Related
Hi,
since a couple of days, my XDA II doesn't sync any more. It has still worked finefor a long time, since I have updated to WM6.
With my Orbit 1 async is always working fine.
When I connect it to the PC, the PC is always looking for a USB Driver.
Configuration:
Win XP; Async 4.5
XDAII WM6 by Shekhar 70C40CS
What I've tried: - changing USB-Connection and cable
- hard and Softreset
- changing USB to PC advanced network
- reinstalled async
- trying another PC
- reinstalling WM6 - no way, cause there is no USB driver
Maybe, that it is a hardware problem; but I doubt it, cause everytime, when I connect it to the PC, the PC ist trying to install a driver. So I think, there might be a software problem into the Himalaya.
Any ideas?
Sync problem - missing Driver.
Same problem with me on my notebook. Ask for help in another thread a few week ago, and got the advice to swith to active sync 4.5. I did so on my desctop and it worked wonderfull. On my notebook I stayed on as 3.8 because of my xda II and my old mda I. After I upgraded all my three xda to German WM6 i switched to as 4.5 german. I was verry suprised to get that fault window about the missing driver for that prototype thing and changing the vendor.
Not a mess I still have the desktop to install .exe and then copy the .cab files I need to my sd-cards. It´s not the known problem with the firewall (zone alarm), but it is a good question why as an the desctop works and the notebook doesn´t. Next I try to install the copied as-file from the desktop. Don´t know if it helps, I post if it does.
Hi, I had exactly the same problem, but I solved it in seconds because of Your last thread, thanx.
I had configured my windows firewall with "no exceptions".
I reactivated /checked the firewall-exceptions for ActiveSync on the PC and activated the extended networkfunctions under usb to pc on the xda and immediately everything worked fine.
Solved my problem too. Nice to help you.
Fine that I helped you, it wasn´t my purpose.
I got rid of that dammned thing about the missing driver for Prototype.
Read the hints of Jo_III in Post #28 and #31:
http://forum.xda-developers.com/showthread.php?t=341221
and follow exactly.
Insert in /windows with the name changed, rename it afterwards.
No question, why this is possible without the massage that it is impossible, as you get it, when you try to replace directly, but it works!!
Then soft reset and change /settings/connections Advanced Network Funtionality to disable/unchequed.
The funny thing with me is, that on my Dektop-PC both works.
Advanced Network Funktionality enabled the driver is for the Prototype.
This funktion disabled finds a WinCe Device.
Both works fine. No freesed PPC when disabled any more.
On my own notebook I can connect to the PC only in disabled Mode. When enabled this prototype driver problem is still there.
On the notebook of my beloved wife as4.0 recognizes the PPC an a WinCE Device but has a problem code 10. Think it´s normal as it is 4.0 and 4.5 installs new usbdriver while upgrading.
I tryed to upgrade to 4.5 and the windows installer crashed. I love it, really nice. I don´t want to fix this, I think, for me it is OK to ignore this.
This funny behavior, as i discribed it above, all my upgraded XDA/Qtek (all three of them) do.
PS. I use the German Rom of Teijalk with HTC Home and SCLPC++ Cube and I love it. Works perfekt and really fast and stable even with lots of proggis on RamDisk and few RAMStorage left, still really fast with my Pluscom WLan Card.
The Link is:
http://rapidshare.com/files/88608779/WM6ger.zip.html
More stuff like this. Thank You - thombs up!
The info above is wrong.
Only on my Qtek this solved my problem. Both of my XDA can´t deaktivate RDNIS for serial connection, when I try to uncheque Advanced Net Funktionality.
Don´t know why, I did the same on the other device without an error.
(Now I examined, that I used Port 8 twice. Once for serial to USB connection and second for external GPS connection, so it wasn´t able to deactivate this funktion anymore. I changed Port and everything is fine again.)
Final problem solved
totoche330 got the solution to my XDA sync problem in the thread above.
After Hard reset (No,Yes,Yes) inserting and renaming the dll. Soft reset and deactivating adv net funktionality. Works.
Don´t know why it didn´t work as it worked with my Qtek with all the programs installed, but dosn´t matter.
The problem of my notebook might have some reason:
The missing driver is called a Remote Network Driver Interface Specification to USB (RNDIS).
I think, I disabled everything to remote, because of one up to 25 trojan attacks.
I cured my xp, but i didn´t do a new setup. On the other hand it´s the only XP-Pro SP2. Desktop and other notebook are Home Edition SP2, but this is not important anymore. All PPC sync and that´s what it was about.
Two or three hours work and all the progs are back again. I hope, you can solve your problems too. Good Luck.
Does noone can write a driver for the cf-slot of the backpack?
Sometimes after soft reset you have to cheque and uncheque adv net funktionality inorder to get synced!!
Hello there,
I've been searching around the internet now for about 3 hours to no avail, I have even resorted to emailing HTC for help. Thats how desperate I am.
I have a MDA Vario III (HTC TYTN 2) that has worked flawlessly for a long time (since christmas) but has suddenly stopped communicating with Activesync.
Im not bothered about syncing contacts etc, all i want to do is use the file browser to download and upload photos etc.
I have tried all the suggestions i have found so far (enabling adanced network functionality, disabling it, reinstalling Activesync etc.) to no working answer.
Can anyone help me?
raty
Not sure if you tried this or not. Delete your existing partnership and then reconnect it. Good luck. Activesync sux.
Hey,
I've deleted the partnerships off my vario3, and completly reinstalled activesync. Still didnt work.
Ive taken the phone into the T-mobile shop i bought it from, they seem a little too keen to send it off for repairs, maybe this is turning into more of a regular thing that i thought?
Kept onto the phone just for now, I wnt to try and fix it before i send it off.
Uh... why send it off if you fix it?
read through this thread and look at post #10 and see if your computer is detecting the device at all..
also try removing your simcard and microSD card and connect your device to your pc in bootloader mode and see if it says USB on the bottom.
ratykat said:
Hello there,
I've been searching around the internet now for about 3 hours to no avail, I have even resorted to emailing HTC for help. Thats how desperate I am.
I have a MDA Vario III (HTC TYTN 2) that has worked flawlessly for a long time (since christmas) but has suddenly stopped communicating with Activesync.
Click to expand...
Click to collapse
It's probably the Notification queues have lost their active sync bits
use Pocket IE or Opera (mobile) to download and install something like MemMaid or SKTools
you can then add the Active Sync components back into the notification queues, and then rebuild them
Once done you should be able to sync etc
notification queues! What is that?
First I ever heard of that. I am having active sync issues as well and I have tried everything in this post.
Nothing works, it connected a few nights ago and it all of a sudden stayed connected all night. I am Back to having problems again.
Does anyone know if avast will hurt active sync?
here is your answer...
http://forum.xda-developers.com/showthread.php?t=362679
read thorugh EVERY LINK and you should be good
ive read through those links and none of them have a fix for me.
The computer recognises my phone, in device manager it comes up under Windows CE USB Devices as HTC USB Sync.
i shall try the bootloader idea and report back.
@Kimtyson- if i fix it i wont be sending it off, that would be obsurd
@pjwilkin- i have never come across that before while reading about the titan, fancy sharing some knowledge?
Just got my phone into bootloader (thanks wiki) and when the usb cable is connected it says USB and the computer starts to install drivers etc.
***bump***
sorry thats not proper foru etiquet but im desperate for som answers
Some further things to try
Can you connect via Activesync using Bluetooth? What about on other PCs and on other USB ports on your PC? What happens if you delete that HTC USB Sync listing in device manager, unplug the phone, reboot the PC and then reinstall Activesync 4.5 (I use the CDROM the phone came with the phone for that)? See if you can get the phone shop to plug it into one of their PCs with Activesync or WMDC.If it's showing up in your PCs device manager then it's likely some sort of problem/configuration issue with your desktop PC it's connecting to - not a problem with the phone itself.
this has happened to me ..
i vote for changing usb ports..
you probly already did so..
please post when you fix it..
ratykat said:
The computer recognises my phone, in device manager it comes up under Windows CE USB Devices as HTC USB Sync.
Click to expand...
Click to collapse
this cancels out any hardware problems... so do as the previous posts mentioned, its all good advice.
im assuming that all activesync services etc load up ?
I’ve had the diamond for approx 1 month and regularly sync it to my work and home pc running XP and Vista respectively. Up until now I’ve never had a problem with activesync to any of my past smartphones or PPC’s.
My diamond has all of a sudden decided that it doesn’t want to sync anymore. It connects ok and I can transfer files back and forth it just won’t sync.
I’ve searched the forum and found similar symptoms but nothing has worked.
I’ve deleted the partnership from the device and both pc’s, created new partnerships which on first connection does actually sync (sometimes) but from then on either says “looking for changes” or “synchronising” until it times out giving the error message “Synchronising cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft Activesync Troubleshooter in Microsoft Help on your desktop computer”
I’ve tried the help, I’ve let it do its own diagnostic, I’ve unchecked the “enable advanced network functionality” option in USB to PC. I’ve soft reset, hard reset, the only thing I haven’t done is re-flash a new rom.
Does anybody know if flashing a new rom/radio will solve the problem. I would normally just try it but I spent an hour yesterday after I hard reset putting everything back to the way I like it only to find that it synced the first time but wouldn’t work again.
If anyone has any other suggestions before a re-flash I would welcome them. Otherwise I’ll bite the bullet and hope for the best.
I’m currently running Duttys V1.6 Radio version 1.00.25.07
I Had this problem
Hey fella, i was having this problem and after doing a little research i found the following.. If you constantly activate and deactivate the mobile (pair and unpair) you can corrupt A/S on the system. The only way i got around this was to uninstall active sync and re-install it again.
Hope this helps...!
I've never been able to get activesync to work harmoniously between relationships with two PCs.
Most syncs with a second machine after successful syncs with a first tend to result in errors that require my intervention, especially if an item of data has been changed. Drives me mad sometimes, and I often need to spend more time fixing these errors than it would take to manually update stuff across my three devices. I get the feeling the comparison/processing engine activesync uses is no where near sophisticated or clever enough to carry out the processing, and when it does have errors, the scope for my intervention to help it in its quandary are fairly hopeless.
I'm hoping that as devices like the diamond bring this lets face, it fundamentally great, but nevertheless fundamentally flawed platform to the masses, then Microsoft will have to put more effort into activesync and how it copes with relationships across two (or perhaps even more in future) PCs.
Ps, neomagik, actual connection, which sometimes has hiccups, has never been a big problem for me, (a few minutes in the various settings usually sorts these), but I've been using activesync for about 4 years before my diamond with with my HP4700 and various double PC partnerships along the way, and can confidently say that the problems I describe are not device related, but are the result of activesync inadequacies.
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.
Been there, done that....
Suprised you've not had this issue earlier...I've been suffering with Activesync issues for years
There are lots of ways to diagnose and resolve but perhaps you just might want to get the sledgehammer out...this mostly works for me....(I hope your familiar with Outlook!)
On one PC (I would use the XP "older" Op system one) export your synced data from Outlook to a .pst or .ost file for backup and later import (after delete & tidy stuff you no longer need in Calander/Contacts/Tasks, etc)
then
Delete all your data in Outlook, create a new empty .pst (connect to same), delete old .pst
then
delete partnership with device (to be sure), and remove same data (Contacts/Calander etc) from device
then
You can then check the exported/saved .pst for errors (I can't remember the MS programme...google for it), once satisifed OK import all you info back into Outlook
then
Synchronise with new partnership to device.
Hopefully so far so good
(sometimes I even rename the device-partnersip etc in case something "residual" there stays behind and corrupts something )
Next
Prior to connecting device with WORK PC:
Delete all previously synced data in Outlook and delete partnership there. I then make sure that in Activesync (before establishing new partnership) that I click option for one way data transfer ie replace items on computer with those from device
then
...plug in and establish new partnership, hopefully no problems....data populates computer from device. Once established then put back how you prefer data to be transfered (if there is a conflict etc)
Return home and partnership there still synchronised, Hopefully this works
If you find that there are still issues, you can un-Check and Check each synced area (Contacts, Calander, Tasks, Synced Files) independently to see where the conflict is.....
...I have found conflicts mostly occur with:
i) Calander: Birthdays/Anniversarys (probably as they are extended recurring events)
ii) Calnder: Meetings etc that might be recurring
There are real issues if using old versions of Outlook (2000 for me at work ) syncing with most recent ones!!
Sorry for the mad typing but best I can do for a "Quick" reply....Good luck !!
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
Presume you have done the most obvious, and that is un-install and re-install Activesync and the Vista sync programme on both PC's ?
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
I had this once I think a year or so back. Tried so many things that I can't remember what finally fixed it.
I think a good place to start though, like PJ6363 says, is do a clean sweep... re-install activesync on both machines, and I would also reinitialise your Outlook Account (.pst) on the master PC and delete on all other devices.
Good luck, and tell us how you get on.
neomagik said:
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.[/QUOT
Neomagik... Sorry i could help any further fella.. As i said in last post i had this problem and i just re-installed A/S... The only other thing i done after i un-installed A/S was to run a registry cleaner.!
P.s i don't think is down to the Diamond. I Was having this problem with the Touch (elf) too...
Click to expand...
Click to collapse
well, i have similar issue w/ sync and finally, i solved the problem by changing the sync cable.
Thanks folks,
I'm going to try all of these.
@ Snufkin, I'm using two different sync cables so I know this is not the problem.
My diamond did funny things when the screen would turn off quickly after connecting because i set it not to charge when connected. Gave all sorts of weird errors.
Now, screen stays on because i want it to charge and sync completes now, still takes a while though.
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
pedmond said:
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
Click to expand...
Click to collapse
there is a long thread about this issue somewhere conclusion 100% in wm 6.1 you can not sync with 2 PC. this is a wm 6.1. related problem.
i can sync with 2 pC my athena with wm 6 but i can not do it with the diamond or trinity. don't even try it. it will mes you the whole outlook!
Sync with WM6.1....off course u can!
Been syncing my Kaiser and now Diamond with WM6.1 for well over a year with 2 PC's. Must have done it at least 20 times with various devices and ROM's. Kicker is that my work has W2000 & O2000, and at home I use XP and O2007....still works!!
I'm not saying I don't occasionally have issues...but I do carry more than 1000 contacts and and extended calander with numerous recurring entries
.....like I've posted before (as many others) there are issues, but nothing insurmountable. I'd be lost if I could not sync my work PC, homw PC and PDA
Read around and you'll see........
here u are, i found the thread:
http://forum.xda-developers.com/showthread.php?t=377823
i tried long and hard to sync my diamond with 2 pc. all i got is errors and double tasks and appointments. got tired and gave up! my contacts list is too precious to play with!. i do have over 600 contacts and 1300 numbers (tlf, mobile, fax).
in order to have my diamond sync with 2 pc i syinc it with one, then i sync my athena and sync with the second....lol...this is my way to have 2 pc and 2 htc devices in sync.
I had my Diamond (and previous Trinity) synced with 2 pc's. No major problems until now.
It's dead
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
neomagik said:
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
Click to expand...
Click to collapse
It looks like something other than what I have been pointing out....see here: http://forum.xda-developers.com/showthread.php?t=377823
I think you need to get serious and re-install the actual software itself on the device (hard reset), appears that Activesync on PC's is good...but would re-install there anyway!!
Look at it this way, you have found a sweet excuse to update your ROM withthe latest version and clean up your contacts/calander etc....should not be an issue with a fresh ROM install (try SwiftB 6.0....excellent!!)...let us know how you get on
Ah ha....forgot something critical...if you are syncing using older version of Windows (2000) or Outlook ...or any issues syncing for that matter, then I found that you MUST go to Settings->Connections->USB to PC and turn off Enable Advanced Network Functionality...have you done this?
Hello I've read around on this problem, and I cant find a fix for it. Orange UK HTC Diamond, I don't have the driver CD or anything but it seems it should be stored on the device itself.
I plugged it into my laptop (Vista x32 Home Premium), and first time it comes up with "Uknown device installed. Searching preconfigured drivers." It closes and nothing happens.
I have WMDC 6.1 installed, and have unchecked advanced network functionality.
If I install XP on a VMware virtual machine, will I be able to activesync to that ? (eventually I want to install HardSPL etc.)
Anyway, and hints/tips would be amazing.
vista and diamond
I just got my Diamond this weekend, I was upgrading from an HTC P4000. I was out of town (my home pc is XP) so I decided to sync my contacts over his vista machine (btw can this be done easily pda to pda? bluetooth?) The P4000 had trouble syncing with vista, took a few tries. After outlook at all my stuff from my old phone, I put my Diamond in and... nothing. Didn't see it, but it was charging. I fought Vista for about an hour to get it working, I had to download a windows mobile center patch off of microsoft, and restart the computer+phone.
When I got home to my XP machine, I plugged in and activesync took care of everything.
All the advice I can give you is try uninstalling your phone drivers (in device manager) and try different usb ports, and restart.
heres a link to the MS troubleshooting page I tried:
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
Hmm I'm starting to think it might be the standard USB connection that I'm using, do I need to use the standard HTC cable?
I've just tried phone on XP, and its bringing up the same error with Activesync 4.5
It is well-known that in vista you have to download, and install, Windows Mobile Device Center to sync any WM device, even PPCs.
So what's the deal?
Hey i'm also having this problem, spent ages trying to get it to work and tried
uninstalling and reinstalling everything but just get a message on the phone saying
install ActiveSync 4.5 on PC even though im using Vista.
Any ideas??
saj31 said:
Hey i'm also having this problem, spent ages trying to get it to work and tried
uninstalling and reinstalling everything but just get a message on the phone saying
install ActiveSync 4.5 on PC even though im using Vista.
Any ideas??
Click to expand...
Click to collapse
You can't use ActiveSync on VISTA!!! Can't you read the MANUAL or make a search?! Install Windows Mobile Device Center from MSFT site.
For God's sake, use the included CD, it has ALL you need to start synching.
I have x64 Home Premium, and it worked out of the box.
I'm happy for you but the first thing I did was install WMDC6.1, as stated in my first post, and as I said it isn't syncing with activesync on XP either
Dear All,
I am now reading over the forums for about three days. But still I dont have a solution for my sync problem. The problem is that after I flashed my kaiser it won't connect to activesync. But the STRAINGE think is, that when I put it in bootloader the computer does regonize my kaiser, and I can flash another rom on it.
I also got a MDA touch and when I am connecting that one to my computer, everything workes fine. So the problem is not in the computer. What did i already tried:
- turned off the advance USB settings on the kaiser
- reinstalled my whole WINXP and try to connect
- reflash in VISTA and WINXP
- Put the original ROM back
- check if the repplog is in the Windows file
- Put the firewall off
- Googled on every thinkeble words
So i think that the problem is in te phone, because my touch is normaly connecting. The only thing my kaiser is doing now is when i put in on the computer is recharing.
Does sombody have the knowlegde of getting my kaiser back to sync? It will let me sleep a lot better!
Regards,
Gertjan
usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon
Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?
If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.
Sorry didnt help
Fingerlickin said:
If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.
Click to expand...
Click to collapse
Thank you for your reply regarding my problem, but I changed the name and reset my device. After that he is still recharging and not connecting.
No Succes
duke911 said:
usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon
Click to expand...
Click to collapse
Thank you for your reply, i did all the things you suggested. And still nothing changed. I flashed a diffirent radio, changed the USB port and I alrady tried to sync with serveral other computers. The strainge thing was, that after a reflash of the ROM of Athene (that I use mostly) I suddenly get this problem, and before I didn't have this problem at all...
well hope that someone else can help me.
partly solved....
jorra said:
Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?
Click to expand...
Click to collapse
Dashwire? didn't know the existing of this service, so i searched it up. This service is a very good alternative for the time that I dont have activesync to work.
you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.
itzstevo said:
you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.
Click to expand...
Click to collapse
I installed the latest Garmin but still no succes..
I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.
david2327 said:
I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.
Click to expand...
Click to collapse
Nope didnt work, also tried on other computers and reflashed couple of times...
Same problem
Yes, I had the same problem as you. Some ROM will do that and some will pass that ActiveSync with no problem. Personally, I had to go back to the ATT original ROM and ActiveSync works again. Strange, but true.
I had the same issue a week ago...it ended up being the usb port on the phone...had to have it replaced. But--since you can still flash via usb, that probably isn't the problem.
I would uninstall active synch or mobile device center reboot and reinstall...then connect the device.
ok I had a strange problem last night with my wife's G1, it made me think of this thread. I solved her problem and I doubt you have the same problem but here goes anyways.
My wife just got a G1. I plugged it into my computer to load some MP3's on it for her since the G1 is supposed to act like a MicroSD card reader. It started charging but no USB connection was detected. It worked on her computer but not mine. After an hour or so I finally figured it out. The USB cable I use for my kaiser has a 3 foot USB extension on it. after using a different cable without an extension it worked. Try another USB cable.
P.S. "load some MP3's on it for her" HAHAHA I just wanted to play with her new toy!!!!!!!!!!!!
Broken?
Thanks for all the reply people, but still no succes Can the damn thing also just be broken??
Regards