Ok so recently i ran touchflo 3D 2.8 and it was wonderful after i learned how to partition correctly and then after that i decided to runn the new JACxHEro v1.1 and it sent me through boot loops and now when i even run touchflo 3D 2.8 I get boot loops plz help me asap
TheInfekted said:
Ok so recently i ran touchflo 3D 2.8 and it was wonderful after i learned how to partition correctly and then after that i decided to runn the new JACxHEro v1.1 and it sent me through boot loops and now when i even run touchflo 3D 2.8 I get boot loops plz help me asap
Click to expand...
Click to collapse
You need to wipe your ext2/3 partition every time. Go here for instructions
Ok i have the same problem and I already tried clearing the partition and still stuck in a loop plz help
Related
Hi All,
I seem to have a problem with the wife's G1.
She had Cyan's latest ROM 4.2.14.1
She wanted to try a 2.1 rom so I loaded CaNNoN202 eclair and it worked fine, even the live wallpapers.
Anyway, she wanted to go back to Cyan so I wiped the phone including the dalvik cache.
I then flashed cyan 4.2.14.1 and tried to re-install her nandroid but it just hangs on the first boot screen.
The other issue I sometimes get is it says 'run nandroid from console'..
Any odeas what I need to do?
Thanks
I have been on cyanogen and super d for a while now but recently decieded to try out the eclair Hero and sense roms, eclair flashes fine and I can flash the Kingklix hero rom no problem but I cant flash any other hero or sense rom.
Jacheroski rom at first just got stuck in a boot loop after reflashing the radio and spl it boots but everything and I mean everything force closes phone acore mms it doesnt even get to the setup process I have to do a battery pull and reflash kingklix.
On the sense roms it boots into htc quietly brilliant or nexus boot screen then just stops there waited more than 20mins for it to boot, nothing happens.
I've updated to the latest radio installed the death spl and updated to the latest recovery but I still cant get any other rom to flash, can anyone help
Not sure if it'd help you but commonly I havta wipe SD including ext partition to flash any sense rom.
Sent from my MT3G
using the XDA mobile application powered by Tapatalk
Jonnibravo said:
I have been on cyanogen and super d for a while now but recently decieded to try out the eclair Hero and sense roms, eclair flashes fine and I can flash the Kingklix hero rom no problem but I cant flash any other hero or sense rom.
Jacheroski rom at first just got stuck in a boot loop after reflashing the radio and spl it boots but everything and I mean everything force closes phone acore mms it doesnt even get to the setup process I have to do a battery pull and reflash kingklix.
On the sense roms it boots into htc quietly brilliant or nexus boot screen then just stops there waited more than 20mins for it to boot, nothing happens.
I've updated to the latest radio installed the death spl and updated to the latest recovery but I still cant get any other rom to flash, can anyone help
Click to expand...
Click to collapse
what rom are you currently trying to flash?
what does logcat show while it's loading? (adb shell logcat)
is it stuck at the G1 screen or at the HTC animated screen?
what ext partition do you have? (type and size)
Did you wipe your ext partition, data and system first?
Yes I followed all the instructions doing a full wipe I repartitioned the sd card I changed the swap to required values. I was stuck at the HTC screen.
Since then I have managed to get kingklix Legend2g1 to flash it took nearly 20 minutes to boot but now works perfect.
Still cant flash Jacheroski rom though but I think it was the swap that needed to change, I tried to put a large swap on to help speed the rom up but it only seems to flash on 96 swap.
Hey guys
I have a t mobile G1 rooted with Danger SPL and (Just Recently Flashed) Amon Ra 1.7.0 Recovery image.
All my troubles started after I saw that Super Froyo had a new bulid of 4.4, so I wiped my system, cache, sd-card, data (But not my boot) with my old Clockwork Mod 2.5.2. Everything went fine and dandy and the new bulid ran nicely, but as I reread over the directions for Super Froyo 4.4 i found that partitioning your SD card would increase speeds on this particular build. So I flashed Amon-Ra's recovery and then I partitioned my SD card to 512MB EXT3 / LinuxSWAP 64MB... After this I encountered alot of FC's.... So i flashed back over to CM6 Stable after partitioning again and now... Im stuck in countless bootloops.
Ive only had a somewhat-firm grasp on rom's so far, but i think my G1 is not technically bricked if i can access the recovery image full menu.
I need help ASAP.
Thanks.
Failuretolaunch said:
Hey guys
I have a t mobile G1 rooted with Danger SPL and (Just Recently Flashed) Amon Ra 1.7.0 Recovery image.
All my troubles started after I saw that Super Froyo had a new bulid of 4.4, so I wiped my system, cache, sd-card, data (But not my boot) with my old Clockwork Mod 2.5.2. Everything went fine and dandy and the new bulid ran nicely, but as I reread over the directions for Super Froyo 4.4 i found that partitioning your SD card would increase speeds on this particular build. So I flashed Amon-Ra's recovery and then I partitioned my SD card to 512MB EXT3 / LinuxSWAP 64MB... After this I encountered alot of FC's.... So i flashed back over to CM6 Stable after partitioning again and now... Im stuck in countless bootloops.
Ive only had a somewhat-firm grasp on rom's so far, but i think my G1 is not technically bricked if i can access the recovery image full menu.
I need help ASAP.
Thanks.
Click to expand...
Click to collapse
Do you have adb and fastboot working? You probably need to wipe a little extra. If you have fastboot working-
Code:
fastboot erase system -w
Then in AmonRA wipe everything and reinstall your rom of choice. I would recomend flashing Chromersmiths 4.5. It is complete with gapps so it is harder to screw up.
Do you have adb and fastboot working? You probably need to wipe a little extra. If you have fastboot working-
Code:
fastboot erase system -w
Then in AmonRA wipe everything and reinstall your rom of choice. I would recomend flashing Chromersmiths 4.5. It is complete with gapps so it is harder to screw up.
Click to expand...
Click to collapse
Actually... I feel kind of stupid right now, im a total noob when it comes to adb/flashbooting... if i have amon's recovery screen fully working, isnt there a way to restore it?
Basically i need an explanation of what ADB/Flashbooting is... Im sorry!!
Also a walk through would be helpful.
If you did one... you would be my hero
Quick Update: I just went on ahead and Flashed CM6 Stable and Gapps
It seems that im stuck in the 2nd boot animation, It just keeps repeating...
If we get past it then I have a working G1.
Failuretolaunch said:
Actually... I feel kind of stupid right now, im a total noob when it comes to adb/flashbooting... if i have amon's recovery screen fully working, isnt there a way to restore it?
Basically i need an explanation of what ADB/Flashbooting is... Im sorry!!
Also a walk through would be helpful.
If you did one... you would be my hero
Click to expand...
Click to collapse
The adb fastboot instructions at the top of the QA page are really good. It still refers to 1.5.3 but the link to the SDK is still good and the instructions are thorough. It is not a quick process but not hard and you will use adb and fastboot for the rest of your time with android. You will learn lots. I really can't make it any better than that post does it. If you spend an hour and get all that working, you'll be good to go.
Have fun.
Guess What!
I just wiped data using the Amon Ra
Flashed CM6
Gapps.
I have a working G1
Thanks For Your Help Anyway, I would rep you if I could!!!
i need help fast it keep rebooting all i did was upgrade cm6 and did a nandroid after that .. so i went to delete rom and reinstall it and it still boot loop now im stuck i hear reinstall the recovery but idk its not working
killacammiami said:
i need help fast it keep rebooting all i did was upgrade cm6 and did a nandroid after that .. so i went to delete rom and reinstall it and it still boot loop now im stuck i hear reinstall the recovery but idk its not working
Click to expand...
Click to collapse
need your EXACT process to help. which rom did you have? did you wipe all? which rom did you install? gapps? kernel? what recovery do you have? do you have any old nandroids? can you get into recovery?
i was on cm6 ext blue 17 vers then upgraded to dec 30 vs then i did a nandroid without rebooting ..... then when i restart it went into boot loop..... i can get into recovery and i wiped and installed diff rom and no luck still same thing\\\\.......\\
well i just fixed it ... i flashed another rom ....... idk y it worked but yea ..... idk thanks alot how do i delete this post?
wow i tryed to install the mau5 & cm6 rom but its not working sending me into reboot mode..but damage control v1 it didnt ...... i was using cm6 b4 this crap ..
killacammiami said:
i was on cm6 ext blue 17 vers then upgraded to dec 30 vs then i did a nandroid without rebooting ..... then when i restart it went into boot loop..... i can get into recovery and i wiped and installed diff rom and no luck still same thing\\\\.......\\
well i just fixed it ... i flashed another rom ....... idk y it worked but yea ..... idk thanks alot how do i delete this post?
Click to expand...
Click to collapse
1.always boot before you nandroid.
2.did you really get it? i don't think you can't delete a thread.
killacammiami said:
wow i tryed to install the mau5 & cm6 rom but its not working sending me into reboot mode..but damage control v1 it didnt ...... i was using cm6 b4 this crap ..
Click to expand...
Click to collapse
what? reboot into recovery, wipe EVERYTHING (full system,dalvik,cache) except your SD of course. once the wipe is done nandroid into an OLD known stable and then start over whatever you were doing. and always wipe before flashing, always boot before nanding. hope this helps.
I'm a noob so must apologise in advance. Looked through the forum and Google but couldn't find the answer anywhere.
Got my Incredible S-OFF with AlphaRevX, installed ClockworkMod and it was all fine.
Went to start putting Android Revolution HD 1.1.0 on my phone and downloaded the ClockworkMod Recovery EXT4 from the thread.
Now whenever the phone reboots it is stuck on the first HTC screen.
I can get into CWMR but nothing further. At the top it says "4EXTRecovery v1.1.1 RC1 Incredible S (CWMR 4) and says my partitions are currently fomatted EXT4.
I have tried all the different options in CWMR but can't get past the first screen.
Can anyone help, please be aware I am a noob.
Thanks
Try wipe and re flash the ARHD rom from recovery, it worked for me recently when i had a similar problem with lock at HTC screen on boot up
That has sorted it thank you