Hey guys n girls,
my windows lappy has died so im stuck with my netbook that has linux, i put a topaz 6.5 rom on before hand but didnt change the radio, its constantly crashing now so ive hard reset it but my incoming sms have no name or number and my signal doesnt go above 2 bars!! haha can someone explain this new flashing from microsd ive heard about so i can put udk's leo r1 on with the latest radio rom to see if its fixed!! thanks in advance keep up the good work!!
just a quick update ive flashed a new rom and radio, but still between 0 and 2 bars signal, haven had any blank text messages yet, any ideas as even with 0 bars when i call out it sounds really clear, defo cant be a network issue ither.
Related
Hi
Tried looking through all the threads and checking what I have done but still no joy hence post.
Have upgraded my old BA PH20B (I have another one so no panic) to WM5 with the latest WM2k5_AKU3.2_32mb_v1.3.2 setting Operator to ORANG001 (Orange UK).
1st time I tried everything seemed fine except although I had a signal from Orange I couldnt ring the phone (went to answer machine) and if I tried calling out the call disconnected with 0min 0sec calltime. I did receive a text message saying I had missed a call (me calling phone to test). But couldn't make or receive calls.
So I tried again from scratch twice and both times I have no signal and in Device Info have "Radio version: NONE" - followed instructions to the letter anyone any ideas?
Cheers
RichardC
ps. I can re-flash ROM OK.
this happened to me, too. but only when i changed batteries...
try to soft reset until the word NONE is replaced by the radio rom version (during boot up).
good luck!
Thanks for that, did soft reset and suddenly I have a radio ROM, so removed battery and inserted SIM then no radio again. Soft reset and radio back...weird
Now I can make calls and receive text but can't call phone (engaged or answerphone, maybe network I guess) but also GPRS connection info wrong so guess better start searching for info on that now. lol.
Thanks for the tip.
Check out my signature - use the links provided.
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
Makes sense thanks...just the GPRS issue now. lol
Just stepped through GPRS settings not changing anything but clicked OK at the end and it works now. Looks like install didnt configure everything fully.
Weird issue I now have is dialling out cancels and yet the phone I dialled rings about 10 seconds later (very weird).
When receiving a call - nothing happens on the BA, no ringing down phone calling out from then when the network drops the call the BA makes a small burp sound. So it knows it should be ringing but something is stopping it.
Tried upgrade to 1.15 Radio ROM - same. So now going to try downgrade to original WM2003SE Radio ROM version (1.06) and see how that goes unless someone has another bright idea?
same issue here
I am now experiencing the same issue, suspect its battery related though...hope someone can come up with something better than that. :lol:
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
You'll need to update those links for the new forum it seems.
Tried everything but although it all worked phone usage was inconsistant. Sometimes calling out works, sometimes just drops call with duration 00:00. Sometimes receives a call, other times goes straight to voice mail or un-obtainable tone even when signal fine and 2nd BA running WM2003SE works fine (same operator, Orange UK). Bluetooth also needed re-boot most of the time to be enabled. So reverted to WM2003SE for now .
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
hirsty said:
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
Click to expand...
Click to collapse
Thanks for that I tried 12 and then finally went back to standard WM2003SE radio version out of desperation. Nothing worked.
When I have the energy! I may try upgrading my other (newer) BA to see if that helps but first I need to backup my current ROMS as it works faultlessly under WM2003SE...why am I thinking of upgrading I ask myself
Alhumdulillah
everything is working fine for me
AKU 3.2 owns
CAM is fine
ricardo there must be some other problem i hope u didnt drop the phone too many times
looks more like a hardware problem to me
Hi
Phone is 100% OK with WM2003SE, so not a hardware issue...may try again soon, thanks for input.
Hey everyone ..
i was using my Blueangel normaly and so happy with it until i faced this problem before 2 days ..
I was texting my gf while i was out and kept on even though the battry gave me a warrny that its really low .. i ignored and kept SMS's her until it went off.
i went home charged my device but its not connecting to the network. it shows either "No Service" (where it shows X beside the signal tower) or "Searching" (where it shows ! beside the signal tower).
Please anyone knows how to turn it on im really in a bad situation here.
Note: just to let you know im using WM5 Hemi's rom and upgraded it today to Xplode's rom just hoping it would help.
Well when i tried another sim on my blueangel it worked and my sim card on another mobile it worked also. im really losing my brain
44 views no one have a slight idea..
anyways thanks alot everyone for visiting
Hi,
All I can suggest is to re-install radio rom! prob 1.15.
If not that then ensure flight mode is NOT active, and battery's fully charged
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
It seems wierd that another sim worked on your BA, must be a faulty/damaged sim.
I also note you've tried the non-working sim on another phone and that works! Wierd that too!
Hope that helps,
Sunny
Have you tried to manually select the network in the "Phone" settings screen? I've heard of similiar problems being fixed by that.
well after i asked here and there and got disappointed with I-Mate people.. they know nothing at all
an IT in my company told me the problem is with my sim card. its damaged cause of the change in the battry power (as he says) it damaged the frequency that my mobile use to read the sim so there for it would work on any mobile except mine.
so i would change the sim but it needs me ages to get free and do that.
THANKS ALOT TO EVERYONE ATLEAST READ MY THREAD OR TRIED TO HELP
YOU GUYS HERE ARE THE BEST
By the way
sunny: the Radio is already 1.15 from ages. but thanks alot for trying to help me.
Fraser: I tried to manualy select the network but it says there is no network which is funny cause there is 4 networks in my area.. actuly im working with the same operator so im inside the tower LOL. the signal streth is the best here.
Thanks alot mates
No problem!
Thats what we're here for!
Regards
Same problem
I once had the same problem. Now I'm no genius when it comes to these phones and it actually took me a whole week to get an idea of what the hell happened to my phone. Basically, these phones are Quad Band (GSM 850/900/1800/1900) and for some reason after I upgraded I lost my signal. I found a little application that let me reselect my band (its not built into windows for some reason) and that solved my problem. I just selected "Auto select" and the problem was solved after a soft reset.
Now, I can not remember what that application was but maybe that can give you an idea of what to search for.
No Service issue
sunnyd24 said:
Hi,
.......
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
...........
Hope that helps,
Sunny
Click to expand...
Click to collapse
Hi, is there more 'democratic' way to resolve this issue than reseting BA twice?
After installation of xplode's R4 for noobs an old version of R 1.06 was left on BA. Thinking that this was a reason for No Service of the phone I dumped latest R , but double f..reseting necessity still persists ...
Is that a normal thing to reset twice such an advanced device when you want even just to call smbdy? Thanks
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
xplode said:
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
Click to expand...
Click to collapse
Hi hi there! First of all please accept my deepest appreciation for such a great work you have done to make us - PPC ordinary users - little bit more happy Just one small note - is it possible to upgrade your downlodable R4 file with all necessary ROMs - Radio, etc., etc. With the intention that every Noob trying to upgrade his/her BA, should do it in a push of one button - not searching for separate latest ROMs and HowTo instructions? Thanks for your time!
P.s. Sorry it seems came out little bit off topic....
well it is possible but i have no time to do it. or you can try to copy the radio nbf file into the folder of the nk.nbf and run the upgrade utility
Any solution on this matter ? I am using Helmi MW6 ROM with radio 1.15.00 and i'm having the same problem.
I've searched the forum but found no solution yet.
JP
I recently flashed my phone to Dutty's dual touch 6.1 rom (from hyperdragon 3) and ever since i did phone calls have been a bit hit & miss. Ill ring someone and they wont be able to hear me, or ill ring someone and from the minute it ''connects'' i get a sort of staticy noise even after i hang up. Only way to get rid of it is to do a soft reset.
Am i right in thinking this is probably to do with the radio being miss matched? never had the problem before so just wanted to check it is before i started playing around with it.
if it is the radio, is it just a matter of hunting around for a new radio that goes with duttys ROM & flashing it in a similar way to flashing a new rom?
thanks guys
========================
MOD EDIT:
Please refrain from creating multiple posts about same topics. This is against xda forum rules. I have merged both of your threads together.
i also struggle to connect to any wifi networks. iv reflashed Dutty's latest 6.1 ROM (dual touch afaik) but it still has problems. I always thought dutty's Rom came with their own radio?
thanks guys
Wifi - unable to connect?
Last few days iv struggled to conect to any wifi network. When i select the network and try and connect the phone just sits there ''connecting'' until it tells me its unavaliable. iv tried on 2 different networks, both which have worked in the past.
It started when i flashed to Hyperdragon III ROM, then reflashing two of Dutty's ROM (latest 6.1 and dual touch) still hasnt sorted the problem.
Iv tried searching and couldnt find anything, and im getting a tad desperate tbh. I thought it could have been a problem with the radio, but both of duttys ROM come with their own radios and they have worked for me in the past.
This is a clean install, on Duttys latest 6.1 ROM and im lost for ideas!
Can anyone offer any advice? cheers guys
Hi guys, I would love if anyone could help or has had this issue before, I have an htc tilt build of the kaiser, and ever since I flashed it into anything custom, tried a bunch of different radio's and hard spl's and rom versions. I even reverted everything back to the stock settings as best I could. I couldn't find the original wm 6.0 stuff it had so I flashed everything (including the hardspl back to normal and the wm 6.1 update for the kaiser. Either I may be doing something wrong... or I bricked my phone, but since its operating normally aside from the signal, I don't think I bricked it.
Heres essentially what it does, I turn it on, it works for X amount of time, usually a few mins then won't do anything, calls or data, even if it has signal, which seems to get weaker or no signal at all after a few minuites.
Now an odd thing is, if I tether the internet to my laptop with internet sharing, alot of the time the connection runs stable for several hours if I tether it within a few mins of a bootup.
I'm sorry it was so wordy, I just figured any information could help out, I'd really appreciate it, and not having to restart my phone alot the time would be great
Currently I'm running stylus black's latest full build (5.0?) on hard spl 3.29 and the radio 1.70.19.09. the stuff recommended on the thread.
Try a different Radio the recommended just means tested by chef and works doesn't mean it will work for all people since so many variables involved in choosing radio.
Hi, was your issue resolved using a different radio.. My friend has signal problem as well. It only happens when the keyboard is open.. is this a hardware realated problem?
Hi everyone, im def a noob and have summarized a few questions which i cant find answers after extensive research for past 2 weeks, so any help will be appriciated!!!
1- The new "rom upgrade" released for at&t tilt 2 comes with the radio ending in .95 but i get horrible reception everywhere i go. I somehow stumbled upon htc europe radio ending in .17 and i get great reception but the problem is the phone itself becomes unusable due to the change in the htc sense. My question is.........
A-is there a way to put the radio i want but run the the new os?
B-is anyone else from NY area using a radio which gives great reception?
C-which is the best radio to use in my area?
2- I downloaded whole bunch of cooked rom's for the tilt 2(e.g., cookie gtx themed) then unpacked the .rar file and then i double click on the file and.....nothing? absolutely nothing happens, firewall and everything else is off, but nothing starts on the screen and yes my phone is connected via active sync and i did the hardspl thing, can anyone shed some light on this?
3- I have probably tried 3 different apps to disable "sms sent" notification, butt the damn thing doesnt go away, what do i do? and i read sumthing bout registry change but i dont even know where to start!
4- this is more of a request, if you guys can recommend me a fast & slick ROM with the best possible radio for ny area and looks cool as s*** then that would be appriciated.
Thanks guys and sorry for being the typical noob!!
Hmmmmm. Wrong section, this is G1 section