Anybody know solutions, how to disable red and green hardware buttons on incoming calls?
Hmmm nobody don't know?
BagbKa said:
Hmmm nobody don't know?
Click to expand...
Click to collapse
Use TouchLockPro....and configure KeysOnly
ZuinigeRijder said:
Use TouchLockPro....and configure KeysOnly
Click to expand...
Click to collapse
Ok thanks! I will try this software.
This program doesn't work correctly for me
BagbKa said:
This program doesn't work correctly for me
Click to expand...
Click to collapse
Strange. Can you be more specific of the problem you did encounter. Because maybe I can help
Try Pocketshield.
Tatsch said:
Try Pocketshield.
Click to expand...
Click to collapse
x 2
Even more today being half price
Locks both screen and HW keys on incoming calls, it will also allow you to chose to free the volume keys in case you want to mute the ring without having to unlock it (let's say in a meeting, just squeeze your pocket to hit the volume key to mute)
Related
I often dial using the default touch screen keypad on my Tilt but it's really bad; it lags heavily between presses and if I go too quickly it iwll lose the intermettent presses. Any known solution?
...try without the skin ?
sebbes said:
...try without the skin ?
Click to expand...
Click to collapse
Which skin? I'm using what it came with.
Same problem here to. I saw the same problem with the hermes. Very anoing when u use a phone service that u have to enter serveral digits(code, bank accont etc)
Its probably not fixable
just disable the sound when clicking a button. This helps for me.
Yes that did it but you should not have to
Anyway thanx for the super info... Finaly i can type a number at a normal speed.
Thanx again
Bouloama said:
just disable the sound when clicking a button. This helps for me.
Click to expand...
Click to collapse
how do you do that? i checked all sounds and notifications
I have a full mute device , only cant find the sound settings for those buttons in the dialer , pretty annoing
thnx
start-settings-personal-phone-keypad
perfect , thnx
lag fixed for me
Sad sort of workaround but it works. Thanks.
Does this fix pressing buttons and it not responding? I use the beeps as confirmation that it actually responded...
Does anyone know how i can enable haptic / vibration feedback for virtual keys while SMS or Email?
TIA!
up? is possible?
I don't think it is possible. Haptic was included in test versions of the Diamond but poor user receptiveness meant that it was taken out of the final build. I've had a dig in the registry and can't find anything that hints it's still there but you never know there are some clever people here!
I have haptic feedback in the dialer dialpad. It works great
@mooooooa
what are the steps in order to get that?
SecureGSM said:
@mooooooa
what are the steps in order to get that?
Click to expand...
Click to collapse
I second that!
For the dialpad, it should be the same reg edits as for any WM5/6 phone. Do a search for DTMF or VIBRATE in the Kaiser forum, and you'll find it.
I have a feeling he's using a 3rd party app...
View attachment phonepadvibratewm6.cab
I tried this and find the vibrate to be too strong. Instead, does anyone know how to enable the feedback which happens in Teeter, the 'bump' you feel when the ball hits an object?
DT
@daren1
v0.15w0.15v0.15w0.15.
vibrate for 0.15s, wait for 0.15s, vibrate for 0.15s, wait for 0.15s.
replacing *vibrate* with combination as per above. soft reset might be required.
not sure if that one works. should provide softer vibration if works.
SecureGSM said:
@daren1
v0.15w0.15v0.15w0.15.
vibrate for 0.15s, wait for 0.15s, vibrate for 0.15s, wait for 0.15s.
replacing *vibrate* with combination as per above. soft reset might be required.
not sure if that one works. should provide softer vibration if works.
Click to expand...
Click to collapse
This did not work. After modifying the registry as you directed, there was no vibration at all. If you have any other suggestions, let me know and I will give it a try.
Thanks for your time.
DT
mooooooa said:
View attachment 96383
Click to expand...
Click to collapse
Works great
But how can I uninstall it? It's not appear in the installed programs list...
daren1 said:
I tried this and find the vibrate to be too strong. Instead, does anyone know how to enable the feedback which happens in Teeter, the 'bump' you feel when the ball hits an object?
DT
Click to expand...
Click to collapse
Excellent idea! I'd really love that
pedmond said:
Excellent idea! I'd really love that
Click to expand...
Click to collapse
Second that...
me too!!!!
Please guys
Anybody knows how I can uninstall phonepadvibratewm6.cab?
Thanks.
sgbmad said:
Anybody knows how I can uninstall phonepadvibratewm6.cab?
Thanks.
Click to expand...
Click to collapse
I believe it doesn't install any files, it's just a reg tweak, so the only way to "uninstall" is to return these registry keys back to their default values. You might wanna do a search in the kaiser forum, but I'm not sure of that.
sgbmad said:
Anybody knows how I can uninstall phonepadvibratewm6.cab?
Thanks.
Click to expand...
Click to collapse
You can change them back without manually editting the registry. Just go to Start > Settings > Phone, and change the Kepyad tones to 'None', press OK, then reselect your preferred (None, Long or Short)
Hope this helps
@mcwtrekkie, slicker:Thank you very much
Hello, im using miri 8.1 premium and i want to remove the "slide down for more options" when i make a call... is this possible??
+1 i hate it!
+1, i really don't like it
yes! Me too, it is the most useless junk ever thought by the HTC ppl! It is annoying, please someone please help us remove it!
And why don't you ask miri for it in is thread instead opening a new one???
speed200 said:
And why don't you ask miri for it in is thread instead opening a new one???
Click to expand...
Click to collapse
Because its not just in Miri's rom, its in more or less all of them now
I want it back to my ROM badly. where is the cab?
+1
i also do not need it, and would like to know how to turn it off
+1.
Its a pain to mute/un-mute during conf calls with this on.
Anyone?
For those users interested to find a solution to disable the curtain, here is the package. Could be a dll or a registry key.
Found a solution
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
sank27 said:
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
Click to expand...
Click to collapse
Maybe you can set it to 0 (zero) to disable it?
kwbr said:
Maybe you can set it to 0 (zero) to disable it?
Click to expand...
Click to collapse
i tried that actually but it still show up
i also tried to delete the whole key "cover"
no luck
solaris10 said:
I want it back to my ROM badly. where is the cab?
Click to expand...
Click to collapse
Me too. any cab availabale?
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
contact managment sux on the standard one
and in-call options are better on the new ones
tiburone said:
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
Click to expand...
Click to collapse
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
Click to expand...
Click to collapse
I had zero issue with the standard one, it was functional and did exactly as one would expect. Topaz dialer hides all options instantly making it absolutely dangerous to try and activate loudspeaker whilst driving . The other issue is landscape view, if using any rotate screen app and having the device in landscape (ie. whilst using GPS apps etc) and receiving a call there is no dialer shown at all!
Surely I am not the only one to notice these problems?
thanks man it helped
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Click to expand...
Click to collapse
thank's. I'll try that - it looks ok.
But no i have a problem - remove the curtain...
Hi,
I don't think my question is specific to a rom or a dialer.
I don't want the dialer appears after a call.
I would like to reach the home screen directly without the 5 seconds dialer transition.
Is it possible with a registry tweak or something else please ?
Thanks for all.
This is not a problem for nobody this dialer after a call ?
To be always forced to click on the cross or a hard button to reach the home screen ?
Please tell me a solution if you know it.
I would also like to know if a tweak like this exists...
I'll try to find a way but anyone knowing this is welcome....
Try this registry setting you must create:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
Just push the Home button after the end button is pressed, you wont wait 5 seconds.
kelleci said:
Try this registry setting you must create:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
Click to expand...
Click to collapse
Thanks, i'll try that ASAP
AwaKeN said:
Just push the Home button after the end button is pressed, you wont wait 5 seconds.
Click to expand...
Click to collapse
This is precisely what i want to avoid
Nevertheless thanks for your answer
kelleci said:
Try this registry setting you must create:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
Click to expand...
Click to collapse
Unfortunally this tweak doesn't work, even after a soft reset.
Did it work for you and with which device and rom ?
poussinou69 said:
Unfortunally this tweak doesn't work, even after a soft reset.
Did it work for you and with which device and rom ?
Click to expand...
Click to collapse
My device is diamond and I use nataly 2.7, it works...
Another way:You can install advanced config and you can find in phone tab..
I have to revive this thread cause I am really interested in a tweak like this...
I've tried everything in Advanced Configuration and in Diamond Tweak but there is no tweak for this...
Does anyone know a tweak?
I think it's impossible.
I tried all the tweaks.
Hi All ,
Just a little request to know if somebody knows how to hide automatically the dial PAD when launching the Phone app
Because I never use it and I prefer to directly access to phone history.
Somebody can help me?
Thanks!
Kinoal said:
Hi All ,
Just a little request to know if somebody knows how to hide automatically the dial PAD when launching the Phone app
Because I never use it and I prefer to directly access to phone history.
Somebody can help me?
Thanks!
Click to expand...
Click to collapse
Nobody?
dont you just click the bottom left button? i mean its only one button away...
LitoNi said:
dont you just click the bottom left button? i mean its only one button away...
Click to expand...
Click to collapse
Yes there is a button but I just want to not need to push each time Because I'm mostly don't use my dial pad
i would love this function... but couldn't find anywhere