sorry,my english is so fool
i have a goldcard,also i have the rom files,but i don't know the rom files have to change what name in goldcard.
The RUU_signed.nbh should be renamed as RHODIMG.nbh
hi there,
i just wanted to know where did you get the Qmat from for the TP2, can send it for me, i need to make a Gold Card Also and also where did you get the storage card ID
Thank you,
You can buy QMAT here: http://revskills.de/
you can also PM me for help
Related
Hi,
I would like to create a backup sd, but I only have the files from the aWizard Tool (three nba files and the extended rom). And the manuals here just show it for a nb0 file...
I hope someone could help me.
km
km said:
Hi,
I would like to create a backup sd, but I only have the files from the aWizard Tool (three nba files and the extended rom). And the manuals here just show it for a nb0 file...
I hope someone could help me.
km
Click to expand...
Click to collapse
I'm not sure, whether i understood right.. Do you wanna backup full rom to SD card? If yes, click on my signature to get the tool. If not, please explain what you need..
Yes, but I want tu backup the nda files (I think OS /radio /Splash/ Logo)
And I don't have one big file.
What tool I need from your homepage?
EDIT:
It's a charmer rom I want to install.
But why?..
The only sense to have SD-Card backup is to restore FULL ROM from this Card (it has the special rom dump, and it's not readable in PC-reader f.e.).. To restore your rom partly you can use aWizard...
aWizard doesn't work. It shows after pressing writing a new os, that it found a rom in the rom folder and I should press a number. But it doesn't show me, which number. So I cannot use this tool to install the rom...
(I think I should choose the rom with the number)
So I thought I could try it with a sd-card backup...
Can I make on big file with the rom-parts?
For Information:
I have a german charmer-device with an english rom and I would like to install a german romvagain.
I have only the aWizard Tool backup of the old rom.
I don't have unlocked (cid) the phone, because I think it is not necessary, because I will install a "correct" rom back and I would loose my warrenty.
thank you,
km
hi all
i noticed most of us having this problem with imate spjas \ breeze
stuck at bootscreen and can startup the phone
i downloaded the original rom from
ftp://ftp.clubimate.com/
extracted it and took the nbh file renamed it to breeimg.nbh
copied it to SD card and camer+reset button
congratulations
where is every body... can any majestious senior or moderator help...
vodovodo said:
hi all
i noticed most of us having this problem with imate spjas \ breeze
stuck at bootscreen and can startup the phone
i downloaded the original rom from
ftp://ftp.clubimate.com/
extracted it and took the nbh file renamed it to breeimg.nbh
copied it to SD card and camer+reset button
congratulations
Click to expand...
Click to collapse
i"m pleased to know that you fixed your device, and thx that you shared with us your xperience, specially that no one seems to care for the members request in this forum even the moderator....
i dtried what you shared with us, but i couldn't repair my device, still stucked in the DAME windows mobile blue screen
hope i'll find an answer from the majestious members or senoirs or even moderator to repair my device....
i think the problem is there is the hardware diff. between spjas and mteor ! i dont know
do u have the imate ??? the one with the camera infront ?
vodovodo said:
i think the problem is there is the hardware diff. between spjas and mteor ! i dont know
do u have the imate ??? the one with the camera infront ?
Click to expand...
Click to collapse
yep that's it...
when i extracted the rom that i downloded from ftp imate club, and renamed the breeimg.nbh, i copied it to the memory card, i pressed cam+power botton, the device entered into bootloader, then marked checking for 15 to 20 sec
then NOT ALLOWED....
really i'm tired from trying to fix help.... euffffffffffffffffffffffffffff
just relax.... i felt the same and i couldnt think strainght too
lets take it step by step
1- make sure u formated the SD with FAT32
2- make sure to rename the nbh from the exe file "not the exe itself just right click and extract here if u have winace or winrar" to BREEIMG.nbh with cap. letters
try again and tell me what happened
helloooooooooooooooooo no one can help here, where are the professionel in the forum SOS HELPPPPPPPPPPPPpp!!!!!!!!!
vodovodo said:
just relax.... i felt the same and i couldnt think strainght too
lets take it step by step
1- make sure u formated the SD with FAT32
2- make sure to rename the nbh from the exe file "not the exe itself just right click and extract here if u have winace or winrar" to BREEIMG.nbh with cap. letters
try again and tell me what happened
Click to expand...
Click to collapse
nothing better,
when i did these steps, the device didn't even load or even the cheking word.
but when i tried to synchronize my device via active sync and install the rom the device started to install windows 1%... 2% and oupssss failed, the device turned off and restated....
just to let you kow on the 3 color screen (bootloader screen)
BREE100
IPL-0.90
REE100
SPL-1.09.0000
and i installed before this bootloader vrsion that i geted from a link mentionned to be installed before the BREE rus
really i dont know what to do...
but really thx for your help...
it seems you are the one who care in this forum...
Hi I lost USB connection with my Blackstone and I can’t flash any ROMs or install HSPL so I can flash from SD card. I try the forum is there any way to hard SPL from SD card or is there any solution to fix USB connection problem? (which after searching the forum I found out there isn’t) so only solution remains send it to repair. But I have a cooked ROM with stock SPL installed; please someone can convert my stock ROM into nbh format so I can flash it from the SD card or teach me how to from stock exe file into nbh remember I can’t dump the rom.
Please help thank a lot.
You can extract the ruu_signed.nbh out of the shipped exe.
You don't need to dump any rom!
Just open the stok/shipped rom with winrar: click with right button on shipped rom and choose open with winrar.
When winrar is open you just estract the ruu_signed.nbh file where you want and rename it into BLACIMG.nhb, put into your sd card and flash!
PS. sd card is must formated into Fat32 to perform flash!
Thanks to your quick response i will try it right away. thanks again
I let you guys know what happen
Thanks a million for your help yes I able to install stock rom back from a SD card know i can send it for repair.
Thank you very much I really appreciate you help
Great, I'm happy that you've success!
dont forget
adeel2cool said:
Thanks a million for your help yes I able to install stock rom back from a SD card know i can send it for repair.
Thank you very much I really appreciate you help
Click to expand...
Click to collapse
don't forget to do the stock spl after flashing the stock rom..........
So how can I return the nbh file to the RUU exe file?
pvloc90 said:
So how can I return the nbh file to the RUU exe file?
Click to expand...
Click to collapse
Just make sure the nbh file is in the same folder as the RUU exe and it will pick it up when you run the RUU.
I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
bgeorgi said:
I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Click to expand...
Click to collapse
You need to extract the RUU_signed bit from the image i am having the same issue and i write software for a living. Are you following the tutorial on how to back up your rom?
video guides
Im actually following BioVolt's video guides which I think u can find on this site if u search biovolt's video tutorials? they're really good and detailed but they're kinda long.
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Stalix said:
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Click to expand...
Click to collapse
it's not for flashing it is for doing a ROM dump in all the tutorials it does'nt tell you what clearly to do with the stock ROM once downloaded. But now i know along the same lines as your idea It just needs renaming to RUU_Signed.nbh then place this in the same folder as the 4 files you have allready extracted.
I have watched biovaults vids good but a little long for me.
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
blondyz said:
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
Click to expand...
Click to collapse
The reason we use uk roms is cos they they are WWE(world wide english) and the kitchen needs this to dump the rom.
the one you end up with will be an exact copy of your stock rom.
Yes just rename the uk one
Allright, thanks alot! Really helped me out.
Intratech said:
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
Click to expand...
Click to collapse
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Ersill said:
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Click to expand...
Click to collapse
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
blondyz said:
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
Click to expand...
Click to collapse
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Ersill said:
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Click to expand...
Click to collapse
Might be, but you still should find the file if you successfully transefered it to the storage card...
Just to be sure, you haven't reformatted your storage card recently? It has to be in the "FAT_32" format to be flashable..
Can't really think of much else that gives you these problems..
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
bgeorgi said:
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
Click to expand...
Click to collapse
It must be uk ROM due to it being the only one that is guarenteed WWE the kicthen won't recognise anything else and when you flash back it will be whatever stock rom you currently have.
Hi all, can someone help me?
I dont know how to install an .image file to my SE X11?
I want to restore the original ROM, from SE but the update service doesnt work.
Just rename it to KOVSIMG.nbh and put it on SD Card
next time try use Search