Time keep rolling back for 1 hour - XPERIA X1 Q&A, Help & Troubleshooting

I searched the forum, but I don't see any answer to my question.
I am on Fido (i.e. roaming on Rogers)
My X1 keep synchronizing with the tower's clock everyday....... and since rogers doesn't change their tower time during summer for daylight saving.... i have to adjust my clock 1 hour faster everyday (as it will delay one hour again tomorrow)..... which is really annoying as i use my phone to wake me up in the morning... and even worse..... it changes all my schedules by 1 hour earlier...
My question is...... is there any way i can fix this 1 hour delay problem? or is there anyway i can disable the time sync function?
Thanks in advance.

I'm with Rogers, and I'm not getting this time bug you are talking about. There is a setting to disable Automatic time change. Settings -> Phone -> Timezone.
I've had a related time bug on my XPERIA where my text messages were showing up as the wrong time received. Had to add a value to the registry to fix it.

Related

Daylight Savings Time BUG FINALLY Identified - Am I the ONLY one with this problem?

Shortly after DST went off, I realized that I had a problem, because all recurring and all-day appts were one hour off (making the all-day appts span 2 days), during March-October 2008, when DST will go back into effect.
After finding no answers anywhere, I discovered that UNCHECKING the TIMEZONE setting ("automatic change time zone and clock") under PHONE options, fixed the problem.
However, I LIKE the idea that my clock will adjust automatically based on the time zone I am in. When I was with Verizon, I hated that the phone wouldn't change automatically.
I can't be the ONLY one with this issue, can I?
Please suggest how to have my cake and eat it, too!
Is EVERYONE keeping the TIME ZONE option unchecked? Or does no one have any recurring/all day appts already set for April of '08? Would really appreciate some help with this.
P.S. Even though we have wm6 on the phone, I did the DST fix from Microsoft, as well as the "extra steps" (which involves going to the clock setting, change the time zone, exit out, go back in and change to correct time zone and exit out), which does take care of the issue...for a little while. I can have the TIME ZONE option checked and it works fine...but only for a little while. Always after a soft re-set, it loses the time zone reading and sometimes it just loses it after the phone sits idle for a while.
I was under the impression that we weren't supposed to apply the DST fix at all on WM6 for the Tilt/Kaiser. I applied it way back and had all sorts of issues.
I removed it and it's been fine ever since the DST switch.
After applying the "fix" and it not changing anything, I did a hard reset and left it alone.
Do you have the Time Zone option checked in Phone settings to automatically set the time zone and clock?
If you have the Time Zone option checked, would you do an experiment?
Make a weekly recurring timed event that starts BEFORE March 1 and ends AFTER November 15, 2008. Then, do a soft reset. Then, go to your calendar and see if the events after the 2nd Sunday in March and before the 1st Sunday in November are an hour off? That's what's happening with my calendar.
And post your results here? Thanks.
I found that the auto time zone setting in Phone settings causes more problems, Activesync auto launches constantly with this setting enabled as well as occasional time jumps (eg. from PST to Mountain Time for no reason).
With the time zone setting un-checked everything is very stable BUT my stock Kaiser did not change DST correctly. I have since applied the DST patch and will wait for the next time change to see what happens.

Time delay

My diamond time delays 1~2 minutes one day, does anybody have the same problem?
Same here. Have you found out what is wrong yet???
Same here, could be because I've unchecked the 'Automatic change time zone and clock' option on the Time Zones tab in the Phone Settings. Even so, my Diamond's internal clock seems to be lagging..
....no, I have checked this, but this is not the cause.....quite annoying..as I need to reset the time daily....:-(
Can anyone help???
I have the same issue as well. Time falls behind about 2/3 mins everyday
No, I have the Diamond for over 2 weeks now and the clock is accurate, same as my computer which is always sync with internet time. I haven't flashed any cooked ROM yet. Still on the Telstra stock ROM at present which I am quite happy, despite a bit bloated.
The problem have been resloved, we should select the 'Automatic change time zone and clock' option on the Time Zones tab in the Phone Settings.
firmware said:
The problem have been resloved, we should select the 'Automatic change time zone and clock' option on the Time Zones tab in the Phone Settings.
Click to expand...
Click to collapse
The 'Automatic change time zone and clock' does not resolve the problem. This has been discussed in a number of threads but so far the problem has not been rectified.
Isnt the clock synchronized with the PC automatically?
So.. if you just sync ur device from time to time, everything works out fine?
I'm again having this same problem. I'm using ROM 1.93.831.1 WWE with Radio 1.00.25.05.
I hope somebody can give some solution to this issue. It would very much appreciated. It's really quite annoying to adjust the time daily.

Phone keeps changing time

Wow, just let me start off by saying that sometimes I just feel like grabbing this phone and smashing it against a wall
Pheww, now that this is off my chest, here is my question :
My phone is set to time zone EST. Every other time, when it feels like it, it decides to switch the time to GMT London, Dublin - a good 4 hour difference.
I use my phone as an alarm clock and as some of you can imagine that can keep me in bed and miss work - not good. And no I don't want a real alarm clock
I'm currently using swtos' ROM and I had 1.93 also. Still the same problem.
I tried doing a search and came up with wrong timings only for received text message, which is also an issue I had but fixed.
Any ideas?
I am not sure what you experienced are same as mine or not. For my problem, every time i synchronise my devise with my laptop using activesync, it will automatically sync to my laptop time. My laptop time is 10 minutes faster. I have to manually change it back to the actual time after remove charging from my laptop.
I know when I first got my phone the time kept changing to Sydney time (daylight savings) where I'm in Brisbane.
This fixed it for me, don't know if this is the same issue though..
Settings > Phone > Time Zones > Untick "Automatic change time zones and clock"
upm15 said:
I am not sure what you experienced are same as mine or not. For my problem, every time i synchronise my devise with my laptop using activesync, it will automatically sync to my laptop time. My laptop time is 10 minutes faster. I have to manually change it back to the actual time after remove charging from my laptop.
Click to expand...
Click to collapse
No, this is not related to active sync, it just seem to switch out to a different time zone. I just switched out ROMS and issue is still there.
IanKay said:
I know when I first got my phone the time kept changing to Sydney time (daylight savings) where I'm in Brisbane.
This fixed it for me, don't know if this is the same issue though..
Settings > Phone > Time Zones > Untick "Automatic change time zones and clock"
Click to expand...
Click to collapse
I really hope this is the issue. Because it just did it again
I just switched daylight saving off - will report in a day or two. Thanks for the tio.
Well after switching off automatic time zone, the clock just reset itself back to London, Dublin time.
It seems to be switching only after 6PM - Any other ideas?
I have the same problem. I am on GMT+2 (Athens, Istanbul), and I choose this time zone. Pressing OK, and then again entering Time Zone Settings, it is changed to GMT+2 Windhoek. This is not the main problem (probably my provider did not set their settings, and sends me new settings).
Sometime (once in a 2 week period), time changes but not in full hour increment/decrement, but hours and minutes. This very morning, the alarm started at 7:15 (as it should). Few minutes later, I got up, switched on the phone and saw the right time: 7:23, but a second later it changed to 23:52 previous day. The time zone remained the same GMT+2 Windhoek.
This IS pretty annoying. Luckily, my wife has some old Nokia which works as supposed.
So I went into my IGO8 settings and I found that the time in there was set to London, Dublin time.
Not sure if this is the issue but I have now adjusted it to ET. I will report back in a while to give an update.
I used to have the same problem with my Hermes. I found that if I set the home and visiting time zones to the same time zone, it stopped changing.
^^
I really hope this the solution as my IGO8 settings didn't do the trick.

Clock always changing time randomly

Hey All, I've have recently flashed Touch-it V4 to my Xperia, but now the clock keeps on randomly changing the time on me. Usually puts it out by an hour, or sometimes 15mins. I've tried putting day light savings time on, selecting my city etc but still randomly changes the time on me.
Also noticed if I set my country, it will randomly change itself as well. Eg. set it to New Zealand, then go back and check and it will be on Fiji??
Anyone know how to fix this?
Is super annoying as messes up my alarms & appointments, nearly missed my flight the other day.
Cheers
Same problem here. Seems to be a TF3D bug. It doesn't seem to recognize daylight savings time. It keeps switching me to the "Bogota, Lima" timezone which is 1 hour behind my real timezone of Eastern Standard (US).
I'll have to use a different panel for now to keep my schedule/alarm on time, probably the SPB Mobile Shell.
Alternatively I could just use "Bogota, Lima" time and set it 1 hour ahead, but then every time I sync the phone, the time will be reset to 1 hour behind and throw my calendars off.
Yea is a right pain, fiddled round with it so much but still can't get it to work
uGo check your iGo?
I had that problem and found it was iGo set to an incorrect time zone, so each time I started the program it changed the time.
- Jeff
sammiebreezes said:
Hey All, I've have recently flashed Touch-it V4 to my Xperia, but now the clock keeps on randomly changing the time on me. Usually puts it out by an hour, or sometimes 15mins. I've tried putting day light savings time on, selecting my city etc but still randomly changes the time on me.
Also noticed if I set my country, it will randomly change itself as well. Eg. set it to New Zealand, then go back and check and it will be on Fiji??
Anyone know how to fix this?
Is super annoying as messes up my alarms & appointments, nearly missed my flight the other day.
Cheers
Click to expand...
Click to collapse
I had this problem, it was so anoying with syncing
go to the "settings">select "phone">select the "time zone" tab, and untick automaticly change timezone or whatever.
I have a htc diamond, but should be similar/same as they both WM
dirran said:
I had this problem, it was so anoying with syncing
go to the "settings">select "phone">select the "time zone" tab, and untick automaticly change timezone or whatever.
I have a htc diamond, but should be similar/same as they both WM
Click to expand...
Click to collapse
Thanks but mine was alredy unticked?
jbcross said:
I had that problem and found it was iGo set to an incorrect time zone, so each time I started the program it changed the time.
- Jeff
Click to expand...
Click to collapse
Where do i find iGo ? Never heard of that
sammiebreezes said:
Thanks but mine was alredy unticked?
Click to expand...
Click to collapse
try ticking the check mark...it worked for mee and then soft reset
I'm fairly certain it's a TF3D bug and whether or not that option is ticked won't make a difference. If you live in a time zone where they observe daylight savings, touching the time on the TF3D home tab will change your time zone to one that's 1 hour behind. If you go back into your clock settings and set it to the correct time zone, it'll be ok until the next time you press the clock in TF3D.
So the short term solution is to never press the time =)
SMS timestamp too
I'm using Touch-It 4.0 II.
I'm also experiencing my time shifting by an hour and that my system clock and alarm settings keeps resetting itself back to Bogota, Lima.
Also, my incoming text messages' timestamp is now always 5 hrs in the past.
Is the clock setting from Touchflo 3D supposed to be aligned with the system clock and alarm settings?
Got the same problem before. Able to fix it by making sure the time settings on my computer where i actively sync my phone are the same. That is time, date, time zone, and if DST settings are checked or not.
dgee said:
I'm using Touch-It 4.0 II.
I'm also experiencing my time shifting by an hour and that my system clock and alarm settings keeps resetting itself back to Bogota, Lima.
Also, my incoming text messages' timestamp is now always 5 hrs in the past.
Is the clock setting from Touchflo 3D supposed to be aligned with the system clock and alarm settings?
Click to expand...
Click to collapse
Just noticed I get hte msn time stamp problem as well, really random though
ERWIN CENIZA said:
Got the same problem before. Able to fix it by making sure the time settings on my computer where i actively sync my phone are the same. That is time, date, time zone, and if DST settings are checked or not.
Click to expand...
Click to collapse
Is def a problem with touchflow, flashed generic rom back & now phone is working fine again
+1 on this...
Time zone
I read somewhere that the reason text messages were coming in 5 hrs off was that the Rogers tower was doing its own 5 hr timezone offset on the messages so I ended up getting messages with a timestamp of 5 hrs ago. But I never experienced this problem on my Vox so I don't know. I haven't tried to reflash my ROM to a generic and receive text messages either.
Did anyone else notice this SMS timestamp problem only after flashing to a touchflo 3d rom?
Anyone know if this is fixed in touchflow ver 5? Never had the problem with v3
try not to run any navigation apps..i found out my garmin always changing my time every timr i start the apps..
I ad the same problem
In settings of my navigation (Polish AutoMapa) i can turn off synchronization of my time with gps. (sry 4 my english)

Clock Issue with Energy rom

The issue im speaking of is the actual home screen clock. Every morning I have to re set it because it ends up becoming off by a few hours. I searched this forum and couldnt find anything. I had also posted the question in the Energy rom thread, but it kept getting swamped out by random question. Im running a tilt 2 FYI.
Any help appreciated, thanx
uncleswoop said:
The issue im speaking of is the actual home screen clock. Every morning I have to re set it because it ends up becoming off by a few hours. I searched this forum and couldnt find anything. I had also posted the question in the Energy rom thread, but it kept getting swamped out by random question. Im running a tilt 2 FYI.
Any help appreciated, thanx
Click to expand...
Click to collapse
Did you set your time zone? Did you turn on or off internet time sync? Did you uncheck get time from network under phone settings? Any of these could be the cause of your problems...
Im feeling really dumb this morning...My alarm didnt go off this morning because of this same problem. And I cant for the life of me figure out hwo to make sure the clock is auto updating to the network.
Im running Energy Cookie Reference. I have seen the settings before...but cant locate them today.
Time synchronization?
Hi.
Do you have the automatic time synchronization on? Try to disable it.
Settings -> Personal -> Phone ->
or
Sense settings tab -> data services -> internet time sync ->
Hey thanks for the response...my settings are different though. I found the setting in BSB Tweaks and turned it off...only time will tell if it helps though...we will see if my phone fails to wake me up again tomorrow...
Left Energy yet again because of this issue...I dont know a whole lot about the technicalities but it seemed to me that the phone is 'going to sleep' and actually losing track of the time thus keeping my alarm from sounding in the mornings.
When I hit the power button to wake the screen up in the mornings it would be displaying a time that was hours behind and seemingly random (what lead me to believe the phone was in a deeper sleep than normal). Possibly a really stupid theory...but like I said I dont know a whole lot. I just know it was way unacceptable in my case.
I will still monitor his threads like always and try the latest and greatest ROMS.
Clock Issue with Energy romArrow
I think the problem you are having is the windows alarm bug. I used to get this all the time until i started using g-alarm. it fixes the issue when you first install it. (note that its a paid app.) but here is the description and the registry edit that you need to change to fix the problem.
can't post the link soo you will need to copy and paste the url below if you want to view the webpage.
ageye.de/index.php?s=galarm/support/manual/limitations
Windows alarm bug
Windows Mobile has on some devices a strange behaviour: Although an alarm is successfully added to the WM notification queue (it's like a scheduler) it doesn't go off.
Searching the web gave me following information:
At midnight WM rebuilds the notification queue, therefore it wakes up for about 15 seconds. If the notification queue is too big or the device too slow WM goes to sleep again before it could finish building the queue for the next day.
If you force WM too stay awake for a longer time, it should successfully build the queue on at least more devices.
If you start G-Alarm and it complains about the Windows alarm bug, you've got the default WM settings (15 seconds WakeUpTime). If you press "Yes" G-Alarm changes it to 120 seconds which should be enough.
Here are the registry values G-Alarm changes:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts\ACResumingSuspendTimeout
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts\BattResumingSuspendTimeout
Click to expand...
Click to collapse

Categories

Resources