Related
After countless hours of trying to get a stable version of Touch-IT Lite for the Wing on my Wing, I have finally called it quits and have gone back to the T-Mobile stock ROM.
I flashed to Touch-IT Lite for the Wing and for some unknown reason, it combined itself with the stock T-Mobile ROM! I still had the T-Mobile splash screen and all the default programs that the ROM comes with were also installed on the today screen.
I followed all of THESE directions exactly, so I don't know why I end up with the inbred child of Touch-IT Lite and T-Mobiles ROM on my device. Until I can figure out what to do, I'm staying stock.
Thanks for all the hard work Itje, I still tried!
i don't know if you tried to hard spl your device first but i'm pretty sure you must with itje's roms. i would suggest trying one of the open touch roms or icp fans roms. those are a little easier to get flashed to your phone and are excellent roms for sure. no hard spl needed
I have not tried his latest touch it roms. May be he didnt include an empty ext rom. So, the possibility is: all the programs+settings there in the ext rom are loaded in the main memory after hard reset
That rom must not have Primary Splash screens. When you decompile a rom you get 3 files: windows.nb ... PrimarySplash.nb ... Radio.nb.
Perhaps it only Flashes the windows.nbh so you will keep whatever splash screens you had on the phone -- in your case the Stock T-Mobile Spashes.
You can make you own splash screen and flash it and it will only change The first splash screen. Then you overwrite the welcomehead.96.png and change the second screen to whatever you like.
Its also possible to flash Just the radio.
As far as I know a rom will not integrate itself with another one. When you flash one it overwrites the previous one.
Personally I cannot use any of the Touch IT roms as they don't include Internet Sharing and any rom that does not have it is of no use to me. Open Touch and ICP-Touch roms are excellent!
zcink said:
That rom must not have Primary Splash screens. When you decompile a rom you get 3 files: windows.nb ... PrimarySplash.nb ... Radio.nb.
Perhaps it only Flashes the windows.nbh so you will keep whatever splash screens you had on the phone -- in your case the Stock T-Mobile Spashes.
You can make you own splash screen and flash it and it will only change The first splash screen. Then you overwrite the welcomehead.96.png and change the second screen to whatever you like.
Its also possible to flash Just the radio.
As far as I know a rom will not integrate itself with another one. When you flash one it overwrites the previous one.
Personally I cannot use any of the Touch IT roms as they don't include Internet Sharing and any rom that does not have it is of no use to me. Open Touch and ICP-Touch roms are excellent!
Click to expand...
Click to collapse
all my latest roms have internetsharing
and I have included splashscreen for quite some time now.
itje said:
all my latest roms have internetsharing
and I have included splashscreen for quite some time now.
Click to expand...
Click to collapse
I did not know that. I will have to try one. Thanks !!!
You have tried one old ROM when there are several newer ROMs to choose from. Try one of those first.
Right now I'm using Open Touch Biggy 4.0. Its pretty nice. Only problem I have is with the voice speed dial comes up all the time when I'm streaming internet radio. I had the problem with 2.7 also. Not a big fan of quick menu but you can turn it off by taking out of Startup.
I've always wanted to try a Touch IT rom but everyone I've ever tried didn't have Internet Sharing. I see they do now so I will try one.
Full Circle I'm done testing for now.
Okay after having Flashed just about every rom there is on here for the T-Mobile Wing, I have settled on one. Its fun to test -- there really are alot of good roms on here. However, from Stock to the new 6.1 build, I must say that Open Touch 3.0 zcink lite/micro is absolutely the best rom for the T-Mobile Wing for what I need.
I took it apart and used only the Windows.nb actually raising it to 6 mb pagepool to give it a little more stability. Remade it into .nbh and Flashed it, keeping my custom PrimarySplash and the newest radio.
Its totally awesome.
I took out the PBar from accessories and put the newest 1.5 into Windows/Startup. Nice. I installed the newest Battery Status over the one in there -- awesome.
Took out and deactivated all the sliding sounds in the registry -- very nice. !
So, for what its worth -- its still the absolute best rom out there.
I have Hard-SPL'ed my device, the SPL is 4.70 yang. When I flashed to CanonYang, it worked perfectly. The only affliation to T-Mobile my phone had was the branding on the case. I'm trying to flash an OS.nb ROM, not an NBH (which is definitely easier, IMHO).
ivanmmj said:
You have tried one old ROM when there are several newer ROMs to choose from. Try one of those first.
Click to expand...
Click to collapse
It was the newest ROM for the Wing that I could find. Everything else is for the Herald. I know David made a keyboard fix, but I love using ALT + Left Right arrow for IE... it's become habitual
Seriously though, it's still a released ROM... there's no reason why it shouldn't work. I downloaded the following ROMs:
TouchIT Lite for the Wing
TouchIT v2.3B
TouchIT Black
Suggestions are welcome. Anything would be better than the stock T-Mobile ROM, but right now, it's the only one that works.
I have tried all the Roms and went back to stock t-mobile Rom. Most of the Roms have all the useless stock items removed and replace with third party apps that I don't need and still have the same free space and WM6.1 needs more work. I think the cooks are doing a great job I just have not found one that fits my needs. Wish I Had time to learn how to cook so I could build a ROM with office 6.1 and ms voice command and not much else for maximum space.
Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.
Edit: We now have a whole Q&A Forum...
Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.
Scabes24 said:
Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.
Click to expand...
Click to collapse
Basically,the only clean restore would be the same ROM to the same ROM, minus PIM data.
Let's say you're running Dutty HG15 23569 and he releases HG 16 23569 with fixes, whether registry, programs whatever, you would end up restoring over the changes.
With Manila, even if you back up your own ROM and restore, its not a good idea to restore your PIM data back to Manila as its been known to cause it to crash. However PIM backup works well for this.
I'm not saying it 'won't' work, but it 'can' cause issues.
I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!
Use pim backup!!!
you better off using PIM backup and you wont screw it up...Use mortscript to create a script to install the files you need on first boot...(XDA-UC is written in Mortscript.). Just make .reg files, .cabs and what ever else you need , edit XDA-UC to your needs and you are ready to go!
Scabes24 said:
I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!
Click to expand...
Click to collapse
Force upgrade is for different ROM builds. I wouldn't use it.
I use a combination depending on what I am restoring.
For same ROM restoring, I use SPB Backup with PIM disabled, and Google sync (gmail as exchange server) for contacts, e-mail and calendar.
For different ROMs, I only restore Gmail, my exported registries such as my sound settings, owner info, and various other tweaks I apply and databases.
Naturally any program specific settings would be fine.
As far as registries and system files, you could be restoring something that's incompatible or an older version.
Sashimi and User Config are 2 alternatives for auto installing your stuff.
Hope this helps.
Yeah I use XDA_UC with very few configs cuz I'm never sure if certain stuff will restore correctly. I seem to have trouble with settings exporter.
How do I restore specific program configs (bsbtweaks, advanced config, Tabs) without using the UC exporter or a full restore? Can I do it with SPB?
Because I like UC but just for CABs and PIMrestore (sometimes CHTedits)..
Sorry for all the Q's, I've been flashin a lot lately and always end up doin manual config labor and soft reseting a million times. But thanks a lot for the help!
I should note that the reason I don't use the Exporter is because I used it a bit before and when I would import the settings the bottom row of quicklinks would be all mangled and everything seemed glitchy. does this mean I was doing something wrong? I'm not sure but I think I remember NRGZ28 mentioning something in the changelog about an update/fix for UC so maybe I just need to try again.
How can I tell which Hard SPL / Factory SPL I have?
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!
snailspeeder said:
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!
Click to expand...
Click to collapse
It should say
SPL-2.51.OliNex or 1.83.OliNex
And it depends on the error you encountered. Did you try the upgrade already?
Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?
snailspeeder said:
Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?
Click to expand...
Click to collapse
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.
SPL-1.83.0000 is the stock SPL I'm pretty sure by the way
Scabes24 said:
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.
Click to expand...
Click to collapse
I tried again following their "automatic flash" but then I got the error of the server being down or something. I will try again. I have flashed ROMs on other phones, but this one is giving me a bit of a problem. I also tried the Manual version, but it didn't put the phone in the bootloader mode, it kinda just stood there.
So you followed the directions like they posted? Any other hints or tips? I installed the enablerapinew too.
EDIT:
I figured it out, I am such an idiot. Thanks for your help. After installing the enable I did a soft reset. That was what I did not do. Thanks. Any recommendation on a stable ROM? I am looking at Nhathoa's
Nice, yeah NhatHoa is good. I've been using the Energy ROMs.. close-to-stock and fully loaded versions available.
begin with htc pure rom install
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Check out this thread first, it is the pre-guide to learn the basic:
forum.xda-developers.com/showthread.php?t=585457[/url]
knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Do you have Hard-SPL already?
Can't get sms dialog to automatically rotate to landscape mode
Hmm, I'm still not sure if this is the right thread to ask a general, non-rom-development topaz question... It says so in the first post, but the thread is located in the rom development section - strange...
Anyway, I'll try: I'm using the latest cookie sense 2.5 energy rom for my diamond2, but the problem existed on all previous (energy) rom versions - whatever I try to add to the touch tools' rotation manager (or g-config), I can't get the sms writing dialog (htc "threaded" or "normal" version) to automatically rotate to landscape mode when I turn my phone. Nothing happens... I have a default hard button assigned for doing that and that works flawlessly. Other apps added to g-config rotate automatically...
I'm desperate, anyone willing to help? Is there some setting I have to enable or some registry tweak to apply or something? I searched the forum but users don't seem to have any problems with that, so I must be doing something wrong...
Thanks!
About the Touch diamond 2 Resitive touch screen problems ^^; , My Lovely diamond 2 if there cold , My diamond 2 automatically Touch in the center .. , Can you help me ?
Hello there
I am a new user of htc dream and I wonder if anyone could help me with my upgrading of rom.
I searched and now considering that the rom of Super Aosp DM 2.8.2 is nice ,but i can not find where to download it, can someone give me the link ?
by the way,as i am not very sure how to upgrade .i hope some one could give me some advices .
what i got on my phone:
Recovery:ClockWork
Radio: 2.22.19.26i
SPL: 1.33.2005
ROM: 2.1 update 1
so what i need to do ? do i have to flash the radio,spl or anything else ?if so,where to get it and follow what order?
any help ,thanks!!
Here you go. Download for SuperAosp DM 2.8.2. FYI, the site is in Spanish so you'll have to do the traanslation.
qujiujiu said:
Hello there
I am a new user of htc dream and I wonder if anyone could help me with my upgrading of rom.
I searched and now considering that the rom of Super Aosp DM 2.8.2 is nice ,but i can not find where to download it, can someone give me the link ?
by the way,as i am not very sure how to upgrade .i hope some one could give me some advices .
what i got on my phone:
Recovery:ClockWork
Radio: 2.22.19.26i
SPL: 1.33.2005
ROM: 2.1 update 1
so what i need to do ? do i have to flash the radio,spl or anything else ?if so,where to get it and follow what order?
any help ,thanks!!
Click to expand...
Click to collapse
BTW! You want to update your radio / SPL to 27.08 (radio) and 13d (SPL) Your current SPL/radio will not work with this ROM. Also, after you flashed the ROM alos flash the 15MB boot behind it. Then your ROM will not get stuck at the splash screen.
MAKE SURE THAT YOU HAVE ROOTED YOUR PHONE!
DISCLAIMER: I am not responsilble if you bricked your G1.
What you want to do is to make sure you have Amon RA Recovery loaded first.
copy everything into your root SD card. (IE: SPL, radio, ROM and the 15MB-root).
Boot into RA Recovery.
Flash radio and SPL.
Flash the ROM.
Flash 15MB-boot.
Reboot and wait until your phone finish loading.... (DO NOT TAKE OUT YOUR BATTERY)
Enjoy!
Thanks！！！ thouth once stuck at the splash img ,i now have updated it successfully!
lot to do ,ha,thanks again .
You're welcome. Let me know the outcome of the flash.
You'll love this ROM like I do, only one thing about this ROM (but I can live with it) is that the coder is from Spain (or that area), and I think he accidentally hardcode some of the thing in his language in the setting area. But the words are understandable.
internal storage:58MB free ,33MB used
running ram:28MB free
no swapon
how comes this ? any thing wrong? by the way,the input method i installled sometimes don't work well,any solutions?
Hmm, did you run all the flash including the 15MB-boot file? Try to run that again. Also what radio do u have as of now?
Also, go to setting >> SupSetup >> Options >> App2SD and LinuxSwap
You can adjust the steeing in that area to your liking. Some of them will make you reboot your phone.
You can activate App2SD and the Linux Swap in that area. There are a lot of Setting in the SupSetup that can optimize your phone. You'll have to play with it until you get the setting you like. Even with the default setting, it will be good.
I just picked another rom,for one reason,i found it a little unconvenience for me with my phone language as English,as i am from China.maybe i'll try it latter,thanks anyway
LOL! You are welcome, I do understand totally.
BeenAndroidized said:
LOL! You are welcome, I do understand totally.
Click to expand...
Click to collapse
hey,
i am back again! here is the good news:a few days ago some one has localized the AOSP DM 2.8.2 and now i am back again !with 88.89MB memory available and swapon,it runs smothly as you say,now i got all i have and it still have 70MB memory free.Despite some little problem,everything goes well!so here i would like to share this with you and thanks again.
qujiujiu said:
hey,
i am back again! here is the good news:a few days ago some one has localized the AOSP DM 2.8.2 and now i am back again !with 88.89MB memory available and swapon,it runs smothly as you say,now i got all i have and it still have 70MB memory free.Despite some little problem,everything goes well!so here i would like to share this with you and thanks again.
Click to expand...
Click to collapse
What are the little problem? I will try to assist. I think I solved most if not all the small gliches on my end.
BeenAndroidized said:
What are the little problem? I will try to assist. I think I solved most if not all the small gliches on my end.
Click to expand...
Click to collapse
Thanks for your concern .It's just that for several times i have met this:for example,for some of the adw's settings and some other settings where there was a upper window ,it seemed not to display correctly, i had to open the keyboard to let the window show.maybe it was because the animination plugin（i did not know the English name）,recently i turned off the animination and it turned out to be just ok .now everything seems to be fine .
Here is another question.the GPS never worked out,it probaly not about this ROM 'cause for the earlier ones the GPS did not work either(it just cannot find singnal ).i think it's the GPS modual's problem ,any sugguestions?
Ｓorry for the delay and thanks again for your concern .lol
It's not the ROM, I am pretty sure of. Personnally I turn GPS off, because I don't use it.
As far as the ADW, I suggested that you replace that with other Launcher (IE: Go Launcher EX, or LauncherPro) ADW seem to not work too well. But if you have that thing works the way you want then that is fine.
Hello new here and was wondering if HBOOT-1.33.0013d, Radio-2.22.27.08 can boot old 1.5 hero roms i tried but seems to get stuck at HTC splash screen am i missing something? can anyone point me in the right direction? thanks.
DREAM PVT 32B SHIP S-ON
HBOOT-1.33.0013d
CPLD-4
Radio-2.22.27.08
You need an adapted kernel for this, but I doubt you will find it ...
Alright thanks
why bother with 1.5 sense anyway... just flash a newer sense rom with 2708 kernel...
dont search for roms in the rom bible lol its old and out-dated
well i was using SenseLX (Great Rom) and i wasn't receiving messages and i use camcorder here and there and i know the camcorder was working on 1.5 hero. going to go head and give SenseLX another go and see if i can receive messages
the message issue is 1 of 2 things... minfree values are set too high.. or 'ATK' if your using it... uncheck messages on kill list so it never gets terminated.. still trying to solve that issue, sorry lol i actually need a tester who can flash the rom without minfree to see if this helps with mms issue... if you are willing to try?
yea i will try right now so just flash and uncheck messages on kill list?
ok just got back to my phone didn't flash minfree, ATK set to ultimate i didn't uncheck messages i wanted to see if ATK set to ultimate was causing the mms problem but mms is working now anything else you would like me to test?
no thats all i needed to know thanks for the testing, so i will try lowering minfree values. if you want to test that? lol trying to make it so you dont need a task killer app
sounds good let me know when its ready