flashing using MicroSD Card - xda-developers HOPE THIS IS WHAT YOUR LOOKING FOR..GODBLESS....
sexylatin1 said:
HELLO I HAVE THE SAME TROUBLE WITH MY TILT THE USB IS NOT WORKING SO I HAD TO USE MY SD CARD AND FLASH MY PHONE ITS KIND HARD BUT ONE YOU READ AND DO STEP BY STEP IT REALLY EASY.IM SENDING YOU THI SITE TO READ ON HOW TO DO THIS HOPE THIS HELPS AND IF SO PLEASE LEAVE A COMMENT ON HOW I HELPED I PROMISED THIS SITE SINCE THERE ARE FEW THAT TAKE THE TIME TO QWORK WITH YOU FOR FREE I SAID I WOULD TRY TO DO THE SAME.. A SPECIAL THANKS TO ALLTHE WAY FOR TEACHING ME.....
http://forum.xda-developers.com/showthread.php?t=336158
Flashing using MicroSD Card - xda-developers HOPE THIS IS WHAT YOUR LOOKING FOR..GODBLESS....
Click to expand...
Click to collapse
how to format microsd and is work in card 2GB?
x-club said:
DOnt Work!!!!!! :S flash without usb ???? how to???
Click to expand...
Click to collapse
If this is the best you can come up with after people have tried to help then I guess you haven't read the WIKI yet.
It's obvious English isn't your first language, but if you don't read AND understand the WIKI then you will break your phone.
If necessary get a friend to help with translation. Or post your question in English and your own language - then maybe someone on the forum who speaks your language can help out.
I just want to connect so i can update to the newest swedish rom released.
And of course everything else
When i connect the usb to phone i get the alternatives "Activesync" or "disc-unit" or something like that.
I choose activesync.....it connects but after a few seconds it disconnects.
It will show up on my pc but just disconnects right after....it has always worked before.....i really don't know what to do.
Then i use the other alternative to connect.....it seems stable but it is extremely slow.....one mp3 at 3mb takes about 40minutes to upload to phone.
I have the "Official Update 1.37.401.3" installed but i want install the newer one.
Please help me.
My usb cords i have tried using is flawless....everything works.
Im running Vista Ultimate Retail.
Please help me through this ordeal....I'm almost at the point that I'm going tp buy another phone and leave htc forever
I really want this phone to work. It worked before actually...It might be when I updated with the Official Update 1.37.401.3 or exactly a few days after that my problems appeared.
REALLY NEED YOUR HELP XDA-PEOPLE!
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
poedgirl said:
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Click to expand...
Click to collapse
I don't know what bootloader is...sorry. And there was an older rom on the phone before i upgraded.
hms666 said:
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
Click to expand...
Click to collapse
Yes it is enabled.
Windows XP uses Active sync V.4.5.0
Windows Vista uses Windows Mobility center:
http://www.microsoft.com/windows/windows-vista/features/mobility-center.aspx
First check your advanced energy-settings (control panel, system)
To make sure put everything on 10 minutes, as these settings will reset as soon as your new (and faster 1.93) rom is installed.
Connect your phone and make sure you select the sync option, not the external disc option. Make a backup.
Then use an unsigned hard-spl if you have firmware 1.37 or higher. (signed won't work) http://forum.xda-developers.com/showthread.php?t=400950
When finished install the rom you like.
I Resolved It!
I managed to flash my phone with the new swedish official rom.
So I can connect now.
Thanx for helping me.
The problem seemed to be in Windows Vista...it wouldn't allow my HTC to keep beeing connected for too long
I resolved the problem on my other computer.
And I love the speed of the new rom by the way ...It gets better and better all the time.
Thanx again XDA Developers.
have same problem
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Chino68 said:
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Click to expand...
Click to collapse
I used my other computer (Win XP) to flash my htc diamond with the newest swedish rom...and now it will even work connecting to my vista computer.
Good luck with your phone
Hi I had to reinstall my Vista HP...but after that I cant connect to internet throught WMDC (latest) I also HR my Diamond never had these problems pls help me something...
PS: firewall is off and else WMDC works normal even synchronization...
PS2: tried latest duttys, bepes and swiftBlades ROMs
thx for help...
it was because of advance network functionality I had to uncheck it...
edit: connection without advanced network functionality is very unstable so Im at the beginning anybody know whats wrong???
Same problem by me.
Any solutions??
I have a problem with ActiveSync, I cannot connect with it but when i put the usb cable to the phone, my phone start charging but AvtiveSync has no respond, what to do? I did use Activesync before but now,it stop working.any solutions?
And 1 noob Question, Can i flash Any rom using MicroSD Card after installing cmonex HardSPL 3.29? Read all guide but need some expert for confirmation Scared to brick my phone lol
Forget to mention, i did try uninstall and install again ActiveSync but no luck
Hello all,
My problem is very simple. I follow lot of tutorial on how to make WPDM works... but none of them seems to be give a right way to work around my problem.
I succeded to install touchXperience with WPDM but... every time i try to connect using USB, WPDM says:
TouchXperience version 1.3.2.0 or later is required. Please unistall the current version of TouchXperience.
So... i read that i have to restore default settings and restart my computer. But i did that thousand of time and it never work for me.
I really dont see where is my mistakes... if you have some hints.... cause i'm a bit lost.
Thx in advance.
PS: I'm quite bad in english. Plz.. don't blame me
Globalfailure said:
Hello all,
My problem is very simple. I follow lot of tutorial on how to make WPDM works... but none of them seems to be give a right way to work around my problem.
I succeded to install touchXperience with WPDM but... every time i try to connect using USB, WPDM says:
TouchXperience version 1.3.2.0 or later is required. Please unistall the current version of TouchXperience.
So... i read that i have to restore default settings and restart my computer. But i did that thousand of time and it never work for me.
I really dont see where is my mistakes... if you have some hints.... cause i'm a bit lost.
Thx in advance.
PS: I'm quite bad in english. Plz.. don't blame me
Click to expand...
Click to collapse
1]Disconnect yur phone
2]Uninstall your Touchexperience from your phone
3]connect yourphone to your pc
4]activate the WPDM
5}It will automatically install new TE to your phone.