Database Develop

*** Flash X1 without PC - Micro SD Method ***

This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
This method works for any 6.1 and 6.5, and even radio rom.
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction

Thx, always using this system.

Sticky
Sticked this one!
Edit By Badwolve1: Unstickyed due to lack of posting, but reference in the X1 Thread (Here)

I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?

inuka said:
I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
http://wiki.xda-developers.com/index.php?pagename=HardSPL

I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx

hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
I've got the same proplem. Any suggestion?
Thanks!

I've got it working now, just d/l all the files here and follow the instructions
http://forum.xda-developers.com/showthread.php?p=2906948
Cheers!

jackleung said:
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
Click to expand...
Click to collapse
How do you format the micro-sd, can we use the card slot provided in laptops, becoause no adapter comes with the set

songao said:
I've got the same proplem. Any suggestion?
Thanks!
Click to expand...
Click to collapse
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.

hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
xmoo said:
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.
Click to expand...
Click to collapse
I also got the same problem when using the rom from this thread http://forum.xda-developers.com/showpost.php?p=2392404&postcount=1 but the flash of microSD method ran pretty well with this http://forum.xda-developers.com/showthread.php?t=431218&page=6

Does the device automatically reboot after it's installed? I just used this method and the device currently says:
'KOVSIMG.nbh - OK
OS - OK
Update Complete
UPDATE SUCESS'
It hasn't done anything since.

spr33 you take the battery out, put it back in and switch on

I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it

blackax said:
I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it
Click to expand...
Click to collapse
I was having the same problem as you, I tried everything finally I just used the kovsky RUU and used the pc update tool with it. it worked great. just make sure you take your sd card out before you do it or it will keep trying to search the card and say no image.

Problem X1 rom chang on english
I can't change rom on my X1 i have formated card on FAT32 my file name is ruu_signed.nbh i chnge the name on "Kovsimg.nbh" my device is set to tri color bar and on the screen i have Loading... and nothing else
can you help me ????

It works, I'm free and thank you
After weeks and weeks aof reading, reading, reading, making copious notes so that I had the process sorted from start to finish, I decided to bite the bullet tonight, yes, New Years Eve (well it is my new X1 after all ).
OliNex Hard SPL worked a charm, then during the micro SD method, the dreaded "no image file" message appears. RATS!
Numerous FAT32 processes, different ROMS and still the same message.
Tried the cable version using RUU and viola, I now sport the fantastic Touch IT v2.2 and NO VODAFONE
I would like to thank the more senior members for their cutting comments to witless noobs that made me read, search and read again.
Also to itje for his great ROM - have only just had a cursory scan so far as only just finihsed synch, and running like a dream. Donation certainly coming your way!
HAPPY NEW YEAR ONE AND ALL at XDA Developers from a very happy revitalised X1 owner!

ROM replacement
Moved original message to correct thread ...http://forum.xda-developers.com/showthread.php?t=445818&page=42
Has anyone more of an idea why the SD card method is causing so many to come up with the "No image file" message" ?
The USB version works for me, just would like to know the reason for error message - in case need to use it one day

BIG QUESTION:
Why some people can't flash from microSD card ??
I had the same issue
After a lot of trial and error, testing and testing, I arrived to this conclusion:
IMPOSSIBLE TO FLASH WITH microSD METHOD
(Nothing happens, "serial" message or "No image found" message popped up)
a) When I used an incorrect format (other than FAT32) on any brand card
b) With two Kingston cards properly formatted
I have successfuly flashed my X1 with unbranded cards and sandisk cards,
but after many attempts and format variants I NEVER achieved a successful flashing with kingston cards
Interesting...

Hi guys! i tried 2 flash my x1 ending in f***d up device.
I did the following:
1) running the hard_spl. The flashing started and at about 50% it stopped went back to the stripes screen telling me file not found...serial....all the things you guys described in the forum.
2) I created a card with a Kovsimg.nbh and restarted the device. Result was the same: File not found!!! but i did all like in the tutorial.
3) I tried again with hard_spl: First I got an Error 282 then 262. The device changes from stripes to grey screen the bar shows 0% ......thats all.
any suggestions??????????????????

So, I'm new to this

I see all these awesome "ROM's" and firmwares I'd like to have on my phone..and I download them, but I don't know how to install them on my phone.
I'm still running WM 5
Please help!!

anybody help a n00b out? WM5 sucks lol

First, you wanna get Hard-SPL (or HSPL). This allows you to get custom ROMS. Follow this great tutorial by navenedrob here. It will unbrand, unlock, and get HSPL on your phone.
Afterward, take a memory card and format it into FAT32 format. Add the .nbh file to your memory card.
Insert the memory card into your phone and hold down the media button (the one below the volume rocker) and press the reset button (the one next to the memory card slot) with the stylus. This will take you to the bootloader. Press the end key (power button) to start the update. Once the update is done, reset the device.
I would recommend this ROM from navenedrob. It is WM 6.5 and very stable. He is making a new one, but it still has bugs. To get the ROM go here.

dgourd said:
First, you wanna get Hard-SPL (or HSPL). This allows you to get custom ROMS. Follow this great tutorial by navenedrob here. It will unbrand, unlock, and get HSPL on your phone.
Afterward, take a memory card and format it into FAT32 format. Add the .nbh file to your memory card.
Insert the memory card into your phone and hold down the media button (the one below the volume rocker) and press the reset button (the one next to the memory card slot) with the stylus. This will take you to the bootloader. Press the end key (power button) to start the update. Once the update is done, reset the device.
I would recommend this ROM from navenedrob. It is WM 6.5 and very stable. He is making a new one, but it still has bugs. To get the ROM go here.
Click to expand...
Click to collapse
Thanks so much! I'm gonna need to buy a memory card for it and then I'll continue on and post here if I have any further questions. Thanks again.

Remember to get an SD card. Not SDHC. Our phone only has a max of 2 GB.

Remember SDHC works but not for flashing I have 4GB microSDHC with adapter which runs fine..

Ya I know but he is talking about flashing to a new ROM.

So the problem is with using SDHC for flashing ROMS, nothing to do with microSD right?
I do have a 1GB microSD with SD adapter and been trying to flash a new ROM for a couple of days with no success.
CheetahUnlocker runs fine for the first 2 steps, but when booting the phone in bootloader with the SD card and a CHEEIMG.NBH file on it, it will not flash the rom ever...

TREO 750 "beta testing expired"

Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks

Hello there if you look a couple of threads down on main form page there's a post by Navenedrob who gives step by step instructions on how to sucessful complete the whole process
I did it about 2 weeks ago as a newbie and it very easy to follow very good update

Also make sure you download and use his WM6.5 ROM. No expiration date ...

hlopez said:
Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks
Click to expand...
Click to collapse
Hi,
I'm sorry, I wrote that tutorial for people who couldn't use HARD SPL (A piece of software that lets you flash the phone) to get Windows Mobile 6.5.
Try formatting the memory card to FAT32 using a card reader, then from your computer, download the ROM here and paste it onto your memory card (ROM Link- http://forum.xda-developers.com/showthread.php?t=541417 ).
Load the memory card into the phone.
Where you've just loaded the memory card, there is a Reset button. It's tiny, and its located where the memory card slot is.
On the other side of the phone is the Media Button. It's the one below the volume buttons. Hold this button down and press the Reset key with your stylus.
The screen should load into the "Bootloader" mode and try to scan your memory card. If it recognises the CHEEIMG.NBH file, it will ask you to press the Call End key and then go on installing itself (I hope).
After saying all this, please note that I'm not an expert and had to experiment. I didn't however brick my phone with a Beta release so I'm giving you this in the hopes that it will work.
Just make sure you have the CHEEIMG.NBH file. It may have a different filename (anything that comes before .nbh), you just have to rename it.
Secondly make sure your card is formatted to FAT32. Google it if you don't understand or if you don't know how. I use a mac so formatting is easy.
Thirdly, familiarize yourself with starting up in Bootloader mode.
Have a play, I hope this helps.
eD

is my phone broken?

hello i am having problems with flashing a custom ROM. I've formatted a micro sd its 2GB. Then I added the ROM file, renamed it to kovsimg.nbh and started the phone as stated (by pressing the vol down button). Then the tri colour screen pops up then a quick screen comes which says no image path I have also... installed the hard spl thingy. Where am I going wrong? Please help !!!all want is reinsstal my xperia x-1 a new windows 6.1 how i can do this plz help my phone is give me this alert SİMCARD NOT İNSERTED'' Plz help me

Do you have press and hold the vol down and the power until the screen show"loading"???

i did bur it says no image ...what i can do?

Says no image??I don't have this problem...so I can't help you,sorry...

Hello you're not alone in the dark
My Xperia do it in the same way. So i hope we will get an answer.
Additional i have problems to use the Internet yet. After receiving a config SMS the applications which are using internetdata didn't get some. The connecting to provider or wifi seem OK but no data for the application.

Provided the card is read, make sure you formatted your card properly with FAT32 and placed renamed ROM file into the ROOT.

It's possible to read the card (after booting the phone). The card is Fat32 fomatted and the imagename is set. But it's not only the problem to flash using the CD-card. Also trying by using the sync-methode will fail. I get the splashscreen with the bar showing the percentage. In the state of 0% i get an error message. No recovery is needed, but i never get the phone flashed.

My problems is exackly the same

If it doesn't work use the USB method, it always works.

Hi VingZTV,
You're wrong please read my post #7 in this thread.
I called it sync method, cause you are using active sync.
cu HAndi

I encountered this problem too. My present X1 (3rd already) refused to hardSPL or do anything with both PC (stucked at 0%, connection errors etc) and SD method ("no image file" later stuck at "loading"). Previous ones worked with either SD or PC method
This time I tried different cables and PCs and couldn't hardSPL
nor was the SD card method working, tried different cards and formatted one to fat32 before putting image file
it seems the problem might be on X1's where SPL is stock 0.78 ?
Anyways for me it worked finally when I tried hardSPL with RUU to 0.52olinex ("X1_HardSPL.exe" file) on a different PC and cable with a formatted card inserted where 0.78olinex was renamed to kovsimg.nbh (so ready to flash hardSPL with SD method which didn't work befere). The phone was set to bootloader by the program and then started flashing the image on the SD! (the program reported error as usual)
phone flashed it once, restarted, did it again and was ready!
Then I had no problem to flash a ROM with SD method normally
So I don't know what could be the reason it worked or it was a coincidence maybe try to:
WARNING: AS ALWAYS YOU DO IT ON YOUR OWN RISK!
- insert a freshly formatted card with hardSPL file (0.78olinex perhaps) renamed to kovsimg.nbh
- sync with PC and try to hardspl PC way like above and maybe the phone will finally flash the SPL from the SD
- let us know if it worked

It still doesn't work
I used 128m microSD and formated to FAT32, only copy 0.78RUU_Signed.nbh to SD card, renamed to kovsimg.nbh. After I used VOL- and power bottom. It only showed me loading.....
I also tried 0.72, looks same. DID I do some thing wrong?
Thank you very for any response!

wmw6608 said:
I also tried 0.72, looks same. DID I do some thing wrong?
Thank you very for any response!
Click to expand...
Click to collapse
Try the way described above by me (leave the card with the image and use X1_HardSPL.exe to try to change SPL and so force phone to bootloader mode)

Btw i cant boot into windows
only freeze at SE logo
Any solution

kainjinez said:
Btw i cant boot into windows
only freeze at SE logo
Any solution
Click to expand...
Click to collapse
HardSPL and reflash
Try the way described in my post above if u have probles

Agreed I also tried already with the same method
Sent from my LT15i using xda premium

[q] please help with rom flash!

Hi, PLZ HELP ME! i just have run the Hard-SPL v1 on my xperia x1, and it was all fine, but then, i Used the KovskyAdvancedRUU (Task29 mode) in order to fix broken sectors of internal memory, and the process ended OK... but my X1 have restarted, and now,i dont go further than de "Sony Ericcson" screen when i shut it on.... If i go to the BOOT screen, It just stay in the "colours" screen.. (I have the Micro SD whit the ROM named kovsimg in my device.... so, PLEASE HELP! im kind of newie....

ALso, i just have formated the Micro SD card into FAT32, and have the room in the root...

You have done all things correctly until now.
1. Can you check your ROM name at your PC whether is 'kovsimg.nbh' or 'kovsimg.nbh.nbh'? (Correct name should be only one .nbh) I guess you renamed it to double .nbh already.
2. After confirm the ROM name is correct, remove the battery and insert memory card.
3. Put back the battery then press the volume button down, and power button together and HOLD BOTH BUTTONS UNTIL TRI COLOUR SCREEN APPEAR
4. If your ROM name is correct then it should start installation.
Hope this works for you..

HAve done it like 4 times... i checked and everything was allright... i tried with 3 different micro sd and nothing happened.... At the end, i just bored of triyng with the micro sd, and installed the rom with the cellphone connected to the pc (using the RUU kovsky)... but still dont know what goes wrong with the SD....

have you pull out the usb cable from pc when in the boot screen (after you finished perform task29)?