Hey guys, for some reason when i flash to xRom, it skips the setup wizard and the lockscreen doesnt show and my home and call buttons dont work. I took a log:
I took it after a wipe and flash.
Related
omg wtf do i do now?! my pc rebooted 31% into the flash.. it blue screened out of no where!
now its stuck on a IPL 2.21 screen!
this happened to me a few times as well. I just re-tried the flash from another machine and it worked fine.
but i cant establish a active-sync connection because the phone wont start it just stays at the 2.21 screen thats red/green/blue/white! omg im about to cry what do i do lol
I have seen the same screen, and have also had the computer blue screen on me probably 3 or 4 times now. When i plugged it into another machine with activesync, i ran the updater and it worked fine.
im trying it right now on 2nd pc still downloading the rom file tho
ok i was able to flash using another computer thank god!
:lol:
Can you post the steps of reflashing the wizard? I've tried a flash on another system, but it still doesn't work...
My steps:
1. Install Active Sync 4.1
2. Connect the wizard on usb
I've tried to downgrade the wizard with wizbackup. wizbackup need to flash IPL/SPL 1.01. The flash was ended without errors. But now the wizard starts and I only see the three colors and the version of IPL/SPL. Then I connect the wizard, Active Sync doesn't get a connection to the phone.
UPDATE:
In another thread I read that the wizard can't be flashed in IPL/SPL 1.01 without an OS. Can anyone verify this information or help me?
UPDATE II:
I finaly found out, that the phone can be restored with an image from the sd-card.
1. Put an image from the system to sd-card with psdwrite.exe
2. Power Off the phone and put in the sd-card
3. Power on the phone holding the camera key
4. Then the bootloader is coming up, press the voice key during 3s
5. The bootloader upgrades your phone from sd-card
Good luck!
that **** happens to me all the time, it always crashes to the boot loader and once its there you can just restart the upgrade no problem. if you need to boot into the boot loader then simply, from a turned off state, hit the wifi button, voice command button and power button, then release the power only and it will boot into the tri colored boot loader. then reinstall your image and soon you will be kickin it with your **** in it once again! booyakasha!
actually now that i think about it that will just go to the hard reset screen. you really just want to stick the stylus in the reset hole if you need to get to boot loader i think. i dont remember off hand.. just mess with it. if you break it just say you got it that way and exchange that ****
I installed the HTC Kaiser DLL replacement installer and then restarted my device. Now when it boots it won't go past the my info (owner info) screen. If I try to do anything at that screen whole device goes black and frozen I have to reset again. Anyone having this similar problem or know how I can fix it? I would really appreciate the help!
I was running WMobile 6.1 with the RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04 ROM
Once or twice somehow it got to the unlock screen but I can't get back there now I don't know how it got there the first times either just reset after reset.
Thanks
I was able to enter bootloader and reflash the rom. Held down camera button and used the stylus to push the little reset button next to usb port. Then ran rom updater as normal
http://tinypic.com/r/9u7q15/4
This is what's going on with my phone.
Downgrade to rc-29,
Use JF's guide to activate over wifi,
Root, flash the hard spl,
Then the radio (2.22.19.26I),
Then flashed cm-4.0.4,
Then partitioned your sdcard to 1.5gb fat32, 500mb ext3,
Then tried to do a nandroid restore of 4.1.11.1 that had been past the sign in screen,
Then removed the ext3 partition from sdcard, and now you are where you are now.
As you can see in the Video
Everytime i try to call, got to contacts, use the market, text i get a error message saying something suchas
The process (process.android.acore) has stopped unexpectedly, or The process (com.android.phone) or other errors similar to these.
When some one calls me it doesnt even acknowledge that, it just send them to voicemail and i'll never know it
I also cant touch the screen ... it isn't responding to touch, and the rotate isn't working anymore either, The Airplane mode comes on by its self
**Note, it was working perfectly fine the touch and everything until i partition the sdcard then a couple hours after i did that the phone seems as it if caught a virus so i don't know what to do i just basically want to use the market, call, & text.. because everything else works btw the touch screen sensor. so if you can help please do, if not i may just unroot it and send it to HTC, if i can't fix it ;/
This has nothing to do with development. Try posting in the correct section.
Reported
needs to be in Q&A
also need more information, is it rooted or not, if rooted what build is bein used
Best thing to do is wipe it and re-install the ROM.
Turn off your G1.
Turn it on while holding the home button. Wait for the recovery screen to appear.
Press ALT-W (This will wipe your phone's data!)
When it's done wiping, restart the phone, check if it works.
If not, then install the Cyanogen ROM again.
PSP_Hacker said:
Best thing to do is wipe it and re-install the ROM.
Turn off your G1.
Turn it on while holding the home button. Wait for the recovery screen to appear.
Press ALT-W (This will wipe your phone's data!)
When it's done wiping, restart the phone, check if it works.
If not, then install the Cyanogen ROM again.
Click to expand...
Click to collapse
anyone else notice her screen is mirrored? i think it was the video, but it threw me off for a sec... in any case, try wiping and reinstalling rom. if that doesnt work, unroot, go back to factory settings and see if the screen works then. if it does, retry the whole process (rooting) make sure you are using the correct radio and the correct spl. if you still cant figure it out, get an iphone
Don't make movies with a mirror..
could be a hardware problem? doubt it though
Hello
I am in a great panic mode.
I applied this lagfix : forum.xda-developers.com/showpost.php?p=7587405&postcount=417 and since I did it I cannot use my phone.
I am not able to start my phone. It shows me Galaxy S logo, and after that I hear the start up music but nothing on the screen (no animation). Pressing hardkeys does not do anything either.
Above all I cannot even enter my recovery mode. When I press volumedown+poweron button, the screen keeps showing me Galaxy S logo and it does not go any further.
Please help me if you know how to getaround.
Were you rooted when yoou applied update.zip?
Anyway,did you try to shutdown the phone removing battery,and then try entering recovery?
the fix did not mention I had to root my phone, it said it would self install.
Yes I did shut down after removing the battery, and then I am trying to get into recovery using volumedown+poweron button but I am not able to get into it. All I see is Galaxy logo and hear start up music after that with nothing on screen.
OK, I am able to get into recovery mode.. I was trying wrong combinations
Now what should I select I get these options:
1. reboot system now
2. apply sdcard:update.zip (will never do this again)
3. wipe data/factory reset (should I do this)
4. wipe cache partition
yes.. you should do 3.) wipe data. If that doesnt solve your problem, you need to flash firmware agian
somusingh said:
Hello
I am in a great panic mode.
I applied this lagfix : forum.xda-developers.com/showpost.php?p=7587405&postcount=417 and since I did it I cannot use my phone.
I am not able to start my phone. It shows me Galaxy S logo, and after that I hear the start up music but nothing on the screen (no animation). Pressing hardkeys does not do anything either.
Above all I cannot even enter my recovery mode. When I press volumedown+poweron button, the screen keeps showing me Galaxy S logo and it does not go any further.
Please help me if you know how to getaround.
Click to expand...
Click to collapse
Why did you choose to install something not on main page, something obviosuly not very tested and something 2 month old (god knows there are close to ten newer or more tested fixes).
If you can access download mode, than reflash. If not... Well, try the exotic methods (dont know them, as I have working 3 butons)
Hey, for a second I thought it did noy fix my problem as I did not get my animation screen and ony heard music.. But then suddenly it starts up
I think I lost my animation on start up though
I still see that MCR Scripts icon on app loader screen, How could I know if its enabled or disabled?
Thanks a lot guys.. XDA rocks .
dupel said:
Why did you choose to install something not on main page, something obviosuly not very tested and something 2 month old (god knows there are close to ten newer or more tested fixes).
If you can access download mode, than reflash. If not... Well, try the exotic methods (dont know them, as I have working 3 butons)
Click to expand...
Click to collapse
I regret doing something like that.. But it was really confusing as there are so many topics on the forum and I was really tempted to solve the lag issue I started facing recently (I installed too many apps).
hey i have the same problem.. my phone goes up into the Samsung logo and hangs there forever, occasionally blinking and making a weird vibration. i've tried factory reset but that doesn't help..
How do i flash firmware again?
glbc said:
hey i have the same problem.. my phone goes up into the Samsung logo and hangs there forever, occasionally blinking and making a weird vibration. i've tried factory reset but that doesn't help..
How do i flash firmware again?
Click to expand...
Click to collapse
Read the FAQs
Insanity cm 014/glitch
reflash the rom by odin will solve the problem
make sure your kenel is speedmod if u updated the rom from your sdcad，
enter into recovery ，do the wipe then updated ，disable all lagix ，all this work done u could updated the rom
Hi XDA-developers
Last night I wanted to flash my HTC One with the custom Google Edt. ROM (first time having an android and first time trying to flash custom ROM and all that stuff). Everything worked fine flashing to the ROM, unlocking bootloader and all, and then wanted to install my backup I did using HTC Sync Manager. Fortunately HTC Sync Manager wouldn't recognize my phone so I could not get into the backup. I tried flashing back to stock ROM, provided by Mike1986). That kinda worked, I have the stock HTC One ROM, but when I turn it on, I constantly get messages saying android.process.acore has stopped and Talk has stopped. Earlier on it said some other android.processes has stopped worked, but it doesn't say that anymore. The point where I am blocked is whenever I turn on my phone it wants me to download "A Personalize update is available". I can't seem to minimize or get around it, and when I try to press OK nothing happens. The Fast Boot is enabled, so I don't know how to get back to HBoot since I need to disable it to use the Powerbutton + volume down method.
TL;DRj
Anyone know how to get to Hboot without disabling Fast Boot option in settings?
UPDATE
Figured it out. When stuck at the Personalize Update window, I held the home button down and another window opened with all apps showing. Went into settings and turned Fast Boot off. Now I just hope I can fix the problem.