i dont like to use touch flo and would like to know if someone has found a way to disable it ?
thanks, eric
their is touchflo option in settings (under system I think), should allow you to disable it
Go to the the TODAY settings...
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
the touchflo (finger panning) option is the one i want to turn off.
i still want to keep the htc home in my today screen.
aaronsmckee said:
their is touchflo option in settings (under system I think), should allow you to disable it
Click to expand...
Click to collapse
there is only one checked box about the sound on/off when panning. no where to disable it.
I'd love to turn touchflo off. It seems pretty worthless. It scrolls a page to slowly and in PIE its hard to get it to stop when u get to a spot you want to view.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
I had followed above with soft reset also, but still the "touch flo" function running in PIE. This is pretty annoying and useless function if you used to your finger scrolling webpages with PIE plus.
Another one can helps..Thank.
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
jamespaulritter said:
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
Click to expand...
Click to collapse
Out of curiosity does that change also speed up PIE scrolling the normal way ? - cos it's super laggy and worse than TyTn in the out of the box setup.
Mike
Well if i hold my finger in the scroll bar field it will page up/down at 4 pages a second. The reg edit doesn't seem to have changed anything other than the touchflo scrolling
TouchFlO Scrolling and Sound
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
MardiG said:
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
Click to expand...
Click to collapse
Have you even looked at the settings in your tilt\Kaiser? you would have found atleast on answer to your questions just by looking around and learning your device!
I guess to each his/her own, but I personally think the TouchFLO interface is a huge improvement in usability. Perhaps it just takes some getting used to. And with TouchFLO, you can still essentially do all the things you could without TouchFLO. E.g. the scroll bars are still there to be used if you like that. And you can still use the stylus for normal operations. There seems to be some confusion about how it works so let me explain the "use cases".
The way TouchFLO works is this:
- use a finger (not your fingernail) to "drag" the screen up/down (or even left/right if the page is wider than the screen). The page should drag with your finger. It's semi-smooth. Not truly smooth, but smooth enough. When you drag, DON'T lift your finger from the screen till you've got it positioned to your desired spot.
OR
- If you use your finger (not your fingernail) to swipe up or down AND LIFT your finger fromthe screen as you do it, then the screen with scroll by itself to the end in that direction or until you tap the screen again to stop it.
OR
- if you use the stylus or your fingernail, then it will NOT scroll like above. It will then behave like a normal stylus control (highlites and selects instead of scrolling).
So, the screen reads a broad touch (like your finger) differently than a narrow/pinpoint touch (like your nail or stylus).
once I got used to it, i found it to be an excellent upgrade in the interface. I don't think it was a "feature that was rushed out the door" at all. in fact that it reads the stylus and your finger differently speaks to the idea that thought went into it.
Use it on a web page to see the different use cases. If you browse a PDF file, it'll drag even with a stylus because you can't "highlight and select" within a PDF file, so it knows that use case is invalid.
Also, You can change the sensitivity by using a reg tweak: HKLM-DRIVERS-TOUCHPANEL-PRESSURE THRESHOLD. Increase/decrease it for more/less sensitivity.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
You do realize this has nothing to do with TouchFlo ... right?
jomo25 said:
There seems to be some confusion about how it works so let me explain the "use cases".
Click to expand...
Click to collapse
Nice writeup, thanks!
Richard "Still Jonesing for a Tilt"
I wish there was a way to partially disable the Kaiser implementation of touchflo --specifically, the feature where if you drag scroll and your finger ends up at one of the edges of the screen (which is really easy on a 2.8" screen using your thumb) it goes into the continuous scrolling mode. I wish those edge regions of the screen were treated just like any other.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
Thanks from me too for this tip. I don't use TouchFLO and I found the touchscreen on my TyTN II a bit annoying with this enabled. Sometimes it wouldn't react to tapping so I had to tap twice. This was maybe one out of every three or four taps.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
jonrulezz said:
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
Click to expand...
Click to collapse
Please don't go digging in the graveyard, it disturbs the other corpses
Try going to settings>today>items>uncheck touchFlo
Hello everyone, i asked this question in the 'post your today screen' thread but got no answer so will try asking here:
I recently installed the htc home customiser and changed a few things around and generally had a play with it to see what i could create from my today screen. I then decided i was happy with how the original htc one looked so i changed it back. Unfortunately i have a slight problem.
Originally, under the htc home section i had tasks, appointments, tomtom, etc etc showin up and there was a scroll bar on the right hand side that allowed me to scroll down the list, all while keeping htc home in the same position at the top. Now though, i have a scroll bar that extends all the way up the right hand side of the screen whereas before it only went as far as the bottom of htc home. It now covers up part of the date and the sound settings button. When i scroll down my list of shortcuts, it now also scrolls htc home also. (i hope my description makes sense)
It is very annoying and also makes my home screen look ugly. Does anyone know how i can get it back to how it used to be?
thanks very much in advance!
You can fix this by updasting the registry directly. There may be another way, but off the top of my head, I don't know.
Check your entries under the registry item: HKLM/Software/Microsoft/Today/Items
Under there, you will see an entry for every Today plugin you have available in your Today settings window.
Select one and you see it has entries called:
- Enabled
- Flag
- Order
- Selectability
- Type
under each one.
- Enabled denotes if its checked for your Today screen (1 is on, 0 is off)
- Order denotes the sequence it is on the Today screen. The lower the number the higher on the screen, so usually, HTCHome is the lowest enabled since it at the top.
- Type denotes whether it is one that is "movable" or not.
Type is the one that you need to modify. Type can be 0 (moveable) or 5 (non-movable). Type 0 ones can be moved up and down in the Today settings screen, where as Type 5 ones cannot.
The issue is that if the Today screen content is too much to fit on the screen, it auto adds the scroll bar. BUT it will only make the part of the screen occupied by movable activated plugins scrollable.
Before you customized, it HTCHome was likely a Type 5, and it was Order 1 (or something low since its at top). And all others were Type 0. Thus the scrollable section DIDNT include the HTC Home. Somehow, your HTCHome type is now 0, so it is scrolling along with everything else.
Hope this helps. Of course, manually modifying the registry has inherent danges, so be careful, and I take no responsibility if you mess up (disclaimer ).
This might be configurable and modifiable via HTC HOME Customizer app itself, but not sure...I just know the above is how I would fix it if I needed to.
Cheers for that mate, i will have a look tomorrow and see if i can sort it out.
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Today screen keeps scrolling up
I don't know if this is the right post to ask, but you guys seemed pretty knowledgeable about today screen...
What happens is that whenever I scroll down (with the scroll bar) my today screen, it keeps scrolling back up to beginning screen automatically.
Only way to avoid this is to scroll all the way to the bottom and then it stops there. Then I can scroll up to see my today plugins which are in the middle (e.g. if you can scroll 4 times down - 4 screens of plugins - and I want to see my plugins which are 1 screen down the initial today screen, I have to tap all the way down and then tap up 2 times to see the plugins I should have seen tapping just 1 time).
This is so annoying. I would appreciate any help. Thanks.
shogunmark said:
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Click to expand...
Click to collapse
Hi:
This one didn't for me. The direct registry tweak did. Thanks to all you guys! xda rocks!!
shogunmark said:
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Click to expand...
Click to collapse
Hi:
This didn't do it for me. The direct registry tweak did. Thanks to all you guys! xda rocks!!
This is for mbernstein:
You hijacked the thread but since the op had his issue resolved I can offer you just a little input. I had the same problem you mention. It started after I installed a few SPB programs. I'm not sure if it was the Pocket Plus, Mobile Shell, or something else but it was definately an SPB proggie. Once I uninstalled the programs the issue went away. I'm disappointed because they are good softwares.
Thanks. This should be the case. But it is a shame as Spb softs are quite good (otherwise).
Yes, I unchecked SPB today plugins and it took a long time (right one) for the screen to go "home". thanks.
Whenever I scroll down (with the scroll bar) my today screen, it keeps scrolling back up to beginning screen automatically.
Only way to avoid this is to scroll all the way down to the bottom and then it stops there. Then I can scroll up to see my today plugins which are in the middle (e.g. if you can scroll 4 times down - 4 screens of plugins - and I want to see my plugins which are 1 screen down the initial today screen, I have to tap all the way down and then tap up 2 times to see the plugins I should have seen tapping just 1 time).
This is so annoying. It seems something preset to have the today screen always at the top (after you browse to other windows, etc.). If at least I can change the "go home" movement to take a bit longer so I can see other today's plugins it will be good enough.
I would appreciate any help.
Thanks.
This was not solved, but explained elsewhere (SPB today plugins). I guess no workaround despite disabling them. Thanks.
How can I disable the scroll sound in IE when I use the screen to scroll with my finger. I cant stand the clicking noise. I didn't see where to disable it in system sounds and have been unable to find it in the forums. Also, is there a way to disable the popup menu when you scroll using your finger in IE. Half the time the popup menu will come up or it will select text.
Thanks
Anyone have any ideas on the menu always popping up when scrolling with touchflo in IE.
i have my diamond.
first p[roblem i noticed was the sensitivity when browsing through the programs list. the first screen usually goes okay, but when i slide my finger over the second screen it chooses a program from that screen.
i used advanced config to change the sensitivity to 80.
this helps a little but.
anyone have this experience?
or has a good solution?
p.s. i found out that i have the same problem with internet browsing. if i move my finger over a page to scroll, i accidentely press it and it opens a link i do not want to see.
where are you finding that "advance" menu ???
advanced config is an application.
it is used for several tweaks. please look at the tweaks thread