Database Develop

[help] my x1 is stuck in the bootloader

Hello everyone,
I would really appreciate some help as i have got my x1 stuck in the bootloader...
this happened because i tried to hardspl my phone with the microsd method, and it is now stuck in a continuous loop of updating through the bootloader ...
i know this was a retarded thing to do but i recently built a custom pc which i spent over my budget on, so could not afford a legitimate copy of a windows OS, so i am temporarily using a pirate copy....
because i am using the pirate windows OS i cannot download Windows Mobile Device Centre and therefore cannot activesync my x1, and cannot hardspl or flash my x1 by usb cable...
so i thought modifying the "flash with microsd card" method to "hardspl with microsd card" could work, so i extracted the ruu_signed.nbh from the hardspl file, and changed the file name to Kovsimg.nbh, then copied it to the root of the x1's sd card, entered the bootloader, and accepted to update the image with the kovsimg.nbh file, the update progress bar reaches 100% then the phone reboots back to the bootloader and the image updates, tehn rerboots, this happens continuously...
thanks for any help in advance

btw i have tried hardreseting and softreseting, removing the battery, removing the sd card

HardSPL is the only thing we can't flash with microSD method!
Try to flash stock rom with microSD method and maybe your X1 will work again
If it works, do not try anymore to flash your SPL with microSD method

flext said:
btw i have tried hardreseting and softreseting, removing the battery, removing the sd card
Click to expand...
Click to collapse
try mitty..seach the hardspl thread

thanks for your advice, but i have succesful flashed a custom rom, by changing the .nbh file (hardspl) to the .nbh file (custom rom) then flashed through the bootloader

My htc hd not loading OS

Hi, my htc hd starts with 'smart mobility R1.14.25.24
D1.59.48753' and goes to windows version 6.1 initial screen (preparing for first use), then restarts again. I checked the boot loader screen and it comes with
blac100 32m
spl -1.54.0000
microp-blackstone led v6.
I did try to do USPL v2.5, i get the message 'usb port can not be opened'.Would someone please help to get my phone working? Really appriciate any help.

Hi,
Maybe try to flash with other rom, using SD card.

valanxda said:
Hi, my htc hd starts with 'smart mobility R1.14.25.24
D1.59.48753' and goes to windows version 6.1 initial screen (preparing for first use), then restarts again. I checked the boot loader screen and it comes with
blac100 32m
spl -1.54.0000
microp-blackstone led v6.
I did try to do USPL v2.5, i get the message 'usb port can not be opened'.Would someone please help to get my phone working? Really appriciate any help.
Click to expand...
Click to collapse
Put your phone into its bootloader and try to run USPL.exe. Did you remember to disable antivirus?

Fallen Spartan said:
Put your phone into its bootloader and try to run USPL.exe. Did you remember to disable antivirus?
Click to expand...
Click to collapse
Thanks. I did disable the antivirus. still not working.
Yesterday I tried orange ROM 'OrangeUK_HTCTouchHD_1.59.61.2_Radio_52.64.25.34_1.14.25.24_Ship_phone_software', hoping it would make the phone working. The update was successful, but the same problem.

valanxda said:
Thanks. I did disable the antivirus. still not working.
Yesterday I tried orange ROM 'OrangeUK_HTCTouchHD_1.59.61.2_Radio_52.64.25.34_1.14.25.24_Ship_phone_software', hoping it would make the phone working. The update was successful, but the same problem.
Click to expand...
Click to collapse
Try to install a newer version of the HSPL.

If you can't get USPL to work, have you tried HSPL? Your using a rom based on 1.56+ so you'll need to use HSPL 1.56

I just tried HSPL. I followed the thread http://forum.xda-developers.com/showthread.php?t=505377. Flashing for dummies. When I run the first step 'HSPLWrapper_Blackstone_156OliNex', it sits on 0% for long time and finaly came up with error msg. I tried the option 'recovery', but no use. I have done a hard reset. Still same position where it started. . I'm very sad now..

valanxda said:
I just tried HSPL. I followed the thread http://forum.xda-developers.com/showthread.php?t=505377. Flashing for dummies. When I run the first step 'HSPLWrapper_Blackstone_156OliNex', it sits on 0% for long time and finaly came up with error msg. I tried the option 'recovery', but no use. I have done a hard reset. Still same position where it started. . I'm very sad now..
Click to expand...
Click to collapse
What error message do you get? There should be an error code eg 260 or 262 etc. The different errors have different meanings and different solutions to fix them.

Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.

valanxda said:
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
Click to expand...
Click to collapse
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.

valanxda said:
Update error (262). The ROM Update Utility has encountered a communication error during the update process.
I thought I could do the manual option. But hd doesnt go beyond the first windows screen.
Click to expand...
Click to collapse
Error 262 is a very common error.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
Try to reboot and try to rerun a few times. If this doesn't work you will need to run the manual sspl.
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* If bootloader now shows 1.56.olinex you can then flash to your new rom.
Click to expand...
Click to collapse
When you say you tried the manual solution is this what you meant. You may need to reflash to your stock (original) rom first and then run manual sspl from there.
As this is now becoming a flashing problem, please post further responses in the Dummies Guide thread and I'll help you there. This thread will probably be closed soon.

As per post above, please post in dummies guide thread
Thread closed

[Q] HTC Touch Diamond 2, not flashing

Dear Honorable Seniors, I am so obsessed to get some troubles with my htc (Touch Diamond 2).
I want to get rid off from my ROM that is already available on it (I dont how to find it is official or cooked and which is that version or name). I try to download many cooked ROMs to flash but tried two:
1-energy
2-mozart
but everytime flashing process stopped at 0% percent and after 6-7mint it display a window for recovery. I do restart my system and got the prior windows version, no flashing at all.
I thought there may be Hard-SPL issue (although I dont know what is it). I download its compatible version and try to flash Hard-SPL it also stuck at 0% and not moving upwards.
Help will be appreciated in their respect.
Sorry if my english not comprehendable I am not english speaking person.
regards,
Muqaddas Shahzad
[email protected]
+923222000048

1. Install HSPL. Follow instructions in the thread.
2. Install custom ROM.
You cannot install a ROM until you have installed HSPL first.

I think Muqaddas has already tried HSPL as he described in the post, but the progress stuck @ 0%.
Muqaddas, may be you can try below:
- Disable antivirus software, temporarily, on your PC
- Do HSPL (1.83 and update to 2.51)
- Use Advance ROM Update Utility to do a Task 29.
- Upgrade to latest Radio ROM, if not latest.
- Flash the ROM you wanted.
Hope this will help you .
Thanks.

dear prabhat thank to reply me dear:
1-during Hard spl I found my version is already about 2.16.415.3 and the version I got from Hard-spl link (your given) is showing 1.83.OliNex, yet I tried with this but again stuck at 0% (error code---262)......Can yoy please tell me how Can I check That my cell is already did hard-spl on it-----and how to know it is CID-Unlocked...............
2-by using Advance ROM Update utility, it also not being flashed and giving the same error 0% (code-262)
may this because of my PC operating system which is Windows 7?
but I have flashed HTC Touch Diamond in the same system.....
please help me, my already OS disturbing me alot.
i-windows (send-don't error)

muqaddas_dunyatv said:
please help me, my already OS disturbing me alot.
i-windows (send-don't error)
Click to expand...
Click to collapse
WIN7 could be your issue, it is best to use XP. Also it is important to install the enablenewrapi.cab
You can check your SPL level by entering bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a suffix.
How to flash?
RUU.exe method;
1. Download enablenewrapi.cab, copy to your device with ActiveSync (WMDC) and execute the cab.
2. Download Topaz_CustomRUU_v1.1.zip and both the 1.83 and 2.51 HSPL files.
3. Place the CustomRUU.exe and the RUU_Signed.nbh file from the 1.83 version into the same folder on your PC.
4. With your device sync'd, run the CustomRUU.exe and follow the prompts on your PC.
5. If successful, the progress bar will go to 100% and you can enter bootloader mode (holding Volume Down as device reboots until you get to the tri-colored screen)to verify that your SPL: version has "Olinex" as a sufffix.
If so, you've successfully flashed HSPL.
Repeat steps 3-5 for 2.51
If unsuccessful....
SD Card Method;
1. Rename the RUU_Signed.nbh to TOPAIMG.nbh and place on the root of your FAT32 formatted SD card.
2. Enter bootloader mode and it should initiate the flash. You may get an error of "No Image Found" or you get progress bar stuck at 0%. This would be a failed flash, just soft reset and you'll be back to stock.
If still unsuccessful....
Try the HardSPL_V5_00R5_183HSPL.zip

my respectable serniors please help me out, I tried to change the PC which has Windows XP, and followed all the procedures you all honored but still stock on 0%.....
dear I try to flash PHOTON ROM through storage card by renaming it and placing it into the root of SD card but not being flashed................
please help

HI Muqaddas,
The issue seems to be somewhere in HSPL and the device is not ready for any custom ROM yet. I dont think PC OS has anything to do here unless the "Antivirus S/W is disabled".
Once you device is CID unlocked you should able to install any ROM .
But as you are telling you can see "1.83.OliNex" in the Bootloader... so Can you try to update that to 2.51 and see if that work?
Also try searching the "error code---262" in the HSPL thread, whihc may give you some idea...
EDIT:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
As you said you can see the OliNex in bootloader your device is CID unlocked.
Can you try below and see if that work:
1) Upgrade your HSPL to 2.51.
2) Start Windows Mobile Device Center
3) Start your device in TriColor boot loader mode.
3) Connect you USB to PC and and make sure your device bootloader white screen say "USB"
4) Now start flashing from PC using RUU.
See if this work else try "SD Card Method" suggested by Bruce.
Hope this will help...
Thanks.

On Ur phone go to Settings-> Connections -> USB to PC & "uncheck" the option Enable faster data synchronization & then try ...worked for me

I am sorry to be desperate but after following all the precedures suggested in this place I am not successful...
I was hopefull that I might flash my TOPAZ after getting 512mb card and after many struggles I arranged it for flashing .....
but after bootloader it stuched at
loading.....
please help if someone can

Try restoring your bootloader to the stock, flash a Windows stock ROM, then come back with HSPL and custom ROM.

Hey, May be you can go to service center near to you and ask them to install new ROM so that they will install new ROM and may be try to unlock the phone if it is with them...
Once they install new ROM then I think you can continue HSPL here and have fun .
Thanks.

Dear Hamsn, Where I can get Windows stock ROM, Please any link or description......

You can get that from HTC website of your region.
Goto: http://www.htc.com/uk/selectcountry.aspx
Select your country -> Click Support -> Select your device and download the latest ROM update.
Of you can grab from here: http://shipped-roms.com/index.php?category=windows mobile&model=Topaz
(File: RUU_Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe)
Just sync your device in PC and run the above file and all should get updated .
Cheers!!!

[Q] Help Required regarding installing new ROM !!!

I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik

guitarguru31 said:
I am having Xperia X1 Black with factory installed Win Mo 6.1....so, now i wanted to try the Windows Mobile 6.5.3-Build- 29007. Can anyone help me with detailed procedure of installing new ROM on my X1.
I tried according to the procedure available in various post's. According to the procedure i need to first Hard SPL my phone. So, when i try doing that my progrees bar on the phone screen gets stuck at 0% and then i get a error that check the connection of the pc and phone.
In bootloader mode the configuration shown is as follows
KOVS110
SPL-0.78.0000
Micro P1-787
Micro P2-707
I even tried the direct SD card method in which i renamed the ROM file i.e RUU_signed.nbh to kovsimg.nbh...in this when i go to the bootloader mode, the tricolour screen shows with above mentioned specifications then after about few seconds another screen is displayed saying" LOADING..." and then gets stuck.
So, anybody can please help me with installing new ROM
Regards
Bhavik
Click to expand...
Click to collapse
You bootloader should show
Kovs110
SPL-0.78.OliNex
MicroP1-787
MicroP2-707
don't know if .0000 and OliNex is different
http://forum.xda-developers.com/showthread.php?t=431218
look here for download the good Hard SPL and then replace the 0.78 in it, HARD SPL with cable / computer (I never use SD CARD because it never works for me)
then you TASK29 (find it in the forum), then you can flash it =)

Phone in Hard Brick mode

I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?

You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room

Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0

when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?

It worked, but how did you know all this? Just spot on :good:

I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!

Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress

Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?

Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9

dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!

htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?

I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.

Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc

Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs

Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.

Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?