I think I made a stupid mistake...
I went to consult this thread (forum.xda-developers.com/showthread.php?t=600340), just being curious you know, and when I saw the Windows 7 style Boot Logo, I downloaded and installed it.
The problem : The cab was made for the HTC Prophet... and now my Kaiser doesn't get past the ROM's 1st boot image and reboots before dsiplaying the radio version #.
Is my phone bricked?
if it was a cab file that you applied by running from within the phone via file explorer, then it is highly unlikely that your phone is bricked. however, if it won't boot, kiss your data goodbye and give the phone a hard reset. that should fix it but you'll have to set up all your programs and restore your contacts and messages from backups (assuming you follow the practice of making regular backups of critical data).
if you applied something by "flashing" it to your device (usually using a special procedure that may involve your pc), then you may have truly bricked your device.
Thanks ASCIIker.
I tried doing a hard reset. It now goes so far as displaying the version numbers but stills reboots in a loop right after.
Any other ideas?
I guess if I can't boot that means I can't reflash either.
jpchaput said:
Thanks ASCIIker.
I tried doing a hard reset. It now goes so far as displaying the version numbers but stills reboots in a loop right after.
Any other ideas?
I guess if I can't boot that means I can't reflash either.
Click to expand...
Click to collapse
can you enter boot loader mode? simultaneously hold side OK and POWER buttons together and reset with stylus.
if you can then flash your carrier latest rom .
just to clarify, you can flash as long as you can enter boot loader.
and just to correct what faria said, the correct way to enter boot loader is to hold down the CAMERA button while doing soft reset...keep the camera button pressed until you see a screen with red, green, blue, and white stripes. this is the boot loader screen.
once here, you can flash any ROM, etc.
Thanks faria. I had fun pressing Power, OK and trying to do a hard reset. Kinda like playing Kaiser Twister!
Power and Camera did work though. I think that's what you do when you flash from the microSD right?
I'm telling you guys I am so f'in relieved right now as I'm loading my latest factory ROM from archives. So thanks again to both of you.
Back from the dead and to trying out ROMs in a bit then. How's KaiserTouch compared to HyperDragon IV? And is Rhodium 6.5 or less?
Actually happy 1st day rodhium faria v1. It looks well worth giving it a shot!
jpchaput said:
Thanks faria. I had fun pressing Power, OK and trying to do a hard reset. Kinda like playing Kaiser Twister!
Power and Camera did work though. I think that's what you do when you flash from the microSD right?
I'm telling you guys I am so f'in relieved right now as I'm loading my latest factory ROM from archives. So thanks again to both of you.
Back from the dead and to trying out ROMs in a bit then. How's KaiserTouch compared to HyperDragon IV? And is Rhodium 6.5 or less?
Actually happy 1st day rodhium faria v1. It looks well worth giving it a shot!
Click to expand...
Click to collapse
Your are most welcomed
as for my rhodium rom, im trying to fix an undocumented feature that cropped up
Related
First of all i do not know where to post this. I have had a HTC wizard for over a year now. it has been working fine after cooking up wm6 and installing it for 6 months. today when i restartet the phone pulling the battery out and inserting it, the phone starts up, then the blue screen comes and shows ispl etc, then windows image shows, there it stops. i do not know what to do. It has been a while since i did pocket pc modding now, and i have forgotten all about it.
Alexander, [email protected]
Maybe something crashed the OS software.
Hope you have a system backup, or at least PIM backup using ActiveSync because what you need now is a hard reset.
Punching the reset hole (next to IR window) while holding CommManager+VoiceDial, then press "Dial" as prompted.
how do i hard reset my dash/s620?
i have tried hard reset
i have hard reset the phone. i do not have any backup in active sync. and i dont think that matters. because my phone does not connect to activesync since it does not start up. and in the three colored boot mode the phone is not detected by active sync. when i hard reset the phone it just came to the same point and freezed
If you didn't touch the ROM for long time, then it is probably a hardware failure...
lovemy318 said:
how do i hard reset my dash/s620?
Click to expand...
Click to collapse
READ YOUR PHONE MANUAL, and THIS IS NOT DASH FORUM.
hard to believe
First off, thanks for fast responses.
It cant be hardware(Not as a total theory of course) or likely not, because phone was not touched by water, shock, bumb fire or anything. it laid on my desk, worked, laid on my dask more, freezed. and it has been working for 6 months with wm6. is there anyway i can flash something into it. without activesync, but in the three colored boot mode?
Get into bootloader, plug in your usb cord and give it a minute...ON THE TRI-COLORED SCREEN do you see in the bottom corner "USB"??? If yes, you are OK. Get a stock rom such as the Tmo 2.26 and flash that. If you do not see "USB" in the bottom corner then as far as I know, you are fukd.
For more info on issues, read the linky in my siggy. There is valuable info there that may help with other ways to flash a rom.
Good luck.
i see usb
thanks, guess i am not fked then
Only problem is i have forgotten all about this now, and that i am sorry for.
But i have to ask you, as from norway wich stock rom to choose, what is stock rom, and when you say bootloader, is that an expression for the three colored screen or is that a program, that can flash in three colored screen? Thanks, i do not expect an answer on this noob questions, but i would really apreciate answers.
stock rom & bootloader
stock rom is the rom which comes with ur phone while purchasing it.. u can call it base rom..bootloader is tri-coloured screen which is bios for ppc if it gets fked then phone is bricked..next time if u cant boot up, then u can flash ur phone with the help of bootloader...
that was fast
thanks, but i do not think i have the rom that came with my mobile phone:/
and i do not know how to flash from tri colored screen, because all the files i have tried cant detect my phone.
ipl adn spl are 3.08 if that helps anything.
that was fast
is there an app you use to flash from tri colored
there is no need for any app, just connect ur phone to tri-coloured screen..u willl see usb in down left corner.. then ur phone is connected then run RUU utility.. if any problem comes i am online at hotmail... [email protected]
Can you power down? If not, remove battery for 1 seconds, the re-insert. Then press all at once the camera, comm and power buttons (or I believe you can also press the camera and soft reset. It is in the wiki explaining, as are some stock roms. Use any stock rom if you plan on flashing a cooked rom. The Tmo 2.26 is a decent stock rom, there is a 3.08 on the forum somewhere that you can also use. Get a stock rom. Get into the tri-colored bootloader. Look to see if it says usb in the bottom corner. If yes, connect your cable and using the ruu from the stock rom, flash your phone. Once a stock rom is installed follow the directions to cid/sim unlock your phone. Once unlocked, you can flash any cooked rom.
PS- I am assuming you have a G3 phone.
PPS- reading the wiki and the stickies are very helpful. Give them a try.
im sutch a noob
yeh i got same problem... i will try a hard reset but im at school... hope it fixes it... i got imate jasjam... BETTER WORK OR I WILL KILL MY BROTHER 4 STUFFING AROUND WITH MY PHONE
im sutch a noob
gah... it diddent work what do i do now????
hi if anyone can help thatll be greatly appreciated. I just bought an att tilt 8925, and well this is what happens. it boots up and goes into windows screen and then as soon as it goes into the main screen it vibrates a whole bunch of times and then just shuts down. can't get it to active sync to reflash because it wont stay on after it goes into the main screen any help would be appreciated!
Where did you buy this Tilt? Did this happen straight out of the box or have you already flashed it?
Search on how to manually get into boot loader and re flash; http://forum.xda-developers.com/showthread.php?t=383904
i bought it like that. the phone is in great condition. all features seem to work but i think the guy did a hackjob on the rom so it's not working right and im all new to trying to get it to work.
Since it's new... start with some baseline work.
1. Do a hard reset.
2. Record ROM and radio versions
3. If it comes up... consider loading the ROM of your choice.
I see you're new here so PLEASE read my signature.
Thanks,
Your best bet would be, download the OEM official Tilt ROM, Manually get into boot loader, then flash it. There are also other methods of flashing such as from your Sd card. The previous mentioned link has allot of answers.
okay i just tried entering bootloader but it wont get into the screen. i hold the camera buton and hold the soft reset button at the bottom of th phone but it just boots up normally. anything im doing wrong?
ok, I sorry read all the subject, almost, regarding Bootloader and Hardreset...I tell you all I try all of it, and my present Rom version, is of course not the original, dit try a fews roms, and now, would like to try a new one, but, but.....
Since I did the Olinet Hds, and after I installed, like the Itje, Smaberg rom, and, their are still buggy to my taste, I had a real hard time to goes back to the R3aa UK but, I could....
Now, I can't anymore reverse to bootloader mode holding all the recepices we do have on the forum...
Meaning, I could reisntall not the original stock, with the white screen holding the Reset with the Styllus, and the 2 silver key and the power , but, I am not looking for that solution I am needing the one tho enter the bootloader, and no, no, no, each time, when i press the 2 silver one, the volume the power, short or long mode, the Reset buton, the microcard with or without, reformated the microcard 32, Xperia, always enter the Xperia bootscreen not the blue, green and red one....
I frankly do wonder, if all the troubles we have, I am not alone is not coming, sorry from the Olinet and, if so, could it be possible to truly remove the Olinet from the system, and that could perhaps help?
I do not like to point to anybody but, we do have something wrong with the booloader, since installing third party roms...
thanks, still any kind of help would be truly appreciated...
OK, I found something, like
I had to do again and from the PC, the HardSPL, and, even, I could at least see the bootloader screen....
Then I removed the battery reinstalled the microcard, just reformated and with the new Kovsimg.nbh installed.....
Whent again to use from the PC, the ROMUpdateUtilite.exe with the Rom, PCTec4U.nbh, and from there after the activesync was ok, The kovsimg.nbh took over, and finally, Finally I could install that Rom...
In fact, I still do not know why the Xperia, by itself is not able anymore to enter bootloader mode anymore, and, second, I had a stong feeling, when the HardSPL is installed once, we do not need to use it anymore....I supose not...
Hope that would help othes members...
I've been waiting for hours for someone to help me and I searched and searched, I can't find any help!!! I have to go to work soon and I've been on this screen since 7:30AM EST!
Looks like I'm stuck at the boot loader screen and it goes back to it when I do a soft rest. I can't do a hard reset since I can't turn off the phone.
I think it's the bootloader screen.
Says RUUNBH on the top right corner and the screen is red, green, blue and white which these codes or whatever.
Took the battery out for a few and it went right back to that same screen.
Can someone help me bring back my Rhodium to stock???
EDIT: I might of posted this in the wrong section. Should this be in Rhodium General?
*UPDATE*
ark666 found the stock rom for T-Mobile HTC TP2 and I did a flash to get it back! Thank you so much ark666!!!
Flash stock rom.
I have no idea on how to do that, I searched how-to's but I can't find any full instructions or where to get the stock rom for T-Mobile HTC TP2.
This is the worse ever!!! Somebody please!!!
Isn't this the best site for things like this?
Try a manual hard reset? The instructions should be in your manual.
It says while the phone is off to HOLD SEND/END key with the power until the message comes up. The phone wont turn off unless I take out the battery for me to do a hard reset.
EDIT: I took the battery out then put it back in. The phone is now off, I hold the buttons and did the hard reset. It went right back to the boot loader screen.
hi,
what happend after you hard reset the device?
regards,
twisted
Asked me to press the VOL UP button to reboot. I did and it went right back to the boot loader screen. A flash happened on the screen when I try a soft reset and it says really quickly!..."NO IMG FILE" then it goes back to the 4 color screen.
EDIT: Image below on how my screen is since 7:30 AM EST!!!
on some device, active the RUU, connect it to PC & press soft reset button (the one in side the battery cover).
don't know if it help, just try that
good luck
Thanks for the reply, but that was the first thing I tried. Looks like I will have to go to work with no phone! This is crazy on how this can't be resolved.
Looks like you've basically erased the flash I'd say...
If you can get the t-mobile image, then try flashing that back to the device... If you connect a usb cable to your device, at the bottom, where it says serial it'll change to usb...
Or, if you have a goldcard, maybe try installing another image. But I'd say you're best to install the t-mobile image if you can get one?!
Ok so where can I get an image that will work on my phone? I also will need instructions on how to do it properly.
HeavyComponent said:
Ok so where can I get an image that will work on my phone? I also will need instructions on how to do it properly.
Click to expand...
Click to collapse
Where are you from? Can you find the rom on your tmobile site?
Or, creat a goldcard, copy the RHODIMG.nbh into the root of the card and try flashing that...?
As far as I know, your device is not bricked, you simply need your original supplier rom...
I replied to the PM (basically do set 16 0 command in mtty)
but I see your photo now - you have 0.85.1000 SPL? that's mfg SPL so if "set 16 0" did not help (you didn't describe what you did to the phone when this happened), you can just take any official rhodium ROM and flash it
sorry if I misread your photo... quite blurry
Ok that's my main problem that I've been having. Where can I get an official Rhodium ROM and how do I do a flash? I've been searching all morning.
And yes 0.85.1000, that's what it says on the screen.
I tried to this ROM...Link: http://forum.xda-developers.com/showthread.php?t=548546
Did the goldcard, but I think I did it wrong. I added the RHODIMG to the SD then tried to update my TP2. That's when I got an error saying it's not for PDA and how I need to update my utility.
I got the steps to do the goldcard correctly, I just want to take another shot at updating this ROM.
lovelldr said:
Looks like you've basically erased the flash I'd say...
If you can get the t-mobile image, then try flashing that back to the device... If you connect a usb cable to your device, at the bottom, where it says serial it'll change to usb...
Or, if you have a goldcard, maybe try installing another image. But I'd say you're best to install the t-mobile image if you can get one?!
Click to expand...
Click to collapse
hard reset doesn't erase the OS image.
HeavyComponent said:
Ok that's my main problem that I've been having. Where can I get an official Rhodium ROM and how do I do a flash? I've been searching all morning.
Click to expand...
Click to collapse
see my PM first, maybe set 16 0 will be enough.
is your SPL version really 0.85.1000? how did you get this phone? what happened when it got stuck on bootloader screen?
as for flashing, see xdadev wiki on rhodium.
Ok, will try what you PMed me. Brb!
It says 0.85.1000 on the screen so I guess so and I got it from T-Mobile. Ordered it through Customer Service.
post #15 has been updated to let you know what I was trying to do.
HeavyComponent said:
Ok, will try what you PMed me. Brb!
It says 0.85.1000 on the screen so I guess so and I got it from T-Mobile. Ordered it through Customer Service.
post #15 has been updated to let you know what I was trying to do.
Click to expand...
Click to collapse
then the set 16 0 will work just fine
weird the rom didn't work though
I have just flashed the 6.5 rom which you flashed
It does change the spl to 0.85 and i have the exact the sameimage which you have shotted during the flash process. But the process of this rom's flashing has two stage, it will restart after first 10% and show up the image which you shotted and upload, and continue afterwards. i guess ur goldcard has the problem so it stops and stucked there. Try other sign roms would be a better solution.
Hello xda, so yet another person took the plunge into flashing a rom. Im not sure what I did that was wrong because the install went perfect, it made it to 100 percent and restarted my phone like it was all well and good, but it wasnt. It just sits there perpetually restarting. Believe me I have been looking unfortunately, I didn't seem to find anything that helped. From the threads I read it sounds like I can just go to the boot loader, plug in my phone, then place a stock rom from alltel on my internal storage and flash that, or maybe I was mistaken with what I read. Either way I can't get that to work I can get to the boot loader and hook it to my computer, and the computer will say something connected, but it doesn't show up as a removable storage device or anything. This is the rom I used http://forum.xda-developers.com/showthread.php?t=553844 this is also the tutorial that I used http://forum.ppcgeeks.com/showthread.php?t=36062
Please, please give me some help.
me too
Anyone have any ideas? I tried using the HardSPL from here:
http://forum.ppcgeeks.com/showthread.php?t=35839
and I tried may different ROMs with the same problem... So i don't think it's the ROM.
Thanks in advance!
i was able to 'unbrick' my phone...
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. load the bootloader
3. plug the phone to the computer
4. go to sprint.com and get the Rom from them and just use their exe
now it's back to WM6.1
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
score3 said:
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
Click to expand...
Click to collapse
I don't know how offical it is, but I have loaded WM6.5 on my Sprint CDMA Diamond just fine.
Alright thank you that worked, I thought I was going to have a diamond shaped paper weight for a minute. I do believe that there are indeed 6.5 roms for the diamond, but I have no idea why this rom didn't work. Thanks for the help.
so I got mine to work with a wm6.5 rom.
this is what i did:
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. then get this wm6.5 ROM: http://forum.ppcgeeks.com/showthread.php?t=74084
this ROM is awesome!
Hope that works for you too.
You Bricked your Diamond
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Bmagee4716 said:
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Click to expand...
Click to collapse
Yes thats pretty important to know when you are messing with roms, also make sure to note the boot loader screen which is reset, back, vol down, and power. That is how I fixed my phone. This tutorial is a nice tutorial to look over. http://forum.ppcgeeks.com/showthread.php?t=36062
www.everythingdiamond.info/ this site has cdma versions theyre pretty good
Yeah I actually got my latest rom from there, thanks for all the help everyone you were a god send
check everythingdiamond.info or ppcgeeks.com . Both of those sites have stickies dealing with this and all the roms you'll find there are for cdma phones.