Database Develop

Autoconnect A2DP when in range?

Hey Guys!
Is there a way to tell WM6 to automatically route Audio through A2DP as soon as a paired device supporting the profile is connected?
Clarification:
When using a Hands-Free-Headsetfor telephony you can pair it once, then turn it off, after that it is automatically connected to the phone as soon as you turn it on again.
In contrast to that a Bluetooth Stereo headset is not automatically connected, you have to manually activate it in Bluetooth Settings first before you can listen to music through it.
Especially with my car stereo used as "A2DP Headset" (which loses power every time the ignition is turned off) this can get highly annoying.
Is there a way to tell Windows to automatically "use" A2DP-Peripherals when available?

Try A2DP Toggle: http://www.teksoftco.com/index.php?section=freeware
The Today-plugin migt reconnect automatically, but it has a memory-leak...
To easily manually reconnect, you can create a shortcut to the exe:
\Program Files\Teksoft\A2DPToggle\A2DP.exe
Then you can put that program on your today screen easily.
And if you want a nice icon with that shortcut, you can change the shortcut file to:
53#"\Program Files\Teksoft\A2DPToggle\A2DP.exe" "-a2dp:1"?\Program Files\Teksoft\A2DPToggle\settings.exe,-0

downloadtest82 said:
Hey Guys!
Is there a way to tell WM6 to automatically route Audio through A2DP as soon as a paired device supporting the profile is connected?
Clarification:
When using a Hands-Free-Headsetfor telephony you can pair it once, then turn it off, after that it is automatically connected to the phone as soon as you turn it on again.
In contrast to that a Bluetooth Stereo headset is not automatically connected, you have to manually activate it in Bluetooth Settings first before you can listen to music through it.
Especially with my car stereo used as "A2DP Headset" (which loses power every time the ignition is turned off) this can get highly annoying.
Is there a way to tell Windows to automatically "use" A2DP-Peripherals when available?
Click to expand...
Click to collapse
Yep. The WM bluetooth stack sucks. It works better with some stereos though. I tried it out in the store with I believe a Pioneer (with bluetooth 2.0) and it was perfect. Turned it on and a2dp connects. Switch to another input and a2dp disconnects. Switch back to bluetooth audio and it connects. It was flawless. I ended up ordering the kenwood built in bluetooth unit (bluetooth v1.2) and it is terrible. I must manually toggle the bluetooth connection (I use a program that I wrote to do so, kinda similar to the above the above poster posted). Also, sometimes after a call comes in it wont reconnect. Sometimes i must power off then on the headunit a few times. Wasnt this thing supposed to make things easier?! A real shame because I love everyting else about the kenwood head unit. It works better with some ROMs on my phone (this is with a tilt; xperia on the way ).

Yeah, A2DP Toggle works for me as well, It's just dumb that this phone cant just do that itself. My old W880i could! I'm using a Sony DR-BT21G headset

JKingDev said:
A real shame because I love everyting else about the kenwood head unit. It works better with some ROMs on my phone (this is with a tilt; xperia on the way ).
Click to expand...
Click to collapse
A story to learn before you you buy the head-unit I spent almost an hour at Fry's to try many units w/ my Tilt as well (Sony, Pioneer, Kenwood, JVC ...etc) and ordered online w/ the JVC unit. Excellent sound (compare to other model) but disconnect after phone call issue exist. I believe it's HTC fault since my Eten M600 (MS BT stack) and Asus P525 (Widcomm) doesn't have this issue (but others....). But I got to admitted HTC one do have the best sound quality.
BTW, my JVC BT-1 will auto connect my X1/Tilt when I start my car and I think it serve my purpose.

Solution
wensing said:
Try A2DP Toggle: http://www.teksoftco.com/index.php?section=freeware
The Today-plugin migt reconnect automatically, but it has a memory-leak...
To easily manually reconnect, you can create a shortcut to the exe:
\Program Files\Teksoft\A2DPToggle\A2DP.exe
Then you can put that program on your today screen easily.
And if you want a nice icon with that shortcut, you can change the shortcut file to:
53#"\Program Files\Teksoft\A2DPToggle\A2DP.exe" "-a2dp:1"?\Program Files\Teksoft\A2DPToggle\settings.exe,-0
Click to expand...
Click to collapse
I have created an application wich runs the commandline setting automaticly, so you never have to do anything again it connects automaticly. You can find it here: http://forum.xda-developers.com/showthread.php?t=502549

Put Microsoft Bluetooth Stack back into Touch Pro2?

I'm using a T-Mobile Touch Pro2 which includes the Broadcom Bluetooth stack and Microsoft Voice Command 1.6.2105. The problem is the Bluetooth software is not compatible with Voice Command and I hate it.
Voice Command is unable to announce TTS events via any bluetooth headset despite having the option for that turned on. Also, activating Voice Command via a bluetooth headset button is either very slow, or unstable (doesn't work sometimes).
Has anyone been able to create a Rhodium ROM that uses the normal Microsoft Bluetooth stack, which has been known to actually work with 3rd party programs?

I had this issue and moved to NRG's Genesis 6.5 rom. everything works fine.
I have not seen a 6.1 rom that works tho.

My TMoUS TP2 works perfect with my Motorola S9's when using the MSVC that came on the stock ROM.
S

adamz said:
I'm using a T-Mobile Touch Pro2 which includes the Broadcom Bluetooth stack and Microsoft Voice Command 1.6.2105. The problem is the Bluetooth software is not compatible with Voice Command and I hate it.
Has anyone been able to create a Rhodium ROM that uses the normal Microsoft Bluetooth stack, which has been known to actually work with 3rd party programs?
Click to expand...
Click to collapse
Finally someone who has the same problems as I have.
There are also other annoying side effects of this Broadcom stack:
- As we all know the stereo output is nothing compared to for example an IPhone. Therefore I always used WOW SRS as a sound mixer which closed the gap at least to some degree on my Kaiser.
But now with the TP2 and its Broadcom stack as soon as WOW SRS is installed (I know about the different settings and driver versions to get it working, so this is not the cause) the BT stack is only connecting the hands free profile after this and the stereo profile is simply not working any more.
With the old MS stack this was not a problem.
So I'm back to the old crippled stereo output again
- One could imagine using the integrated HTC sound mixer/booster, but here another even more annoying thing comes into play:
The internal sound mixer (and also the FM radio by the way) are not working with BT at all!!!
Both are only working with a cabled headset and I found no way of getting the FM radio sound to the BT headset or using the sound mixer function on BT.
Together with the non working voice command thing this whole BT integration is so dilettantish that I can hardly believe HTC is selling it as a "professional smartphone".
If someone has any workaround for the above things I would highly appreciate it.
And of course if one of the chefs could implement the old MS BT stack in a cooked ROM this would also be a great thing, but I have not seen one so far.
But even if, I can only hope that some HTC people are reading these comments and that HTC is putting some more professionality into this issue and will soon get it together as a working whole and not as this amateurish implemantation it is currently

asango said:
Finally someone who has the same problems as I have.
There are also other annoying side effects of this Broadcom stack:
- As we all know the stereo output is nothing compared to for example an IPhone. Therefore I always used WOW SRS as a sound mixer which closed the gap at least to some degree on my Kaiser.
But now with the TP2 and its Broadcom stack as soon as WOW SRS is installed (I know about the different settings and driver versions to get it working, so this is not the cause) the BT stack is only connecting the hands free profile after this and the stereo profile is simply not working any more.
With the old MS stack this was not a problem.
So I'm back to the old crippled stereo output again
- One could imagine using the integrated HTC sound mixer/booster, but here another even more annoying thing comes into play:
The internal sound mixer (and also the FM radio by the way) are not working with BT at all!!!
Both are only working with a cabled headset and I found no way of getting the FM radio sound to the BT headset or using the sound mixer function on BT.
Together with the non working voice command thing this whole BT integration is so dilettantish that I can hardly believe HTC is selling it as a "professional smartphone".
If someone has any workaround for the above things I would highly appreciate it.
And of course if one of the chefs could implement the old MS BT stack in a cooked ROM this would also be a great thing, but I have not seen one so far.
But even if, I can only hope that some HTC people are reading these comments and that HTC is putting some more professionality into this issue and will soon get it together as a working whole and not as this amateurish implemantation it is currently
Click to expand...
Click to collapse
I to am having bluetooth problems. I have a sprint tp2. on the opposite end of you i like to use my stereo bt with my pioneer bt deck. with the tp1 i had no problems but now i cant end the call from the deck anymore, it lags when picking up the call, and some other minor bugs. the sound quality is still good.

p-slim said:
I to am having bluetooth problems. I have a sprint tp2. on the opposite end of you i like to use my stereo bt with my pioneer bt deck. with the tp1 i had no problems but now i cant end the call from the deck anymore, it lags when picking up the call, and some other minor bugs. the sound quality is still good.
Click to expand...
Click to collapse
What Pioneer headunit/Pioneer bluetooth unit are you using?
I have an AVIC-D3 with the Pioneer CD-BTB200 module for bluetooth. I have zero issues making it connect with the CD-BTB200 module. I can make calls, receive calls, play bluetooth stereo, etc. The ONLY issue that I have is that when the phone rings on an incoming call, I only hear the ring through my phone's speaker, not the speakers in my SUV. This was not an issue with the M$ Bluetooth stack, however. Go figure. If I can figure out how to make the phone sounds play through my speakers (yes, I have the send notifications/sounds box checked in the advanced bluetooth properties), everything will work 100%.

I wanted to do this, for my own as well. I think the problem we're facing is... drivers. The phone has a slightly different bt/wifi/radio module, therefore required the broadcom drivers. I'll look into making it work with the MS BT stack though... although I'm not too optimistic.

The worst thing in my opinion is the described fact that the internal FM radio and the equalizer/booster can not be used with any hooked up BT device.
Therefore listening to FM radio with BT headphones is simply not possible.
By the way I think this was also an issue in older models, so I don't think that this is a newly introduced thing with the TP2 and the Broadcom stack.
Does anyone of you guys see a solution for sending the FM radio output to the BT channel?

asango said:
Does anyone of you guys see a solution for sending the FM radio output to the BT channel?
Click to expand...
Click to collapse
No, because the cable of the wired headset is used as antenna. even if you manage to fool the radio application to start with the wired headset not connected you won't hear anything but noise.

adamz said:
I'm using a T-Mobile Touch Pro2 which includes the Broadcom Bluetooth stack and Microsoft Voice Command 1.6.2105. The problem is the Bluetooth software is not compatible with Voice Command and I hate it.
Voice Command is unable to announce TTS events via any bluetooth headset despite having the option for that turned on. Also, activating Voice Command via a bluetooth headset button is either very slow, or unstable (doesn't work sometimes).
Has anyone been able to create a Rhodium ROM that uses the normal Microsoft Bluetooth stack, which has been known to actually work with 3rd party programs?
Click to expand...
Click to collapse
asango said:
Finally someone who has the same problems as I have.
There are also other annoying side effects of this Broadcom stack:
- As we all know the stereo output is nothing compared to for example an IPhone. Therefore I always used WOW SRS as a sound mixer which closed the gap at least to some degree on my Kaiser.
But now with the TP2 and its Broadcom stack as soon as WOW SRS is installed (I know about the different settings and driver versions to get it working, so this is not the cause) the BT stack is only connecting the hands free profile after this and the stereo profile is simply not working any more.
With the old MS stack this was not a problem.
So I'm back to the old crippled stereo output again
- One could imagine using the integrated HTC sound mixer/booster, but here another even more annoying thing comes into play:
The internal sound mixer (and also the FM radio by the way) are not working with BT at all!!!
Both are only working with a cabled headset and I found no way of getting the FM radio sound to the BT headset or using the sound mixer function on BT.
Together with the non working voice command thing this whole BT integration is so dilettantish that I can hardly believe HTC is selling it as a "professional smartphone".
If someone has any workaround for the above things I would highly appreciate it.
And of course if one of the chefs could implement the old MS BT stack in a cooked ROM this would also be a great thing, but I have not seen one so far.
But even if, I can only hope that some HTC people are reading these comments and that HTC is putting some more professionality into this issue and will soon get it together as a working whole and not as this amateurish implemantation it is currently
Click to expand...
Click to collapse
p-slim said:
I to am having bluetooth problems. I have a sprint tp2. on the opposite end of you i like to use my stereo bt with my pioneer bt deck. with the tp1 i had no problems but now i cant end the call from the deck anymore, it lags when picking up the call, and some other minor bugs. the sound quality is still good.
Click to expand...
Click to collapse
ruinertt said:
What Pioneer headunit/Pioneer bluetooth unit are you using?
I have an AVIC-D3 with the Pioneer CD-BTB200 module for bluetooth. I have zero issues making it connect with the CD-BTB200 module. I can make calls, receive calls, play bluetooth stereo, etc. The ONLY issue that I have is that when the phone rings on an incoming call, I only hear the ring through my phone's speaker, not the speakers in my SUV. This was not an issue with the M$ Bluetooth stack, however. Go figure. If I can figure out how to make the phone sounds play through my speakers (yes, I have the send notifications/sounds box checked in the advanced bluetooth properties), everything will work 100%.
Click to expand...
Click to collapse
I am using a JVC deck and it connects great. Sound quality is a bit better than from my Wing; my only problem is that when I disconnect from the call it takes my TP2 2-3 minutes to show that the call is actually ended, it runs slower than molases like I have 50 programs running and all trying to access the internet and downloading large files. After the 2-3 minutes the phone has returned to normal like nothing was wrong. I am thinking of flashing to one of the good looking 6.5 roms that our wonderful chefs have cooked up for us, but I cant decide which one to try first!

asango said:
The worst thing in my opinion is the described fact that the internal FM radio and the equalizer/booster can not be used with any hooked up BT device.
Therefore listening to FM radio with BT headphones is simply not possible.
By the way I think this was also an issue in older models, so I don't think that this is a newly introduced thing with the TP2 and the Broadcom stack.
Does anyone of you guys see a solution for sending the FM radio output to the BT channel?
Click to expand...
Click to collapse
In the stock tmobile tp2 there is a app in the windows folder labeled btfm.exe I started it up but I I was only able to get about 15 seconds of audio play using my h500 motorola headset....no bt headphones to test out.

mastermarv said:
No, because the cable of the wired headset is used as antenna. even if you manage to fool the radio application to start with the wired headset not connected you won't hear anything but noise.
Click to expand...
Click to collapse
The point is that I want to be able to use the wireless BT headset with all the audio sources on the device. This would only be logical.
Having to use the wired headset as antenna is of course the other annoying thing in the hardware design of this device (since I think HTC should also have been able to get FM reception with a built in antenna or even the phone frame. Don't know why they have not done this in order to at least allow using the radio in situations where one has got no headset at hand, especially with the TP2, which has got no 3.5mm jack)
But apart from this issue still the only consequent thing would be to be able to use all audio sources with the attached wireless headset. That's what is it for...

pimppoet said:
In the stock tmobile tp2 there is a app in the windows folder labeled btfm.exe I started it up but I I was only able to get about 15 seconds of audio play using my h500 motorola headset....no bt headphones to test out.
Click to expand...
Click to collapse
Yes, this first seemed to be an option to me also, but on my TP2 if I open the btfm.exe I get absolutely no sound, no matter which speaker setting in the software. Not on the wired headphone, not on the internal speaker and also not on the BT headset, even though it is successfully attached with the stereo profile.
Have tried this with several ROMs, always the same problem: No output at all.
And on some it even won't start (error message Unable to extract skin template)
But since HTC has included this exe in the ROM but has not put a link in the start menu I think they know about this lack of functionality, but have not solved it.
Does anyone know more about btfm.exe and a way to get it working?

Hi Guys,
That is my first real complaint I have about the Touch Pro2 ! All is fine but the Widcomm stck it a bummer, my JetwareMobile Extension is now rendered useless, no more callername in my Bluetooth headset and lost some funtionality compared to befor too, but I have to be fair I gained some too, but if I need thoose that is a different topic.
Chris

Cyberon speed voice dial
Please need help to activate CSVD over BT in TP2

gompf said:
Hi Guys,
That is my first real complaint I have about the Touch Pro2 ! All is fine but the Widcomm stck it a bummer, my JetwareMobile Extension is now rendered useless, no more callername in my Bluetooth headset and lost some funtionality compared to befor too, but I have to be fair I gained some too, but if I need thoose that is a different topic.
Chris
Click to expand...
Click to collapse
I feel your pain. I miss having JetwareMobile to help interface with my car's head unit.

adamz said:
I'm using a T-Mobile Touch Pro2 which includes the Broadcom Bluetooth stack and Microsoft Voice Command 1.6.2105. The problem is the Bluetooth software is not compatible with Voice Command and I hate it.
Voice Command is unable to announce TTS events via any bluetooth headset despite having the option for that turned on. Also, activating Voice Command via a bluetooth headset button is either very slow, or unstable (doesn't work sometimes).
Has anyone been able to create a Rhodium ROM that uses the normal Microsoft Bluetooth stack, which has been known to actually work with 3rd party programs?
Click to expand...
Click to collapse
Check out this rom
http://forum.xda-developers.com/showthread.php?t=562161
it appears to do what you want.

Yes, and also the latest of NRGZ28's ROMs does have the BT triggered VC:
http://forum.xda-developers.com/showthread.php?t=562773
Seems like realls HTC has managed to get back this functionality into the latest BT stack version, even though there seem to be some bugs still in conjunction with the current V 1.6.21040 as I wrote here:
http://forum.xda-developers.com/showpost.php?p=4578993&postcount=30

Hi everyone, I have a similar question related to the Microsoft bluetooth stack. I have an ATT Tilt2 (stock ROM still) and have downloaded the Office 2010 beta programs from the Marketplace. A new feature (at least I think it is new) is the Presentation Companion for PowerPoint which allows you to control a PowerPoint presentation using your phone.
When I try to set up the Presentation Companion, however, it gives me a message about not being able to find any bluetooth devices. The instructions from Microsoft say that you must have the Microsoft bluetooth stack installed on the phone and the computer you want to control to get this functionality. I never get to the point of connecting to my computer so I figure it must be the phone.
Has anyone else had similar issues or tried the Presentation Companion? I tried applying the .CAB update listed earlier in this thread but it did not help.
On a side note, with the stock bluetooth stack I have had no issues connecting to my Pioneer headunit in my car for hands-free and A2DP stereo streaming. I have not tried to use the controls from my radio to control the playback, so I'n not sure if that works. The headunit I'm using is the DEH-710BT.
Thanks!

monkeyboy0076 said:
On a side note, with the stock bluetooth stack I have had no issues connecting to my Pioneer headunit in my car for hands-free and A2DP stereo streaming. I have not tried to use the controls from my radio to control the playback, so I'n not sure if that works. The headunit I'm using is the DEH-710BT.
Thanks!
Click to expand...
Click to collapse
I have a Pioneer AVIC-D3 and have no issues with playback (or the controls) using the BT stack in the Rhodium. This, of course, was tested with Windows Media Player. I can do forward, reverse, pause, stop, play, etc.

Bluetooth and Caller-id!!

Hi all!!
I have a Sony Ericsson HBH-DS980 bluetooth hands-free kit with an OLED display which can show everything happening on the phone (meaning Phonebook entries, call logs)!
But I have a weird problem, when accepting a call it only shows the number without the caller-id, although on the phone it is shown of course correctly!
Just after I let it ring without answering and going to call log (only using the hands-free kit) it shows it there fine!!
Does anyonbe happen to have the same issue?If I pair this hands free kit with my sony Ericsson mobile (also supporting a2dp of course) it's working fine!!
Shall I find an app from MArket, is it a matter of ROM or kernel?I'm on Froyo, just a detail
Thanks for any support!

Or in general someone already using a bluetooth kit with caller-id function working ok?
Thanks!

Parrot kit working fine here.

samsungwarrior said:
Parrot kit working fine here.
Click to expand...
Click to collapse
But it's a car kit, right?

Sorry, yes it is, but I thought it might be encouraging to know that over bluetooth on that kit. it transfers all the neccessary id info properly. I wrote it inspired by your "Or in general someone already using a bluetooth kit with caller-id function working ok?". Didn't mean to annoy.

The problem is with the android bluetooth stack.
The current version does not support transmitting caller id or music title information.
You will have to complain at google =/.

[Q] Android Tablet as bluetooth headset?

Leave phone in pocket.
Mount galaxy tab to dashboard of car.
take phone calls though galaxy tab hardwired into car audio system with external mic.
possible?

Leave phone in pocket. <-- YES
Mount galaxy tab to dashboard of car. <-- YES
take phone calls though galaxy tab hardwired into car audio system with external mic. <-- YES
I use Plantronics Bluetooth ear piece, works great, also there is a free app that allows for ALL audio from the SGT to be forced out the BT.

agreed very much possible. BT headset im using is Hisense HB200S connected to 2 of my phones at the same time.

Not really what I was thinking of. I'm saying use the tablet as a bluetooth headset. So when i jump in the car phone calls are automatically routed from my phone into the tablet which is hooked up to the audio system of my car.
so it would essentially function as a really nice car stereo but have all the added functionality of a android tablet.
data through bluetooth would be super awesome, but this is kinda shooting for the stars.

Did you find any solution?
UP

I'd love to see this too. Basically have sms and calling features on my tab, going through my phone via bluetooth.

anybody found a solution?
i have a carpc an since androidX86 (4.0.3) is out it would be great to use this as bluetooth handsfree.

i agree
split2th said:
I'd love to see this too. Basically have sms and calling features on my tab, going through my phone via bluetooth.
Click to expand...
Click to collapse
I 100% agree, I need this feature as well. We clearly are not the only ones. This essentially is centered around someone with development skills using the Bluetooth Headset Profile to have the tablet show up as bluetooth headset or handsfree to the phone.
With that it'd be great for it to pull contacts (if you dont sync contacts with google), receive texts, receive calls, dial, voice dial, etc. Out of all those, i really just want to be able to receive calls and have them routed to the tab. Everything else is a bonus.
Should we start a bounty?

Let's do..whatever, to make this happen! I would pay!
Pioneer navigation in my car can do it but I want to replace it with android. This is the only reason why I can't do it.

Closest thing i've been able to do for this is my phone is connected via bluetooth to my cars head unit. My tablet it mounted and connected to the head unit with 1/8" - 1/8" This way i can use my tablet for music and navigation and if i get a call my system will auto switch over for the call.

MarcR727 said:
Closest thing i've been able to do for this is my phone is connected via bluetooth to my cars head unit. My tablet it mounted and connected to the head unit with 1/8" - 1/8" This way i can use my tablet for music and navigation and if i get a call my system will auto switch over for the call.
Click to expand...
Click to collapse
thanks for that info, but in my case I won't have a headunit to act as the "middleman". we really need the option of the tablet itself being able to exploit the Bluetooth handsfree profile
Sent from my GT-P6210 using XDA Premium HD app

Tablet Talk 1.3.3.1 was released on 4/15 with a Call Sharing option over Bluetooth or Wifi. The feature is still in beta, but from my limited usage in the past 2 days, it seems like a viable solution to this problem. The app can be found in the market with a reasonable price tag of $2.99. For those of you looking for a carputer solution - you found it.

i actually use Tablet Talk and fully support that developer for his work, BUT the call answering feature requires either the phones speaker phone to be on or a bluetooth handsfree kit or bluetooth headset in order to work. It's not the same as the subject of this thread but it is the closest we have so far.
I've been in talks with him and he's still working on the BT stack in his spare time but makes no promises that it'll work or make it into his app.

Hi,
i 'm looking for the same possibilities, but from my iphone=>Tab=>Car-audio
TabletTalk doesn't work with iphone
What would be great is a full application on the Tab with Dialing, Contact List from the phone, the same as every caraudio BT sold nowadays...
I don't understand why it 's link to the Phone OS, because a Pioneer Car Audio BT doesn't care if it s a BB, Nokia, iphone, or an android phone : it's just A2DP/Handset server mode...
I succeeded in sharing my iphone music librairie and 3G to the tab, there 's only the phone part left :/

correction, i can't acces my iphone music lib from the tablett
i can only acces to a itune on a PC, but not directly to the iphone
I don't understand why there is no Car Audio App available, the developer would be rich !

Thank you guys, I've been looking for this for my – project for some time. Can't wait to try it out this weekend.
Sent from my highly modified HTC Rezound using Tapa 2. Yes, Swype misspelled something above.

I'm also on the hunt for the same thing, please report back if anyone finds a solution.

Same here i have been wanting to do this but with my cheap pos phone
Lg VX9200 has bluetooth and works fine with my headphones with music and calls
Android only sees it as a internet source i just want to use my tablet as a speaker phone with a big key pad
Or maybe even use google contacts and have it dial my phone
Sent from my Transformer TF101 using Tapatalk 2

Bump to keep this thread going I'll be attempting something similar in the future

This would be amazing, but unfortunately the tablet talk app will not work because it requires your car audio to be wired through your phone which would defeat the purpose. I hope the tablet talk developers can figure something out!

[Q] Is Bluetooth AVRCP 1.3 supported?

Can anyone confirm whether or not AVRCP 1.3 is supported in the stock rom?
Thanks,
John

What's the quickest way of testing that?

ianjd said:
What's the quickest way of testing that?
Click to expand...
Click to collapse
The way I tell if a device supports AVRCP 1.3 is by pairing it with the radio in my car and streaming mp3s to the radio.
If song metadata is displayed by the radio then AVRCP 1.3 is supported.
Thanks!

Yes, in my car, it pairs, displays info, plays music, etc. just like my Galaxy S2.
When I try to make a phone call from the car it pops up a message on the phone and asks me which app to use:
- phone app says something like "this device can't make calls"
- skype app completes the call just like you would expect
- for some reason Groove IP doesn't register as a phone device so it doesn't ask me if I want to use it; however, it places calls just fine, but you can't initiate it from the car for some reason. But calls play thru the bluetooth in the car fine. Sent a feature request off to the Groove guys.
DiamZ said:
The way I tell if a device supports AVRCP 1.3 is by pairing it with the radio in my car and streaming mp3s to the radio.
If song metadata is displayed by the radio then AVRCP 1.3 is supported.
Thanks!
Click to expand...
Click to collapse