ok, I sorry read all the subject, almost, regarding Bootloader and Hardreset...I tell you all I try all of it, and my present Rom version, is of course not the original, dit try a fews roms, and now, would like to try a new one, but, but.....
Since I did the Olinet Hds, and after I installed, like the Itje, Smaberg rom, and, their are still buggy to my taste, I had a real hard time to goes back to the R3aa UK but, I could....
Now, I can't anymore reverse to bootloader mode holding all the recepices we do have on the forum...
Meaning, I could reisntall not the original stock, with the white screen holding the Reset with the Styllus, and the 2 silver key and the power , but, I am not looking for that solution I am needing the one tho enter the bootloader, and no, no, no, each time, when i press the 2 silver one, the volume the power, short or long mode, the Reset buton, the microcard with or without, reformated the microcard 32, Xperia, always enter the Xperia bootscreen not the blue, green and red one....
I frankly do wonder, if all the troubles we have, I am not alone is not coming, sorry from the Olinet and, if so, could it be possible to truly remove the Olinet from the system, and that could perhaps help?
I do not like to point to anybody but, we do have something wrong with the booloader, since installing third party roms...
thanks, still any kind of help would be truly appreciated...
OK, I found something, like
I had to do again and from the PC, the HardSPL, and, even, I could at least see the bootloader screen....
Then I removed the battery reinstalled the microcard, just reformated and with the new Kovsimg.nbh installed.....
Whent again to use from the PC, the ROMUpdateUtilite.exe with the Rom, PCTec4U.nbh, and from there after the activesync was ok, The kovsimg.nbh took over, and finally, Finally I could install that Rom...
In fact, I still do not know why the Xperia, by itself is not able anymore to enter bootloader mode anymore, and, second, I had a stong feeling, when the HardSPL is installed once, we do not need to use it anymore....I supose not...
Hope that would help othes members...
Related
First of all i do not know where to post this. I have had a HTC wizard for over a year now. it has been working fine after cooking up wm6 and installing it for 6 months. today when i restartet the phone pulling the battery out and inserting it, the phone starts up, then the blue screen comes and shows ispl etc, then windows image shows, there it stops. i do not know what to do. It has been a while since i did pocket pc modding now, and i have forgotten all about it.
Alexander, [email protected]
Maybe something crashed the OS software.
Hope you have a system backup, or at least PIM backup using ActiveSync because what you need now is a hard reset.
Punching the reset hole (next to IR window) while holding CommManager+VoiceDial, then press "Dial" as prompted.
how do i hard reset my dash/s620?
i have tried hard reset
i have hard reset the phone. i do not have any backup in active sync. and i dont think that matters. because my phone does not connect to activesync since it does not start up. and in the three colored boot mode the phone is not detected by active sync. when i hard reset the phone it just came to the same point and freezed
If you didn't touch the ROM for long time, then it is probably a hardware failure...
lovemy318 said:
how do i hard reset my dash/s620?
Click to expand...
Click to collapse
READ YOUR PHONE MANUAL, and THIS IS NOT DASH FORUM.
hard to believe
First off, thanks for fast responses.
It cant be hardware(Not as a total theory of course) or likely not, because phone was not touched by water, shock, bumb fire or anything. it laid on my desk, worked, laid on my dask more, freezed. and it has been working for 6 months with wm6. is there anyway i can flash something into it. without activesync, but in the three colored boot mode?
Get into bootloader, plug in your usb cord and give it a minute...ON THE TRI-COLORED SCREEN do you see in the bottom corner "USB"??? If yes, you are OK. Get a stock rom such as the Tmo 2.26 and flash that. If you do not see "USB" in the bottom corner then as far as I know, you are fukd.
For more info on issues, read the linky in my siggy. There is valuable info there that may help with other ways to flash a rom.
Good luck.
i see usb
thanks, guess i am not fked then
Only problem is i have forgotten all about this now, and that i am sorry for.
But i have to ask you, as from norway wich stock rom to choose, what is stock rom, and when you say bootloader, is that an expression for the three colored screen or is that a program, that can flash in three colored screen? Thanks, i do not expect an answer on this noob questions, but i would really apreciate answers.
stock rom & bootloader
stock rom is the rom which comes with ur phone while purchasing it.. u can call it base rom..bootloader is tri-coloured screen which is bios for ppc if it gets fked then phone is bricked..next time if u cant boot up, then u can flash ur phone with the help of bootloader...
that was fast
thanks, but i do not think i have the rom that came with my mobile phone:/
and i do not know how to flash from tri colored screen, because all the files i have tried cant detect my phone.
ipl adn spl are 3.08 if that helps anything.
that was fast
is there an app you use to flash from tri colored
there is no need for any app, just connect ur phone to tri-coloured screen..u willl see usb in down left corner.. then ur phone is connected then run RUU utility.. if any problem comes i am online at hotmail... [email protected]
Can you power down? If not, remove battery for 1 seconds, the re-insert. Then press all at once the camera, comm and power buttons (or I believe you can also press the camera and soft reset. It is in the wiki explaining, as are some stock roms. Use any stock rom if you plan on flashing a cooked rom. The Tmo 2.26 is a decent stock rom, there is a 3.08 on the forum somewhere that you can also use. Get a stock rom. Get into the tri-colored bootloader. Look to see if it says usb in the bottom corner. If yes, connect your cable and using the ruu from the stock rom, flash your phone. Once a stock rom is installed follow the directions to cid/sim unlock your phone. Once unlocked, you can flash any cooked rom.
PS- I am assuming you have a G3 phone.
PPS- reading the wiki and the stickies are very helpful. Give them a try.
im sutch a noob
yeh i got same problem... i will try a hard reset but im at school... hope it fixes it... i got imate jasjam... BETTER WORK OR I WILL KILL MY BROTHER 4 STUFFING AROUND WITH MY PHONE
im sutch a noob
gah... it diddent work what do i do now????
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
did u try to hard reset it?
can u still enter bootloader mode?
if u can still enter bootloader then try flash another ROM
I think there is a timebomb in the Rom you are using.
Go to bootloader menu, connect to usb, and try to flash an other rom by installing via Windows.
okay, but what is the hard reset? Is that a red button on my device back?
if it is, i try this, but it isnt solve my problem.
and how i can go the bootloader menu?
thank a lot.
Don't worry...just try the hardreset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If this does not work...just flash another rom...it really seems to have this timebomb issue...you don't have a hardware problem...it's just the software.
here's a video instruction for the hard reset:
http://www.youtube.com/watch?gl=DE&hl=de&v=Eqg8XFJyHBY
thanks a lot, the hard reset worked!!!
thanks!!!
i will flash a new 6.5 ROM.
VorosAdam said:
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
Click to expand...
Click to collapse
I'm curious wich rom you use?
you CHICKEN >"<
quack quack
vodanh2025 said:
you CHICKEN >"<
Click to expand...
Click to collapse
lol chicken?
Sorry, but its dont solve my problem, all 6.5 ROMs go to freeze a few sec/minutes when i use... And the phone function and network connection also dont work. Big trouble (
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
VorosAdam said:
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
Click to expand...
Click to collapse
Flash the latest Hard SPL http://forum.xda-developers.com/attachment.php?attachmentid=179550&d=1240516932
I'm curious, what way did you flash these roms. Are you using USPL or HSPL or have you just flashed these straight from stock?
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
VorosAdam said:
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
Click to expand...
Click to collapse
2 versions of HSPL, 1.14 & 1.56. You will need HSPL 1.56 on your device to be able to use roms based on 1.56+
thanks a lot, i flash the new HSPL, and now, all phone function back to normal!!!
THANKS!!
Impressed by the support
Hello,
I was watching this thread continously and whenever i try to jump in to help you with tips about flashing, someone would have done it already.
I feel somewhat releived to know that your Kit(d) is back on track.
I like this forum very much not just for the solutions but also for the people's attitude.
this morning, I restarted my x1 because it was awfully slow this morning. so after I restarted it, it stayed at the sony ericsson splash screen for long time and didn't do anything. I tried to reinstall the rom through SD and it didn't work. Then I hardspl-ed it and tried to reinstall one of my old kovsimg.nbh in it, then now....it won't even turn on!!!
Did I brick my x1??? HOW IN THE WORLD CAN I FIX IT?
my battery is fully charged btw. PLEASE HELP. THIS IS URGENT!!!!!!
I've checked on different forum guides on here and none of which seem to be having what I am looking for.
UPDATE: i just plugged in my phone to the computer and then it popped out a notice on my computer saying that the device is not recognized. "the device is malfunctioned and does not recognize it."
@[email protected]" so what am I to do? do I return it to the store and get them to fix it or is it better just to give it up?
Have you tried a hard reset?
I have, but still no reaction...
I am guessing the x1 is still safe in a sense since the red light is still on.
Can you put it in booloader mode? If so, what version of the spl do you have?
the Phone won't even turn on. no possible way to get into bootloader. when you say spl as in hardspl and also softspl. i'm not quite sure. i just found it on this forum in the latest forum updates.
asian_boi said:
the Phone won't even turn on. no possible way to get into bootloader. when you say spl as in hardspl and also softspl. i'm not quite sure. i just found it on this forum in the latest forum updates.
Click to expand...
Click to collapse
Have you tried taking the battery out for ten seconds, put the battery back in, then hold the power and volume down keys until you see the tri color screen. Does this work?
yes. I've done that.
the phone still can't be turned on.
need help too
i just tried to Hard SPL my phone, and now i'm on the bootloader screen
showing KOVS110
SPL-0.72.OliNex
Micro P1 -787
Micro P2 -707
and it says continue to upgrade ROM please wait. i've been waiting for for a long time. it stucked there. i take off the battery for few second and put it back it shows the same screen again. And i need to use MTTY to boot it to get into window mobile. i was trying to Hard SPL the NEW ORIGINAL X1 ROMS INCLUDING R3xxxxx update 1.10.2009. and i can't upgrade it. everytime i restart my phone it goes back to the bootloader screen and freezed there. then i need to use MTTY to boot it and bring it alive again. can anyone help me out with this? pls
I think I made a stupid mistake...
I went to consult this thread (forum.xda-developers.com/showthread.php?t=600340), just being curious you know, and when I saw the Windows 7 style Boot Logo, I downloaded and installed it.
The problem : The cab was made for the HTC Prophet... and now my Kaiser doesn't get past the ROM's 1st boot image and reboots before dsiplaying the radio version #.
Is my phone bricked?
if it was a cab file that you applied by running from within the phone via file explorer, then it is highly unlikely that your phone is bricked. however, if it won't boot, kiss your data goodbye and give the phone a hard reset. that should fix it but you'll have to set up all your programs and restore your contacts and messages from backups (assuming you follow the practice of making regular backups of critical data).
if you applied something by "flashing" it to your device (usually using a special procedure that may involve your pc), then you may have truly bricked your device.
Thanks ASCIIker.
I tried doing a hard reset. It now goes so far as displaying the version numbers but stills reboots in a loop right after.
Any other ideas?
I guess if I can't boot that means I can't reflash either.
jpchaput said:
Thanks ASCIIker.
I tried doing a hard reset. It now goes so far as displaying the version numbers but stills reboots in a loop right after.
Any other ideas?
I guess if I can't boot that means I can't reflash either.
Click to expand...
Click to collapse
can you enter boot loader mode? simultaneously hold side OK and POWER buttons together and reset with stylus.
if you can then flash your carrier latest rom .
just to clarify, you can flash as long as you can enter boot loader.
and just to correct what faria said, the correct way to enter boot loader is to hold down the CAMERA button while doing soft reset...keep the camera button pressed until you see a screen with red, green, blue, and white stripes. this is the boot loader screen.
once here, you can flash any ROM, etc.
Thanks faria. I had fun pressing Power, OK and trying to do a hard reset. Kinda like playing Kaiser Twister!
Power and Camera did work though. I think that's what you do when you flash from the microSD right?
I'm telling you guys I am so f'in relieved right now as I'm loading my latest factory ROM from archives. So thanks again to both of you.
Back from the dead and to trying out ROMs in a bit then. How's KaiserTouch compared to HyperDragon IV? And is Rhodium 6.5 or less?
Actually happy 1st day rodhium faria v1. It looks well worth giving it a shot!
jpchaput said:
Thanks faria. I had fun pressing Power, OK and trying to do a hard reset. Kinda like playing Kaiser Twister!
Power and Camera did work though. I think that's what you do when you flash from the microSD right?
I'm telling you guys I am so f'in relieved right now as I'm loading my latest factory ROM from archives. So thanks again to both of you.
Back from the dead and to trying out ROMs in a bit then. How's KaiserTouch compared to HyperDragon IV? And is Rhodium 6.5 or less?
Actually happy 1st day rodhium faria v1. It looks well worth giving it a shot!
Click to expand...
Click to collapse
Your are most welcomed
as for my rhodium rom, im trying to fix an undocumented feature that cropped up
I have installed android on my Kaiser (Incubus26Jc_'s Super FroYo RLS15 All Language) and I want to go back to my custom WM ROM, but I've never managed to flash a ROM from the SD card, although I've respected all steps (SD card FAT32 formated, WM ROM renamed as KAISimg.nbh and put on SD root, together with KAISDIAG.nbh, pressed power & camera button and pushed the reset button)... I can get to the 3-color bootloader but for 1 second appears a message (I think is something like "no image file" but I cannot read it because it dissapeared too quickly) and then the word "serial" at the bottom of the 3-color screen, and it remains like this until I make a new reset...
As I cannot use ActiveSync anymore (due to Android OS) and I cannot flash through USB, I have no option now to get back to WM!!!
Could somebody give me an advice how to do it?
Thanks in advance!
...nevermind... I've solve it... just look at this (for others with same problem):
http://forum.xda-developers.com/showthread.php?t=423486
I have to say, this is a great forum, I can find almost always a solution for my problems!
I got the same problem, I flashed a tpc rom (well my brother actually) a while back. And I was never able to load up the bootloader with all the key combinations I can think of
(hard reset, power+camera, batery out and turn on+camera)
I also took a look at the link above me. I couldn't find an answer .
Someone please help me out.
mmh, Is there no1 with a solition to fix this>
I really hate the fact the tpc rom prevented me going into mah bootloader.