Database Develop

Problem With Making Calls After Device Has Been Locked

Hi All,
I've got a Diamond which is running Duttys V4 ROM with Radio v1.09.25.23.
Everytime i lock the phone (holding the hard {END} key), leave the phone for a length of time (say 1-2 hours - a shorter time will not produce this issue) and unlock the phone (bottom left {unlock} - middle right {confirm}) i am then unable to make outgoing calls. The phone still has signal and will recieve incoming calls / sms but upon trying to make an outgoing call or send a sms i recieve the message {your phone has no signal...yadda yadda yadda}.
Now, if i disable the Phone from comms manager and re-enable it, it will start to work and likewise, if i recieve an incoming call when the device is not working, it will work fine after the incoming call has ended. It just seems as if the phone isn't aware it's got a signal until it is made aware of this fact by an action, say incoming call.
Incoming SMS's although they come through, don't make the phone return to a working state.
Obviously there is a easy work around for this which is - Don't lock the bloody device - i can leave it for days with the screen off but no MS Lock enabled and it will still work fine.
Would be nice to get it sorted if anyone has got any ideas or seen anything like this. Could this be as simple as a regkey??? I suppose my other worry is that it my be indicative of a larger hardware problem...etc
Oh i've also tried upgrading the Radio to v1.11.25.01 which i'm now using with slightly increased battery life and higher than normal signal strength but no joy with it resolving this issue.
Tried a hard-reset, numerous soft-resets and all to no avail...
Sorry for a lengthy problem post and thanks in advance guys,
Tom

are u using s2u2?

vishalkishnani said:
are u using s2u2?
Click to expand...
Click to collapse
Nope, not using s2u2, although i have tried this to get around the problem and it doesn't seem to re-create the issue when S2U2 is used.
Just to re-iterate, it only happens when the device is locked with the inbuilt windows lock and left for a while (1hr ish)
Any clues anyone?? Does WM6.1 do anything strange with the radio when the device enters lock mode - ie. does is put the radio into "sleep mode" which only looks for incoming signals and then not come out of it properly?
Is anyone else having an issue like this at all??
Any help would be much appreciated!
Cheers guys

My Phone Rings Once and Goes to Voicemail

Hi, like the title says, whoever calls my phone basically gets sent straight to voicemail. On my side, the phone rings once and stops.
I have the latest NRG GTX ROM installed and hard reset the phone every time flash it. This probably has been happening since mid April and I have been flashing my phone since late December and had no problem until mid April.
I called AT&T and asked if they could help and they tried giving it different amount of rings before it goes to voicemail. That didn't work either... I have posted in the NRG forum and nobody could help, besides telling me to hard reset and Vol up+down, which didn't work either.
So... if anybody experienced the same problem as me that fixed it or have an idea on how to fix it, please respond! I need your help! THANKS!!

Its in the Call Forwarding settings.
Hi there.
The answer to your issue lies in the Call Forwarding settings.
Use Touchflo to go to @Settings' and hit 'All Settings' to enter the Windows menus. The following is in WM6.1 so maybe slightly different if you are using 6.5. Hit the 'Personal Tab' and select 'Phone'. Then select the 'Services' tab, highlight 'Call Forwarding' and then hit 'Get Settings...'.
You will then see a variety of settings and tock boxes that relate to call forwarding and in particular. In the drop-down box for 'Forward After:' change the value to something longer - like 30 seconds...hit ok, hit ok. Done

OMG! Thanks, left of centre. You saved me the trouble of returning the phone for a new one. Idiots at at&t should learn from guys like you that know whats going on. Much appreciated and thanks again for your help!!

Sorry for bringing this up from the dead but this was the only thread that was right on with the problem.
I have a captivate running perception and same problem.
I was just wondering if anyone knew how to fix or change the forwarding settings on this phone to prevent this exact problem?

Phone ring once and just vibrate.
I have the same problem with my xperia x10i. when someone calls me it rings once then just goes to vibrate mode...can someone help me fix this problem please Thank you in advance.

[Q] Calling function getting stuck

Hi,
I'm new here so please forgive me it i post an already known issue.
I flashed my sgs using KIES with the registry trick. Since installing froyo the calling function of my phone got stuck 2 times. It shows the green active call icon and on opening the call interface it is all gray, no button klickable. I think it happens when both people talking finish the call at the same time. Switching to flight mode does not work and i cant place an other call. Rebooting the Phone helps.
I hope maybe someone has an idea how to fix it other than don't finish call and wait for the other end.
Thanx in advance for your help!

[Q] I can't answer incoming calls, no button works.

I am not sure how this happened but,I am unable to answer incoming phone calls. No matter what button I press, and I have answering mode enabled, also having answering key enabled or not I still can't answer. I don't know if this other glitch will help as a clue to figure this out or not but, the ringertone is stuck on default and rings as one long continuous ring with no break. If I go to settings and try to change the ringtones or notification tones, I'm unable to do that either. When I am selecting from the incoming calls section of sound in settings, in either phone or notification ringtones, when I choose between android or zedge the phone just freezes or sends me back to main settings screen. When it freezes, it really freezes. I have to pull the battery because the power button does nothing.
I'm about to flash a new ROM (not sure which yet), and was wondering if this problem will go away, or will it be persistent and plague me in the new ROM? Thanks in advance to anyone who wants to help me with this one. I'm trying to do things without having to ask for help, but sometimes being a noob has its limitations.
Anytime any of you need answers about your electrical in your house or business, I'll be glad to answer your questions. 17 years as a union journeyman electrician has taught me a few things. LOL

Full Wipe Rom should do away with the problem. Just watch as u restore apps and see if u got a bad app causing the prob.
Sent from my SAMSUNG-SGH-I897 using xda premium

[Q] blank screen after 4.1 update while in a call

Hi Guys, i just updated to 4.1 and when making a call i cannot open the phone to to use it at the same time, the screen doesn't turn on even if i have a call waiting so i cannot see who is calling me even if i press the power button. The person that i am calling should hung up so i can use the phone again. Does anyone has this problem or know any solution? never had this problem before the update

sotersot said:
Hi Guys, i just updated to 4.1 and when making a call i cannot open the phone to to use it at the same time, the screen doesn't turn on even if i have a call waiting so i cannot see who is calling me even if i press the power button. The person that i am calling should hung up so i can use the phone again. Does anyone has this problem or know any solution? never had this problem before the update
Click to expand...
Click to collapse
search search search. same issue has been reported before.
you need to re-calibrate your proximity sensor trough hidden menu. search in this sub-forum, there is a step by step guide somewhere.
edit:
here, since i'm nice:
http://forum.xda-developers.com/showthread.php?t=2013651, all thanks go to italianquadcore

many thanks i will try that

Big thanks Flying_Bear!!! I had the same problem and it really made me crazy cause I couldn't neither check contacts, calendar etc. during conversation nor end phone calls. Now everything runs smooth as it should.
Regards
Stephan