I would like to cancel the WAP internet connection via the local Mobile Service Provider i.e. via simcard and make WLAN connection as the default connection for all applications like browser, YOUTUBE, Weather, Google Map, etc., This is just to avoid my unnecessary bills from mobile company for data transfer.
Could any one guide me about how to do it in HTC TOUCH DIAMOND 2?
question
do you want something to automatically start wiFi when you try to browse or just want something so that the phone doesn't connect to EDGE or 3G &c?
I use a program called NoData available from MoDaCo to disable WAP and 3G connectivity while leaving MMS enabled. I have tried to use Opera after using this program adn it does not connect to Mobile Data if there is no Wireless access.
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
EDIT: I'd like a program which starts wireless access automagically, but it's not much hassle to hit Settings > Connections > On before I start browsing...!
Related
Hi there,
I got a problem which I would like to share with you. When using skype with a GPRS conn, the program do not initiate a connection. If it is using WiFi, then it works with no problems. If I have initiated a GPRS conn with some other program, i.e. browsing with my opera browser, then skype connects with no problems to the allready initiated GPRS conn. What can cause this?
Thanks in advance.
skype over gprs?
would this even work, skype needs a broadband speed connection to work and skype do not support calls over gprs, maybe this is why
Skype will only work over wifi or 3G, it will not work over GPRS.
Radeon123 said:
Skype will only work over wifi or 3G, it will not work over GPRS.
Click to expand...
Click to collapse
3G or HSPDA - just the same. Skype do not initiate any conn. To be able to log in I must, at first, start a browser, open a page, keep the conn alive and then to log in with Skype
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Steve-C said:
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Click to expand...
Click to collapse
Yes, I have selected both WiFi and 3G and I see the screen warning me that Skype is going to use a 3G conn. The problem is that Skype do not initiate any conn, just use any if it is already initiated. WiFi conn is switched on manually by the user, not Skype. Same is with 3G - it must be initiated previously from some other program and Skype just uses it. Further more, if 3G conn is closed while using SKype, then Skype can not initiate it again. All this is too strange for me. I uninstalled Skype, deleted all files connected with it, checked registry for strings that might be in use from Skype, then installed it again and nothing changed. I have no other installed programs for handling internet connections, just those that come built in with my PPC.
I had this problem with another program that wouldn't initiate the connection. I checked my connection settings, and it was set to automatically dial MEdia Net (since i use AT&T) and I switched it to automatically dial My ISP GPRS and ever since, my programs have been dialing fine.
hey man i had the same issues i went in to conection settings and changed them to media net becouse thats what i use thats in conections then conections advanced select networks i also disabled my proxy in conections 2 and it worked for me dont know witch one of those did it for me but that should get you in the right direction
Yeah, you have to select media net as default, and disable the proxy.
The proxy is the one that's preventing you from connecting. Other programs figure it out but some don't bother and can't connect.
hey sorry if i'm hijacking ur thread but
I was curious if anyone knows about this. I'm not using a 3g connection as well. My skype gives me the option of using a "cellular" connection, but it doesn't show it connecting to my edge or gprs. I was curious as to whether anyone know if it's edge or gprs? (trying to find out if it's using minutes or whatever.. a connection besides edge n grps)
Thanks for your time
I was wondering if there was a way to disable Media Net's automatic connecting whenever I open Internet explorer. I only use wifi for the internet. I disabled it using Kaiser tweak and that worked but then I cannot recieve MMS without MEdia Net enabled. I don't have a problem with it being enabled I just don't want it to automaticly start connecting. If it cant be disabled for everything but mms I would rather have a prompt.
Thanks.
MoDaCo NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
EDIT: I should have read before posting. I'm not sure about the MMS part as I don't use the NODATA program. I was just thinking on the disabling data what I did for my moms phone. Sorry.
I tried that program and it has made it easer to enable/disable MEdia Net, but If there is a way to just make it not automatically connect that would be better. I really hate being charged for the data connection when I don't want to
Has nobody else wanted to get rid of the automatic connecting?
This is the way I disabled the automatic connection on my tilt with stock at&t rom. I don't know if it will work on other kaiser models/ roms since I'm still new with windows mobile (only had the tilt for a couple of months).
go to start>settings> connections tab.
select connections, go to advanced tab.
go to select networks.
On "programs that automatically connect to the internet should connect using:"
I changed it from MEdia NET to My Work Network (since I don't use a work network it is not set up). I also switched the second option to my work network just in case.
Since "my work network" was not set up, whenever internet explorer or any other program tries to connect, it will show a "cannot connect" error unless wifi is already activated. however I can still send/recieve MMS since the MEdia net is not disabled.
If you need to use MEdia net on IE you can just switch the opiton back to media net.
I'm still fairly new to windows mobile and my tilt, and I couldn't find a way to do this after searching for days, so i just kept messing with the connections settings until i found this. This is the first time I got a chance to help someone here so I hope it's what you're looking for!
Thanks a lot, it works great!
So I thought this worked but I relized when I make Media Net not auto connect I cannot send or recieve MMS. Is there a way to only allow messaging to auto connect and then disconnect when done?
um why dont you just go to your connection settings and delete your "my connection" its not hard
If I were to do that then I cannot send/receive MMS. That is the dilemma.
go to connections and switch it to "My ISP" and delete the gprs setting from "My ISP"
Hi all,
Got a stange issue. I have the MDAcIV (basically a diamond) on the UK T-Mobile contract.
I've setup my Gmail account to send/retrieve and over wifi it works perfectly, however if I disable my wifi connection, I expect the email to sync over GPRS, but I keep getting a sync error saying check your connections etc.
Anyway checked all my connections and it works fine over GPRS in browser, weather, and any other app requiring internet connection, just not email.
Gone through the email settings and under advanced server settings, under Network Connection it's set to "The Internet".
If I change this to "T-Mobile Internet", and then try to sync with wifi OFF, the GPRS kicks in and starts syncing.
I then stopped the GPRS connection, switched on wifi, and tried to sync again, but instead of using the connected wifi, it starts a GPRS connection.
Strange!
So in summary:
Network Connection: The Internet
WiFi OFF
GPRS ON
Sync fails over GPRS
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection
Anyone else have similar experience?
Thanks
I got a similar one:
I'm using Active Sync via HSDPA/GPRS to get my mails pushed (Exchange 2007 Server). Works like a charm and never have problems with it; used it for years with other WiMo devices.
Now, since I have my diamond (MDAc4 also) I can finally use WiFi, too. What I now experience is:
When I turn on Wifi, my cellular connection (HSDPA) stays active and when I turn it off manually via the comm manager it also turns off "PushMail" in comm manager. That basically sets active sync to "manual" instead of "when items arrive".
Though I am able to turn on push mail in comm manager again, as soon as an email arrives it starts to connect HSDPA again.
So basically I can not use wifi to save some MB of my data plan when I want to continue to get my emails. And this really sucks...
Only thing I can set up in the advanced connections in Active Sync is "Connection" where my only option is "Internet" -.- Meaning I can not differ between cellular and wifi. It kinda has to use the cellular connection...
long story short, dunno if that helps you with your problem now, sorry; but if anyone understands what I am talking about right here, maybe send me a pm or something, if you know how to fix that.
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection
Click to expand...
Click to collapse
Definitely had this happen a fair few times, with the gprs failing to connect once or twice, and I've seen it on most of the roms.
I think WM doesn't set it's connection type correctly, so we don't get the seamless "use the best/cheapest/fastest connection available"
In fact, anyone know of any app that would just do that? As in try to connect to unsecured or secured wifi, followed by 3G/HSDPA, followed by GPRS?
patelr said:
Network Connection: The Internet
WiFi OFF
GPRS ON
Sync fails over GPRS
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection
Anyone else have similar experience?
Click to expand...
Click to collapse
I have exactly the same problem. If I want to get my e-mail the account setting has to be "T-Mobile Internet" unless I'm using wi-fi in which case I have to switch it to be "The Internet". Anyone know of a solution?
Is it possible that T-mobile are forcing you to use your Data connection rather than free Wifi ?
Hmmm nerf maybe?
TJ72 said:
Is it possible that T-mobile are forcing you to use your Data connection rather than free Wifi ?
Hmmm nerf maybe?
Click to expand...
Click to collapse
Thanks for the reply. It could be but the phone doesn't even attempt to connect to mobile data it just pops up an error to say it can't connect with the existing data settings. Its not a T-mobile supplied handset although it did configure itself to use T-Mobile when I first put the SIM in.
Solution
After research and research I´ve finally found a solution. I´ll post some pictures of my settings so you can see yourself what you have to do.
The clou is to have only 1 connection for Wifi and GPRS/3G. WM now firstly checks if there is a Wifi connection and if not, it will connect to GPRS.
Got It
Just untick the box that says "This network uses a proxy server to connect to the internet" in the manage t-mobile Internet connections app.
Now works over Wifi if available, if not uses GPRS/3G
Hi all,
It has always bugged me that I am not sure whether or not I am browsing the web using my data package or wifi.
However, I have a 250mb a month data package that I have never come close to using so have never let it worry me too much.
However, yesterday I installed the iplayer application for the diamond. When I use it I want to ensure that I am connected to wifi and not using my data plan.
I downloaded a little app called ‘nodata’ which allows me to toggle on/off all the data connections on my phone, but when I browse the web and check my IP, it still shows my ISP as Orange (my mobile provider).
How can I ENSURE that my data connection is wifi?
Search a program called nodata it lets you turn off data connections
the data connection icons look different when you are using wifi compared to gprs
I can not connect to the internet with the WiFi on my Tilt 2.
Configure a new Connection in Start> Settings> Connections> Connections (so do not take the GPRS or 3G)
My connection at work using Proxy (I added the Connection Proxy to create "Internet")
I try to browse with IE or Opera and not connected.
I tried to connect to open wireless mall and I could not surf the Internet (no proxy settings or IPs).
Synchronize Tilt 2 with the PC (via ActiveSync) and if you can navigate (because when you synchronize the PC, shares the Internet)
Does anyone know why this happens?
I have read that is related to the configuration of the power (battery power), Is it true?
THANK YOU.