Database Develop

Tera Term for Windows XP?

Do any of you have a program that I could use to sync my phone to my Computer via usb? I've tried several versions of Tera Term with no success. I reached the point where I was ready to pull all of my hair out and then I remembered... I don't have anyway. Oh well. Please help I really want to upgrade my rom but I want to back up the old first. Thanks, Vern.

i think i don't understand what you're trying to do!?
Don't you use ActiveSync for Syncing with your PC?
And wtf is Tera Term???

This is what I'm trying to do:
Originally Posted by kdenninger
To back up the firmware on the MDA to an SD card (a VERY GOOD IDEA if you intend to fool around with new firmware!)
1. Get a 128MB SD card. They're cheap - under $20.
2. Insert said card.
3. Go to http://forum.xda-developers.com/viewtopic.php?t=37386 and download the aWizard utility. CID-unlock your phone. (You only need to do this ONCE, even if reflash in the future.)
4. Get a terminal program that can speak over the USB port. There is a patched version of Terraterm out there, along with a few others. You need a way to connect to the device over the USB port as an ascii terminal.
5. Turn off the phone.
6. Holding the CAMERA key, press the power button for 2-3 seconds. Continue holding the CAMERA key until it comes up in the tri-color screen.
7. Connect the USB cable. Wait until ActiveSync tries to start. CTRL-ALT-DEL Windows and kill the process wcescomm.exe (ActiveSync's communication driver)
8. Now start your terminal program and point it at the USB port. Hit RETURN and you should get a command prompt. You are now talking to the phone's boot loader in terminal mode.
9. Type "r2sd all" and hit RETURN.
10. If you get a security level violation, you DID NOT CID-unlock the device. Go back to step #1.
11. The ROM image (all of it) will be written to the SD card. Several messages will be displayed while this is in progress. Note that this is NOT - I repeat - NOT - a filesystem-formatted dump - it is a RAW image of the ROM with some checksum information included. Anything on the SD card will be destroyed - don't do this with a card that has data on it you care about!
12. You can stick this card somewhere to be used for restoring. If you want to save the image off the card to your computer, stick the SD card in your computer and then dump 128MB of the card starting at the front (the actual dump is about 80mb but will always be less than 128MB, so that's "safe".) You will need a tool like "psdread" or any other tool that can do byte-level I/O to the SD card in your PC's reader for this.
To restore a SD-card image dump to the Wizard:
1. Write the image to the SD card. Again, this is NOT a filesystem - its a RAW image! Unless you saved the image to the card from the Wizard initially you will need a tool that can do a raw write to the SD card in your computer.
2. With the Wizard OFF, insert the card into the SD slot.
3. Hold BOTH the CAMERA and VOICE keys and press the power button for 3 seconds. Release POWER.
4. Look CAREFULLY at the Wizard screen. The backlight WILL NOT BE ON! It will tell you to press the VOICE button if you wish to restore the SD card image. This message only appears for a few seconds and the backlight is OFF! If you wait too long you will end up at the tri-color bootloader screen. Press the VOICE button (if you still have it down, let up on it then press again.)
5. The restore will run. Note that the backlight IS NOT ON during this process! You may need a flashlight (or very bright ambient light) to be able to read the progress meter.
6. When the process is complete it will tell you to press "any key". Do so and you're back in the tri-color bootloader screen.
7. Turn off the Wizard with the power button. When you turn it back on, it will hard reset just as if it was brand new off the firmware you just restored.
Note that this is the ONLY way to recover from a bricked phone if you try to load the wrong firmware file using one of the "forcible" methods (e.g. aWizard) on a non-CID-unlocked phone, and have bypassed the normal protection methods as ActiveSync cannot get back in there under these circumstances.
I strongly recommend that if you're going to futz with firmware, that you get yourself a 128MB card, make one of these dumps, and TEST the restore before you play around. This will recover from almost any botch - the only exception is loading a firmware file via some means (e.g. "aWizard") that the phone cannot execute at all.
Note that I do not know if this will get around the "boot loader version is too high" problem - I'm not willing to try it until I have an official T-Mobile update with a newer boot loader.
This same method for both dump and restore works on the SDA as well.
13. Overclocking the MDA (do so at your own risk!)
Quote:
Originally Posted by Scaw
Use Smartskey, read about it in this article on my HTC Wizard Blog. No specific ROM required, overclocking integrated. You need to download OMAP Clock seperately, it is available from the same article. A small tutorial in PDF format is included in the .zip with Smartskey. Don't forget to remove the ";" (without the quotes) at the beginning of the overclock settings in the configuration file!
How fast you can clock it depends on your device, it's just a matter of trial and error. 240 seems to be safe for the majority of HTC Wizard owners. No need for extra tools to wake overclocking up after a soft reset or standby. I haven't noticed severy battery drain, I can easily use my device a whole day and come home with the batterie well over 50% charged.
It's just a great little program. The integrated overclocking comes as a bonus to the tweak that the program was actualy made for, remapping buttons so you can open the start menu without using your stylus and close programs without using the stylus.
Have a look around on the HTC Wizard Blog, there is lots of other stuff that you may find useful.
And Number 4 is WTF Tera Term is. Thanks.

If you stuck on boot or color screen !

Guys,
This is my experience with O2, which stuck on boot after udated to new IVAN's ROM.
First of all I'd like to thank Ivan for his great job.
Now, what I did:
Downgraded to se2003
Unhide, Unlocked EXTROM
Repartition EXTROM to 8MB
Upgraded to new WM5 ROM
Reboot -> STUCK !
I found the solution which worked for me and may be will help you too.
More, after my second attempt to upgrade ROM, my Laptop rebooted itself a 47% ! I did panic- my device was gone dead!
even Bootloader mode was unavailable.
OK, I disconnected PDA from cradle, removed battery and left it for 10 minutes. Then I put battery back, and was able to put it into bootloader mode.
Then, I run mtty utility and typed in "set 14 0" I'm not sure why and how, but it allowed me to to go to bootloader mode.
-I set SE2003 OS
-I repartition EXTROM to 16MB
-Updated again to new Ivan's WM5.
Voila ! it's OK now. I'm installing all needed CAB's and now have clean very fast and working OK WM5 OS o my O2 XDAs PDA.
( although have not tryed yet BT and WiFi)
I'm afraid the problem was due to setting number 8000 KB in partiotion tool set it actually a bit less something about 79xx KB.
May be EXTROM for Ivan's ROM did not like it and failed to boot. But this is just a speculations, I'm not sure. I should perhaps set size o EXTROM to say 9000KB and try again, but simply did not have a time to do test.
Nevetheless, I'm happy now.

can u provide me step by step (noob guide) to downgrade back to wm2003se ... the one i downloaded from the official site doesn't work ... it will say error and i still stuck with wm5 ... im a noob ... please really help, thanks

ok at last i found it ... extract the installation files provided by o2 ... put the rom file into the downgrade folder provide by the modified rom pack ... now i try go back to wm5 ... wish me luck

i tried go back to win2003se but when i use the unlocker tools it failed ... so i guess i will nvr get to see the ext rom ... anyway as long as the phone can be use i will leave it as it is now

Yes, I know, it gives you an error message (something about wrong parameters) on unlock. But, under that you can see another message box with unlock OK message. Quite weird.
Steps I took to downgrade are exactelly as instructions in downgrade folder.
And one more thing I forgot ! After unhiding I did soft-reset, then unlocked and then Formatted ETROM folder before upgrading to WM5.

COM said:
And one more thing I forgot ! After unhiding I did soft-reset, then unlocked and then Formatted ETROM folder before upgrading to WM5.
Click to expand...
Click to collapse
maybe that's why u able to see the extrom after upgraded to wm5 ... btw i install the cabs one by one and now my wm5 worked ... guess imnot going to touch it anymore, but the performance is actually quite slow ... do you actually install all the cabs into the device, storage card, or extrom partition (i dont have this) ... to maximise the performance?

what WM5 are you using?

if you ask me, i'm using Ivan's ROM + radio 15.0 with about 10 diff. cabs installed.
performance is not such impressive, but everything is working and I do not have soft I won't use.
clean and quite reliable, but speed is slow.

COM -
I also got stuck with a white screen after flashing ArtZ Rom and doing a hard reset.
Just a white screen and nothing happens.
Flashed other Roms - back to Tuma - same thing - white screen after hard rebooting.
Stuck and confused now.
Any ideas for a solution?
Thnx

OK - I am back.
Panic mode over - whew!
Flashed back to WM2003 from i-mate site - it worked.
Then flashed to latest ArtZ Rom.
Don't really know what happened or why. I've upgraded to nearly every WM5 Rom with no problems. suspecting the partitioning of extrom?

hasanj4 said:
OK - I am back.
Panic mode over - whew!
Flashed back to WM2003 from i-mate site - it worked.
Then flashed to latest ArtZ Rom.
Don't really know what happened or why. I've upgraded to nearly every WM5 Rom with no problems. suspecting the partitioning of extrom?
Click to expand...
Click to collapse
I am still in the same problems. I can't downgrade to
Windows SE2003, becouse of error 113: "Extended ROM
Update Error". Stucked in white screen and, after reset
at 3 stripe-colored-screen.
Does anybody know the solution for this issue ?
Thank you in advance.

try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Sam

imatrix said:
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Sam
Click to expand...
Click to collapse
---
imatrix, thank you very much, your hint solved
this issue with stucked boot screen and Extended
ROM Error when downgrading to SE2003.
I already tried with mtty and "SET 14 0", but
don't know for the other commands / task 28, task 0.
The main hint is "task 28" which made DOC_format_HW+
DOCInfoTableinitHW+ other formatting.
Again, thank you very much and all the best to you.
Greetings from Croatia, the small land for a great vaccation ;-)

@MDA3_CRO
Just saw your post.
Could not get mtty to work.
Will keep your instruction for future use (hope not).
Glad your .paper weight' is useful now

Please help I have tried all the above and none of it has worked, I'm still stuck in bootloader screen.

i dont understand what you mean by
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
when i run my mtty it just opens "Open Port Settings" then it goes to a window that shows i can type in it but it only allows me to copy paste words into it. Can anyone help me please?! i just want to be able to use my BA again

BlueAngel BootLoader

Hello Everyone,
My BA is stuck at the Splash Screen, I suspect that the Bootloader is corrupt. Does anyone know how to flash it?

try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix

imatrix's suggestion.
@imatrix
Followed the steps before, and followed them again.. I'm still stuck.
Something interesting happened though:
There are two horizontal stripes across the splashscreen now.
I already tried to flash the OS, It doesn't work with the standard imate flash executable (It used to work before) and now I'm getting a 'MODEL ID ERROR' when I try to flash it using the BAupgrade... executable.
I tried with the MAupgradenoid tool, it flashes but I still get stuck on the splashscreen...
Thanks,
Wadih

BlueAngel Bootloader
Anyone has a way to either dump a bootloader file for the BA (Providing the file of course) or alternatively directives to copy it from another device (From the same make, i.e. Imate PDA2K) ?
Many thanks,
Wadih.

try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix

@imatrix
imatrix said:
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
Click to expand...
Click to collapse
I did, but as I specifed in me earlier post, eventhough the MAUpgradenoID flashes the files, I still get stuck at the splashscreen.
Interesting point: After flashing witht the MAUpgradenoID, I try reflashing back with the BAupgradeid.. I get the Model Error ID error back..
Something in the BA is wrong, and I believe it may be in the Bootloader. So, is there a way to replace the bootloader itself?
EDIT: By the way, I can't seem to be able to place a WM5 rom instead of the WM2003, although the flashing procedure starts, it quickly ends (i.e. without the percentage bar appearing) and says that the flashing worked successfully... But nothing gets actually flashed.
Many thanks for the help imatrix.
Regards,
Wadih.

hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix

@imatrix
imatrix said:
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
Click to expand...
Click to collapse
Thanks for the link, but how do I copy/get a clean boot bin file? (Which app, syntax, etc...)
Cheers,
Wadih.

BlueAngel froze on isalling wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it

BlueAngel froze on installing wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it

100/100 work
imatrix said:
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
Click to expand...
Click to collapse
thaks br very good

Hi, I have the problem, that windows does not recognize the Blue Angel any more, so no "WCEUSBSH001" available. Any help??
Thx

Problem with update WM6 - Treo 750

Good morning friends...
I'm from Brazil - Sao Paulo.
I did the download of the updatingfor WM6 straightly of the site of the Palm Australia (version for operator Telstra 1.15 ROW), for a treo 750 version 1.15 ROW of the operator Claro. It was doing the updating and for my unhappiness, it finished the energy. When it returned, the appliance does not go out from that fabric of bootload. I looked for informations in several forums, and found the information of which there was an executable one to continue the updating in the directorate TEMP. I continued with the updating, and came ending it. However, now the appliance does not go out from the fabric of presentation (it arranges with it soon of the Palm). I tried to find some informations in respect, and even I finished appealing, and even I formatted the Palm (Power Reset). I tried to install again, I continue them to myself with the same problem. I checked that there are some updates in which there is possibility to effectuate through the SD itself, which the ActiveSync does not recognize any more the appliance. It recognizes the Windows like ' HTC USB SYNC '.
If possivel, it would like some help, if vcs know any alternative form. Opposite case, I will have to get a beating up to the technical back-up, and it does not enter in the guarantee.
Excuse if there are some mistakes, but it does time that I do not talk in English
From now I thank.

Phew, I managed to decide. I followed these steps what I found in the Internet and it gave right:
1. Using winrar descompacte Updater_anything_anything.exe
2. Find there the archive CHEEIMG_FW.nbh (it has +- 83MB).
3. Format his card for FAT32 (using Windows and reader of card for ex). There is certified what is FAT32, not FAT (16). (obs I formatted mine using the proprio palm with the resco explorer himself).
4. Copy CHEEIMG_FW.nbh for the formatted card.
5. Re-nominate CHEEIMG_FW.nbh for CHEEIMG.nbh
6. put his card in the Treo. Connect the porter in the Treo.
7. Pressing buttons PPT/Media (below the volume) hold tight reset with the stylus.
8. There must appear the fabric of the bootloader (it reddens green blue).
9. If vc did the previous steps correctly he must ask if you want flashar the ROM.
10. Press the red button (power) to confirm.
11. Assist the bar of progress while the Treo is flashado (15 minutes??)
12. After the upgrade, do a hard-reset (reset holding the button power, then arrow 'up' to confirm).
Since it was not letting to pass the archive for SD through the Palm, and tbem have not a card reader, I used a Nokia 6265 that had here, and he gives the option of drive was recognized like pen. I formatted the SD and followed these steps.
Phew, I thought that my Treo had died, thanks guys...

Help with wm5 to wm6 upgrade!

I'm dizzy reading all the threads, information overload, so thought I'd just post the question! This is all a bit scary and I'm a complete newbie so take it easy on me... and feel free to dumb everything down as if I were a child.
I live in Australia and have a Treo 750 with Software Version TREO750-1.15-ROW. It seems to be unlocked but still has the Telstra splash screen, although I use it with Vodafone. I want to upgrade to WM6, and from what I can tell I should upgrade using Treo750_2_27_ROW_EN_DesktopUpdater.zip (which I now have). Is this right? Should I skip straight to the WM6.1 upgrade? Are these official/safe?
I am running 32-bit Vista with SP1 on my laptop.
I found instructions on Palm's site here:
http://www.palm.com/au/support/treo750/downloads/wm6update.html
Are those the instructions I should follow? Is that all I need to do? I keep seeing references to the "Bootloader Method" or the "SD Card Method" or the "Cheetah Method". What are all these alternative methods? Which are the advantages of each? I've seen various different instructions, some involving renaming some .nbh file, etc. What is the definitive method?
I saw the sticky thread for the "Cheetah Hard-SPL and SIM Unlocker"... what is that utility for? Are the instructions for it in the download itself? (I didn't see it in the thread) What are "cooked" ROMs and why should I be interested? Where can I find them?
Sorry for the newbieness... thanks so much to all who respond!

upgrade to WM6
If you want to upgrade to the official palm WM6 rom - then you use Treo750_2_27_ROW_EN_DesktopUpdater.zip and it is very simple - just connect the PPC to your computer . (as I know better to do it with a computer with WINXP and Activesync) , then run the program in the file Treo750_2_27_ROW_EN_DesktopUpdater.zip, and that's it.
If you want to upgrade to other roms like 6.1 normal or lite that you can find in this forum - then you need the other methods (there are two as I know - bootloader method or Kaizer..somthing method). Well, I wrote a guide how to upgrade to WM 6.1 lite using the bootloader method , I just sum up from this forum :
1. Download the rom file and the radio file:
Rom file from here : http://rapidshare.com/files/89355384/Treo750_WM6.1_WWE_Lite.rar
The radio file from here :
http://rapidshare.com/files/89336971/Treo750Radio1.54.07.00.rar
2. Download the Hard-SPL from here :
ftp://xda:[email protected]/Cheetah/Unlocker/CheetahUnlocker.rar
3. Format mini SD card 32 FAT , using a card reader or other way.
4. Do a HARD-SPL with the CheetahUnlocker file ( step 2) . Connect the Treo with your computer using Active sync(for WINXP) and run the file. Use those steps:
- Click the Step 1.... wait the progress bar reach 100%
- Now watch the Screen on your PDA it will launch 2 times verification...
- just click YES ...wait.. and YES again.
- after finisih... wait until the activesync go green again.....
- Now click the Step 2... wait the progress bar reach 100%
- Watch the screen again... same thing.. it will launch 2 times verification.
- click YES ...wait.. and YES again.
- After finish it your PC screen will shows some popup. ignore the reading bla bla bla... about ask u to click ok.
- Just wait untill your activesync go green again.
- Now click that bloody Popup OK button.
- The unlocker app will shows up again..
- Then you will see errors saying.. continue, cancel...etc... bla bla... just click continue.. error message.. iqnore it and then just finish it.
- Now your Cheetah should be on HARD SPL mode.
5. Install the ROM :
a. Using Winrar get the file from step 1. It's name should be : CHEEIMG.nbh
b. Copy the file to the root of the mini SD .
c. Do BOOTLOADER:
1. turn phone on
2. press the MEDIA button AND at the same time with the stylus the RESET PIN
the MEDIA button is the 3rd button on the left side of the phone, under the volume button
the RESET PIN is under the MINI SD card cover
3. keep holding the MEDIA button (left side of phone) until you get the 3 color screen
Wait until it finishes. Then Hard reset the device when prompted. To hard-reset, hold the End key while pressing the pin reset button. Answer “yes” to “Erase all data” prompt.
6. Flash the radio at the same way – just copy the radio file to the mini Sd – it should be the same name. (CHEEIMG.nbh ) .
7. Download the Palm SMS file from hereYou need it only for the lite version)
http://rapidshare.com/files/99335294/threadedsms.rar
or
http://www.megaupload.com/?d=H63TXUP4
And install it as regular software (Copy to the mini SD and run it from the Treo.)
And that it all !!
Do not restore from your backup (You can restore only your data files).
Good luck !!

Update Successful
Thanks mate, I'm not brave enough to try the wm6.1 upgrade yet, but I did manage to upgrade to wm6 with the Updater, even though my device was "not supported". I ended up using the method where you edit the payloads.xml file before clicking 'start' so that it accepts your current device version, etc. I'm all good now.

libal said:
If you want to upgrade to the official palm WM6 rom - then you use Treo750_2_27_ROW_EN_DesktopUpdater.zip and it is very simple - just connect the PPC to your computer . (as I know better to do it with a computer with WINXP and Activesync) , then run the program in the file Treo750_2_27_ROW_EN_DesktopUpdater.zip, and that's it.
If you want to upgrade to other roms like 6.1 normal or lite that you can find in this forum - then you need the other methods (there are two as I know - bootloader method or Kaizer..somthing method). Well, I wrote a guide how to upgrade to WM 6.1 lite using the bootloader method , I just sum up from this forum :
1. Download the rom file and the radio file:
Rom file from here : http://rapidshare.com/files/89355384/Treo750_WM6.1_WWE_Lite.rar
The radio file from here :
http://rapidshare.com/files/89336971/Treo750Radio1.54.07.00.rar
2. Download the Hard-SPL from here :
ftp://xda:[email protected]/Cheetah/Unlocker/CheetahUnlocker.rar
3. Format mini SD card 32 FAT , using a card reader or other way.
4. Do a HARD-SPL with the CheetahUnlocker file ( step 2) . Connect the Treo with your computer using Active sync(for WINXP) and run the file. Use those steps:
- Click the Step 1.... wait the progress bar reach 100%
- Now watch the Screen on your PDA it will launch 2 times verification...
- just click YES ...wait.. and YES again.
- after finisih... wait until the activesync go green again.....
- Now click the Step 2... wait the progress bar reach 100%
- Watch the screen again... same thing.. it will launch 2 times verification.
- click YES ...wait.. and YES again.
- After finish it your PC screen will shows some popup. ignore the reading bla bla bla... about ask u to click ok.
- Just wait untill your activesync go green again.
- Now click that bloody Popup OK button.
- The unlocker app will shows up again..
- Then you will see errors saying.. continue, cancel...etc... bla bla... just click continue.. error message.. iqnore it and then just finish it.
- Now your Cheetah should be on HARD SPL mode.
5. Install the ROM :
a. Using Winrar get the file from step 1. It's name should be : CHEEIMG.nbh
b. Copy the file to the root of the mini SD .
c. Do BOOTLOADER:
1. turn phone on
2. press the MEDIA button AND at the same time with the stylus the RESET PIN
the MEDIA button is the 3rd button on the left side of the phone, under the volume button
the RESET PIN is under the MINI SD card cover
3. keep holding the MEDIA button (left side of phone) until you get the 3 color screen
Wait until it finishes. Then Hard reset the device when prompted. To hard-reset, hold the End key while pressing the pin reset button. Answer “yes” to “Erase all data” prompt.
6. Flash the radio at the same way – just copy the radio file to the mini Sd – it should be the same name. (CHEEIMG.nbh ) .
7. Download the Palm SMS file from hereYou need it only for the lite version)
http://rapidshare.com/files/99335294/threadedsms.rar
or
http://www.megaupload.com/?d=H63TXUP4
And install it as regular software (Copy to the mini SD and run it from the Treo.)
And that it all !!
Do not restore from your backup (You can restore only your data files).
Good luck !!
Click to expand...
Click to collapse
Did everything - step by step but nothing!
still the color screen with the word serial in the bottom!
What is wrong ???
Thanks in advance,
Nir

Got it!!
Turned out vista is displaying fat32 file system no matter what the file system is...
Nir

WM 6.1 Upgrade
Can anyone tell me where the AT&T Upgrade for the Treo 750 is to version 6.1. I have seen many different posts here that show many different links and different downloads with different loading instructions. Is there anything out there that is clear? I am willing to give it a try, but I am not exactly sure of which download to try. Thanks for your help.