Recently my phone has started 2 drop calls, is this a radio issue (like should I reflash the newest radio) or could it possibly be from cyans 3.9.1 (since it is an exp build)?
Could be both honestly...Try flashing the new radio see if it helps
thanx will try and see if it helps!
Related
i have tried the SSPL and it works, i can flash the 3 roms i have found for the breeze
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.32.251.1_1.29.00.10_HTC
RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP
but since i flashed the 1.38 radio rom without using this sspl. whenever i use the sspl i can only flash the rom not the radio. my phone is now stuck on the 1.38 radio which drops calls after about 30 mins and the battery life is really crap, i am on area where u get full 2g or 1 bar of 3g so its doing its trademark searching and killing the battery.
I have tried duttys tool with the radio extracted and put on the SD card and flashed but no joy.
my device is not SuperCID i just use the SSPL to bypass it.
anyone got any ideas how i can flash the 1.29 radio or for that fact any radio to phone instead of the rom?
i've read that many have tried 1.20 radio to solve a few problems but i have no idea how i can flash this. I have tried to make my own rom with the tools here but again they just flash the new OS living the radio 1.38.00.10. i am downloading RUU_Radinly_1.20.31.10.exe and will flash it if i knew how. SSPL just turns around and says invalid ID error 244. so its like the radio isn't designed for this device.
anyone got any idea ?
1.29 is even worse than 1.38... Missed calls in full GSM coverage (4 bars), horrible sound quality (either you or called party can't hear most of the conversation)... Don't even try it!
And concerning the problem not being able to flash new radio:
As I already wrote in this thread, flashing Radio ROM 1.29 (and above) also flashes new Radio Bootloader 0108 (different thing than Phone bootloader) which requires SPL 1.09 (or newer) to flash Radio ROMs.
Current SSPL for Breeze is based on some older SPL which, as you found out, isn't compatible. Until someone creates SSPL for Breeze based on SPL 1.09 or SPL 1.10, you're stuck just like me...
thanks very much for the post explaining it. i have read someone might make a new sspl with the new spl's in mind so as you said, we have to wait and i guess i will. i am however going to send my breeze back to HTC because of the constant dropping of calls whether it is 10seconds or 35 mins, it drops it without fail.
I decided to flash my radio to the latest 1.11.25.76. The update was going fine until it reached 99%. Then it suddenly came up with an error. So it unplugged my phone and took the battery out and rebooted the phone. Everything was fine. I went to setting and checked the radio version and it HAD updated to the latest version. My question is, why did this error occur, and has it FULLY patched it to the latest version? Also what are the main advantages of updating the radio?
Thanks
Fi3nD said:
I decided to flash my radio to the latest 1.11.25.76. The update was going fine until it reached 99%. Then it suddenly came up with an error. So it unplugged my phone and took the battery out and rebooted the phone. Everything was fine. I went to setting and checked the radio version and it HAD updated to the latest version. My question is, why did this error occur, and has it FULLY patched it to the latest version? Also what are the main advantages of updating the radio?
Thanks
Click to expand...
Click to collapse
Did you hard-spl?
Sometimes this happen but it flashes ok...The second time you do it...
Advantages:
Radio may or may not improve your battery and other stuff like getting better reception in wi-fi gps and radio signal (cellphone signal)....
I can tell you for me the better radio is 1.11.25.71....
What it depends....On many things...
Try to flash again and you will see no problem to 100%...
There is a radio thread also find it and get studing....
thanks alot
and yes i did hard-spl, Im using itje's touch-it so i needed to hard-spl before i flashed it. Just gonna try out different radio's as my signal seems to have gotten worse (1 or 2 bars atm!!!), used to get full signal in my house.
Just as the title, I restart the phone and it can't find the signal either.So I recovery the RC29, and It can catch the signal after the system is up, but in a while , the signal become bad and lose it again.So does any body know what I can do?
Please Search and post in the right thread/forum. Thank you.
Mine did that to until I just flashed to the radio on Haykuro's blog and it worked fine from then on. Hope this helps
It's very strange, as the radio version was the newest when I use Ion. And I meet this problem before, this problem was fixed after I flash G2's radio. And this problem seams always happened when I use the network. I don't know whether it has the matter with the order that I flash the rom. I just recovery to RC29 and flash the radio and flash ADP1.5 rom. Thanks any way.
hi forum. i have been looking around to solve this problem but i wasn't able to find a solution yet so i am asking here.
i had a tilt working great, i had an accident and the phone is destroyed so i get another one.
it is the same phone but it just don't have the camera, this one came with a new version of windows mobile(6.1).
i am now having this issue, when i get an incoming call and i answer i can't hear anything from the other side and the other side can't hear me either.
after that, the phone gets totally muted, it don't make any more sound when sliding or whatever.
the only way to fix it is reboot the phone, that way i get sound again but after i get an incoming call the problem happens again.
the problem wasn't happening if i made the call but today i made a long call and after a while talking i got a constant buzz, the buzz only stopped after i turned off the phone.
any help will be apreciated as i am totally lost here.
thanks.
Have you tried flashing a different radio or a different ROM?
talking with my vendor it seems that he flashed the rom and maybe the porblem can be the radio.
i am reading here http://forum.xda-developers.com/showthread.php?t=393182 but i dont have idea wich radio should i download and either how to make the installation.
my device information is:
ROM version: 3.57.502.2 WWE
Rom date: 07/17/2008
Radio Version: 1.70.OliNex
Protocol Version: 25.65.30.04H
so maybe the radio is not compatible with the rom and that is why i am having issues with the sound ?
That is a possibility. The nice part about flashing radios is that they are completely independent from the ROM. When you flash a radio it won't flash or reset your device. Therefore, you can flash and test as many radios as you want without any real negative side-effects Just stick with the one that ends up working the best for you!
Digital Outcast, thank you for your help.
do you think you or someone can point me to a tutorial to flash the radio only ?
i am finding how to update the rom but not the radio only.
thank you again.
To flash the radio follow the same steps as flashing the ROM. You need only the radio (.nbh file) and the Kaiser Custom RUU. Just don't do a hard-reset or anything after it completes!
cool, i installed a new radio and it fixed that problem, i am checking other common features of the phone, for now everything seems to be fine.
thank you very much for your help
Problem with incoming call
I have exactly the same problem and the same versions of software and firmware. Which version of the radio firmware did you install? Where did you get it? This is my first use of a smart phone and don't know much at all about where to get this.
Thanks!!
gladone said:
I have exactly the same problem and the same versions of software and firmware. Which version of the radio firmware did you install? Where did you get it? This is my first use of a smart phone and don't know much at all about where to get this.
Thanks!!
Click to expand...
Click to collapse
Start by reading the stickies. Always best place to start. Or if you are lazy and wish to just jump to radios use this >link<. But I definitely recommend you read all the stickies before flashing a device for the first time. Just start with the newest radio and work backwards til you find a good one for your device.
I am using Cyanogen 4.0.1.
I recently flashed the new radio and then flashed the HardSPL and ever since then I have not been able to scan for Wifi networks. That appears to be the only problem I am experiencing at the moment.
Any one else have similar issues, or know of how to fix this.
Thanks in advance.
The SPL doesn't have anything to do with wifi. What does the baseband say in about phone. wifi, 3g etc. are powered by the radio, try to reflash that. Also link to the new radio you flashed. Doesn't hurt to check the md5 of your download.
I would definitely start with reflashing the radio image from Haykuro's site. If you are going to continue to use Cyanogen's amazing ROM, I would NOT flash Haykuro's SPL. Stay with the HardSPL to reduce chance of bricking on accident.
evilkorn said:
The SPL doesn't have anything to do with wifi. What does the baseband say in about phone. wifi, 3g etc. are powered by the radio, try to reflash that. Also link to the new radio you flashed. Doesn't hurt to check the md5 of your download.
Click to expand...
Click to collapse
I flashed the radio from Haykuro's site, I re-flashed and I still do not get any wifi.
The wifi function will turn on fine but then when I try to scan for my network and it will display a message saying "unable to scan for wifi networks" and then the wifi function will turn itself off.
btw, I am now running CM 4.0.2
I'm running Cyanogen 4.0.1 with Haykuro's radio+HardSPL and wifi works find and everything else. wipe and reflash.
something similar happened to me on my tmobile dash.
i flashed the spl wrong or idk and then my wi-fi broke
People have had similar experiences with wifi on the xROM. Many people weren't able to get wifi up and running with HardSPL, but then upgraded to Haykuro's SPL and it started working fine.
I don't think this is mere coincidence... even though neither dev requires the newest SPL, it seems that wifi doesn't work without it.
For what it's worth, update your radio (I'm sure you're on the latest radio, but for posterity's sake, just do it again), then update to the new SPL, then reflash your ROM.
Report back... I'm guessing you'll be a happy camper.
I've never had a problem but i upgraded to hardspl before cyans newest roms. maybe something in their updates kills the functionality
you should have put the newest radio before you flashed a cupcake rom
Any updates antirock? If it's still not working after a wipe and reflash, I would recommend reflashing the newest radio and flashing Haykuro's SPL. Check my sig for more info.
uansari1 said:
Any updates antirock? If it's still not working after a wipe and reflash, I would recommend reflashing the newest radio and flashing Haykuro's SPL. Check my sig for more info.
Click to expand...
Click to collapse
Ok, here is what I did.
wiped and reflashed radio and it still didn't work.
So I reverted back to Cyanogen 4.0, reflashed radio, reflashed spl, wiped, reflashed CM 4.0.2...and now wifi is working.
However, the vibrate funciton on my soft keyboard doesn't work. I figure that it is the rom, but no one else seems to be having this problem in the CM 4.0.2 thread.
Thanks for all of your help!!
antirock said:
Ok, here is what I did.
wiped and reflashed radio and it still didn't work.
So I reverted back to Cyanogen 4.0, reflashed radio, reflashed spl, wiped, reflashed CM 4.0.2...and now wifi is working.
However, the vibrate funciton on my soft keyboard doesn't work. I figure that it is the rom, but no one else seems to be having this problem in the CM 4.0.2 thread.
Thanks for all of your help!!
Click to expand...
Click to collapse
So you're still on HardSPL? If others aren't having this problem, then try Haykuro's SPL if you meet the requirements.
I had two G1s for a while... one of them flashed to JACxROM fine, but on the other, wifi wouldn't work. They both had the same radio and HardSPL. Flashing Haykuro's SPL to that phone and suddenly everything worked fine.
I don't know why these phones are like that... maybe its some small difference with the actual hardware inside the phone, or the downloaded file you're trying to flash, or maybe whether or not you flash when there's a full moon. Your guess is as good as mine. Point is that MAYBE the newer SPL will work for you.
It's funny how wiping, uninstalling and reinstalling usually fixes everything.