Related
Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?
I was wondering if I can use any bluetooth earphones to listen to my audio files on my Uk Orange M700. If so which is best and how do I set it up.
Thank you for any advice.
yes, loads work with the spvm700, search this site and you will find loads of advice, the sony one's are good, I am using the HTC s100 and they are working well.
thanks mate!i can use for any call now!but,when i use for tcpmp and coreplayer still didn't have any sound!do i need to sitting something for listen a music and mp4 video!help please!
Sorry, I do not know why you are struggling with TCMP, I am only using WMP at the moment. Have a search on the site I'm sure someone must have looked at this kind of problem before.
Hello;
I purchased the HTC Tytn II, I not received it yet , I have a Hermes and a Wizard, I have a bluetooth gps that I use in all, those phones and my laptop, I was thinking to sell my wizard with the bluetooth gps to a friend but, Can I use the Tytn II as a bluetooth device in my laptop or in my Hermes?, if not I cant sell my bluetooth gps. I use in my MicroPC Microsoft Streets and in my Hermes i-GO. Can I use i-GO with the internal gps of the kaiser? What is TouchFlo? Thank You and sorry if that questions are answered in the site, I did not found them.
vijovame said:
Hello;
I purchased the HTC Tytn II, I not received it yet , I have a Hermes and a Wizard, I have a bluetooth gps that I use in all, those phones and my laptop, I was thinking to sell my wizard with the bluetooth gps to a friend but, Can I use the Tytn II as a bluetooth device in my laptop or in my Hermes?, if not I cant sell my bluetooth gps. I use in my MicroPC Microsoft Streets and in my Hermes i-GO. Can I use i-GO with the internal gps of the kaiser? What is TouchFlo? Thank You and sorry if that questions are answered in the site, I did not found them.
Click to expand...
Click to collapse
If I understand you correctly
1. you want to know whether you can share the GPS receiver in the Kaiser with your laptop - Yes but you will need something like Franson GPS Gate to share the built-in GPS signal over activesync or BT.
2. Yes, iGo works fine with th internal receiver.
kavi said:
If I understand you correctly
1. you want to know whether you can share the GPS receiver in the Kaiser with your laptop - Yes but you will need something like Franson GPS Gate to share the built-in GPS signal over activesync or BT.
2. Yes, iGo works fine with th internal receiver.
Click to expand...
Click to collapse
Yes, you understand me! Thank You!!!
Do you know what is TouchFlo?
TouchFlo is the finger scrolling of menus and panning pictures and web pages. It's inlcuded in the Tilt ROM.
vijovame said:
Do you know what is TouchFlo?
Click to expand...
Click to collapse
See for yourself
http://www.youtube.com/watch?v=Hyt_cygLAUo
Thanks!!!!!
Thank You Friends!!!!
newbie2 said:
TouchFlo is the finger scrolling of menus and panning pictures and web pages. It's inlcuded in the Tilt ROM.
Click to expand...
Click to collapse
Where in Tilt?
thanks
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Papamopps was asking this same question to me the other day....
I am trying to fix this one just keep coming back everyday for new posts.
Unless somebody else allready found the fix. Post this here. Thanks
mhhhh i will have a look at it....
... because after ayerthons workout for standy music.....
.... i bought a headset and 4gb sdhc card.
we´ll find a way for a2dp to work....
As I found in other threads and devices - try to use HTweakC for a2dp problems.
I also PM ithe that some cooks take 2 files from old ROM WM6 and replace the new files on WM6.1 with them - did teh trick for some...
or try this fix:
http://forum.xda-developers.com/showpost.php?p=1066713&postcount=1
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
hmm but wep200 is just not compatible with a2dp.. to use it to listen music you may use bluemusic, bt toggle or bt audio toggle (and im think there is a few more programs) but the quality is (i couldnt find a word) awful.
i didnt try a2dp on itje's roms but it works "out of box" on opentouch 3.0(same build) and pdaviet 6.1
im using motorola ht820 headset which ofcourse support a2dp.
marty123 said:
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
Click to expand...
Click to collapse
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
papamopps said:
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
Click to expand...
Click to collapse
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Sorry if I confused you guys
marty123 said:
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
Click to expand...
Click to collapse
Sorry if I confused you guys but I believe my headset WEP200 works with A2DP because I tried on Open Touch wm6.1. I didn't set A2DP tho... I am not sure if the ROM cooked with it but it worked. The real problem is that I can not use Open Touch because my wing freezes ALL the time.. so I'm more into itje's ROMs..
So uhm.. sorry for not responding to the original TS - but am I to understand that there are bluetooth stereo issues with the 6.1 WM roms?
I bought a sony ericsson ds980 stereo bluetooth headset the other day. My phone is currently being repaired by HTC (at least, I hope it is) - I intend to flash Itje's latest wm6.1 ROM to it the second I have my mighty Herald returned to me.
But... WM6.1 doesn't work well with Stereo Bluetooth you say? Even with the suggested fixes in the posts above?
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
which fix?
I only said let´s try this fix. I´ll get my headset during this week and i will try it.....
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
slimag said:
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
Click to expand...
Click to collapse
here you go.....
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
papamopps said:
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
Click to expand...
Click to collapse
Awsome to hear this..Now I am going to stop my research. And start searching for another great TWEAK
And i think i'm going to buy a headset to
hello Everybody,
first of all:
no problem with KCE-300BT while a2dp after done the registry fix (Value 60). thanks to this forum!
but now there is one problem:
when i want to update my phone-book after pairing, my radio is always displaying "updating" and no more continue.
do you know, if the kaiser has problems using the bluetooth comunication between the KCE-300BT (or other bluetooth adapters) ?
is there a fix/software for this problem??
garfield2412 said:
hello Everybody,
first of all:
no problem with KCE-300BT while a2dp after done the registry fix (Value 60). thanks to this forum!
but now there is one problem:
when i want to update my phone-book after pairing, my radio is always displaying "updating" and no more continue.
do you know, if the kaiser has problems using the bluetooth comunication between the KCE-300BT (or other bluetooth adapters) ?
is there a fix/software for this problem??
Click to expand...
Click to collapse
When they first pair after getting in the car, leave it a few minutes before accessing, this works for me. If I try to access my phonebook straight away I get the same problem.
What headunit do you have?
ewans said:
When they first pair after getting in the car, leave it a few minutes before accessing, this works for me. If I try to access my phonebook straight away I get the same problem.
What headunit do you have?
Click to expand...
Click to collapse
okay, thanks for this hint!
i'll try it tomorrow
i'm using the headunit idax-100 us-version directly imported
garfield2412 said:
hello Everybody,
first of all:
no problem with KCE-300BT while a2dp after done the registry fix (Value 60). thanks to this forum!
but now there is one problem:
when i want to update my phone-book after pairing, my radio is always displaying "updating" and no more continue.
do you know, if the kaiser has problems using the bluetooth comunication between the KCE-300BT (or other bluetooth adapters) ?
is there a fix/software for this problem??
Click to expand...
Click to collapse
Hi there, I am having a problem with my BT620s and was wondering what you were talking about with the registry fix and would it have to do with the sound cutting in and out periodically? I have searched this forum and have also asked in a new thread but ignored, but I guess I don't know how to search very well. How do you edit the registry?
Shinare said:
Hi there, I am having a problem with my BT620s and was wondering what you were talking about with the registry fix and would it have to do with the sound cutting in and out periodically? I have searched this forum and have also asked in a new thread but ignored, but I guess I don't know how to search very well. How do you edit the registry?
Click to expand...
Click to collapse
here you are:
http://forum.xda-developers.com/showthread.php?t=262119
editing the registry with: resco registry explorer
but: my problem with my alpine - didn't solve it.. always displaying "updating"
is there any problem with to many contacts? do i have to wait more than 20 minutes at the first time?
anybody out there with an alpine stereo too??
garfield2412 said:
here you are:
http://forum.xda-developers.com/showthread.php?t=262119
editing the registry with: resco registry explorer
but: my problem with my alpine - didn't solve it.. always displaying "updating"
is there any problem with to many contacts? do i have to wait more than 20 minutes at the first time?
anybody out there with an alpine stereo too??
Click to expand...
Click to collapse
okay.. getting closer to the problem!
--> PBAP Phonebook Access Profile Zugriff auf Telefonbuch (nur lesend)
does anybody know how to enable this on the kaiser?
mybe a soloution here: http://forum.xda-developers.com/showthread.php?t=377539&page=2 ?
but strange: http://www.htcwiki.com/page/ATT+TILT?t=anon
is displaying that kaiser supports this ? how to activate? or a problem with the KCE-300BT ?
very strange...
--> got access once!
was able to go in the dial list, recieved calls etc.
exited telephone function and tested it once more: same problem "updating"
no one here with car bluetooth and a kaiser? maybe with an alpine stereo and the kce-300bt ?
Solved the problem
using: http://www.jetwaremobile.com/bthfx/support.htm now !
after installing this software: no more problem with the "updating" problem !
my phone book is available after maximum 1 minute !
Dur - you just reminded me that I had installed the jetware extension! Sorry, I could have saved you some time.
Quick id10t question...
Sorry guys but I jumped in this conversation a little late.
I have an HTC 2125, 3125 (WM 5.0), and am contemplating purchasing the Tilt if it would make any difference.
With the registry fix and the Jetware software, will I have full compatibility with the KCE-300BT? Streaming music and all?
(using Alpine CDA-9885 head)
Thanks.
Bodacious said:
Sorry guys but I jumped in this conversation a little late.
I have an HTC 2125, 3125 (WM 5.0), and am contemplating purchasing the Tilt if it would make any difference.
With the registry fix and the Jetware software, will I have full compatibility with the KCE-300BT? Streaming music and all?
(using Alpine CDA-9885 head)
Thanks.
Click to expand...
Click to collapse
streaming music --> registry-fix and no more stuttering while playing via a2dp
full access to your phone-book --> install the jetware extension
Hi people! Sorry if i open this thread again. I've got a P750 (instead of Kaiser). Installed jetware and the first time it worked (synchronizing the phonebook to head unit).
But the second time i tried again and it always tells me "updating". Do I need to do other registry entries together with Jetware to enable phonebook?
Luk4S said:
Hi people! Sorry if i open this thread again. I've got a P750 (instead of Kaiser). Installed jetware and the first time it worked (synchronizing the phonebook to head unit).
But the second time i tried again and it always tells me "updating". Do I need to do other registry entries together with Jetware to enable phonebook?
Click to expand...
Click to collapse
windows mobile 6.0 or 6.1 ?
garfield2412 said:
windows mobile 6.0 or 6.1 ?
Click to expand...
Click to collapse
6.1 original update from Asus
Luk4S said:
6.1 original update from Asus
Click to expand...
Click to collapse
if you can believe in microsofts promise http://www.microsoft.com/windowsmobile/en-us/meet/version-compare.mspx the "pbap" is already installed on wm 6.1
(go to the link an then look at section "bluetooth")
but unfortunately WM 6.1 pbap (phone book access profile) doesn't work with my alpine.
didn't try it with jetware until now, sorry
garfield2412 said:
if you can believe in microsofts promise http://www.microsoft.com/windowsmobile/en-us/meet/version-compare.mspx the "pbap" is already installed on wm 6.1
(go to the link an then look at section "bluetooth")
but unfortunately WM 6.1 pbap (phone book access profile) doesn't work with my alpine.
didn't try it with jetware until now, sorry
Click to expand...
Click to collapse
yes it works with jetware. i've discovered that it works only after you've made or received a call.
Bodacious said:
Sorry guys but I jumped in this conversation a little late.
I have an HTC 2125, 3125 (WM 5.0), and am contemplating purchasing the Tilt if it would make any difference.
With the registry fix and the Jetware software, will I have full compatibility with the KCE-300BT? Streaming music and all?
(using Alpine CDA-9885 head)
Thanks.
Click to expand...
Click to collapse
Looking at buying the new KCE-350BT which is out now (unfortunately still not properly working with Polaris + WM6.0), just wanted to know do i still need to do this registry fix if i'm running Jetware.
Thanks
Tested the KCE-350BT in store and couldn't get it to work even with JetWare. It did download all the contacts at one point, but stuggles to pair every time and doesn't look like it would work very well at all.
Any other programs,registry fixes or ROMs to try? (to convert the OBEX format to PAB in the phone itself)? JetWare is a bit cumbersome having to browse using file explorer, doesn't even create any shortcuts etc.
Thanks in advance.
Luk4S said:
yes it works with jetware. i've discovered that it works only after you've made or received a call.
Click to expand...
Click to collapse
Bump. just wondering is WM 6.1 any better than 6.0 in terms of getting this to work properly. Working only after making or receiving calls sounds pretty annoying. i didn't find jetware to work at all really.
g-rig said:
Bump. just wondering is WM 6.1 any better than 6.0 in terms of getting this to work properly. Working only after making or receiving calls sounds pretty annoying. i didn't find jetware to work at all really.
Click to expand...
Click to collapse
Just wondering... Did you ever get this to work with your Polaris? I have one too and I would like it to connect to my Alpine IVA-W502R using a yet to be purchased 350BT. Should I keep my money or can we get it to work using Jetware / WM6.1 / regfixes or whatever needs be done?
Tnx in advance