Database Develop

what is haykuro death spl

I use hard spl. But some roms are for death spl. Any advantage. To using it?

as far as i know, it is the spl from the magic/sapphire and it frees up more space in /system and /data and i would assume takes some from /cache.
since it clears up more space in /system it allows you store more stuff in there which is what the hero roms do.
the advantage is more space in /system and /data
according to your sig you have the danger spl which is the 1.33.2005 spl, i am confused

Thanks. Can you point me to more info. Id like to try it.

ahronzombi said:
Thanks. Can you point me to more info. Id like to try it.
Click to expand...
Click to collapse
you still confuse me with your sig, boot your phone up with camera and power and tell me what is displayed there for the numbers above radio.

ahronzombi said:
Thanks. Can you point me to more info. Id like to try it.
Click to expand...
Click to collapse
Search some please. This SPL can brick your phone and some top notches around here have even bricked their brand new phones after getting a replacement because they have just bricked their last phone.
Besides, I think most hero roms use apps2sd so you don't need the death/danger SPL. (off the top of my head)

My advice is to only flash the "Danger SPL" if you intend on trying Hero.
Otherwise just use Hard SPL.
You can use the link in my signature if you wish to proceed.
However you will not be able to flash any nandroid system.img backups on top of that SPL which means that once you flash that SPL you need to start with a wipe and a fresh ROM. You can always flash your userdata with fastboot afterwards to restore your data.
Things you may want to get before starting:
Latest radio (MUST!)
Cyanogen's 1.4 Recovery
Full ROM update (ie Cyanogen's 4.0.4 rom)
Partition your class 6 (suggested) sdcard to FAT32/EXT3/Linux-Swap (type 1) for HERO roms.
Yes it's a lot of work for a noob but it's worth it as long as you don't brick your phone (high risk if you don't follow instructions).

southsko said:
Search some please. This SPL can brick your phone and some top notches around here have even bricked their brand new phones after getting a replacement because they have just bricked their last phone.
Besides, I think most hero roms use apps2sd so you don't need the death/danger SPL. (off the top of my head)
Click to expand...
Click to collapse
You're incorrect, the hero app and app_s folder are on the SD but the system remains in NAND. The Hero system is too large to fit with Hard or Eng SPL and the Haykuro SPL is a necessity.

If you wish to experience a Hero build without using the death spl, you can use the one of the Micro Hero builds at
http://forum.xda-developers.com/showthread.php?t=561179

1 Click Rooting...

Ok I've done the 1 Click Root process. The problem is, I totally UNrooted my phone before I did the 1 click root. I tried to load a Hero rom I got off the www.theunlockr.com website but I had to update the SPL which bricked my phone. I did wipe first so thats not the problem. I don't know what went wrong when I bricked my phone. I am getting a new from t-mobile(I kinda told them the donut 1.6 update screwed my phone up).
Now I want to root again with the 1 click but do I need to go back to the original build RC29 build or whatever it was in order to root with the 1 click ? And when I flash to a new rom do I need to update the SPL again?

READ FIRST!! I dont know where so search. I dont feel like finding you all the guides warnings and post about it. There are many precautions to take while flashing hero and even if you follow all of them to the "T" you still have a big chance of bricking your phone so use the Search Bar

nickryan0612 said:
READ FIRST!! I dont know where so search. I dont feel like finding you all the guides warnings and post about it. There are many precautions to take while flashing hero and even if you follow all of them to the "T" you still have a big chance of bricking your phone so use the Search Bar
Click to expand...
Click to collapse
The thing is I've flashed all sorts of rom's before, but I wanted to try the 1 click rooting process. I think what happened is I flashed the SPL before I flashed the updated radio. I was doing some research on the whole thing. I flashed the SPL first.

if you use the DREAIMG.nbh to go back to rc-29, it is really easier to use the telnet commands then it is to root with the one click imo, you can use one-click root, but you have to find the newer version of the recovery flasher, and if you use it and don't flash a custom rom, then the system will overwrite the custom recovery image with the stock one. if you use the telnet commands then you will overwrite the stock recovery image with a custom one, so the telnet commands are more stable
to update your spl, make sure you have a pvt board in bootloader (camera and power) and that your radio is 2.22.19.26I (make sure you have that radio, not just assume after you flash it) then you can get rid of all the user error in flashing the 1.33.2005 SPL.

xOneSainTx said:
The thing is I've flashed all sorts of rom's before, but I wanted to try the 1 click rooting process. I think what happened is I flashed the SPL before I flashed the updated radio. I was doing some research on the whole thing. I flashed the SPL first.
Click to expand...
Click to collapse
Were you already rooted when you did the 1 click root? - if you were then that might have been were the mess up happened because once you do the one click root you have to flash a rom (probabably cyanogen would be best) to continue or you lose root.
Following that question if you were already rooted and had hard spl and new radio - the one click might have cause you to lose that.
You have to flash from hard spl to danger spl
Radio should be newest or second to newest
Also it is said to flash hero rom right after flashing spl. - Which means not turning off your phone or rebooting after flashing
- I saw a video were they were at the rainbow boot screen and they flashed the Danger Spl and then inserted a new sd card that had hero and flashed it without rebooting.
Read up more on this

is one click still ok ?
I've had my G1 for about a yr now. Watching the mods grow . Never had thought about rooting just because I didn't want to have to keep changing to keep up to date. Then the one click came out and it was time. Ordered my 8gig class6 sd and before I got it Google did this C&D to CY. I see people saying they are doing the 1 click method and the links they put on are before the C&D. Can it still work ? Also everyone who tries to give directions how to get root and roms are different. Even this thread has been changed or something was left out. Is there a true one click method ? I tried theUnlockr way 3 times and I still wound upwith a wiped phone. Please Help Me ...

nPHILLY said:
I've had my G1 for about a yr now. Watching the mods grow . Never had thought about rooting just because I didn't want to have to keep changing to keep up to date. Then the one click came out and it was time. Ordered my 8gig class6 sd and before I got it Google did this C&D to CY. I see people saying they are doing the 1 click method and the links they put on are before the C&D. Can it still work ? Also everyone who tries to give directions how to get root and roms are different. Even this thread has been changed or something was left out. Is there a true one click method ? I tried theUnlockr way 3 times and I still wound upwith a wiped phone. Please Help Me ...
Click to expand...
Click to collapse
one click will not work in donut 1.6. it will be patched, there is a thorough guide in my sig. i also have links i can give you for cm 4.0.4 and 4.1.11.1 if you want them.

1-click root only works with CRC1 and lower. Personally, I prefer to downgrade to RC29 and manually root it. I've done it about 20 times that way and have never once had an issue. In fact, I did it last night and today that way and both phones are rooted with Hero ROMs and running perfectly.
My advice, find a good tutorial (there are plenty, particularly the stickies on XDA on the subject) and download all necessary files ahead of time so that you aren't stuck in the middle of rooting looking for a file. If you want to flash the update "Danger" SPL, there is a combination radio/spl so that bricking is less likely. Search XDA for it. Also, check if you have PVT board first (camera+power). If not, brick it you will (or more than likely will). If I had to guess the main reason for problems and bricks it is that people rush the process and skip steps because they started the process without reading the whole tutorial.

nickryan0612 said:
Were you already rooted when you did the 1 click root? - if you were then that might have been were the mess up happened because once you do the one click root you have to flash a rom (probabably cyanogen would be best) to continue or you lose root.
Following that question if you were already rooted and had hard spl and new radio - the one click might have cause you to lose that.
You have to flash from hard spl to danger spl
Radio should be newest or second to newest
Also it is said to flash hero rom right after flashing spl. - Which means not turning off your phone or rebooting after flashing
- I saw a video were they were at the rainbow boot screen and they flashed the Danger Spl and then inserted a new sd card that had hero and flashed it without rebooting.
Read up more on this
Click to expand...
Click to collapse
I was rooted before I did the one click but I downgraded to RC29 with DREAIMG.nbh file. I did the 1 click process fine. I figured that what fxcked up my phone is that i flashed the custom SPL before I flashed the new radio first. I'm pretty sure thats what messed it up. I wanted to the Amon Ra's Recovery image and I didn't know how install that with out doing the 1 click root process.

ya if you flash spl before raidio that's what messed you up ! always radio first then spl . but you know that now .can you get in recovery at all ?

lucky 69 said:
ya if you flash spl before raidio that's what messed you up ! always radio first then spl . but you know that now .can you get in recovery at all ?
Click to expand...
Click to collapse
No I can't get passed the G1 boot screen. Its ok though T-Mo is sending me a "LIKE NEW" G1. I told them the donut update screwed my phone up. I can't believe I did the SPL first but its a mistake that could have cost me more then a 19.95 delivery fee that IS being waived by T-Mo.
But heres the question with 1 click root do I need to downgrade to RC29 or no?

xOneSainTx said:
No I can't get passed the G1 boot screen. Its ok though T-Mo is sending me a "LIKE NEW" G1. I told them the donut update screwed my phone up. I can't believe I did the SPL first but its a mistake that could have cost me more then a 19.95 delivery fee that IS being waived by T-Mo.
But heres the question with 1 click root do I need to downgrade to RC29 or no?
Click to expand...
Click to collapse
no just be on stock cupcake and use the 1 click root. Then when you did that go into recovery and flash a rom that is not hero or requires danger spl

nickryan0612 said:
no just be on stock cupcake and use the 1 click root. Then when you did that go into recovery and flash a rom that is not hero or requires danger spl
Click to expand...
Click to collapse
Sounds good. Before screwing things up I always had good success in flashing roms trying multiple roms in a day. My favorite is the xRom. I am curious to see if eventually there will be a Cliq rom.

quick question with fastboot

I apparently screwed some things up in my attempt to upgrade to Cyanogenmod 4.1.99 so I can move to 4.2.3. . . anyway, I now have the HTC bootloader up with fastboot, the standard Android recovery, and HTC ADP 1.6 DRC83 firmware installed, and its up and running. I don't have root, and I am completely lost as to how to get root back, get cm-recovery 1.4 back, and from there, I should be ok...
I do have DREAMING.nbh on my sd, and when i go into fastboot(pwr+camera) It gives me a list:
Parsing. . .[DREAMING.nbh]
[1] BOOTLOADER
[2] RECOVERY
[3] BOOT
[4] SPLASH1
[5] SYSTEM
[6] USERDATA
[7] RADIO_V2
Do you want to start update?
<ACTION> Yes
<Power> No
This is where I don't know if I should do anything without advice, as I don't want to brick my G1 any further
Anyone care to help out?

if you messed up like i did a few months back , and lost root because you flashed the htc recovery image and didn't flash cyan's rom on top of it then...i can help. i'm assuming you lost root on your rom because of that, and when you rebooted it took out cyan's recovery image as well, so you can no longer flash anything else into your phone. Alright! first thing's first, is we need to have a look at what spl you're using, take out that dreaming.nbh file from your sd, you won't need it, instead, put on a recovery image like cyanogen's 1.4 or amon ra's 1.2.3 (i suggest the latter)
anyways , you're gonna have to have the hard spl/ engineering spl/ or the haykuro "death/danger" spl installed on your phone. I'm going to assume you have at least one of these, because if you don't and you have the stock spl that's a different story. If you have the stock spl for some reason, you are gonna have to downgrade your phone like you did when you first got root. Research the forums , there are loads of guides on how to downgrade your phone, go to the section that specifically talks about using the bootloader to restore the dreaming.nbh file.
if you do have either the hardspl, death, or engineering's spl,
you need to search the forums on how to use fastboot and adb
you're gonna need to push the recovery image file (cyan's or amon_ra's)
into your phone and wahpow!
you're in the green, once you have the recovery image back in the phone, you can boot into it and flash w.e the hell you want

phamous said:
if you messed up like i did a few months back , and lost root because you flashed the htc recovery image and didn't flash cyan's rom on top of it then...i can help. i'm assuming you lost root on your rom because of that, and when you rebooted it took out cyan's recovery image as well, so you can no longer flash anything else into your phone. Alright! first thing's first, is we need to have a look at what spl you're using, take out that dreaming.nbh file from your sd, you won't need it, instead, put on a recovery image like cyanogen's 1.4 or amon ra's 1.2.3 (i suggest the latter)
Click to expand...
Click to collapse
You hit the nail on the head!
phamous said:
anyways , you're gonna have to have the hard spl/ engineering spl/ or the haykuro "death/danger" spl installed on your phone. I'm going to assume you have at least one of these, because if you don't and you have the stock spl that's a different story. If you have the stock spl for some reason, you are gonna have to downgrade your phone like you did when you first got root. Research the forums , there are loads of guides on how to downgrade your phone, go to the section that specifically talks about using the bootloader to restore the dreaming.nbh file.
if you do have either the hardspl, death, or engineering's spl,
you need to search the forums on how to use fastboot and adb
you're gonna need to push the recovery image file (cyan's or amon_ra's)
into your phone and wahpow!
you're in the green, once you have the recovery image back in the phone, you can boot into it and flash w.e the hell you want
Click to expand...
Click to collapse
I know that I had HardSPL on at one time, would everything that has happened somehow remove it, and how can I check if its still there?
I will likely use Cyanogen's recovery. If possible, link me to a good "howto" on loading Cyanogen from Fastboot.

alright, to check what spl you have, turn off your phone and hold camera and the power on button,
you'll go into your bootloader, and it will display what spl you're running
it's been a while since i remember what numbers belong to what spl, but as long as you don't see the multicolored spl, and you see like three little android bugs on the bottom, you're good to go
uhm i kinda saved random links to things that i used, you're gonna have to read all these documents and learn all about adb, it's worth it in the long run, and there's no better time to learn it now since it's your only hope of getting root back.
http://androidcommunity.com/forums/f10/adb-fastboot-for-rookies-18124/
http://forum.xda-developers.com/showthread.php?t=502010
BUT ANYWAYS
OMG i just found the best guide to your problem right here
http://wiki.cyanogenmod.com/index.php/RE-recovery-img
^^ that is GOLD!
hope this helps buddy!

DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
Apr 20 2009, 15:30:43
Thats all it gives me, but there are 3 Androids on skateboards at the bottom, and its a all white screen.
I cant seem to get the SDK to work, let alone install on my PC here(Damnit Vista, I can't wait for my copy of Win7 Pro to get here!!!!) so I might just let it charge up overnight, check here in the morning and give it a whirl on my laptop with XP. Hopefully, I can get this all taken care of. You have been a world of help so far. Just keep an eye out for some updates here tomorrow.

SAME HERE wow, couldn't get the damn sdk to work on vista either
GO XP
that's what i did, worked instantly, find someone with xp and ask them to let you borrow it for about an hour
----
you have an appropriate spl btw, it'll be able to fastboot correctly
in the meantime, i'd read up on those links i sent you, especially the last one,
and you'll be good!
goodluck!

ok, looks like I got the SDK to work on here, and I have it updating right now. Its first update was the USB driver. If anyone has some time, and wants to send me a IM over AIM to help me out with this, please IM me.
I am going to let this update, and then hope that I can get it to flash cm-recovery back onto the phone.

cm-recovery 1.4 is BACK! OK! AWESOME
god this had me abit scared.
Ok, back to the prior task at hand. at this point, can I update to CyanogenMod 4.1.99 then update to 4.2.3, or can I update this directly to 4.2.3?

ok, you cant update directly to 4.2.3 XD

Ok, awesome, ive got cm-recovery 1.4, and Cyanogenmod 4.2.3.1 up and running. Time to give Cyanogen some credit. this firmware is FAST!
Also, I want to thank everyone that has helped out with my issue. you are all worthy of a beer...I just aint got any money to pay for a beer for you all right now XD

Upgrading to Haykuro SPL

I am looking into upgrading to the Haykuro SPL since it works for all ROMs and the HardSPL doesn't work for all ROMs, but I am worried about bricking. According to what I've read, and on Haykuro's website, I need to
1. Flash Latest Radio
2. Flash Special SPL
I've already flashed the new radio, do I need to do it again then flash the SPL back to back, or am I OK since I already have the radio.
I just want to do it right so I don't brick.
Thanks.

which radio did you flash? htc or haykuro?
you should flash the haykuro radio again just to be safe, but it doesnt have to be back to back as long as you have the haykuro radio. Make sure its the 26I radio by booting into the spl

that's the one 26I, but I made do it again just to make sure. Will not hurt huh? Thanks

raptoro07 said:
that's the one 26I, but I made do it again just to make sure. Will not hurt huh? Thanks
Click to expand...
Click to collapse
Flash it again if you wan't, personally I wouldn't. No reason to, and every time you flash the Radio or SPL, whether you meet the requirements or not there's always a tiny, minute chance something could go wrong.
As long as you have the 26i radio, you'll be fine.
If you're using cyans recovery make sure you flash it using alt-s then reboot using home+back. Do NOT touch the trackball, if you don't use alt-s, home+back it will not be flashed correctly. It won't brick, it just simply won't install.
Good luck, you'll be fine. I spent over an hour flashing Danger because I was sh*ting myself worrying about bricking, but it went fine
Afterwards you wont we able to boot the phone because the nand has been formatted and partitioned. If you boot in to recovery and type 'ums_enable' you will be able to copy a rom to your SD card, then 'ums_disable' to unmount.
That alt-s, home+back thingmajig only applies for radios and SPLs, nothing else.

Well the reason i told him to flash the radio again is because some people are actually bricking when using the stock 26I radio. IDK if its cause they are noob or because there is some problem with it, so its safer to reflash.

Hey Dookie (NCSU here), are you just dying to flash a hero rom or something? I'm not certain if it is true, but I read if you flash the Danger SPL, you may be stuck with that one and not be able to flash another.
I'd be cautious, hero is not worth being stuck with that SPL or a brick in my opinion.

you can revert the SPL, nothing is keeping it tied it on there

Stuck at G1 Screening

Ok so lets start out by saying i know i am not bricked because i am able to get into fastboot as well as recovery. So this all started when i tried to move to CyanogenMod v4.2.13 . At 1st i was on Cyanongen 4.2.10 which i was having some problems on so i wanted to move to a new rom. I then went to flash xROM Eclair-v1.0 which went ok but then i started to get FCs and wanted to go back to Cyanogen roms. I then flashed the 4.2.13 rom and i am where i am not. Every time i have tried to re flash the the rom i have done a full wipe of both the phone and the EXT, but i get stuck on the G1 screen every time no matter what. I have let it seat there for 30 mins with no luck at all. Not sure what to try now. Any ideas would be great.
Here is what i am running right now.
Fastboot reads
Dream PVT 32B ENG S-Off
Hboot-1.33.2005
Radio-2.22.19.26I
I am running the RA recovery RA-Dream-v1.5.1
Any help would be great thanks.

Have you tried to downgrade with dream.nhg and reroot ? I'm sure therebis better method then this too I'm jus throwing idea out there would wait for this and some one with more experince to help out.
Also did you flash the 1.6 ota before cyan rom, just trying make it clear for future questions.. Also try a different rom suggest trying superd 1.2 it's super fast and very stable

No don't downgrade using dream.nbh it will downgrade the radio and kill your phone!
You already have the DangerSPL installed, so you can't downgrade the radio anymore.
Just try to flash a ROM which was made for the DangerSPL (also called DeathSPL, HaykuroSPL etc.)

Same problem-FREAKING OUT
Hi,
I think I have the same problem and I think my phone is bricked. A long time ago I changed the two splash screen pictures and not I can't event get past the first 1. I'm stuck at the first splash screen.
I just learned that everytime you want to flash cyan, you have to flash the radio 1.6, wipe then falsh the cyan rom. I think I did some mis steps and effed it up. PLEASE HELP.
I think I have the Danger SPL that sats Dream PVT 32B ENG S-Off, HBOOT 1.33.2005 (DREA10000), CPLD_4, Radio 2.22.19.26I, Apr 20 2009,15:30:43. I have JF 1.42 recovery and been trying to update to Cm recovery1.4 but have had no luck because of these problems.
How do you flash a rom from the SPL screen with the three android on skateboards. I just need to figure this out please.
IS MY PHONE DEAD?

hbguy said:
Hi,
I think I have the same problem and I think my phone is bricked. A long time ago I changed the two splash screen pictures and not I can't event get past the first 1. I'm stuck at the first splash screen.
I just learned that everytime you want to flash cyan, you have to flash the radio 1.6, wipe then falsh the cyan rom. I think I did some mis steps and effed it up. PLEASE HELP.
Click to expand...
Click to collapse
Where did you read that... It's not true.
And no - your phone is most likely not "dead."

oh phew! what should I do now tho? I just hit camera and power and then hit back and reset the device by pushing send and that worked but now it won't start again.
Should I wipe and try the same spl thing again?

x2phantom said:
No don't downgrade using dream.nbh it will downgrade the radio and kill your phone!
You already have the DangerSPL installed, so you can't downgrade the radio anymore.
Just try to flash a ROM which was made for the DangerSPL (also called DeathSPL, HaykuroSPL etc.)
Click to expand...
Click to collapse
Wow thanks for saying thatt I did not see that danger spl was flashed! Good catch! So yes don't downgrade! I'm sure you can flash orinial spl again too..
What you can try is super d 1.6 that requires "danger spl"

how do we go about getting a super d 1.6? what is that?

hbguy said:
oh phew! what should I do now tho? I just hit camera and power and then hit back and reset the device by pushing send and that worked but now it won't start again.
Should I wipe and try the same spl thing again?
Click to expand...
Click to collapse
To access recovery, hold Home + Power.
If you have a ROM on your SD card (the root), flash it (ALT + S i think it is.) If your ROM requires a wipe, ALT + W wipes.
Make sure you have the right Radio + SPL for whatever ROM you run.

JGo to the develop forums and look for super d 1.6 rom.. and flash it like any other rom.. wipe factory reset then flash any zip it requires danger spl so should for those that have it.. like said its really good and pretty well stable and blazing fast
http://forum.xda-developers.com/showthread.php?t=613809

Oh i had a question,
when i take my sd card out and then go to the spl and reset the device, it worked. does that mean that there is something wrong with my sd card? If so do you know where there are instructions to reformat it?

hbguy said:
Oh i had a question,
when i take my sd card out and then go to the spl and reset the device, it worked. does that mean that there is something wrong with my sd card? If so do you know where there are instructions to reformat it?
Click to expand...
Click to collapse
So you get passed the G1 screen? If you have a extra sd card that's not partation use that to flash your rom(make sure it'd formated to fat32) then when you get into a rom put your partation sd back in then go to settings and format sd card there then go into recovery Amon ra and repartation sd.. Jus a suggestion too you can reformat within recovery too I jus don't kno the commands

Well what i have been trying is to get 4.2.8 back since that has been the best rom i think Cyanogen has had out, but that doesn't even work when it has always been my backup rom. Well I am about to try Super D 1.6 will report back after it.
Edit: Well SuperD 1.6 flashed good and is running but why is it that no mater how many times i try i can't get CyanogenMod to flash ok when i was able to do it before.

Ooo I liked cyan roms but notice some lags after awhile use superd is great and well worth trying it

I figured it OUT! I think my sd card was courrupted or something because it wouldn't boot with the card in but when I took it out and booted using the Danger SPL like I described a few posts back, it worked and got past the first boot screen.
Then I flash cm_recovery_1.4.img but leaving it on the sd and reinserting the sd card when the phone booted. (Oh and I flashed cm 4.2.9.1 because I heard its the most stable)
Next I reformated my sdcard and then partitioned it using the following instructions from this thread: http://forum.xda-developers.com/showthread.php?t=534714&highlight=partition+sd
Hope this helps anyone who has same problem. THANK YOU ILOST! Is yours working now too?

Forget the thread all is well again with Cyanogen Roms working. Turns out my SD card needed to be repartitioned but since i was at school all day. I wasn't able to get on a PC and download the ROM. Wonder why the card needed to be repartitioned, but whatever it works now thanks for taking the time to read the thread.

just flash the base rom then flash cyanogen!!!! or flash dwang!!!!!

Nice to hear PROD, I think you had the same problem that I had.
OKAY, now since I've been reflashing like crazy and lost ALL my old apps and imformation since I was using JF 1.5 before.
However, I backed up on nandroid before all this craze, does anyone know how to replace certain files like password safe or shipping list apps and daat on a new nandroid backup so then essentially all my old information can be on this new platform???

Well glad to see both you got working again! Congrats! Hope all will stat well I had this same problem continously. And I believe it's due to cheap / low class sdcards.. Usually when I flash from a different rom and I need to wipe, usually backup what's on sd and apps using titanium backup then format sdcard within phone the flash new rom after I repart it

Congrats to you ilost, you got this thread going well.
I used my backup but when I use that or nandroid then it replaces my recovery back to the old JF recovery and then I'm back at square one so I'm looking for a way to replace or insert certain old nandroid files into a new nandroid file.