(SOLVED)i followed the whole instructions and i have done this before but know it keeps saying waiting for device. I have the latest SPL, recovery v1.4by Cyanogen and the new 3D hero by Drake can someone help please...
Thank you
The link that i followed:http://forum.xda-developers.com/showthread.php?t=467693&page=2
This may answer you
Check out post #205 in response to the question that I asked in this thread
http://forum.xda-developers.com/showthread.php?p=4059371#post4059372
It seems as though the latest SPL is preventing you from making the boot screen changes. Hope that helped. If it does, can you please edit your title to say [SOLVED] at the beginning. That's how @Neoblade likes it and I think its a great idea.
Related
I used Unsigned_HardSPL_for_Blackstone_OliNex 1.56 then i used
RUU_BlackStone_HTC_TUR_1.56.468.0_Radio_52.62.25.34_1.13.25.24_Ship
to change it to turkish.
It seem to all go well but,
Now when i start the phone the colors are all wrong as if it is running @ a very low resolution.
I have attaced a few pictures to show the situation.
Also if you look @ the last picture you can see that when i power off then power back on the resolution is correct but the screen seems
very unresponsive.
I have tried to Restore_Stock_SPL_113 but not actually sure if it was the same one.
I have also tried USPL GUI v 2.5 (no difference)
I have tried HD_WM65__V63__B23053COM3__D091809
And i have finally tried Miri_WM65_23017_Premium_Manila_2.5_REV7.1
I dont no what else to do i have searched and read various posts regarding what i actually wanted to do and how to retify this problem but i cant find a solution.
If anyone has any answers i would really appriciate it.
If the answer has been looking me in the face and i have miss it im sorry.
Thanks.
just install the newest stock rom from the htc website and then the rom of your choice.
then the colors will look normal again
It looks like your spl is wrong for the rom, the colour problem is typical of this situation.
You mention that you tried hspl - 1.56.Olinex. Are you sure it installed successfully? If you go into bootloader mode, does it show 1.56.Olinex on screen? Any one of the roms you mention should work perfectly with 1.56. Please take any other queries to the Dummies Guide thread as the mods will close this one down.
As above, it looks like your SPL is incorrect and HSPL 1.56 has not been successful. Check your SPL in bootloader and post further queries in the dummies guide thread.
Thread closed
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?
I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong
I do but also need to make sure I do an original spl and radio as well
first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished
This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards
+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...
J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed
Hello
I've tried some roms that i download from here and i had a lot of problem with all of them.
problem in graphics problem with the phone the get stuck a lot even the phone doesnt work.....
WIFI and BL working but phone is not.
Anyone know how can i put this operation system without probs?
Thank
Installing new ROMS, make sure you hard reset right after the phone reboots from a fresh ROM Load. People have noted here that problems almost always surface without the Hard Reset on a fresh ROM.
Try it and let us know
Yea i did it and it wont work and when i triend to put the older version 6.1
it do the same Graphic probs
The big problem is that he dont recognize the Sim phone it wont connect .
Sorry And also the button isnt working too sometimes.... im in trouble anyone?
a very basic question: the SPL version currently on your phone?
Wow, dude read the dummies guide, please. The stickies are there for a reason!
http://forum.xda-developers.com/showthread.php?t=505377
As above 2 posts it sounds like a common issue with SPL's not matching. Read dummies guide thread (post above) and post further queries in that thread
Thread closed
Hi,
I'm new to forums so apologies if I sound inexperienced!! I've got an HTC touch HD that I got from the carphone warehouse in the UK (connected to o2). It's currently got windows 6.1 but I'm wondering if it's possible to install 6.5 on it. HTC are telling me no but I've heard others have done it.
If it's possible can someone direct me to the download file and explain what I need to do to complete the install?
Many thanks
JW83
Install HSPL (up) and instal rom. There are many here. Sorry for my English I do not know good English. It is not difficult when I was able too.
It is possible, read the sticky threads, they will point you in the right direction.
But be aware you lose your warranty with WM6.5 on there. Just make sure you read up and understand before taking the plunge And welcome to the forum.
xmsnx said:
It is possible, read the sticky threads, they will point you in the right direction.
But be aware you lose your warranty with WM6.5 on there. Just make sure you read up and understand before taking the plunge And welcome to the forum.
Click to expand...
Click to collapse
The warranty-thing is not really true: if you don't read the steps etc, and your phone gets bricked (just software), HTC will not replace it for you.
This is where you need to start. Read this Guide carefully and then read it again for good measure. If you have any further specific questions then ask them in that thread and you'll get helped.
I have tried to downloade an ROM.
When its start to load the hole thing just stop. It stands on 0% for longe time to i unplug the USB.
I have tried everything.
Now im taking the Dummies guide..again..
xtineze said:
I have tried to downloade an ROM.
When its start to load the hole thing just stop. It stands on 0% for longe time to i unplug the USB.
I have tried everything.
Now im taking the Dummies guide..again..
Click to expand...
Click to collapse
Post your problems in the Dummies Guide thread please. You'll get help there as this one will probably be closed soon. Please also give more details of the errors, ie what error code you get and whether you have used uspl or hspl.
As above, please post in relevant thread and myself or someone else will assist you. ClydeB1 has already provided link to thread.
Ta
Rick
p.s. thread closed
i`m sorry about the new threat but i`m new here and i could`t find anything to help me ..
how do i boot a new rom to my htc dream ..
i know that in win mobile you need to hard spl first then just download the rom you want and that`s it.. how do i do`it whith a android device?
thank you in advance and i`m sorry again for the new thread
Hold down "Home" and hit "Power." Then hit Alt+F.
Also, this should be in Q&A.
i am actually wanting a step by step instruction.
something from the unboxing to the actual booting proces ..
ok the phone is unboxed obviously and unlocked as well .. what next ?
scoutish said:
i am actually wanting a step by step instruction.
something from the unboxing to the actual booting proces ..
ok the phone is unboxed obviously and unlocked as well .. what next ?
Click to expand...
Click to collapse
I like the description of the process on this site. it is complete but a little old. The links should work.
http://androidandme.com/2009/08/news/how-to-root-a-t-mobile-g1-and-mytouch-3g-android-phone/
READ THE WHOLE THING FIRST.
Also check out
http://forum.xda-developers.com/showthread.php?t=442480
Lots of the same stuff with more options.
There are new versions of the recovery image and the Roms which are in the development section on xda. Just be sure to read everything a few times and you'll have no trouble.
i will check the site now
thank you
And please please please make sure you understand everything about Haykuro's (Danger/Death) SPL IF you decide to flash it. It's pretty much the only way you can brick your G1. If your ROM doesn't require Death SPL then skip it until you get the hang of flashing things.